app
s
|
Applicant Information
|
|
1 2 3 4 5 6 7 8
|
Effective |
2012-03-15
|
1 2 3 4 5 6 7 8
|
2011-09-08
|
1 2 3 4 5 6 7 8
|
2011-09-06
|
1 2 3 4 5 6 7 8
|
Applicant's complete, legal business name |
Qualcomm Atheros, Inc.
|
1 2 3 4 5 6 7 8
|
FCC Registration Number (FRN) |
0003716743
|
1 2 3 4 5 6 7 8
|
Physical Address |
1700 Technology Dr
|
1 2 3 4 5 6 7 8
|
San Jose, California 95110
|
1 2 3 4 5 6 7 8
|
United States
|
|
app
s
|
TCB Information
|
1 2 3 4 5 6 7 8
|
TCB Application Email Address |
c******@ccsemc.com
|
1 2 3 4 5 6 7 8
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|
app
s
|
FCC ID
|
1 2 3 4 5 6 7 8
|
Grantee Code |
PPD
|
1 2 3 4 5 6 7 8
|
Equipment Product Code |
AR5B197
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
1 2 3 4 5 6 7 8
|
Name |
P**** G********
|
1 2 3 4 5 6 7 8
|
Title |
Vice President, Regulatory Engineering
|
1 2 3 4 5 6 7 8
|
Telephone Number |
858-6********
|
1 2 3 4 5 6 7 8
|
Fax Number |
858-6********
|
1 2 3 4 5 6 7 8
|
E-mail |
p******@qti.qualcomm.com
|
|
app
s
|
Technical Contact
|
|
|
n/a |
|
app
s
|
Non Technical Contact
|
|
|
n/a |
|
app
s
|
Confidentiality (long or short term)
|
1 2 3 4 5 6 7 8 |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
1 2 3 4 5 6 7 8 | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
1 2 3 4 5 6 7 8 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 09/11/2012 |
1 2 3 4 5 6 7 8 | 03/06/2012 |
1 2 3 4 5 6 7 8 | 03/04/2012 |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
1 2 3 4 5 6 7 8 |
Is this application for software defined/cognitive radio authorization? | No |
1 2 3 4 5 6 7 8 | Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
1 2 3 4 5 6 7 8 | DTS - Digital Transmission System |
1 2 3 4 5 6 7 8 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | AR5B197 2x2 802.11n - BT Combo Card |
1 2 3 4 5 6 7 8 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
1 2 3 4 5 6 7 8 | Modular Equipment Type | Single Modular Approval |
1 2 3 4 5 6 7 8 | Purpose / Application is for | Class II permissive change or modification of presently authorized equipment |
1 2 3 4 5 6 7 8 | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
1 2 3 4 5 6 7 8 | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
1 2 3 4 5 6 7 8 | Grant Comments | Class II Permissive change to allow use in portable host (IdeaPad Y580) as detailed in this filing.
Modular approval. Power listed is conducted. Device is 802.11bgn with Bluetooth combo PCI-E card, operating in a 2x2 Spatial Multiplexing/Cyclic Delay Diversity MIMO configuration as described in this filing. This module may only be installed by the OEM or an OEM integrator. The antenna(s) used for this device must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators and end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. |
1 2 3 4 5 6 7 8 | Class II Permissive change to allow use in portable hosts (IdeaPad Y480) as detailed in this filing.
Modular approval. This module may only be installed by the OEM or an OEM integrator. The antenna(s) used for this device must be installed to provide a separation distance of at least 3 cm from all persons, the separation distance between Main/Aux shall be at least 3 cm when positioned horizontally and 9 cm when positioned vertically. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation.
The highest measured SAR for this Permissive Change filing is: 0.29 W/kg. The highest measured SAR value across all filings under this FCC ID is 0.48 W/Kg. |
1 2 3 4 5 6 7 8 | Class II Permissive change to allow use in portable hosts (IdeaPad Y580) as detailed in this filing.
Modular approval. This module may only be installed by the OEM or an OEM integrator. The antenna(s) used for this device must be installed to provide a separation distance of at least 3 cm from all persons, the separation distance between Main/Aux shall be at least 3 cm when positioned horizontally and 9 cm when positioned vertically. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation.
The highest measured SAR for this Permissive Change filing is: 0.40 W/kg. The highest measured SAR value across all filings under this FCC ID is 0.48 W/Kg. |
1 2 3 4 5 6 7 8 | Class II Permissive change to allow use in portable host (IdeaPad Y480) as detailed in this filing.
Modular approval. Power listed is conducted. Device is 802.11bgn with Bluetooth combo PCI-E card, operating in a 2x2 Spatial Multiplexing/Cyclic Delay Diversity MIMO configuration as described in this filing. This module may only be installed by the OEM or an OEM integrator. The antenna(s) used for this device must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators and end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. |
1 2 3 4 5 6 7 8 | Class II Permissive Change application to alternate a portable host as documented in this filing. Modular approval. Power listed is conducted. Device is 802.11bgn with Bluetooth combo PCI-E card, operating in a 2x2 Spatial Multiplexing/Cyclic Delay Diversity MIMO configuration as described in this filing. This module may only be installed by the OEM or an OEM integrator. The antenna(s) used for this device must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators and end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. |
1 2 3 4 5 6 7 8 | Class II Permissive Change application to alternate a portable host as documented in this filing. Modular approval. Power listed is the maximum combined peak conducted output power. Device is 802.11bgn with Bluetooth combo PCI-E card, operating in a 2x2 Spatial Multiplexing/Cyclic Delay Diversity MIMO configuration as described in this filing. This module may only be installed by the OEM or an OEM integrator. The antenna(s) used for this device must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators and end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. Highest reported body SAR is 0.48W/kg. |
1 2 3 4 5 6 7 8 | Class II Permissive Change application to alternate a portable host as documented in this filing. Modular approval. Power listed is conducted. Device is 802.11bgn with Bluetooth combo PCI-E card, operating in a 2x2 Spatial Multiplexing/Cyclic Delay Diversity MIMO configuration as described in this filing. This module may only be installed by the OEM or an OEM integrator. The antenna(s) used for this device must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures.
OEM integrators and end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. |
1 2 3 4 5 6 7 8 | Is there an equipment authorization waiver associated with this application? | No |
1 2 3 4 5 6 7 8 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
app
s
|
Test Firm Name and Contact Information
|
1 2 3 4 5 6 7 8
|
Firm Name |
Compliance Certification Services Inc.
|
1 2 3 4 5 6 7 8
|
Name |
H****** L********
|
1 2 3 4 5 6 7 8
|
Telephone Number |
886-2******** Extension:
|
1 2 3 4 5 6 7 8
|
Fax Number |
886-2********
|
1 2 3 4 5 6 7 8
|
E-mail |
h******@sgs.com
|
|