app
s
|
Applicant Information
|
|
various
|
Effective |
2016-04-01
|
various
|
2015-09-16
|
various
|
2015-09-15
|
various
|
2015-09-02
|
various
|
2015-06-14
|
various
|
2015-06-09
|
various
|
2015-04-23
|
various
|
2015-03-18
|
various
|
2015-03-17
|
various
|
2015-03-10
|
various
|
2015-02-18
|
various
|
2014-12-17
|
various
|
2014-12-16
|
various
|
2014-12-10
|
various
|
2014-11-03
|
various
|
2014-11-02
|
various
|
2014-10-07
|
various
|
2014-07-17
|
various
|
2014-06-06
|
various
|
2014-06-05
|
various
|
Applicant's complete, legal business name |
Qualcomm Atheros, Inc.
|
various
|
FCC Registration Number (FRN) |
0003716743
|
various
|
Physical Address |
1700 Technology Dr
|
various
|
San Jose, California 95110
|
various
|
United States
|
|
app
s
|
TCB Information
|
various
|
TCB Application Email Address |
L******@ul.com
|
various
|
L******@ul.com
|
various
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
various
|
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
|
app
s
|
FCC ID
|
various
|
Grantee Code |
PPD
|
various
|
Equipment Product Code |
QCNFA34AC
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
various
|
Name |
P**** G****
|
various
|
Title |
Vice President, Regulatory Engineering
|
various
|
Telephone Number |
858-6********
|
various
|
Fax Number |
858-6********
|
various
|
E-mail |
p******@qti.qualcomm.com
|
|
app
s
|
Technical Contact
|
various
|
Firm Name |
Sporton International Inc.
|
various
|
Compliance Certification Services Inc.
|
various
|
Bureau Veritas Consumer Products Services (H.K.)
|
various
|
Name |
J******** T******
|
various
|
K******** C****
|
various
|
A****** W********
|
various
|
Physical Address |
No.52, HwaYa 1st Rd., Kwei-Shan Hsiang
|
various
|
No.11, Wugong 6th Rd., Wugu Dist.
|
various
|
No. 81-1, Lu Liao Keng, 9th Ling, Wu Lung Tsuen
|
various
|
Taoyuan City, 333
|
various
|
New Taipei City, 24891
|
various
|
Hsin Chu Hsien, 94538
|
various
|
Hsin Chu Hsien
|
various
|
Hsin Chu Hsien, 467-811
|
various
|
Taiwan
|
various
|
Telephone Number |
886-3********
|
various
|
886-2********
|
various
|
886 (********
|
various
|
Fax Number |
886-3********
|
various
|
886-2********
|
various
|
886 (********
|
various
|
E-mail |
E******@sporton.com.tw;Irenechung@sporton.com.tw
|
various
|
a******@ccsrf.com
|
various
|
a******@tw.bureauveritas.com
|
|
app
s
|
Non Technical Contact
|
various
|
Firm Name |
Sporton International Inc.
|
various
|
Compliance Certification Services Inc.
|
various
|
Bureau Veritas Consumer Products Services (H.K.)
|
various
|
Name |
J****** T******
|
various
|
K******** C******
|
various
|
A****** W****
|
various
|
Physical Address |
No.52, HwaYa 1st Rd., Kwei-Shan Hsiang
|
various
|
No.11, Wugong 6th Rd., Wugu Dist.
|
various
|
No. 81-1, Lu Liao Keng, 9th Ling, Wu Lung Tsuen
|
various
|
Taoyuan City, 94538
|
various
|
Taoyuan City
|
various
|
New Taipei City, 24891
|
various
|
Hsin Chu Hsien, 94538
|
various
|
Hsin Chu Hsien
|
various
|
Hsin Chu Hsien, 467-811
|
various
|
Taiwan
|
various
|
Telephone Number |
886-3********
|
various
|
886-2********
|
various
|
+886 ********
|
various
|
886 (********
|
various
|
Fax Number |
886-3********
|
various
|
886-2********
|
various
|
886 (********
|
various
|
E-mail |
E******@sporton.com.tw;Irenechung@sporton.com.tw
|
various
|
a******@ccsrf.com
|
various
|
a******@tw.bureauveritas.com
|
|
app
s
|
Confidentiality (long or short term)
|
various |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
various | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
various | No |
various | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 09/28/2016 |
various | 03/06/2016 |
various | 10/17/2015 |
various | 12/11/2015 |
various | 12/06/2015 |
various | 10/20/2015 |
various | 09/13/2015 |
various | 09/12/2015 |
various | 09/06/2015 |
various | 04/04/2015 |
various | 06/14/2015 |
various | 01/30/2015 |
various | 05/02/2015 |
various | 05/01/2015 |
various | 07/31/2014 |
various | 06/30/2014 |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
various |
Is this application for software defined/cognitive radio authorization? | No |
various | Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
various | NII - Unlicensed National Information Infrastructure TX |
various | DTS - Digital Transmission System |
various | JBP - Part 15 Class B Computing Device Peripheral |
various | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | 802.11 a/b/g/n/ac+ BT 4.1 M.2 Type Card |
various | 802.11a/b/g/n/ac+ BT 4.1 M.2 Type Card |
various | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
various | Modular Equipment Type | Single Modular Approval |
various | Does not apply |
various | Purpose / Application is for | Class II permissive change or modification of presently authorized equipment |
various | Original Equipment |
various | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
various | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
various | Grant Comments | Class II permissive change to add portable use condition and antenna in specific host laptop platform (model TP00080A) as described in this filing. Output power is conducted. This module may only be installed by the OEM or an OEM integrator. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. |
various | Class II permissive change to add portable use condition and antenna in specific host laptop platform (model TP00080A) as described in this filing.
Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may only be installed by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Prior Class II Permissive Change allowed for installation in portable hosts, limited to the display section of laptop/notebook/netbook hosts with a minimum 1.5 cm antenna to user separation and 3cm antenna-to-antenna separation. The highest reported SAR values in this filing is 0.21 W/kg. The highest reported SAR values across all filings under this FCC ID for stand-alone and simultaneous transmission exposure conditions are 1.19 W/Kg and 1.58 W/Kg respectively. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. |
various | Class II permissive change to add portable use condition and antenna in specific host laptop platform (model TP00080A) as described in this filing.
Output power listed is maximum combined conducted. This device supports 20 and 40MHz bandwidths for 2.4 GHz and 20, 40, and 80 MHz bandwidths for 5.7 GHz. This module may only be installed by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Prior Class II Permissive Change allowed for installation in portable hosts, limited to the display section of laptop/notebook/netbook hosts with a minimum 1.5 cm antenna to user separation and 3cm antenna-to-antenna separation. The highest reported SAR values in this filing is 0.22 W/kg. The highest reported SAR values across all filings under this FCC ID for stand-alone and simultaneous transmission exposure conditions are 1.37 W/Kg and 1.55 W/Kg respectively. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. |
various | Class II permissive change to add portable use condition and antenna in specific Lenovo host laptop (TP00067C) described in this filing. Output power is conducted. Prior Class II Permissive Change allowed for installation in portable hosts, limited to the display section of laptop/notebook/netbook hosts with a minimum 1.5 cm antenna to user separation and 3cm antenna-to-antenna separation. This module may be installed only by the OEM or an OEM integrator. The highest reported SAR values across all filings under this FCCID for stand-alone and simultaneous transmission exposure conditions are <0.1 W/Kg and 1.58 W/Kg respectively. |
various | Class II permissive change to add portable use condition and antenna in specific Lenovo host laptop (TP00067C) described in this filing. Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Prior Class II Permissive Change allowed for installation in portable hosts, limited to the display section of laptop/notebook/netbook hosts with a minimum 1.5 cm antenna to user separation and 3cm antenna-to-antenna separation. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR values for stand-alone and simultaneous transmission exposure conditions are 0.83 W/Kg and 0.83 W/Kg respectively. The highest reported SAR values across all filings under this FCCID for stand-alone and simultaneous transmission are 1.37 W/Kg and 1.58 W/Kg respectively. |
various | Class II permissive change to add portable use condition and antenna in specific Lenovo host laptop (TP00067C) described in this filing. Output power listed is maximum combined conducted. Output power listed is maximum combined conducted. This device supports 20 and 40MHz bandwidths for 2.4 GHz and 20, 40, and 80 MHz bandwidths for 5.7 GHz. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Prior Class II Permissive Change allowed for installation in portable hosts, limited to the display section of laptop/notebook/netbook hosts with a minimum 1.5 cm antenna to user separation and 3cm antenna-to-antenna separation. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR values in this filing for this configuration for stand-alone and simultaneous exposure conditions are 1.15 W/kg and 1.15 W/Kg respectively. The highest reported SAR values across all filings under this FCC ID for stand-alone and simultaneous transmission exposure conditions are 1.37 W/Kg and 1.55 W/Kg respectively. |
various | Class II Permissive Change to show compliance with New U-NII-3 rule per FCC ET docket No. 13-49.
Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Prior Class II Permissive Change allowed for installation in portable hosts, limited to the display section of laptop/notebook/netbook hosts with a minimum 1.5 cm antenna to user separation and 3cm antenna-to-antenna separation. The highest reported SAR values in this filing, and across all filings under this FCC ID, for this configuration for stand-alone and simultaneous exposure conditions are 0.43 W/kg and 0.86 W/Kg respectively. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. |
various | Class II permissive change to add portable use condition and antenna in specific host laptop platform (Lenovo/Flex 3-1570) as described in this filing.
Output power listed is maximum combined conducted. This device supports 20,
40, and 80 MHz bandwidths. This module may be installed only by the OEM or an
OEM integrator. This transmitter has been approved for use in mobile RF
exposure category configurations with the antenna(s) installed to provide a
separation distance of at least 20 cm from all persons. The antenna(s) used for
this transmitter must not be collocated or operating in conjunction with any other
antenna or transmitter within a host device, except in accordance with FCC multitransmitter
product procedures. The 5150-5250 MHz band is for indoor use only.
Grantee must coordinate with OEM integrators to determine applicable host
configurations to ensure RF exposure compliance, including simultaneous
transmission.
The highest reported SAR values for body-worn and simultaneous transmission exposure
conditions are 1.19 W/Kg and 1.58 W/Kg respectively. |
various | Class II permissive change to add portable use condition and antenna in specific host laptop platform (Lenovo/Flex 3-1570) as described in this filing.
Output power listed is maximum combined conducted. This device supports 20
and 40MHz bandwidths for 2.4 Ghz and 20, 40, and 80 MHz bandwidths for 5.7
GHz. This module may be installed only by the OEM or an OEM integrator. This
transmitter has been approved for use in mobile RF exposure category
configurations with the antenna(s) installed to provide a separation distance of at
least 20 cm from all persons. The antenna(s) used for this transmitter must not be
collocated or operating in conjunction with any other antenna or transmitter within
a host device, except in accordance with FCC multi-transmitter product
procedures. Grantee must coordinate with OEM integrators to determine
applicable host configurations to ensure RF exposure compliance, including
simultaneous transmission.
The highest reported SAR values for body-worn and simultaneous transmission exposure
conditions are 0.69 W/Kg and 1.05 W/Kg respectively. |
various | Class II permissive change to add portable use condition and antenna in specific host laptop platform (Lenovo/Flex 3-1570) as described in this filing.
Output power is conducted. This module may be installed only by the OEM or an OEM integrator.
The highest reported SAR values for body-worn and simultaneous transmission exposure
conditions are <0.1 W/Kg and 1.58 W/Kg respectively. |
various | Class II permissive change to add portable use condition and antenna in specific host laptop platform
(Lenovo/FLEX 3-1470) as described in this filing.
Output power listed is maximum combined conducted. This device supports 20,
40, and 80 MHz bandwidths. This module may be installed only by the OEM or an
OEM integrator. This transmitter has been approved for use in mobile RF
exposure category configurations with the antenna(s) installed to provide a
separation distance of at least 20 cm from all persons. The antenna(s) used for
this transmitter must not be collocated or operating in conjunction with any other
antenna or transmitter within a host device, except in accordance with FCC multitransmitter
product procedures. The 5150-5250 MHz band is for indoor use only.
Grantee must coordinate with OEM integrators to determine applicable host
configurations to ensure RF exposure compliance, including simultaneous
transmission.
The highest reported SAR values for body-worn and simultaneous transmission exposure
conditions are 1.33 W/Kg and 1.55 W/Kg respectively. |
various | Class II permissive change to add portable use condition and antenna in specific host laptop platform
(Lenovo/FLEX 3-1470) as described in this filing.
Output power listed is maximum combined conducted. This device supports 20
and 40MHz bandwidths for 2.4 Ghz and 20, 40, and 80 MHz bandwidths for 5.7
GHz. This module may be installed only by the OEM or an OEM integrator. This
transmitter has been approved for use in mobile RF exposure category
configurations with the antenna(s) installed to provide a separation distance of at
least 20 cm from all persons. The antenna(s) used for this transmitter must not be
collocated or operating in conjunction with any other antenna or transmitter within
a host device, except in accordance with FCC multi-transmitter product
procedures. Grantee must coordinate with OEM integrators to determine
applicable host configurations to ensure RF exposure compliance, including
simultaneous transmission.
The highest reported SAR values for body-worn and simultaneous transmission exposure
conditions are 0.80 W/Kg and 1.30 W/Kg respectively. |
various | Class II permissive change to add portable use condition and antenna in specific host laptop platform (Lenovo/FLEX 3-1470) as described in this filing.
Output power is conducted. This module may be installed only by the OEM or an OEM integrator.
The highest reported SAR values for body-worn and simultaneous transmission exposure conditions are <0.1 W/Kg and 1.55 W/Kg respectively. |
various | Class II Permissive Change to add portable use condition and antenna in specific host laptop platforms (Lenovo U31-70 and Lenovo ideapad 500S-13ISK), with power reduction for some modes as described in this filing. Output power listed is maximum combined conducted. This device supports 20 and 40MHz bandwidths for 2.4 GHz and 20, 40, and 80 MHz bandwidths for 5.7 GHz. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR values in this filing in this filing for body-worn and simultaneous transmission exposure conditions are 1.36 W/Kg and 1.41 W/Kg respectively. The highest reported SAR values across all filings under this FCC ID for body-worn and simultaneous transmission exposure conditions are 1.37 W/Kg and 1.55 W/Kg respectively. |
various | Class II Permissive Change to add portable use condition and antenna in specific host laptop platforms (Lenovo U31-70 and Lenovo ideapad 500S-13ISK), with power reduction for some modes as described in this filing. Output power listed is conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR values in this filing in this filing for body-worn and simultaneous transmission exposure conditions are <0.1 W/Kg and 1.41 W/Kg respectively. The highest reported SAR values across all filings under this FCCID for body-worn and simultaneous transmission exposure conditions are <0.10 W/Kg and 1.53 W/Kg respectively. |
various | Class II Permissive Change to add portable use condition and antenna in specific host laptop platforms (Lenovo U31-70 and Lenovo ideapad 500S-13ISK), with power reduction for some modes as described in this filing. Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR values in this filing for body-worn and simultaneous transmission exposure conditions are 1.08 W/Kg and 1.23W/Kg respectively. The highest reported SAR values across all filings under this FCCID for body-worn and simultaneous transmission are 1.37 W/Kg and 1.53 W/Kg respectively. |
various | Class II Permissive Change to add portable use condition and antenna in specific host laptop platform (Lenovo Flex 3-1470), with power reduction for some modes as described in this filing. Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR values in this filing for body-worn and simultaneous transmission exposure conditions are 1.34 W/Kg and 1.49 W/Kg respectively. The highest reported SAR values across all filings under this FCCID for body-worn and simultaneous transmission are 1.37 W/Kg and 1.53 W/Kg respectively. |
various | Class II Permissive Change to add portable use condition and antenna in specific host laptop platform (Lenovo Flex 3-1470), with power reduction for some modes as described in this filing. Output power listed is conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR values across all filings under this FCCID for body-worn and simultaneous transmission exposure conditions are <0.10 W/Kg and 1.53 W/Kg respectively. |
various | Class II Permissive Change to add portable use condition and antenna in specific host laptop platform (Lenovo Flex 3-1470), with power reduction for some modes as described in this filing. Output power listed is maximum combined conducted. This device supports 20 and 40MHz bandwidths for 2.4 GHz and 20, 40, and 80 MHz bandwidths for 5.7 GHz. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR values in this filing in this filing for body-worn and simultaneous transmission exposure conditions are 0.46 W/Kg and 0.90 W/Kg respectively. The highest reported SAR values across all filings under this FCC ID for body-worn and simultaneous transmission exposure conditions are 1.37 W/Kg and 1.55 W/Kg respectively. |
various | Class II Permissive Change to add portable use condition and antenna in specific host laptop platform (Lenovo Flex 3-1570), with power reduction for some modes as described in this filing. Output power listed is maximum combined conducted. This device supports 20 and 40MHz bandwidths for 2.4 GHz and 20, 40, and 80 MHz bandwidths for 5.7 GHz. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR values in this filing in this filing for body-worn and simultaneous transmission exposure conditions are 0.72 W/Kg and 0.90 W/Kg respectively. The highest reported SAR values across all filings under this FCC ID for body-worn and simultaneous transmission exposure conditions are 1.37 W/Kg and 1.55 W/Kg respectively. |
various | Class II Permissive Change to add portable use condition and antenna in specific host laptop platform (Lenovo Flex 3-1570), with power reduction for some modes as described in this filing. Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR values in this filing for body-worn and simultaneous transmission exposure conditions are 1.29 W/Kg and 1.53 W/Kg respectively. The highest reported SAR values across all filings under this FCCID for body-worn and simultaneous transmission are 1.37 W/Kg and 1.53 W/Kg respectively. |
various | Class II Permissive Change to add portable use condition and antenna in specific host laptop platform (Lenovo Flex 3-1570), with power reduction for some modes as described in this filing. Output power listed is conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR values in this filing for body-worn and simultaneous transmission exposure conditions are < 0.10 W/Kg and 1.53 W/Kg respectively. The highest reported SAR values in this filing and across all filings under this FCCID for body-worn and simultaneous transmission exposure conditions are <0.10 W/Kg and 1.53 W/Kg respectively. |
various | Class II permissive change to add portable use condition and antenna in specific host laptop platform (Lenovo S41-70) as described in this filing. Output power listed is maximum combined conducted. This device supports 20 and 40MHz bandwidths for 2.4 Ghz and 20, 40, and 80 MHz bandwidths for 5.7 GHz. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR value in this filing in this filing for body-worn exposure condition is 0.55 W/Kg. The highest reported SAR values across all filings under this FCC ID for body-worn and simultaneous transmission exposure conditions are 1.37 W/Kg and 1.55 W/Kg respectively. |
various | Class II permissive change to add portable use condition and antenna in specific host laptop platform (Lenovo S41-70) as described in this filing. Output power listed is conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR values across all filings under this FCCID for body-worn and simultaneous transmission exposure conditions are <0.1 W/Kg and 1.47 W/Kg respectively. |
various | Class II permissive change to add portable use condition and antenna in specific host laptop platform (Lenovo S41-70) as described in this filing. Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. The 5150-5250 MHz band is for indoor use only. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR value in this filing for body-worn exposure condition is 0.82 W/Kg. The highest reported SAR values across all filings under this FCCID for body-worn and simultaneous transmission are 1.37 W/Kg and 1.47 W/Kg respectively. |
various | Class II permissive change to add portable use condition and antenna in specific host laptop platform (Lenovo Yoga 3 14), with power reduction for some modes as described in this filing. Output power listed is maximum combined conducted. This device supports 20 and 40MHz bandwidths for 2.4 GHz and 20, 40, and 80 MHz bandwidths for 5.7 GHz. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR values in this filing in this filing for body-worn and simultaneous transmission exposure conditions are 1.18 W/Kg and 1.28 W/Kg respectively. The highest reported SAR values across all filings under this FCC ID for body-worn and simultaneous transmission exposure conditions are 1.37 W/Kg and 1.55 W/Kg respectively. |
various | Class II permissive change to add portable use condition and antenna in specific host laptop platform (Lenovo Yoga 3 14) as described in this filing. Output power listed is conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR values in this filing for body-worn and simultaneous transmission exposure conditions are < 0.1 W/Kg and 1.47 W/Kg respectively. The highest reported SAR values in this filing and across all filings under this FCCID for body-worn and simultaneous transmission exposure conditions are <0.1 W/Kg and 1.47 W/Kg respectively. |
various | Class II permissive change to add portable use condition and antenna in specific host laptop platform (Lenovo Yoga 3 14), with power reduction for some modes as described in this filing. Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR values in this filing for body-worn and simultaneous transmission exposure conditions are 1.37 W/Kg and 1.47 W/Kg respectively. The highest reported SAR values across all filings under this FCCID for body-worn and simultaneous transmission are 1.37 W/Kg and 1.47 W/Kg respectively. |
various | Class II permissive change to add portable use condition and antenna in specific host laptop platform (Lenovo Edge 15) as described in this filing.
Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. The 5150-5250 MHz band is for indoor use only. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
The highest reported SAR values in this filing for body-worn and simultaneous transmission exposure conditions are 1.09 W/Kg and 1.15 W/Kg respectively. The highest reported SAR values across all filings under this FCCID for body-worn and simultaneous transmission are 1.29 and 1.29 w/kg respectively. |
various | Class II permissive change to add portable use condition and antenna in specific host laptop platform (Lenovo Edge 15) as described in this filing.
Output power listed is conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
The highest reported SAR values in this filing and across all filings under this FCCID for body-worn and simultaneous transmission exposure conditions are <0.1 W/Kg and 1.30 W/Kg respectively. |
various | Class II permissive change to add portable use condition and antenna in specific host laptop platform (Lenovo Edge 15) as described in this filing.
Output power listed is maximum combined conducted. This device supports 20 and 40MHz bandwidths for 2.4 Ghz and 20, 40, and 80 MHz bandwidths for 5.7 GHz. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
The highest reported SAR values in this filing in this filing for body-worn and simultaneous transmission exposure conditions are 1.30 W/Kg and 1.55 W/Kg respectively. The highest reported SAR values across all filings under this FCC ID for body-worn and simultaneous transmission exposure conditions are 1.37 W/Kg and 1.55 W/Kg respectively. |
various | Class II permissive change to add portable use condition and antenna in specific host laptop platform (Lenovo Yoga 3 11) as described in this filing. This specific host configuration operates at reduced powers as described in the filing.
Output power listed is conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
The highest reported SAR values for body-worn and simultaneous transmission exposure conditions are <0.1 W/Kg and 1.29 W/Kg respectively. |
various | Class II permissive change to add portable use condition and antenna in specific host laptop platform (Lenovo Yoga 3 11) as described in this filing. This specific host configuration operates at reduced powers as described in the filing.
Output power listed is maximum combined conducted. This This device supports 20 and 40MHz bandwidths for 2.4 Ghz and 20, 40, and 80 MHz bandwidths for 5.7 GHz. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
The highest reported SAR values for body-worn and simultaneous transmission exposure conditions in this filing are 1.22 W/Kg and 1.22 W/Kg respectively. The highest reported SAR values for body-worn and simultaneous transmission exposure conditions across all filings under this FCC ID are 1.37 W/Kg and 1.22 W/Kg respectively. |
various | Class II permissive change to add portable use condition and antenna in specific host laptop platform (Lenovo Yoga 3 11) as described in this filing. This specific host configuration operates at reduced powers as described in the filing.
Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
The highest reported SAR values for body-worn and simultaneous transmission exposure conditions in this filing are 1.29 W/Kg and 1.29 W/Kg respectively. The highest reported SAR values for body-worn and simultaneous transmission exposure conditions across all filings under this FCC ID are 1.29 W/Kg and 1.29 W/Kg respectively. |
various | Class II permissive change to add portable use condition and antenna in specific host laptop platform (Acer/MS2392) as described in this filing.
Output power listed is maximum combined conducted. This device supports 20
and 40MHz bandwidths for 2.4 Ghz and 20, 40, and 80 MHz bandwidths for 5.7
GHz. This module may be installed only by the OEM or an OEM integrator. This
transmitter has been approved for use in mobile RF exposure category
configurations with the antenna(s) installed to provide a separation distance of at
least 20 cm from all persons. The antenna(s) used for this transmitter must not be
collocated or operating in conjunction with any other antenna or transmitter within
a host device, except in accordance with FCC multi-transmitter product
procedures. Grantee must coordinate with OEM integrators to determine
applicable host configurations to ensure RF exposure compliance, including
simultaneous transmission.
The highest reported SAR values for body-worn and simultaneous transmission exposure
conditions are 1.33 W/Kg and 0.86 W/Kg respectively. |
various | Class II permissive change to add portable use condition and antenna in specific host laptop platform (Acer/MS2391) as described in this filing.
Output power listed is maximum combined conducted. This device supports 20
and 40MHz bandwidths for 2.4 Ghz and 20, 40, and 80 MHz bandwidths for 5.7
GHz. This module may be installed only by the OEM or an OEM integrator. This
transmitter has been approved for use in mobile RF exposure category
configurations with the antenna(s) installed to provide a separation distance of at
least 20 cm from all persons. The antenna(s) used for this transmitter must not be
collocated or operating in conjunction with any other antenna or transmitter within
a host device, except in accordance with FCC multi-transmitter product
procedures. Grantee must coordinate with OEM integrators to determine
applicable host configurations to ensure RF exposure compliance, including
simultaneous transmission.
The highest reported SAR values for body-worn and simultaneous transmission exposure
conditions are 1.37 W/Kg and 0.81 W/Kg respectively. |
various | Class II permissive change to add portable use condition and antenna in specific host laptop platform (Acer/MS2391) as described in this filing.
Output power is conducted. This module may be installed only by the OEM or an
OEM integrator. |
various | Class II permissive change to add portable use condition and antenna in specific host laptop platform (Acer/MS2392) as described in this filing.
Output power listed is maximum combined conducted. This device supports 20,
40, and 80 MHz bandwidths. This module may be installed only by the OEM or an
OEM integrator. This transmitter has been approved for use in mobile RF
exposure category configurations with the antenna(s) installed to provide a
separation distance of at least 20 cm from all persons. The antenna(s) used for
this transmitter must not be collocated or operating in conjunction with any other
antenna or transmitter within a host device, except in accordance with FCC multitransmitter
product procedures. The 5150-5250 MHz band is for indoor use only.
Grantee must coordinate with OEM integrators to determine applicable host
configurations to ensure RF exposure compliance, including simultaneous
transmission.
The highest reported SAR values for body-worn and simultaneous transmission exposure
conditions are 0.60 W/Kg and 0.93 W/Kg respectively. |
various | Class II permissive change to add portable use condition and antenna in specific host laptop platform (Acer/MS2391) as described in this filing.
Output power listed is maximum combined conducted. This device supports 20,
40, and 80 MHz bandwidths. This module may be installed only by the OEM or an
OEM integrator. This transmitter has been approved for use in mobile RF
exposure category configurations with the antenna(s) installed to provide a
separation distance of at least 20 cm from all persons. The antenna(s) used for
this transmitter must not be collocated or operating in conjunction with any other
antenna or transmitter within a host device, except in accordance with FCC multitransmitter
product procedures. The 5150-5250 MHz band is for indoor use only.
Grantee must coordinate with OEM integrators to determine applicable host
configurations to ensure RF exposure compliance, including simultaneous
transmission.
The highest reported SAR values for body-worn and simultaneous transmission exposure
conditions are 0.39 W/Kg and 0.72 W/Kg respectively. |
various | Class II permissive change to add portable use condition and antenna in specific host laptop platform (Acer/MS2392) as described in this filing.
Output power is conducted. This module may be installed only by the OEM or an
OEM integrator. |
various | Class II permissive change to add portable use condition and antenna in specific host laptop platform (Acer/MS2395) as described in this filing.
Output power is conducted. This module may be installed only by the OEM or an OEM integrator. |
various | Class II permissive change to add portable use condition and antenna in specific host laptop platform (Acer/MS2395) as described in this filing.
Output power listed is maximum combined conducted. This device supports 20,
40, and 80 MHz bandwidths. This module may be installed only by the OEM or an
OEM integrator. This transmitter has been approved for use in mobile RF
exposure category configurations with the antenna(s) installed to provide a
separation distance of at least 20 cm from all persons. The antenna(s) used for
this transmitter must not be collocated or operating in conjunction with any other
antenna or transmitter within a host device, except in accordance with FCC multitransmitter
product procedures. The 5150-5250 MHz band is for indoor use only.
Grantee must coordinate with OEM integrators to determine applicable host
configurations to ensure RF exposure compliance, including simultaneous
transmission.
The highest reported SAR values for body-worn and simultaneous transmission exposure
conditions are 0.28 W/Kg and 0.62 W/Kg respectively. |
various | Class II permissive change to add portable use condition and antenna in specific host laptop platform (Acer/MS2395) as described in this filing.
Output power listed is maximum combined conducted. This device supports 20
and 40MHz bandwidths for 2.4 Ghz and 20, 40, and 80 MHz bandwidths for 5.7
GHz. This module may be installed only by the OEM or an OEM integrator. This
transmitter has been approved for use in mobile RF exposure category
configurations with the antenna(s) installed to provide a separation distance of at
least 20 cm from all persons. The antenna(s) used for this transmitter must not be
collocated or operating in conjunction with any other antenna or transmitter within
a host device, except in accordance with FCC multi-transmitter product
procedures. Grantee must coordinate with OEM integrators to determine
applicable host configurations to ensure RF exposure compliance, including
simultaneous transmission.
The highest reported SAR values for body-worn and simultaneous transmission exposure
conditions are 0.66 W/Kg and 0.60 W/Kg respectively. |
various | Class II Permissive Change (Diplexer).
Output power listed is maximum combined conducted. This device supports 20 and 40MHz bandwidths for 2.4 GHz and 20, 40, and 80 MHz bandwidths for 5.7 GHz. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons.
Prior Class II Permissive Change allowed for installation in portable hosts, limited to the display section of laptop/notebook/netbook hosts with a minimum 1.5 cm antenna to user separation and 3cm antenna-to-antenna separation. The highest reported SAR values in this filing for this configuration for stand-alone and simultaneous exposure conditions are 0.37 W/kg and 0.74 W/Kg respectively. The highest reported SAR across all filings under this FCC ID for stand-alone and simultaneous exposure conditions are 0.42 W/kg and 0.74 W/Kg respectively.
The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. |
various | Class II Permissive Change to show compliance with New U-NII-1 and U-NII-2 rule per FCC ET docket No. 13-49, add use in portable host devices and a change in the diplexer.
Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons.
Prior Class II Permissive Change allowed for installation in portable hosts, limited to the display section of laptop/notebook/netbook hosts with a minimum 1.5 cm antenna to user separation and 3cm antenna-to-antenna separation. The highest reported SAR values in this filing, and across all filings under this FCC ID, for this configuration for stand-alone and simultaneous exposure conditions are 0.43 W/kg and 0.86 W/Kg respectively.
The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported 1-g body SAR for stand-alone and simultaneous transmission exposure conditions are 0.43W/kg and 0.57W/kg, respectively. The highest reported SAR value across all filings under this FCC ID is 0.42 W/Kg. |
various | Class II Permissive Change (Diplexer)
Output power is conducted. This module may be installed only by the OEM or an OEM integrator. |
various | Class II Permissive Change to allow portable configuration in the display section of laptop/notebook/netbook hosts with minimum 1.5 cm antenna to user separation. The highest reported SAR is 0.41 W/kg.
Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. The 5150-5250 MHz band is for indoor use only. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. |
various | Class II Permissive Change to allow portable configuration in the display section of laptop/notebook/netbook hosts with minimum 1.5 cm antenna to user separation. The highest reported SAR is 0.42 W/kg.
Output power listed is maximum combined conducted. This device supports 20 and 40MHz bandwidths for 2.4 Ghz and 20, 40, and 80 MHz bandwidths for 5.7 GHz. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. |
various | Class II Permissive Change to allow portable configuration in the display section of laptop/notebook/netbook hosts with minimum 1.5 cm antenna to user separation.
Output power is conducted. This module may be installed only by the OEM or an OEM integrator. |
various | Output power is conducted. This module may be installed only by the OEM or an OEM integrator. |
various | Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. The 5150-5250 MHz band is for indoor use only. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. |
various | Output power listed is maximum combined conducted. This device supports 20 and 40MHz bandwidths for 2.4 Ghz and 20, 40, and 80 MHz bandwidths for 5.7 GHz. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. |
various | Is there an equipment authorization waiver associated with this application? | No |
various | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
app
s
|
Test Firm Name and Contact Information
|
various
|
Firm Name |
Bureau Veritas CPS(H.K.) Ltd., Taoyuan Branch
|
various
|
Sporton International Inc.
|
various
|
Bureau Veritas CPS (H.K.) Ltd. Taoyuan Branch
|
various
|
Compliance Certification Services Inc.
|
various
|
Cerpass Technology (SuZhou) Co., Ltd.
|
various
|
SGS Taiwan Ltd.
|
various
|
Bureau Veritas CPS (H.K.) Ltd., Taoyuan Branch
|
various
|
Name |
E******** L******
|
various
|
A****** C******
|
various
|
R**** C******
|
various
|
H**** L********
|
various
|
K****** C******
|
various
|
M**** C****
|
various
|
R****** W******
|
various
|
J****** L******
|
various
|
Telephone Number |
+886-********
|
various
|
886-3******** Extension:
|
various
|
886-3******** Extension:
|
various
|
886-2******** Extension:
|
various
|
886-3******** Extension:
|
various
|
86-05******** Extension:
|
various
|
+886-******** Extension:
|
various
|
886-2******** Extension:
|
various
|
+886-******** Extension:
|
various
|
Fax Number |
+886-********
|
various
|
886-3********
|
various
|
886-3********
|
various
|
886-2********
|
various
|
886-3********
|
various
|
86-05********
|
various
|
+886-********
|
various
|
886 2********
|
various
|
886 3********
|
various
|
+886-********
|
various
|
E-mail |
e******@tw.bureauveritas.com
|
various
|
a******@sporton.com.tw
|
various
|
r******@tw.bureauveritas.com
|
various
|
h******@sgs.com
|
various
|
k******@ccsrf.com
|
various
|
m******@cerpass.net
|
various
|
R******@sgs.com
|
various
|
j******@sgs.com
|
|