app
s
|
Applicant Information
|
|
various
|
Effective |
2016-03-24
|
various
|
2016-03-11
|
various
|
2016-02-19
|
various
|
2015-12-01
|
various
|
2015-08-11
|
various
|
2015-01-08
|
various
|
2014-10-09
|
various
|
2014-09-29
|
various
|
2014-09-03
|
various
|
2014-08-28
|
various
|
2014-06-11
|
various
|
2013-08-20
|
various
|
Applicant's complete, legal business name |
Qualcomm Atheros, Inc.
|
various
|
FCC Registration Number (FRN) |
0003716743
|
various
|
Physical Address |
1700 Technology Dr
|
various
|
San Jose, California 95110
|
various
|
United States
|
|
app
s
|
TCB Information
|
various
|
TCB Application Email Address |
L******@ul.com
|
various
|
L******@ul.com
|
various
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
various
|
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
|
app
s
|
FCC ID
|
various
|
Grantee Code |
PPD
|
various
|
Equipment Product Code |
QCNFA222
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
various
|
Name |
P****** G****
|
various
|
Title |
Vice President, Regulatory Engineering
|
various
|
Telephone Number |
858-6********
|
various
|
Fax Number |
858-6********
|
various
|
E-mail |
p******@qti.qualcomm.com
|
|
app
s
|
Technical Contact
|
various
|
Firm Name |
Bureau Veritas Consumer Products Services (H.K.)
|
various
|
Name |
A**** W********
|
various
|
H******** C****
|
various
|
Physical Address |
No.19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dis
|
various
|
No. 81-1, Lu Liao Keng, 9th Ling, Wu Lung Tsuen
|
various
|
Taoyuan City, 33383
|
various
|
Hsin Chu Hsien
|
various
|
Hsin Chu Hsien, 94538
|
various
|
Taiwan
|
various
|
Telephone Number |
886 (********
|
various
|
886 (******** Extension:
|
various
|
Fax Number |
886 (********
|
various
|
886 (********
|
various
|
E-mail |
a******@tw
|
various
|
h******@tw.bureauveritas.com
|
|
app
s
|
Non Technical Contact
|
various
|
Firm Name |
Bureau Veritas Consumer Products Services (H.K.)
|
various
|
Name |
A****** W****
|
various
|
H**** C********
|
various
|
Physical Address |
No.19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dis
|
various
|
No. 81-1, Lu Liao Keng, 9th Ling, Wu Lung Tsuen
|
various
|
Taoyuan City, 33383
|
various
|
Hsin Chu Hsien
|
various
|
Hsin Chu Hsien, 94538
|
various
|
Taiwan
|
various
|
Telephone Number |
886 (********
|
various
|
Fax Number |
886 (********
|
various
|
886 (********
|
various
|
E-mail |
a******@tw.bureauveritas.com
|
various
|
h******@tw.bureauveritas.com
|
|
app
s
|
Confidentiality (long or short term)
|
various |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
various | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
various | No |
various | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 09/07/2016 |
various | 12/10/2015 |
various | 09/25/2015 |
various | 06/29/2015 |
various | 04/04/2015 |
various | 03/28/2015 |
various | 03/02/2015 |
various | 02/23/2015 |
various | 12/08/2014 |
various | 10/01/2013 |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
various |
Is this application for software defined/cognitive radio authorization? | No |
various | Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
various | DTS - Digital Transmission System |
various | NII - Unlicensed National Information Infrastructure TX |
various | JBP - Part 15 Class B Computing Device Peripheral |
various | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | PCIE 802.11a/b/g/n 2.4GHz/5GHz + USB BT 4.0 card |
various | PCIE 802.11a/b/g/n 2.4GHz/5GHz + USB BT 4.0card |
various | PCIE 802.11a/b/g/n 2.4GHz/5GHz + USB BT 4.0 |
various | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
various | Modular Equipment Type | Does not apply |
various | Single Modular Approval |
various | Purpose / Application is for | Class II permissive change or modification of presently authorized equipment |
various | Original Equipment |
various | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
various | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
various | Grant Comments | Class II Permissive Changes to add the specific portable host (ASUSTeK, Model Name: TP501U, J501U, R518U) with new antenna model. Output power is conducted. This module may be installed only by the OEM or an OEM integrator. |
various | Class II permissive change to add the specific portable host (ASUSTeK, Model Name: TP501U, J501U, R518U) with new antenna model. Output power is conducted. This device has 20 and 40 MHz bandwidth modes. This module may be installed only by the OEM or an OEM integrator. This approval is valid when the antenna used for this device in portable configurations is installed in the display section of Notebook/Netbook/Laptop hosts with a minimum antenna to user separation distance of at least 0.5 cm and antenna to antenna separation distance of 3 cm. Other configurations or co-location with other transmitters requires additional evaluation and certification. Grantee must provide instructions and coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for standalone and simultaneous transmission are 1.13 W/Kg and 1.30 W/kg respectively. |
various | Class II permissive change to add the specific portable host (ASUSTek Model Name: TP301U and Q303U) with new antenna model. Output power is conducted. This device has 20 and 40 MHz bandwidth modes. This module may be installed only by the OEM or an OEM integrator. This approval is valid when the antenna used for this device in portable configurations is installed in the display section of Notebook/Netbook/Laptop hosts with a minimum antenna to user separation distance of at least 0.5 cm and antenna to antenna separation distance of 3 cm. Other configurations or co-location with other transmitters requires additional evaluation and certification. Grantee must provide instructions and coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. SAR requirements according to published KDB 447498. The highest reported SAR values for body-worn and simultaneous transmission are 1.19 W/Kg and 1.37 W/kg respectively. |
various | Class II permissive change. Output power is conducted. This device has 20 and 40 MHz bandwidth modes. This module may be installed only by the OEM or an OEM integrator. This approval is valid when the antenna used for this device in portable configurations is installed in the display section of Notebook/Netbook/Laptop hosts with a minimum antenna to user separation distance of at least 0.8 cm and antenna to antenna separation distance of 3 cm. Other configurations or co-location with other transmitters requires additional evaluation and certification. The 5150-5250 MHz band is for indoor use only. Grantee must provide instructions and coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR values for stand-alone and simultaneous transmission across all filings under this FCC ID are 1.5 W/kg and 1.5 W/Kg respectively. |
various | Output power is conducted. This module may be installed only by the OEM or an
OEM integrator.
Class 2 Permissive Change for the addition of a specific 2.4GHz antenna for use with the module as detailed in this filing.
This approval is valid when the antenna, detailed in this filing, is used with this module in portable configurations is installed with a minimum antenna to user separation distance of 0.5cm. The highest reported SAR values for body and simultaneous transmission are < 0.10 W/Kg and 0.78 W/kg respectively. |
various | Output power is conducted. This device has 20 and 40 MHz bandwidth modes. This module may be installed only by the OEM or an OEM integrator. This approval is valid when the antenna used for this device in portable configurations is installed in the display section of Notebook/Netbook/Laptop hosts with a minimum antenna to user separation distance of at least 0.8 cm and antenna to antenna separation distance of 3 cm. Other configurations or co-location with other transmitters requires additional evaluation and certification. Grantee must provide instructions and coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. SAR requirements according to published KDB 447498. The highest reported SAR values for body-worn and simultaneous transmission are 0.66 W/Kg and 0.76 W/kg respectively.
Class 2 Permissive Change to disable the 5GHz band and the addition of a specific 2.4GHz antenna for use with the module as detailed in this filing.
This approval is valid when the antenna, detailed in this filing, is used with this module in portable configurations is installed with a minimum antenna to user separation distance of 0.5cm. The highest reported SAR values for body and simultaneous transmission are 0.78 W/Kg and 0.78 W/kg respectively. |
various | Output power is conducted. This device has 20 and 40 MHz bandwidth modes.
This module may be installed only by the OEM or an OEM integrator. This approval is valid when the antenna used for this device in portable configurations is installed in the display section of Notebook/Netbook/Laptop hosts with a minimum antenna to user separation distance of at least 0.8 cm and antenna to antenna separation distance of 3 cm. Other configurations or co-location with other transmitters requires additional evaluation and certification. The 5150-5250 MHz band is for indoor use only. Grantee must provide instructions and coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. SAR requirements according to published KDB 447498. The highest reported SAR values for body-worn and simultaneous transmission are 0.40 W/Kg and 0.50 W/kg respectively.
Class 2 Permissive Change to disable the 5GHz band as detailed in this filing. |
various | Class II permissive change to add the specific portable host Acer MS2398 with antenna described in this filing. Output power is conducted. This device has 20 and 40 MHz bandwidth modes. This module may be installed only by the OEM or an OEM integrator. This approval is valid when the antenna used for this device in portable configurations is installed in the display section of Notebook/Netbook/Laptop hosts with a minimum antenna to user separation distance of at least 0.8 cm and antenna to antenna separation distance of 3 cm. Other configurations or co-location with other transmitters requires additional evaluation and certification. Grantee must provide instructions and coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR values for body-worn and simultaneous transmission are 0.81 W/Kg and 1.59 W/kg respectively. The highest reported SAR values for body-worn and simultaneous transmission across all filings under this FCC ID are 1.50 W/kg and 1.59 W/Kg respectively. |
various | Class II permissive change to add the specific portable host Acer MS2398 with antenna described in this filing. Output power is conducted. This module may be installed only by the OEM or an OEM integrator. The highest reported SAR values for stand-alone and simultaneous transmission are <0.1 W/Kg and 1.59 W/kg respectively. The highest reported SAR values for stand-alone and simultaneous transmission across all filings under this FCC ID are <0.1 W/kg and 1.59 W/Kg respectively. |
various | Class II permissive change to add the specific portable host Acer MS2398 with antenna described in this filing. Output power is conducted. This device has 20 and 40 MHz bandwidth modes. This module may be installed only by the OEM or an OEM integrator. This approval is valid when the antenna used for this device in portable configurations is installed in the display section of Notebook/Netbook/Laptop hosts with a minimum antenna to user separation distance of at least 0.8 cm and antenna to antenna separation distance of 3 cm. Other configurations or co-location with other transmitters requires additional evaluation and certification. The 5150-5250 MHz band is for indoor use only. Grantee must provide instructions and coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR values for body-worn and simultaneous transmission are 0.70 W/Kg and 1.15 W/kg respectively. The highest reported SAR values for body-worn and simultaneous transmission across all filings under this FCC ID are 1.26 W/kg and 1.15 W/Kg respectively. |
various | Class II permissive change to add the specific portable host Acer ZS8 with antenna described in this filing. Output power is conducted. This module may be installed only by the OEM or an OEM integrator. |
various | Class II permissive change to add the specific portable host Acer ZS8 with antenna described in this filing. Output power is conducted. This device has 20 and 40 MHz bandwidth modes. This module may be installed only by the OEM or an OEM integrator. This approval is valid when the antenna used for this device in portable configurations is installed in the display section of Notebook/Netbook/Laptop hosts with a minimum antenna to user separation distance of at least 0.8 cm and antenna to antenna separation distance of 3 cm. Other configurations or co-location with other transmitters requires additional evaluation and certification. Grantee must provide instructions and coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. SAR requirements according to published KDB 447498. The highest reported SAR values for body-worn and simultaneous transmission are 0.89 W/Kg and 1.47 W/kg respectively. The highest reported SAR across all filings under this FCC ID is 1.50 W/kg |
various | Class II permissive change to add the specific portable host Acer ZS8 with antenna described in this filing. Output power is conducted. This device has 20 and 40 MHz bandwidth modes. This module may be installed only by the OEM or an OEM integrator. This approval is valid when the antenna used for this device in portable configurations is installed in the display section of Notebook/Netbook/Laptop hosts with a minimum antenna to user separation distance of at least 0.8 cm and antenna to antenna separation distance of 3 cm. Other configurations or co-location with other transmitters requires additional evaluation and certification. The 5150-5250 MHz band is for indoor use only. Grantee must provide instructions and coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. SAR requirements according to published KDB 447498. The highest reported SAR values for body-worn and simultaneous transmission are 0.76 W/Kg and 1.15 W/kg respectively. The highest reported SAR across all filings under this FCC ID is 1.5 W/kg |
various | Class II permissive change to add the specific portable host (Acer SW5-171, SW5-171P) with
antenna described in this filing.
Output power is conducted. This module may be installed only by the OEM or an OEM integrator. |
various | Class II permissive change to add the specific portable host (Acer SW5-171, SW5-171P) with
antenna described in this filing.
Output power is conducted. This device has 20
and 40 MHz bandwidth modes. This module may be installed only by the OEM or
an OEM integrator. Also, this approval is valid when the antenna used for this
device in portable configurations is installed in the display section of
Notebook/Netbook/Laptop hosts with a minimum antenna to user separation
distance of at least 0.8 cm and antenna to antenna separation distance of 3 cm.
Other configurations or colocation with other transmitters requires additional
evaluation and certification. Grantee must provide instructions and coordinate with
OEM integrators to determine applicable host configurations to ensure RF
exposure compliance, including simultaneous transmission. SAR requirements
according to published KDB 447498.
The highest reported SAR value across all filings under this FCC ID is 1.50 W/kg.
The highest reported SAR for the device in this C2PC filing is 1.50 W/kg. |
various | Class II permissive change to add the specific portable host (Acer SW5-171, SW5-171P) with
antenna described in this filing.
Output power is conducted. This device has 20
and 40 MHz bandwidth modes. This module may be installed only by the OEM or
an OEM integrator. Also, this approval is valid when the antenna used for this
device in portable configurations is installed in the display section of
Notebook/Netbook/Laptop hosts with a minimum antenna to user separation
distance of at least 0.8 cm and antenna to antenna separation distance of 3 cm.
Other configurations or colocation with other transmitters requires additional
evaluation and certification. The 5150-5250 MHz band is for indoor use only.
Grantee must provide instructions and coordinate with OEM integrators to
determine applicable host configurations to ensure RF exposure compliance,
including simultaneous transmission. SAR requirements according to published
KDB 447498.
The highest reported SAR across all filings under this FCC ID is 1.26 W/kg.
The highest reported SAR value for the device in this C2PC filing is 1.26 W/Kg. |
various | Class II permissive change to add the specific portable host (Acer MS2395) with antenna described in this filing. Output power is conducted. This module may be installed only by the OEM or an OEM integrator. |
various | Class II permissive change to add the specific portable host (Acer MS2395) with antenna described in this filing. Output power is conducted. This device has 20 and 40 MHz bandwidth modes. This module may be installed only by the OEM or an OEM integrator.
Also, this approval is valid when the antenna used for this device in portable configurations is installed in the display section of Notebook/Netbook/Laptop hosts with a minimum antenna to user separation distance of at least 0.8 cm and antenna to antenna separation distance of 3 cm. Other configurations or colocation with other transmitters requires additional evaluation and certification. The 5150-5250 MHz band is for indoor use only. Grantee must provide instructions and coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. SAR requirements according to published KDB 447498. The highest reported SAR across all filings under this FCC ID is 0.56 W/kg. The highest reported SAR value for the device in this C2PC filing is 0.21W/Kg. |
various | Class II permissive change to add the specific portable host (Acer MS2395) with antenna described in this filing. Output power is conducted. This device has 20 and 40 MHz bandwidth modes. This module may be installed only by the OEM or an OEM integrator.
Also, this approval is valid when the antenna used for this device in portable configurations is installed in the display section of Notebook/Netbook/Laptop hosts with a minimum antenna to user separation distance of at least 0.8 cm and antenna to antenna separation distance of 3 cm. Other configurations or colocation with other transmitters requires additional evaluation and certification. Grantee must provide instructions and coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. SAR requirements according to published KDB 447498. The highest reported SAR value across all filings under this FCC ID is 0.76 W/kg. The highest reported SAR for the device in this C2PC filing is 0.33 W/kg. |
various | Class II permissive change to add the specific portable host (Acer MS2391)with antenna described in this filing. Output power is conducted. This device has 20 and 40 MHz bandwidth modes. This module may be installed only by the OEM or an OEM integrator. This approval is valid when the antenna used for this device in portable configurations is installed in the display section of Notebook/Netbook/Laptop hosts with a minimum antenna to user separation distance of at least 0.8 cm and antenna to antenna separation distance of 3 cm. Other configurations or colocation with other transmitters requires additional evaluation and certification. The 5150-5250 MHz band is for indoor use only. Grantee must provide instructions and coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. SAR requirements according to published KDB 447498. The highest reported SAR values for body-worn and simultaneous transmission are 0.40 W/Kg and 0.50 W/kg respectively. The highest reported SAR value across all filings under this FCC ID is 0.77W/Kg. |
various | Class II permissive change to add the specific portable host (Acer MS2391)with antenna described in this filing. Output power is conducted. This device has 20 and 40 MHz bandwidth modes. This module may be installed only by the OEM or an OEM integrator. This approval is valid when the antenna used for this device in portable configurations is installed in the display section of Notebook/Netbook/Laptop hosts with a minimum antenna to user separation distance of at least 0.8 cm and antenna to antenna separation distance of 3 cm. Other configurations or colocation with other transmitters requires additional evaluation and certification. Grantee must provide instructions and coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. SAR requirements according to published KDB 447498. The highest reported SAR values for body worn and simultaneous transmission are 0.66 W/Kg and 0.76 W/kg respectively. The highest reported SAR value across all filings under this FCC ID is 0.68 W/Kg. |
various | Class II permissive change to add the specific portable host (Acer MS2391) and antenna with power reduction as described in this filing. Output power is conducted. This module may be installed only by the OEM or an OEM integrator. |
various | Class II permissive change to add the specific portable host (Acer MS2392)with antenna described in this filing.
Output power is conducted. This device has 20 and 40 MHz bandwidth modes. This module may be installed only by the OEM or an OEM integrator. This approval is valid when the antenna used for this device in portable configurations is installed in the display section of Notebook/Netbook/Laptop hosts with a minimum antenna to user separation distance of at least 0.8 cm and antenna to antenna separation distance of 3 cm. Other configurations or colocation with other transmitters requires additional evaluation and certification. Grantee must provide instructions and coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. SAR requirements according to published KDB 447498. The highest reported SAR values for body worn and simultaneous transmission are 0.66 W/Kg and 0.76 W/kg respectively.
The highest reported SAR for the device is 0.64 W/kg.The highest reported SAR value across all filings under this FCC ID is 0.66 W/Kg. |
various | Class II permissive change to add the specific portable host (Acer MS2392)with antenna described in this filing.
Output power is conducted. This device has 20 and 40 MHz bandwidth modes. This module may be installed only by the OEM or an OEM integrator. This approval is valid when the antenna used for this device in portable configurations is installed in the display section of Notebook/Netbook/Laptop hosts with a minimum antenna to user separation distance of at least 0.8 cm and antenna to antenna separation distance of 3 cm. Other configurations or colocation with other transmitters requires additional evaluation and certification. The 5150-5250 MHz band is for indoor use only. Grantee must provide instructions and coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. SAR requirements according to published KDB 447498. The highest reported SAR values for body-worn and simultaneous transmission are 0.40 W/Kg and 0.50 W/kg respectively.
The highest reported SAR for the device is 0.56W/kg. The highest reported SAR value across all filings under this FCC ID is 0.56W/Kg. |
various | Class II permissive change to add the specific portable host (Acer MS2392)with antenna described in this filing.
Output power is conducted. This module may be installed only by the OEM or an OEM integrator. |
various | Output power is conducted. This device has 20 and 40 MHz bandwidth modes. This module may be installed only by the OEM or an OEM integrator. This approval is valid when the antenna used for this device in portable configurations is installed in the display section of Notebook/Netbook/Laptop hosts with a minimum antenna to user separation distance of at least 0.8 cm and antenna to antenna separation distance of 3 cm. Other configurations or co-location with other transmitters requires additional evaluation and certification. Grantee must provide instructions and coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. SAR requirements according to published KDB 447498. The highest reported SAR values for body-worn and simultaneous transmission are 0.66 W/Kg and 0.76 W/kg respectively. |
various | Output power is conducted. This device has 20 and 40 MHz bandwidth modes. This module may be installed only by the OEM or an OEM integrator. This approval is valid when the antenna used for this device in portable configurations is installed in the display section of Notebook/Netbook/Laptop hosts with a minimum antenna to user separation distance of at least 0.8 cm and antenna to antenna separation distance of 3 cm. Other configurations or co-location with other transmitters requires additional evaluation and certification. The 5150-5250 MHz band is for indoor use only. Grantee must provide instructions and coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. SAR requirements according to published KDB 447498. The highest reported SAR values for body-worn and simultaneous transmission are 0.40 W/Kg and 0.50 W/kg respectively. |
various | Output power is conducted. This module may be installed only by the OEM or an OEM integrator. |
various | Is there an equipment authorization waiver associated with this application? | No |
various | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
app
s
|
Test Firm Name and Contact Information
|
various
|
Firm Name |
DEKRA TESTING AND CERTIFICATION CO., LTD.
|
various
|
DEKRA Testing and Certification Co., Ltd.
|
various
|
DEKRA TESTING AND CERTIFICATION CO., LTD. LinKou
|
various
|
Bureau Veritas CPS (H.K.) Ltd. Taoyuan Branch
|
various
|
SGS TAIWAN LTD.
|
various
|
SGS Taiwan Ltd.
|
various
|
Bureau Veritas CPS (H.K.) Ltd., Taoyuan Branch
|
various
|
Name |
W******** L****
|
various
|
S**** H********
|
various
|
R******** C****
|
various
|
N****** B******
|
various
|
J******** L****
|
various
|
Telephone Number |
886-3******** Extension:
|
various
|
886-2******** Extension:
|
various
|
+886-******** Extension:
|
various
|
886-3******** Extension:
|
various
|
886-2******** Extension:
|
various
|
886-2******** Extension:
|
various
|
88633******** Extension:
|
various
|
+886-******** Extension:
|
various
|
Fax Number |
886-3********
|
various
|
886-2********
|
various
|
+886-********
|
various
|
886-3********
|
various
|
886 3********
|
various
|
886-2********
|
various
|
886 2********
|
various
|
88632********
|
various
|
+886-********
|
various
|
E-mail |
w******@dekra.com
|
various
|
s******@quietek.com
|
various
|
s******@dekra.com
|
various
|
r******@tw.bureauveritas.com
|
various
|
n******@sgs.com
|
various
|
j******@sgs.com
|
|