app
s
|
Applicant Information
|
|
1 2 3 4
|
Effective |
2011-05-19
|
1 2 3 4
|
Applicant's complete, legal business name |
Qualcomm Atheros, Inc.
|
1 2 3 4
|
FCC Registration Number (FRN) |
0003716743
|
1 2 3 4
|
Physical Address |
1700 Technology Dr
|
1 2 3 4
|
San Jose, California 95110
|
1 2 3 4
|
United States
|
|
app
s
|
TCB Information
|
1 2 3 4
|
TCB Application Email Address |
c******@ccsemc.com
|
1 2 3 4
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
1 2 3 4
|
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
|
app
s
|
FCC ID
|
1 2 3 4
|
Grantee Code |
PPD
|
1 2 3 4
|
Equipment Product Code |
ARS42
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
1 2 3 4
|
Name |
P**** G******
|
1 2 3 4
|
Title |
Vice President, Regulatory Engineering
|
1 2 3 4
|
Telephone Number |
858-6********
|
1 2 3 4
|
Fax Number |
858-6********
|
1 2 3 4
|
E-mail |
p******@qti.qualcomm.com
|
|
app
s
|
Technical Contact
|
|
|
n/a |
|
app
s
|
Non Technical Contact
|
|
|
n/a |
|
app
s
|
Confidentiality (long or short term)
|
1 2 3 4 |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
1 2 3 4 | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
1 2 3 4 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 11/15/2011 |
1 2 3 4 | 07/03/2011 |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
1 2 3 4 |
Is this application for software defined/cognitive radio authorization? | No |
1 2 3 4 | Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
1 2 3 4 | DTS - Digital Transmission System |
1 2 3 4 | JBP - Part 15 Class B Computing Device Peripheral |
1 2 3 4 | NII - Unlicensed National Information Infrastructure TX |
1 2 3 4 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | 802.11a/b/g/n WLAN + Bluetooth Combo module |
1 2 3 4 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
1 2 3 4 | Modular Equipment Type | Single Modular Approval |
1 2 3 4 | Does not apply |
1 2 3 4 | Purpose / Application is for | Original Equipment |
1 2 3 4 | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
1 2 3 4 | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
1 2 3 4 | Grant Comments | Modular Approval. Power Output listed is Conducted. Approval is limited to OEM installation only. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
1 2 3 4 | Modular Approval. Power Output listed is Conducted. Approval is limited to OEM installation only. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. This device has been evaluated with most conservative antenna-to-body separation distance of 2.0 cm. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device has been described in this filing. Highest measured SAR value for this composite filing with this most conservative separation distance is 0.05 W/kg in the 2.4 GHz band and 0.33 W/kg in the 5 GHz band. |
1 2 3 4 | Is there an equipment authorization waiver associated with this application? | No |
1 2 3 4 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
app
s
|
Test Firm Name and Contact Information
|
1 2 3 4
|
Firm Name |
Sporton International Inc.
|
1 2 3 4
|
Name |
A**** C****
|
1 2 3 4
|
Telephone Number |
886-3******** Extension:
|
1 2 3 4
|
Fax Number |
886-3********
|
1 2 3 4
|
E-mail |
a******@sporton.com.tw
|
|