app
s
|
Applicant Information
|
|
1 2 3 4 5 6 7 8 9
|
Effective |
2012-03-15
|
1 2 3 4 5 6 7 8 9
|
2011-12-16
|
1 2 3 4 5 6 7 8 9
|
2011-07-27
|
1 2 3 4 5 6 7 8 9
|
2009-12-10
|
1 2 3 4 5 6 7 8 9
|
2009-11-24
|
1 2 3 4 5 6 7 8 9
|
2009-08-19
|
1 2 3 4 5 6 7 8 9
|
2008-12-12
|
1 2 3 4 5 6 7 8 9
|
Applicant's complete, legal business name |
Qualcomm Atheros, Inc.
|
1 2 3 4 5 6 7 8 9
|
FCC Registration Number (FRN) |
0003716743
|
1 2 3 4 5 6 7 8 9
|
Physical Address |
1700 Technology Dr
|
1 2 3 4 5 6 7 8 9
|
San Jose, California 95110
|
1 2 3 4 5 6 7 8 9
|
United States
|
|
app
s
|
TCB Information
|
1 2 3 4 5 6 7 8 9
|
TCB Application Email Address |
c******@ccsemc.com
|
1 2 3 4 5 6 7 8 9
|
m******@ccsemc.com
|
1 2 3 4 5 6 7 8 9
|
m******@CCSEMC.COM
|
1 2 3 4 5 6 7 8 9
|
m******@ccsemc.com
|
1 2 3 4 5 6 7 8 9
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
1 2 3 4 5 6 7 8 9
|
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
|
app
s
|
FCC ID
|
1 2 3 4 5 6 7 8 9
|
Grantee Code |
PPD
|
1 2 3 4 5 6 7 8 9
|
Equipment Product Code |
AR5B95
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
1 2 3 4 5 6 7 8 9
|
Name |
P****** G********
|
1 2 3 4 5 6 7 8 9
|
Title |
Vice President, Regulatory Engineering
|
1 2 3 4 5 6 7 8 9
|
Telephone Number |
858-6********
|
1 2 3 4 5 6 7 8 9
|
Fax Number |
858-6********
|
1 2 3 4 5 6 7 8 9
|
E-mail |
p******@qti.qualcomm.com
|
|
app
s
|
Technical Contact
|
1 2 3 4 5 6 7 8 9
|
Firm Name |
COMPLIANCE CERTIFICATION SERVICES
|
1 2 3 4 5 6 7 8 9
|
Name |
T**** C********
|
1 2 3 4 5 6 7 8 9
|
Physical Address |
47173 Benicia Street
|
1 2 3 4 5 6 7 8 9
|
Fremont, 94538
|
1 2 3 4 5 6 7 8 9
|
United States
|
1 2 3 4 5 6 7 8 9
|
Telephone Number |
(510)********
|
1 2 3 4 5 6 7 8 9
|
E-mail |
T******@CCSEMC.COM
|
|
app
s
|
Non Technical Contact
|
1 2 3 4 5 6 7 8 9
|
Firm Name |
COMPLIANCE CERTIFICATION SERVICES
|
1 2 3 4 5 6 7 8 9
|
Name |
T**** C********
|
1 2 3 4 5 6 7 8 9
|
Physical Address |
47173 Benicia Street
|
1 2 3 4 5 6 7 8 9
|
Fremont, 94538
|
1 2 3 4 5 6 7 8 9
|
United States
|
1 2 3 4 5 6 7 8 9
|
Telephone Number |
(510)********
|
1 2 3 4 5 6 7 8 9
|
E-mail |
T******@CCSEMC.COM
|
|
app
s
|
Confidentiality (long or short term)
|
1 2 3 4 5 6 7 8 9 |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
1 2 3 4 5 6 7 8 9 | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
1 2 3 4 5 6 7 8 9 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 09/11/2012 |
1 2 3 4 5 6 7 8 9 | 06/12/2012 |
1 2 3 4 5 6 7 8 9 | 01/23/2012 |
1 2 3 4 5 6 7 8 9 | 01/07/2010 |
1 2 3 4 5 6 7 8 9 | 05/19/2010 |
1 2 3 4 5 6 7 8 9 | 02/13/2020 |
1 2 3 4 5 6 7 8 9 | 01/26/2009 |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
1 2 3 4 5 6 7 8 9 |
Is this application for software defined/cognitive radio authorization? | No |
1 2 3 4 5 6 7 8 9 | Equipment Class | DTS - Digital Transmission System |
1 2 3 4 5 6 7 8 9 | JBP - Part 15 Class B Computing Device Peripheral |
1 2 3 4 5 6 7 8 9 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | 802.11n 1x1 PCIe Minicard Transceiver |
1 2 3 4 5 6 7 8 9 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
1 2 3 4 5 6 7 8 9 | Modular Equipment Type | Limited Single Modular Approval |
1 2 3 4 5 6 7 8 9 | Single Modular Approval |
1 2 3 4 5 6 7 8 9 | Purpose / Application is for | Class II permissive change or modification of presently authorized equipment |
1 2 3 4 5 6 7 8 9 | Original Equipment |
1 2 3 4 5 6 7 8 9 | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
1 2 3 4 5 6 7 8 9 | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
1 2 3 4 5 6 7 8 9 | Grant Comments | Class II Permissive change to allow use in portable host (IdeaPad Y580) as detailed in this filing.
Modular approval. Output power listed is conducted. This module may only be installed by the OEM or an OEM integrator. Only antenna(s) documented in this filing may be used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. OEM integrators and End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
The highest measured SAR for this Permissive Change filing is: 0.29 W/kg. The highest measured SAR value across all filings under this FCC ID is 0.69 W/Kg. |
1 2 3 4 5 6 7 8 9 | Class II Permissive change to allow use in portable host (IdeaPad Y480) as detailed in this filing.
Modular approval. Output power listed is conducted. This module may only be installed by the OEM or an OEM integrator. Only antenna(s) documented in this filing may be used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. OEM integrators and End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
The highest measured SAR for this Permissive Change filing is: 0.69 W/kg. The highest measured SAR value across all filings under this FCC ID is 0.69 W/Kg. |
1 2 3 4 5 6 7 8 9 | Class II Permissive Change to allow portable configurations in specific hosts as documented in this filing. Modular approval. Output power listed is conducted. This module may only be installed by the OEM or an OEM integrator. Only antenna(s) documented in this filing may be used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. OEM integrators and End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each individual transmitter they choose to incorporate into a host product. Highest measured body SAR values as documented in this filing is: 0.668 W/kg. |
1 2 3 4 5 6 7 8 9 | Class II Permissive Change to add the portable configuration as documented in this filing. The highest measured body SAR documented in this filing is 0.011W/kg at lap held configuration, 0.124W/kg at bystander configuration with 1.5cm separation distance. Modular approval. Output power listed is conducted. This module may only be installed by the OEM or an OEM integrator. Only antenna(s) documented in this filing may be used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. OEM integrators and End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.The overall highest measured SAR for the Netbook/Laptop/Notebook/Tablet host platform is 1.13W/kg with a separation distance of 2.18 cm as described under this FCC ID. |
1 2 3 4 5 6 7 8 9 | Class II Permissive Change to establish the most conservative antenna-to-user separation distance of 6.5 cm for Netbook/Notebook/Laptop PC. Output power listed is conducted. This module may only be installed by the OEM or an OEM integrator. Only antenna(s) documented under this FCC ID number may be used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons as mobile device per section 2.1091. Installation in other portable/mobile host products is allowed in accordance with FCC notebook/module procedures. Simultaneous transmitters are allowed in portable/mobile products in accordance with FCC multi-transmitter product procedures within the limitations of the installation guidelines document included with the permissive change filing. Compliance of this device in all final product configurations is the responsibility of the Grantee; installation of this device into specific final products may require the submission of a permissive change application, where appropriate, containing data demonstrating compliance for SAR, spurious emissions, and host / module authentication, or new application if appropriate. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each individual transmitter they choose to incorporate into a host product. The highest measured body SAR value @ 6.5 cm antenna-to-user separation distance in Netbook/Notebook/Laptop PC platform are: 0.068 W/kg |
1 2 3 4 5 6 7 8 9 | Class II Permissive Change to allow portable configurations in specific hosts aas described in this filing. Output power listed is conducted. This module may only be installed by the OEM or an OEM integrator. Only antenna(s) documented in this filing may be used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. OEM integrators and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. End users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This transmitter is approved for use in configurations specified in the application filing. Additional equipment authorization is required for changes that result in the need for SAR evaluation. Highest measured body SAR value as documented in this filing is 0.00772 W/kg. Highest measured body SAR value as documented for this FCCID is 0.035 W/kg |
1 2 3 4 5 6 7 8 9 | Class II Permissive Change. Output power listed is conducted. This module may be installed only by the OEM or an OEM integrator. Only antenna(s) documented in this filing may be used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except as described in this filing or in accordance with FCC multi-transmitter product procedures. OEM integrators and End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The highest reported body SAR under this FCCID is 0.035 W/kg. |
1 2 3 4 5 6 7 8 9 | Modular approval. Output power listed is conducted. This module may only be installed by the OEM or an OEM integrator. Only antenna(s) documented in this filing may be used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. OEM integrators and End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
1 2 3 4 5 6 7 8 9 | Is there an equipment authorization waiver associated with this application? | No |
1 2 3 4 5 6 7 8 9 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
app
s
|
Test Firm Name and Contact Information
|
1 2 3 4 5 6 7 8 9
|
Firm Name |
Compliance Certification Services Inc.
|
1 2 3 4 5 6 7 8 9
|
Cerpass Technology Corporation
|
1 2 3 4 5 6 7 8 9
|
Compliance Certification Services
|
1 2 3 4 5 6 7 8 9
|
Sporton International Inc.
|
1 2 3 4 5 6 7 8 9
|
Name |
H**** L********
|
1 2 3 4 5 6 7 8 9
|
E******** C****
|
1 2 3 4 5 6 7 8 9
|
T**** C****
|
1 2 3 4 5 6 7 8 9
|
A****** C******
|
1 2 3 4 5 6 7 8 9
|
B******** J****
|
1 2 3 4 5 6 7 8 9
|
Telephone Number |
886-2******** Extension:
|
1 2 3 4 5 6 7 8 9
|
886-2******** Extension:
|
1 2 3 4 5 6 7 8 9
|
510-7********
|
1 2 3 4 5 6 7 8 9
|
886-3******** Extension:
|
1 2 3 4 5 6 7 8 9
|
510-7********
|
1 2 3 4 5 6 7 8 9
|
Fax Number |
886-2********
|
1 2 3 4 5 6 7 8 9
|
886-2********
|
1 2 3 4 5 6 7 8 9
|
510-6********
|
1 2 3 4 5 6 7 8 9
|
886-3********
|
1 2 3 4 5 6 7 8 9
|
E-mail |
h******@sgs.com
|
1 2 3 4 5 6 7 8 9
|
e******@cerpass.com.tw
|
1 2 3 4 5 6 7 8 9
|
t******@ccsemc.com
|
1 2 3 4 5 6 7 8 9
|
a******@sporton.com.tw
|
1 2 3 4 5 6 7 8 9
|
b******@ccsemc.com
|
|