app
s
|
Applicant Information
|
|
1 2
|
Effective |
2011-07-19
|
1 2
|
2011-06-21
|
1 2
|
Applicant's complete, legal business name |
Qualcomm Atheros, Inc.
|
1 2
|
FCC Registration Number (FRN) |
0003716743
|
1 2
|
Physical Address |
1700 Technology Dr
|
1 2
|
San Jose, California 95110
|
1 2
|
United States
|
|
app
s
|
TCB Information
|
1 2
|
TCB Application Email Address |
c******@ccsemc.com
|
1 2
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|
app
s
|
FCC ID
|
1 2
|
Grantee Code |
PPD
|
1 2
|
Equipment Product Code |
AR4100
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
1 2
|
Name |
P**** G********
|
1 2
|
Title |
Vice President, Regulatory Engineering
|
1 2
|
Telephone Number |
858-6********
|
1 2
|
Fax Number |
858-6********
|
1 2
|
E-mail |
p******@qti.qualcomm.com
|
|
app
s
|
Technical Contact
|
|
|
n/a |
|
app
s
|
Non Technical Contact
|
|
|
n/a |
|
app
s
|
Confidentiality (long or short term)
|
1 2 |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
1 2 | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
1 2 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 01/15/2012 |
1 2 | 12/18/2011 |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
1 2 |
Is this application for software defined/cognitive radio authorization? | No |
1 2 | Equipment Class | DTS - Digital Transmission System |
1 2 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Single Band 1x1 802.11bgn SiP |
1 2 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
1 2 | Modular Equipment Type | Limited Single Modular Approval |
1 2 | Purpose / Application is for | Class II permissive change or modification of presently authorized equipment |
1 2 | Original Equipment |
1 2 | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | No |
1 2 | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
1 2 | Grant Comments | This Class II Permissive Change filing is to allow this module to be used in stand-alone portable exposure condition without restriction on host platform with the most conservative antenna to user separations of 1.1 cm for PIFA Antenna, 1.7 cm for PCB Antenna and 0.4 cm for Chip Antenna as documented in this filing. Limited Modular Approval (LMA). Power Output listed is conducted. Approval is limited to OEM installation only. For Mobile RF Exposure configurations the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except with established multiple transmitter procedures. OEM integrators must be provided with antenna installation instructions as defined in this filing. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided.
The highest reported body-SAR is 0.392W/kg |
1 2 | Limited Modular Approval (LMA). Power Output listed is conducted. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except with established multiple transmitter procedures. OEM integrators must be provided with antenna installation instructions as defined in this filing. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. |
1 2 | Is there an equipment authorization waiver associated with this application? | No |
1 2 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
app
s
|
Test Firm Name and Contact Information
|
1 2
|
Firm Name |
Sporton International Inc.
|
1 2
|
Bureau Veritas CPS (H.K.) Ltd., Taoyuan Branch
|
1 2
|
Name |
A**** C********
|
1 2
|
K******** L******
|
1 2
|
Telephone Number |
886-3******** Extension:
|
1 2
|
+886-******** Extension:
|
1 2
|
Fax Number |
886-3********
|
1 2
|
+886-********
|
1 2
|
E-mail |
a******@sporton.com.tw
|
1 2
|
k******@tw.bureauveritas.com
|
|