app
s
|
Applicant Information
|
|
various
|
Effective |
2013-10-21
|
various
|
2013-10-18
|
various
|
2013-07-24
|
various
|
2013-07-12
|
various
|
Applicant's complete, legal business name |
Qualcomm Atheros, Inc.
|
various
|
FCC Registration Number (FRN) |
0003716743
|
various
|
Physical Address |
1700 Technology Dr
|
various
|
San Jose, California 95110
|
various
|
United States
|
|
app
s
|
TCB Information
|
various
|
TCB Application Email Address |
L******@ul.com
|
various
|
L******@ul.com
|
various
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
various
|
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
|
app
s
|
FCC ID
|
various
|
Grantee Code |
PPD
|
various
|
Equipment Product Code |
QCA6234
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
various
|
Name |
P****** G****
|
various
|
Title |
Vice President, Regulatory Engineering
|
various
|
Telephone Number |
858-6********
|
various
|
Fax Number |
858-6********
|
various
|
E-mail |
p******@qti.qualcomm.com
|
|
app
s
|
Technical Contact
|
various
|
Firm Name |
Sporton International Inc.
|
various
|
Compliance Certification Services
|
various
|
UL VERIFICATION SERVICES INC.
|
various
|
Name |
J****** T****
|
various
|
A****** A******
|
various
|
A****** A********
|
various
|
Physical Address |
No. 52, Hwa Ya 1st Rd., HwaYa Technology Park
|
various
|
47173 Benicia Street
|
various
|
47173 BENICIA ST
|
various
|
Taoyuan Hsien, 333
|
various
|
Fremont, California 94538
|
various
|
FREMONT, California 94538
|
various
|
Taiwan
|
various
|
Telephone Number |
886-3******** Extension:
|
various
|
886-3********
|
various
|
(510)******** Extension:
|
various
|
510.7******** Extension:
|
various
|
510.7********
|
various
|
Fax Number |
886-3********
|
various
|
(510)********
|
various
|
510.6********
|
various
|
E-mail |
E******@Sporton.com.tw,IreneChung@Sporton.com.tw
|
various
|
A******@ul.com
|
|
app
s
|
Non Technical Contact
|
various
|
Firm Name |
Sporton International Inc.
|
various
|
Compliance Certification Services
|
various
|
UL VERIFICATION SERVICES INC.
|
various
|
Name |
J****** T****
|
various
|
A******** A****
|
various
|
A******** A******
|
various
|
Physical Address |
570 St Kilda Road
|
various
|
47173 Benicia Street
|
various
|
47173 BENICIA ST
|
various
|
Taoyuan Hsien, 333
|
various
|
Fremont, California 94538
|
various
|
FREMONT, California 94538
|
various
|
Taiwan
|
various
|
Telephone Number |
886-3********
|
various
|
(510)********
|
various
|
510.7********
|
various
|
Fax Number |
886-3********
|
various
|
(510)********
|
various
|
510.6********
|
various
|
E-mail |
E******@Sporton.com.tw,IreneChung@Sporton.com.tw
|
various
|
A******@ul.com
|
|
app
s
|
Confidentiality (long or short term)
|
various |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
various | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
various | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 01/15/2014 |
various | 01/18/2014 |
various | 01/20/2014 |
various | 01/04/2014 |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
various |
Is this application for software defined/cognitive radio authorization? | No |
various | Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
various | NII - Unlicensed National Information Infrastructure TX |
various | DTS - Digital Transmission System |
various | JBP - Part 15 Class B Computing Device Peripheral |
various | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | 2X2 802.11abgn + BT Module (Sip) |
various | 2x2 802.11a/b/g/n +BT Module(SiP) |
various | 2x2 802.11a/b/g/n +BT Module (SiP) |
various | 2x2 802.11a/b/g/n +BT module Module (SiP) |
various | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
various | Yes |
various | Modular Equipment Type | Single Modular Approval |
various | Does not apply |
various | Purpose / Application is for | Class II permissive change or modification of presently authorized equipment |
various | Original Equipment |
various | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
various | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
various | Grant Comments | Class II Permissive Change to install into specific host Dell Tablet T01D. Output power is conducted. This module may be installed only by the OEM or an OEM integrator. |
various | Class II Permissive Change to install into specific portable host Dell Tablet T01D. This device has 20 and 40 MHz bandwidth modes. This module may only be installed by the OEM or an OEM integrator. In Mobile RF Exposure configurations, this approval is valid when the antenna(s) used for this device in portable configurations is installed in mobile hosts with a minimum antenna to user separation distance of at least 20 cm or in the specific Portable Hosts as documented in this C2PC. Installation in portable host configurations requires additional evaluation and certification. Grantee must provide instructions and coordinate with OEM integrators to determine applicable host configurations to ensure compliance including RF exposure and simultaneous transmission. Operation in 5.15-5.25 GHz and 5.47-5.725 GHz bands is limited to indoor use only. The highest reported SAR value is 1.20 W/kg. |
various | Class II Permissive Change to install into specific host Dell Tablet T01D. Output power is conducted. This device has 20 and 40 MHz bandwidth modes. This module may be installed only by the OEM or an OEM integrator. In Mobile RF Exposure configurations, this approval is valid when the antenna(s) used for this device in portable configurations is installed in mobile hosts with a minimum antenna to user separation distance of at least 20 cm or in the specific Portable Hosts as documented in this C2PC. Installation in portable host configurations requires additional evaluation and certification. Grantee must provide instructions and coordinate with OEM integrators to determine applicable host configurations to ensure compliance including RF exposure and simultaneous transmission. The highest reported SAR value is 1.20 W/kg. |
various | Class II Permissive Change to allow configuration in specific portable tablet host. Output power is conducted. This device has 20 and 40 MHz bandwidth modes. This module may be installed only by the OEM or an OEM integrator. This approval is valid when the antenna(s) used for this device in portable configurations is installed in mobile hosts with a minimum antenna to user separation distance of at least 20 cm. Installation in portable host configurations requires additional evaluation and certification. Grantee must provide instructions and coordinate with OEM integrators to determine applicable host configurations to ensure compliance including RF exposure and simultaneous transmission. The highest reported SAR for stand-alone and simultaneous transmission exposure conditions are 1.18 W/kg and 1.18 W/kg, respectively. |
various | Class II Permissive Change to allow configuration in specific portable tablet host. Output power is conducted. This module may be installed only by the OEM or an OEM integrator. |
various | Class II Permissive Change to allow configuration in specific portable tablet host. Output power is conducted. This device has 20 and 40 MHz bandwidth modes. This module may be installed only by the OEM or an OEM integrator. This approval is valid when the antenna(s) used for this device in portable configurations is installed in mobile hosts with a minimum antenna to user separation distance of at least 20 cm. Installation in portable host configurations requires additional evaluation and certification. Grantee must provide instructions and coordinate with OEM integrators to determine applicable host configurations to ensure compliance including RF exposure and simultaneous transmission. Operation in 5.15-5.25 GHz and 5.47-5.725 GHz bands is limited to indoor use only. The highest reported SAR for stand-alone and simultaneous transmission exposure conditions are 1.09 W/kg and 1.09 W/kg, respectively. |
various | Class II Permissive Change. Output power is conducted. This device has 20 and 40 MHz bandwidth modes. This module may be installed only by the OEM or an OEM integrator. This approval is valid when the antenna(s) used for this device in portable configurations is installed in mobile hosts with a minimum antenna to user separation distance of at least 20 cm. Installation in portable host configurations requires additional evaluation and certification. Grantee must provide instructions and coordinate with OEM integrators to determine applicable host configurations to ensure compliance including RF exposure and simultaneous transmission. |
various | Output power is conducted. This module may be installed only by the OEM or an OEM integrator. |
various | Output power is conducted. This device has 20 and 40 MHz bandwidth modes. This module may be installed only by the OEM or an OEM integrator. This approval is valid when the antenna(s) used for this device in portable configurations is installed in mobile hosts with a minimum antenna to user separation distance of at least 20 cm. Installation in portable host configurations requires additional evaluation and certification. Grantee must provide instructions and coordinate with OEM integrators to determine applicable host configurations to ensure compliance including RF exposure and simultaneous transmission. Operation in 5.15-5.25 GHz and 5.47-5.725 GHz bands is limited to indoor use only. |
various | Output power is conducted. This device has 20 and 40 MHz bandwidth modes. This module may be installed only by the OEM or an OEM integrator. This approval is valid when the antenna(s) used for this device in portable configurations is installed in mobile hosts with a minimum antenna to user separation distance of at least 20 cm. Installation in portable host configurations requires additional evaluation and certification. Grantee must provide instructions and coordinate with OEM integrators to determine applicable host configurations to ensure compliance including RF exposure and simultaneous transmission. |
various | Is there an equipment authorization waiver associated with this application? | No |
various | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
app
s
|
Test Firm Name and Contact Information
|
various
|
Firm Name |
Sporton International Inc.
|
various
|
Sporton International Inc
|
various
|
UL Verification Services Inc. (formerly UL CCS)
|
various
|
Compliance Certification Services
|
various
|
Name |
A******** C******
|
various
|
M******** M******
|
various
|
T******** C********
|
various
|
Telephone Number |
886-3******** Extension:
|
various
|
886-2******** Extension:
|
various
|
919 5********
|
various
|
510-7********
|
various
|
Fax Number |
886-3********
|
various
|
886-2********
|
various
|
000-0********
|
various
|
510-6********
|
various
|
E-mail |
a******@sporton.com.tw
|
various
|
m******@ul.com
|
various
|
t******@ccsemc.com
|
|