app
s
|
Applicant Information
|
|
various
|
Effective |
2018-01-10
|
various
|
2018-01-09
|
various
|
2017-04-10
|
various
|
2016-10-04
|
various
|
2016-07-07
|
various
|
2016-06-09
|
various
|
2016-05-20
|
various
|
2016-03-08
|
various
|
2016-01-15
|
various
|
2015-12-04
|
various
|
2015-10-19
|
various
|
2015-05-28
|
various
|
Applicant's complete, legal business name |
Qualcomm Atheros, Inc.
|
various
|
FCC Registration Number (FRN) |
0003716743
|
various
|
Physical Address |
1700 Technology Dr
|
various
|
San Jose, CA
|
various
|
United States
|
|
app
s
|
TCB Information
|
various
|
TCB Application Email Address |
L******@ul.com
|
various
|
L******@ul.com
|
various
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
various
|
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
|
app
s
|
FCC ID
|
various
|
Grantee Code |
PPD
|
various
|
Equipment Product Code |
QCNFA364AH
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
various
|
Name |
P****** G******
|
various
|
Title |
Vice President, Regulatory Engineering
|
various
|
Telephone Number |
858-6********
|
various
|
Fax Number |
858-6********
|
various
|
E-mail |
p******@qti.qualcomm.com
|
|
app
s
|
Technical Contact
|
various
|
Firm Name |
Sporton International Inc.
|
various
|
QuieTek Corporation
|
various
|
Bureau Veritas Consumer Products Services (H.K.)
|
various
|
Name |
A****** C******
|
various
|
M****** C********
|
various
|
A**** W****
|
various
|
Physical Address |
No.52, HwaYa 1st Rd., Kwei-Shan Hsiang
|
various
|
No.5-22, Ruishukeng, Linkou Dist.
|
various
|
No. 81-1, Lu Liao Keng, 9th Ling,Wu Lung Tsuen
|
various
|
Taoyuan Hsien, 333
|
various
|
New Taipei City, 24451
|
various
|
Hsin Chu Hsien, 307
|
various
|
Taiwan
|
various
|
Telephone Number |
886-3******** Extension:
|
various
|
886-3********
|
various
|
88628******** Extension:
|
various
|
88628********
|
various
|
886 (********
|
various
|
Fax Number |
886-3********
|
various
|
88628********
|
various
|
886 (********
|
various
|
E-mail |
A******@sporton.com.tw;QCARG@qti.qualcomm.com
|
various
|
m******@quietek.com
|
various
|
a******@tw.bureauveritas.com
|
|
app
s
|
Non Technical Contact
|
various
|
Firm Name |
Sporton International Inc.
|
various
|
QuieTek Corporation
|
various
|
Bureau Veritas Consumer Products Services (H.K.)
|
various
|
Name |
A**** C********
|
various
|
M******** C********
|
various
|
A******** W****
|
various
|
Physical Address |
No.52, HwaYa 1st Rd., Kwei-Shan Hsiang
|
various
|
No.5-22, Ruishukeng, Linkou Dist.
|
various
|
No. 81-1, Lu Liao Keng, 9th Ling,Wu Lung Tsuen
|
various
|
Taoyuan Hsien, 333
|
various
|
New Taipei City, 24451
|
various
|
Hsin Chu Hsien, 307
|
various
|
Taiwan
|
various
|
Telephone Number |
886-3******** Extension:
|
various
|
886-3********
|
various
|
88628********
|
various
|
886 (********
|
various
|
Fax Number |
886-3********
|
various
|
88628********
|
various
|
886 (********
|
various
|
E-mail |
A******@sporton.com.tw;QCARG@qti.qualcomm.com
|
various
|
m******@quietek.com
|
various
|
a******@tw.bureauveritas.com
|
|
app
s
|
Confidentiality (long or short term)
|
various |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
various | No |
various | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
various | No |
various | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 01/12/2018 |
various | 10/07/2017 |
various | 04/02/2017 |
various | 07/10/2016 |
various | 11/14/2016 |
various | 02/28/2016 |
various | 01/18/2016 |
various | 12/03/2015 |
various | 06/30/2015 |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
various |
Is this application for software defined/cognitive radio authorization? | No |
various | Equipment Class | NII - Unlicensed National Information Infrastructure TX |
various | DTS - Digital Transmission System |
various | DSS - Part 15 Spread Spectrum Transmitter |
various | JBP - Part 15 Class B Computing Device Peripheral |
various | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | 802.11a/b/g/n/ac + BT 4.1 M.2 2230 Type Card |
various | 2.11A/B/G/N/AC + BT 4.1 M.2 2230 TYPE CARD |
various | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
various | Modular Equipment Type | Single Modular Approval |
various | Does not apply |
various | Purpose / Application is for | Class II Permissive Change |
various | Original Equipment |
various | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
various | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
various | Grant Comments | Class II permissive change to add the specific portable host (Dell Model P29S). Power reduction as per tune-up procedure in order to comply with SAR requirements. Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported for stand-alone and simultaneous transmission exposure conditions in this filing are 0.88 W/kg, and 1.59 W/kg, respectively. The highest reported SAR for stand-alone and simultaneous conditions across all filings under this FCC ID are 1.22W/Kg and 1.59 W/Kg |
various | Class II permissive change to add the specific portable host (Dell Model P29S). Power reduction as per tune-up procedure in order to comply with SAR requirements. Output power listed is maximum combined conducted. This device supports 20 and 40 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for stand-alone and simultaneous transmission exposure conditions in this filing are 0.86 W/kg, and 1.46 W/kg, respectively. The highest reported SAR for stand-alone and simultaneous conditions across all filings under this FCC ID are 1.13 and 1.46 respectively. |
various | Class II permissive change to add the specific portable host (Dell Model P29S). This module may be installed only by the OEM or an OEM integrator. Power reduction as per tune-up procedure in order to comply with SAR requirements. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. . The highest reported SAR for stand-alone and simultaneous transmission exposure conditions in this filing are <0.1 W/kg, and 1.59 W/kg, respectively. The highest reported SAR for stand-alone and simultaneous conditions across all filings under this FCC ID are <0.1 W/kg, and 1.59 W/kg respectively. |
various | Class II Permissive Change to allow portable configuration in the specific laptop/notebook host Dell P73G with
reduced powers and new antennas.
Output power listed is maximum combined conducted. This module may be installed only by the OEM or an OEM
integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the
antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in
portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR
testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and
with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not
be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in
accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating
instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM
integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous
transmission.
The highest reported SAR in this filing for body and simultaneous transmission conditions are 0.80 W/kg and 1.58
W/kg respectively.
The highest reported SAR across all filings under this FCC ID for body and simultaneous transmission conditions
are 1.13 W/kg and 1.58 W/kg respectively. |
various | Class II Permissive Change to allow portable configuration in the specific laptop/notebook host Dell P73G with
reduced powers and new antennas.
Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This
module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in
mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at
least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or
notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at
least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least
3cm. This device supports client-only operating modes in the 5150-5350 MHz and 5470-5725 MHz bands. The antenna
(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or
transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee
must provide installation and operating instructions for complying with FCC multi-transmitter product
procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure
RF exposure compliance, including simultaneous transmission.
The highest reported SAR in this filing for body and simultaneous transmission conditions are 1.19 W/kg and 1.58
W/kg respectively.
The highest reported SAR across all filings under this FCC ID for body and simultaneous transmission conditions
are 1.20 W/kg and 1.58 W/kg respectively. |
various | Class II Permissive Change to allow portable configuration in the specific tablet host Dell T17G with reduced
powers and to disable channels 12 and 13 as described in this filing.
Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This
module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in
mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at
least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or
notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at
least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least
3cm. This device supports client-only operating modes in the 5150-5350 MHz and 5470-5725 MHz bands. The antenna
(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or
transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee
must provide installation and operating instructions for complying with FCC multi-transmitter product
procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure
RF exposure compliance, including simultaneous transmission.
The highest reported SAR in this filing for body and simultaneous transmission conditions are 0.60 W/kg and 0.61
W/kg respectively.
The highest reported SAR across all filings under this FCC ID for body and simultaneous transmission conditions
are 1.20 W/kg and 1.58 W/kg respectively. |
various | Class II Permissive Change to allow portable configuration in the specific laptop/notebook host Dell P73G with
reduced powers and new antennas.
Output power listed is maximum combined conducted. This module may be installed only by the OEM or an OEM
integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the
antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in
portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR
testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and
with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not
be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in
accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating
instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM
integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous
transmission.
The highest reported SAR in this filing for body and simultaneous transmission conditions are < 0.1 W/kg and
1.21 W/kg respectively. The highest reported SAR across all filings under this FCC ID for body and simultaneous
transmission conditions are < 0.1 W/kg and 1.27 W/kg respectively. |
various | Class II Permissive Change to allow portable configuration in the specific tablet host Dell T17G with reduced
powers and to disable channels 12 and 13 as described in this filing.
Output power listed is maximum combined conducted. This module may be installed only by the OEM or an OEM
integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the
antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in
portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR
testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and
with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not
be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in
accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating
instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM
integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous
transmission.
The highest reported SAR in this filing for body and simultaneous transmission conditions are 0.86 W/kg and 0.90
W/kg respectively.
The highest reported SAR across all filings under this FCC ID for body and simultaneous transmission conditions
are 1.13 W/kg and 1.58 W/kg respectively. |
various | Class II Permissive Change to allow portable configuration in the specific tablet host Dell T17G with reduced
powers and to disable channels 12 and 13 as described in this filing.
Output power listed is maximum combined conducted. This module may be installed only by the OEM or an OEM
integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the
antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in
portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR
testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and
with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not
be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in
accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating
instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM
integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous
transmission.
The highest reported SAR in this filing for body and simultaneous transmission conditions are < 0.1 W/kg and
0.90 W/kg respectively. The highest reported SAR across all filings under this FCC ID for body and simultaneous
transmission conditions are < 0.1 W/kg and 1.27 W/kg respectively. |
various | Class II Permissive Change to allow portable configuration in the specific laptop host (Lenovo Legion Y920-17IKB, 80YW), with Wi-Fi Channels 12 & 13 are disabled in this host configuration and a reduced power table as shown in this filing.
Output power listed is maximum combined conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR value across all filings under this FCC ID was < 0.1W/Kg. |
various | Class II Permissive Change to allow portable configuration in the specific laptop host (Lenovo Legion Y920-17IKB, 80YW), with Wi-Fi Channels 12 & 13 are disabled in this host configuration and a reduced power table as shown in this filing.
Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. This device supports client-only operating modes in the 5150-5350 MHz and 5470-5725 MHz bands. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR across all filings under this FCC ID for body and simultaneous transmission conditions are 0.66 W/kg and 0.66 W/kg respectively.
The highest reported SAR in this filing for body and simultaneous transmission conditions are 0.37 W/kg and 0.32 W/kg respectively. |
various | Class II Permissive Change to allow portable configuration in the specific laptop host (Lenovo Legion Y920-17IKB, 80YW), with Wi-Fi Channels 12 & 13 are disabled in this host configuration and a reduced power table as shown in this filing.
Output power listed is maximum combined conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR across all filings under this FCC ID for body and simultaneous transmission conditions are 0.75 W/kg and 0.75 W/kg respectively.
The highest reported SAR in this filing for body and simultaneous transmission conditions are 0.32 W/kg and 0.35 W/kg respectively. |
various | Class II permissive change to add the specific portable host (Dell, Model: P54G). Power reduction as per tune-up procedure in order to comply with SAR requirements and operation on channels 12 and 13 disabled for this host. The highest reported SAR for stand-alone and simultaneous transmission exposure conditions are 1.05 W/kg, and 1.10 W/kg, respectively. Output power listed is maximum combined conducted. This device supports 20 and 40 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest SAR values for stand-alone and simultaneous conditions across all filings under this FCC ID are 1.13 and 1.13 respectively. |
various | Class II permissive change to add the specific portable host (Dell, Model: P54G).This module may be installed only by the OEM or an OEM integrator. Power reduction as per tune-up procedure in order to comply with SAR requirements. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest SAR values for stand-alone and simultaneous conditions across all filings under this FCC ID are <0.1 and 1.27 respectively. |
various | Class II permissive change to add the specific portable host (Dell, Model: P54G). Power reduction as per tune-up procedure in order to comply with SAR requirements. The highest reported SAR for stand-alone and simultaneous transmission exposure conditions in this filing are 1.22 W/kg, and 1.31 W/kg, respectively. Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
The highest SAR values for stand-alone and simultaneous conditions across all filings under this FCC ID are 1.20W/Kg and 1.20W/Kg respectively. |
various | Class II permissive change to add the specific portable host (Dell, Model: P56F). Power reduction as per tune-up procedure in order to comply with SAR and RSE requirements.
The highest reported SAR for stand-alone and simultaneous transmission exposure conditions are 1.16 W/kg, and 1.17 W/kg, respectively.
Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator.
Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. |
various | Class II permissive change to add the specific portable host (Dell, Model: P56F). Power reduction as per tune-up procedure in order to comply with SAR and RSE requirements.
The highest reported SAR for stand-alone and simultaneous transmission exposure conditions are 1.10 W/kg, and 1.11 W/kg, respectively.
Output power listed is maximum combined conducted. This device supports 20 and 40 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator.
Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. |
various | Class II permissive change to add the specific portable host (ASUSTeK UX360C) with antenna specified in this filing. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR in this filing for stand-alone and simultaneous transmission exposure conditions are 1.20 W/kg, and 1.20 W/kg, respectively. The highest reported SAR across all filings under this FCCID for stand-alone and simultaneous transmission exposure conditions are 1.20 W/kg, and 1.20 W/kg, respectively. |
various | Class II permissive change to add the specific portable host (ASUSTeK UX360C) with antenna specified in this filing. This device supports 20 and 40 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR in this filing for stand-alone and simultaneous transmission exposure conditions are 1.13 W/kg, and 1.13 W/kg, respectively. The highest reported SAR across all filings under this FCCID for stand-alone and simultaneous transmission exposure conditions are 1.13 W/kg, and 1.13 W/kg, respectively. |
various | Class II permissive change to add the specific portable host (ASUSTeK UX360C) with antenna specified in this filing. This module may be installed only by the OEM or an OEM integrator. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR in this filing for stand-alone and simultaneous transmission exposure conditions are < 0.10 W/kg, and 0.65 W/kg, respectively. The highest reported SAR across all filings under this FCCID for stand-alone and simultaneous transmission exposure conditions are <0.1 W/kg, and 1.27 W/kg, respectively. |
various | Class II permissive change to add the specific portable host (Lenovo ideapad Y900-17ISK).
The highest reported SAR for stand-alone and simultaneous transmission exposure conditions are < 0.10 W/kg, and 0.65 W/kg, respectively.
This module may be installed only by the OEM or an OEM integrator. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. |
various | Class II permissive change to add the specific portable host (Lenovo ideapad Y900-17ISK).
The highest reported SAR for stand-alone and simultaneous transmission exposure conditions are 0.43 W/kg, and 0.45 W/kg, respectively.
This device supports 20 and 40 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator.
Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. |
various | Class II permissive change to add the specific portable host (Lenovo ideapad Y900-17ISK).
The highest reported SAR for stand-alone and simultaneous transmission exposure conditions are 0.87 W/kg, and 0.65 W/kg, respectively.
This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator.
Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. |
various | Class II Permissive change to adjust power on channel 159 using the minimum RF separation distance of 0.5cm and reduced power as described in this filing. Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or tablet or apply to those under keyboard where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 0.5cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. This device supports client-only operating modes in the 5150-5350 MHz and 5470-5725 MHz bands. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions are 0.79 W/kg and 0.82 W/kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 0.79 W/Kg and 0.82 W/Kg respectively. |
various | Class II Permissive Change to add dipole antenna. Output power listed is maximum combined conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. |
various | Class II Permissive Change to add dipole antenna. Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This device supports client-only operating modes in the 5150-5350 MHz and 5470-5725 MHz bands. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. |
various | Class II Permissive Change to add dipole antenna.
Output power listed is maximum combined conducted. This device supports 20 and 40MHz bandwidths for 2.4 GHz. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. |
various | Class II Permissive Change. |
various | Class II Permissive change to increase the minimum RF separation distance to 0.5cm and reduced power as described in this filing. Output power listed is maximum combined conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or tablet or apply to those under keyboard where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 0.5cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR value was < 0.1 W/Kg. The highest reported SAR value across all filings under this equipment code and FCC ID was <0.1 W/Kg. |
various | Class II Permissive change to increase the minimum RF separation distance to 0.5cm and reduced power as described in this filing.
Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or tablet or apply to those under keyboard where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 0.5cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. This device supports client-only operating modes in the 5150-5350 MHz and 5470-5725 MHz bands. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions are 0.79 W/kg and 0.82 W/kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 0.79 W/Kg and 0.82 W/Kg respectively. |
various | Class II Permissive change to increase the minimum RF separation distance to 0.5cm and reduced power as described in this filing. Output power listed is maximum combined conducted. This device supports 20 and 40MHz bandwidths for 2.4 GHz. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or tablet or apply to those under keyboard where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 0.5cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions are 0.79 W/kg and 0.82 W/kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 0.79 W/Kg and 0.82 W/Kg respectively. |
various | Class II Permissive change to approve the 5.8GHz band operation as U-NII 3 according to FCC 14-30. Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. This device supports client-only operating modes in the 5150-5350 MHz and 5470-5725 MHz bands. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions are 0.66 W/kg and 0.66 W/kg respectively. |
various | Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. This device supports client-only operating modes in the 5150-5350 MHz and 5470-5725 MHz bands. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions are 0.66 W/kg and 0.66 W/kg respectively. |
various | Output power listed is maximum combined conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR value was < 0.1W/Kg. |
various | Output power listed is maximum combined conducted. This device supports 20 and 40MHz bandwidths for 2.4 GHz. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions are 0.75 W/kg and 0.75 W/kg respectively. |
various | Is there an equipment authorization waiver associated with this application? | No |
various | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
app
s
|
Test Firm Name and Contact Information
|
various
|
Firm Name |
SPORTON International Inc.
|
various
|
Bureau Veritas CPS (H.K.) Ltd., Taoyuan Branch
|
various
|
SPORTON International(KunShan) Inc
|
various
|
SPORTON INTERNATIONAL(KUN SHAN)INC.
|
various
|
Compliance Certification Services Inc. Wugu Lab.
|
various
|
DEKRA TESTING AND CERTIFICATION CO., LTD. LinKou
|
various
|
Compliance Certification Services (KunShan) Inc.
|
various
|
Bureau Veritas CPS (H.K.) Ltd. Taoyuan Branch
|
various
|
Bureau Veritas CPS (H.K) Ltd. Taoyuan Branch
|
various
|
Bureau Veritas Hong Kong Limited
|
various
|
Name |
A**** C****
|
various
|
K******** L********
|
various
|
M****** L****
|
various
|
H****** L********
|
various
|
S******** H******
|
various
|
K**** C****
|
various
|
R****** C****
|
various
|
S**** T****
|
various
|
Telephone Number |
886-3******** Extension:
|
various
|
+886-******** Extension:
|
various
|
86-51********
|
various
|
886-3******** Extension:
|
various
|
88622********
|
various
|
+886-******** Extension:
|
various
|
88633******** Extension:
|
various
|
(02)2********
|
various
|
30136******** Extension:
|
various
|
+886-******** Extension:
|
various
|
85223********
|
various
|
Fax Number |
886-3********
|
various
|
+886-********
|
various
|
886-3********
|
various
|
88622********
|
various
|
+886-********
|
various
|
88633********
|
various
|
(02)2********
|
various
|
+886-********
|
various
|
E-mail |
a******@sporton.com.tw
|
various
|
k******@tw.bureauveritas.com
|
various
|
M******@sporton.com.tw
|
various
|
H******@ccsrf.com
|
various
|
s******@dekra.com
|
various
|
k******@tw.ccsemc.com
|
various
|
r******@tw.bureauveritas.com
|
various
|
s******@hk.bureauveritas.com
|
|