app
s
|
Applicant Information
|
|
various
|
Effective |
2021-08-02
|
various
|
2021-06-01
|
various
|
2018-07-05
|
various
|
2018-04-30
|
various
|
2017-12-04
|
various
|
2017-09-21
|
various
|
2017-09-20
|
various
|
2016-07-07
|
various
|
2015-09-02
|
various
|
Applicant's complete, legal business name |
Qualcomm Atheros, Inc.
|
various
|
FCC Registration Number (FRN) |
0003716743
|
various
|
Physical Address |
1700 Technology Dr
|
various
|
San Jose, CA
|
various
|
San Jose, California 95110
|
various
|
United States
|
|
app
s
|
TCB Information
|
various
|
TCB Application Email Address |
L******@ul.com
|
various
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
various
|
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
|
app
s
|
FCC ID
|
various
|
Grantee Code |
PPD
|
various
|
Equipment Product Code |
QCNFA425
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
various
|
Name |
P******** G******
|
various
|
Title |
Vice President, Regulatory Engineering
|
various
|
Telephone Number |
858-6********
|
various
|
Fax Number |
858-6********
|
various
|
E-mail |
p******@qti.qualcomm.com
|
|
app
s
|
Technical Contact
|
various
|
Firm Name |
BTL Inc.
|
various
|
DEKRA Testing and Certification Co., Ltd.
|
various
|
Bureau Veritas CPS (H.K.) Ltd. Taoyuan Branch
|
various
|
Name |
G****** C********
|
various
|
V******** W******
|
various
|
M******** T****
|
various
|
Physical Address |
No. 68-1, Ln. 169, Sec. 2, Datong Rd., Xizhi Dist.
|
various
|
No.5-22, Ruishukeng, Linkou Dist.
|
various
|
No.19, Hwa Ya 2nd Rd., Wen Hwa Vil.
|
various
|
New Taipei City, 114
|
various
|
New Taipei City
|
various
|
New Taipei City, 24451
|
various
|
Taoyuan City, 33383
|
various
|
Taiwan
|
various
|
Telephone Number |
+886-********
|
various
|
+8862********
|
various
|
886 2******** Extension:
|
various
|
886 2********
|
various
|
886 3******** Extension:
|
various
|
886 3********
|
various
|
Fax Number |
886-2********
|
various
|
886 2********
|
various
|
886 3********
|
various
|
E-mail |
g******@newbtl.com
|
various
|
v******@dekra.com,QCARG@qti.qualcomm.com
|
various
|
M******@tw.bureauveritas.com,QCARG@qti.qualcom
|
|
app
s
|
Non Technical Contact
|
various
|
Firm Name |
DEKRA Testing and Certification Co., Ltd.
|
various
|
Bureau Veritas CPS (H.K.) Ltd. Taoyuan Branch
|
various
|
Name |
V******** W********
|
various
|
M******** T****
|
various
|
Physical Address |
No.5-22, Ruishukeng, Linkou Dist.
|
various
|
No.19, Hwa Ya 2nd Rd., Wen Hwa Vil.
|
various
|
New Taipei City, 24451
|
various
|
Taoyuan City, 33383
|
various
|
Taiwan
|
various
|
Telephone Number |
886 2******** Extension:
|
various
|
886 2********
|
various
|
886 3******** Extension:
|
various
|
886 3********
|
various
|
Fax Number |
886 2********
|
various
|
886 3********
|
various
|
E-mail |
v******@dekra.com,QCARG@qti.qualcomm.com
|
various
|
M******@tw.bureauveritas.com,QCARG@qti.qualcom
|
|
app
s
|
Confidentiality (long or short term)
|
various |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
various | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
various | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 01/29/2022 |
various | 11/28/2021 |
various | 01/01/2019 |
various | 10/27/2018 |
various | 12/30/2017 |
various | 02/25/2018 |
various | 01/03/2017 |
various | 02/28/2016 |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
various |
Is this application for software defined/cognitive radio authorization? | No |
various | Equipment Class | DTS - Digital Transmission System |
various | NII - Unlicensed National Information Infrastructure TX |
various | DSS - Part 15 Spread Spectrum Transmitter |
various | JBP - Part 15 Class B Computing Device Peripheral |
various | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Single Stream 802.11a/b/g/n/ac + BT 4.1 M.2 1216 Type Card |
various | Single Strema 802.11a/b/g/n/ac + BT 4.1 M.2 1216 Type Card |
various | Single Stream 802.11a/b/g/n/ac + BT 4.1 M.2 1216 TypeCard |
various | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
various | Modular Equipment Type | Single Modular Approval |
various | Purpose / Application is for | Class II Permissive Change |
various | Class II permissive change or modification of presently authorized equipment |
various | Original Equipment |
various | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
various | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
various | Grant Comments | Class II permissive change filing to add new hosts (Dynabook E10-S, SATELLIET Pro E10-S, Dynabook E10W-S, SATELLITE PRO E10W-S) Portable Computers with new antenna and reduced power as documented in this filing. The highest reported body SAR value is 1.34 W/kg. The highest reported SAR value across all filings under this FCC ID is 1.34 W/kg.
Output power is conducted. This device supports 802.11n/ac bandwidths of 20MHz and 40MHz in the 2.4GHz band and 20MHz, 40MHz, and 80MHz in the 5.8 GHz band. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.2cm or 0.5 cm from all persons, with respective power settings and installation according to the integrator instructions. Installation in tablet configurations must provide a separation distance of at least 10 mm between antenna and user with power setting according to the integrator instructions for 0.5 cm separation. The separation distance between the main and auxiliary antennas shall be at least 3.0 cm when positioned horizontally or vertically. Other configurations or lesser separation distances require additional evaluation and certification. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. |
various | Class II permissive change filing to add new hosts (Dynabook E10-S, SATELLIET Pro E10-S, Dynabook E10W-S, SATELLITE PRO E10W-S) Portable Computers with new antenna and reduced power as documented in this filing. The highest reported SAR values for body is 1.40 W/kg. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 1.40 W/kg and 1.50 W/kg respectively.
Output power is conducted. This device supports 20, 40 and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.2 cm or 0.5 cm from all persons, with respective power settings and installation according to the integrator instructions. Installation in tablet configurations must provide a separation distance of at least 10 mm between antenna and user with power settings according to the integrator instructions for 0.5 cm separation. The separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. Other configurations or lesser separation distances require additional evaluation and certification. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. |
various | Class II permissive change filing to add new hosts (Dynabook E10-S, SATELLIET Pro E10-S, Dynabook E10W-S, SATELLITE PRO E10W-S) Portable Computers with new antenna and reduced power as documented in this filing. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 0.31 W/kg and 1.50 W/kg respectively.
Output power is conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.2 cm or 0.5 cm from all persons, with respective power settings and installation according to the integrator instructions. Installation in tablet configurations must provide a separation distance of at least 10 mm between antenna and user with power setting according to the integrator instructions for 0.5 cm separation. The separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. Other configurations or lesser separation distances require additional evaluation and certification. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. |
various | Class II permissive change filing to add new host SATELLIET PRO (Model: C40-H, C50-H, C40-G, C50-G) Portable Computer with new antenna and reduced power as documented in this filing. The highest reported body SAR value is 1.09 W/kg. The highest reported SAR value across all filings under this FCC ID is 1.22 W/kg.
Output power is conducted. This device supports 802.11n/ac bandwidths of 20MHz and 40MHz in the 2.4GHz band and 20MHz, 40MHz, and 80MHz in the 5.8 GHz band. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.2cm or 0.5 cm from all persons, with respective power settings and installation according to the integrator instructions. Installation in tablet configurations must provide a separation distance of at least 10 mm between antenna and user with power setting according to the integrator instructions for 0.5 cm separation. The separation distance between the main and auxiliary antennas shall be at least 3.0 cm when positioned horizontally or vertically. Other configurations or lesser separation distances require additional evaluation and certification. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. |
various | Class II permissive change filing to add new host SATELLIET PRO (Model: C40-H, C50-H, C40-G, C50-G) Portable Computer with new antenna and reduced power as documented in this filing. The highest reported SAR values for body is 1.40 W/kg. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 1.40 W/kg and 1.50 W/kg respectively.
Output power is conducted. This device supports 20, 40 and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.2 cm or 0.5 cm from all persons, with respective power settings and installation according to the integrator instructions. Installation in tablet configurations must provide a separation distance of at least 10 mm between antenna and user with power settings according to the integrator instructions for 0.5 cm separation. The separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. Other configurations or lesser separation distances require additional evaluation and certification. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. |
various | Class II permissive change filing to add new host SATELLIET PRO (Model: C40-H, C50-H, C40-G, C50-G) Portable Computer with new antenna and reduced power as documented in this filing. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 0.31 W/kg and 1.50 W/kg respectively.
Output power is conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.2 cm or 0.5 cm from all persons, with respective power settings and installation according to the integrator instructions. Installation in tablet configurations must provide a separation distance of at least 10 mm between antenna and user with power setting according to the integrator instructions for 0.5 cm separation. The separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. Other configurations or lesser separation distances require additional evaluation and certification. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. |
various | Class II permissive change filing to add new host Lenovo ideapad D330-10IGM Portable Computer with new antenna
and reduced power as documented in this filing.
The highest reported SAR values for body and simultaneous transmission conditions are <0.1 W/kg and 1.38 W/kg
respectively.
The highest reported SAR values for body and simultaneous transmission conditions across all filings under this
FCC ID are 0.31 W/kg and 1.50 W/kg respectively.
Output power is conducted. This module may be installed only by the OEM or an OEM integrator. This
transmitter has been approved for use in mobile RF exposure category configurations
with the antenna(s) installed to provide a separation distance of at least 20 cm from all
persons. This transmitter also has been approved by KDB 616217 SAR modular approval
when operating at reduced power settings as described in this filing. The antenna(s) used
for this device must be installed in the display section of laptop or notebook computers to
provide a separation distance of at least 1.2 cm or 0.5 cm from all persons, with
respective power settings and installation according to the integrator instructions.
Installation in tablet configurations must provide a separation distance of at least 10 mm
between antenna and user with power setting according to the integrator instructions for
0.5 cm separation. The separation distance between the main and auxiliary antennas
shall be at least 3.0cm when positioned horizontally or vertically. Other configurations or
lesser separation distances require additional evaluation and certification. The
antenna(s) used for this transmitter must not be collocated or operating in conjunction
with any other antenna or transmitter within a host device, except in accordance with FCC
multitransmitter product procedures. Grantee must coordinate with OEM integrators to
determine applicable host configurations to ensure RF exposure compliance, including
simultaneous transmission. |
various | Class II permissive change filing to add new host Lenovo ideapad D330-10IGM Portable Computer with new antenna
and reduced power as documented in this filing.
The highest reported SAR value is 1.22 W/kg.
The highest reported SAR value across all filings under this FCC ID is 1.22 W/kg.
Output power is conducted. This device supports 802.11n/ac bandwidths of 20MHz and
40MHz in the 2.4GHz band and 20MHz, 40MHz, and 80MHz in the 5.8 GHz band. This
module may be installed only by the OEM or an OEM integrator. This transmitter has been
approved for use in mobile RF exposure category configurations with the antenna(s)
installed to provide a separation distance of at least 20 cm from all persons. This
transmitter also has been approved by KDB 616217 SAR modular approval when
operating at reduced power settings as described in this filing. The antenna(s) used for
this device must be installed in the display section of laptop or notebook computers to
provide a separation distance of at least 1.2cm or 0.5 cm from all persons, with respective
power settings and installation according to the integrator instructions. Installation in
tablet configurations must provide a separation distance of at least 10 mm between
antenna and user with power setting according to the integrator instructions for 0.5 cm
separation. The separation distance between the main and auxiliary antennas shall be at
least 3.0 cm when positioned horizontally or vertically. Other configurations or lesser
separation distances require additional evaluation and certification. The antenna(s) used
for this transmitter must not be collocated or operating in conjunction with any other
antenna or transmitter within a host device, except in accordance with FCC multitransmitter
product procedures. Grantee must coordinate with OEM integrators to
determine applicable host configurations to ensure RF exposure compliance, including
simultaneous transmission. |
various | Class II permissive change filing to add new host Lenovo ideapad D330-10IGM Portable Computer with new antenna
and reduced power as documented in this filing.
The highest reported SAR values for body and simultaneous transmission conditions are 1.28 W/kg and 1.38 W/kg
respectively.
The highest reported SAR values for body and simultaneous transmission conditions across all filings under this
FCC ID are 1.28 W/kg and 1.50 W/kg respectively.
Output power is conducted. This device supports 20, 40 and 80 MHz bandwidths. This
module may be installed only by the OEM or an OEM integrator. This transmitter has been
approved for use in mobile RF exposure category configurations with the antenna(s)
installed to provide a separation distance of at least 20 cm from all persons. This
transmitter also has been approved by KDB 616217 SAR modular approval when
operating at reduced power settings as described in this filing. The antenna(s) used for
this device must be installed in the display section of laptop or notebook computers to
provide a separation distance of at least 1.2 cm or 0.5 cm from all persons, with
respective power settings and installation according to the integrator instructions.
Installation in tablet configurations must provide a separation distance of at least 10 mm
between antenna and user with power settings according to the integrator instructions for
0.5 cm separation. The separation distance between the main and auxiliary antennas
shall be at least 3.0cm when positioned horizontally or vertically. Other configurations or
lesser separation distances require additional evaluation and certification. The
antenna(s) used for this transmitter must not be collocated or operating in conjunction
with any other antenna or transmitter within a host device, except in accordance with FCC
multitransmitter product procedures. Grantee must coordinate with OEM integrators to
determine applicable host configurations to ensure RF exposure compliance, including
simultaneous transmission |
various | Class II permissive change to add the specific portable host (Samsung NP550XTA) and antenna with power reduction and disable CH12-13 as described in this filing. The highest reported SAR value under this filing is <0.10 W/Kg. The highest reported SAR values across all filings under this FCCID is 1.24 W/kg.
Output power is conducted. This device supports 802.11n/ac bandwidths of 20MHz and 40MHz. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.2cm or 0.5 cm from all persons, with respective power settings and installation according to the integrator instructions. Installation in tablet configurations must provide a separation distance of at least 10 mm between antenna and user with power setting according to the integrator instructions for 0.5 cm separation. The separation distance between the main and auxiliary antennas shall be at least 3.0 cm when positioned horizontally or vertically. Other configurations or lesser separation distances require additional evaluation and certification. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. |
various | Class II permissive change to add the specific portable host (Samsung NP550XTA) and antenna with power reduction as described in this filing. The highest reported SAR value under this filing is <0.10 W/Kg. The highest reported SAR values across all filings under this FCCID for standalone and simultaneous exposure conditions are 1.27 W/kg and 1.50 W/kg respectively.
Output power is conducted. This device supports 20, 40 and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.2 cm or 0.5 cm from all persons, with respective power settings and installation according to the integrator instructions. Installation in tablet configurations must provide a separation distance of at least 10 mm between antenna and user with power settings according to the integrator instructions for 0.5 cm separation. The separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. Other configurations or lesser separation distances require additional evaluation and certification. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. |
various | Class II permissive change to add the specific portable host (Samsung NP550XTA) and antenna with power reduction as described in this filing. The highest reported SAR values across all filings under this FCCID is 0.31 W/kg.
Output power is conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.2 cm or 0.5 cm from all persons, with respective power settings and installation according to the integrator instructions. Installation in tablet configurations must provide a separation distance of at least 10 mm between antenna and user with power setting according to the integrator instructions for 0.5 cm separation. The separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. Other configurations or lesser separation distances require additional evaluation and certification. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. |
various | Class II Permissive Change to add the module and allow portable configuration in the specific laptop/notebook host (ASUS Models TP202N/ R214N /J202N) with reduced power described in the filing.
Output power is conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.2 cm or 0.5 cm from all persons, with respective power settings and installation according to the integrator instructions. Installation in tablet configurations must provide a separation distance of at least 10 mm between antenna and user with power setting according to the integrator instructions for 0.5 cm separation. The separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. Other configurations or lesser separation distances require additional evaluation and certification. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
The highest reported SAR values across all filings under this FCCID for standalone and simultaneous exposure conditions are 0.31 W/kg and 1.50 W/kg respectively. |
various | Class II Permissive Change to add the module and allow portable configuration in the specific laptop/notebook host (ASUS Models TP202N/ R214N /J202N) with reduced power described in the filing. Wi-Fi Channels 12/13 are disabled in this host configuration.
Output power is conducted. This device supports 20 and 40 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.2cm or 0.5 cm from all persons, with respective power settings and installation according to the integrator instructions. Installation in tablet configurations must provide a separation distance of at least 10 mm between antenna and user with power setting according to the integrator instructions for 0.5 cm separation. The separation distance between the main and auxiliary antennas shall be at least 3.0 cm when positioned horizontally or vertically. Other configurations or lesser separation distances require additional evaluation and certification. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
The highest reported SAR value in this application is 0.70 W/kg. The highest reported SAR values across all filings under this FCCID for standalone and simultaneous exposure conditions are 1.24 W/kg and 1.34 W/kg respectively. |
various | Class II Permissive Change to add the module and allow portable configuration in the specific laptop/notebook host (ASUS Models TP202N/ R214N /J202N) with reduced power described in the filing.
Output power is conducted. This device supports 20, 40 and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.2 cm or 0.5 cm from all persons, with respective power settings and installation according to the integrator instructions. Installation in tablet configurations must provide a separation distance of at least 10 mm between antenna and user with power settings according to the integrator instructions for 0.5 cm separation. The separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. Other configurations or lesser separation distances require additional evaluation and certification. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
The highest reported SAR value in this application is 0.87 W/kg. The highest reported SAR values across all filings under this FCCID for standalone and simultaneous exposure conditions are 1.27 W/kg and 1.50 W/kg respectively. |
various | Class II Permissive Change to add the module and allow portable configuration in the specific laptop/notebook host (ASUS Models T103H/R107H/H103H) with reduced power described in the filing.
Output power is conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.2 cm or 0.5 cm from all persons, with respective power settings and installation according to the integrator instructions. Installation in tablet configurations must provide a separation distance of at least 10 mm between antenna and user with power setting according to the integrator instructions for 0.5 cm separation. The separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. Other configurations or lesser separation distances require additional evaluation and certification. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
The highest reported SAR values across all filings under this FCCID for standalone and simultaneous exposure conditions are 0.31 W/kg and 1.50 W/kg respectively. |
various | Class II Permissive Change to add the module and allow portable configuration in the specific laptop/notebook host (ASUS Models T103H/R107H/H103H) with reduced power described in the filing.
Output power is conducted. This device supports 20, 40 and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.2 cm or 0.5 cm from all persons, with respective power settings and installation according to the integrator instructions. Installation in tablet configurations must provide a separation distance of at least 10 mm between antenna and user with power settings according to the integrator instructions for 0.5 cm separation. The separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. Other configurations or lesser separation distances require additional evaluation and certification. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
The highest reported SAR value in this application is 0.64 W/kg. The highest reported SAR values across all filings under this FCCID for standalone and simultaneous exposure conditions are 1.27 W/kg and 1.50 W/kg respectively. |
various | Class II Permissive Change to add the module and allow portable configuration in the specific laptop/notebook host (ASUS Models T103H/R107H/H103H) with reduced power described in the filing. Wi-Fi Channels 12/13 are disabled in this host configuration.
Output power is conducted. This device supports 20 and 40 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.2cm or 0.5 cm from all persons, with respective power settings and installation according to the integrator instructions. Installation in tablet configurations must provide a separation distance of at least 10 mm between antenna and user with power setting according to the integrator instructions for 0.5 cm separation. The separation distance between the main and auxiliary antennas shall be at least 3.0 cm when positioned horizontally or vertically. Other configurations or lesser separation distances require additional evaluation and certification. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
The highest reported SAR value in this application is 0.6 W/kg. The highest reported SAR values across all filings under this FCCID for standalone and simultaneous exposure conditions are 1.24 W/kg and 1.34 W/kg respectively. |
various | Class II Permissive Change to add the module and allow portable configuration in the specific laptop/notebook host (ASUS models T101H / H101H / R105H). Output power is conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.2 cm or 0.5 cm from all persons, with respective power settings and installation according to the integrator instructions. Installation in tablet configurations must provide a separation distance of at least 10 mm between antenna and user with power setting according to the integrator instructions for 0.5 cm separation. The separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. Other configurations or lesser separation distances require additional evaluation and certification. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR values for body and simultaneous exposure conditions are <0.1 W/kg and 1.29 W/Kg respectively. |
various | Class II Permissive Change to add the module and allow portable configuration in the specific laptop/notebook host (ASUS models T101H / H101H / R105H). Output power is conducted. This device supports 802.11n/ac bandwidths of 20MHz and 40MHz in the 2.4GHz band and 20MHz, 40MHz, and 80MHz in the 5.8 GHz band. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.2cm or 0.5 cm from all persons, with respective power settings and installation according to the integrator instructions. Installation in tablet configurations must provide a separation distance of at least 10 mm between antenna and user with power setting according to the integrator instructions for 0.5 cm separation. The separation distance between the main and auxiliary antennas shall be at least 3.0 cm when positioned horizontally or vertically. Other configurations or lesser separation distances require additional evaluation and certification. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR values for body and simultaneous exposure conditions are 1.08 W/Kg and 1.29 W/Kg respectively. |
various | Class II Permissive Change to add the module and allow portable configuration in the specific laptop/notebook host (ASUS models T101H / H101H / R105H). Output power is conducted. This device supports 20, 40 and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.2 cm or 0.5 cm from all persons, with respective power settings and installation according to the integrator instructions. Installation in tablet configurations must provide a separation distance of at least 10 mm between antenna and user with power settings according to the integrator instructions for 0.5 cm separation. The separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. Other configurations or lesser separation distances require additional evaluation and certification. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR values for body and simultaneous exposure conditions are 0.39 W/kg and 0.61 W/kg respectively. |
various | Output power is conducted. This device supports 802.11n/ac bandwidths of 20MHz and 40MHz in the 2.4GHz band and 20MHz, 40MHz, and 80MHz in the 5.8 GHz band. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.2cm or 0.5 cm from all persons, with respective power settings and installation according to the integrator instructions. Installation in tablet configurations must provide a separation distance of at least 10 mm between antenna and user with power setting according to the integrator instructions for 0.5 cm separation. The separation distance between the main and auxiliary antennas shall be at least 3.0 cm when positioned horizontally or vertically. Other configurations or lesser separation distances require additional evaluation and certification. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR value for body exposure conditions with 1.2 cm separation is 0.15 W/kg. The highest reported SAR value for body exposure conditions with 0.5 cm separation is 0.39 W/Kg. |
various | Output power is conducted. This device supports 20, 40 and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.2 cm or 0.5 cm from all persons, with respective power settings and installation according to the integrator instructions. Installation in tablet configurations must provide a separation distance of at least 10 mm between antenna and user with power settings according to the integrator instructions for 0.5 cm separation. The separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. Other configurations or lesser separation distances require additional evaluation and certification. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR values for body and simultaneous exposure conditions with 1.2 cm separation are 0.56 W/kg and 0.57 W/kg respectively. The highest reported SAR values for body and simultaneous exposure conditions with 0.5 cm separation are 0.63 W/Kg and 0.65 W/kg respectively. |
various | Output power is conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.2 cm or 0.5 cm from all persons, with respective power settings and installation according to the integrator instructions. Installation in tablet configurations must provide a separation distance of at least 10 mm between antenna and user with power setting according to the integrator instructions for 0.5 cm separation. The separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. Other configurations or lesser separation distances require additional evaluation and certification. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR values for body and simultaneous exposure conditions with 1.2 cm separation are <0.1 W/kg and and 0.57 W/kg respectively. The highest reported SAR values for body and simultaneous exposure conditions with 0.5 cm separation are <0.1 W/kg and and 0.65 W/kg respectively. |
various | Is there an equipment authorization waiver associated with this application? | No |
various | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
app
s
|
Test Firm Name and Contact Information
|
various
|
Firm Name |
BTL Inc.
|
various
|
Shenzhen BALUN Technology Co., Ltd.
|
various
|
KCTL INC
|
various
|
DEKRA TESTING AND CERTIFICATION CO., LTD. LinKou
|
various
|
Bureau Veritas CPS(H.K.) Ltd., Taoyuan Branch
|
various
|
Bureau Veritas CPS (H.K.) Ltd., Taoyuan Branch
|
various
|
Bureau Veritas CPS (H.K.) Ltd. Taoyuan Branch
|
various
|
Name |
A**** Y********
|
various
|
H******** Q******
|
various
|
J**** B******
|
various
|
S****** H****
|
various
|
E**** L********
|
various
|
K******** L******
|
various
|
R**** C******
|
various
|
Telephone Number |
+886-******** Extension:
|
various
|
086-7********
|
various
|
82-70********
|
various
|
+886-******** Extension:
|
various
|
+886-********
|
various
|
+886-******** Extension:
|
various
|
886-3******** Extension:
|
various
|
Fax Number |
+886-********
|
various
|
82-50********
|
various
|
+886-********
|
various
|
+886-********
|
various
|
+886-********
|
various
|
886-3********
|
various
|
E-mail |
a******@btl.com.tw
|
various
|
q******@baluntek.com
|
various
|
j******@kctl.co.kr
|
various
|
s******@dekra.com
|
various
|
e******@tw.bureauveritas.com
|
various
|
k******@tw.bureauveritas.com
|
various
|
r******@tw.bureauveritas.com
|
|