app
s
|
Applicant Information
|
|
1 2
|
Effective |
2017-02-16
|
1 2
|
Applicant's complete, legal business name |
LITE-ON Technology Corp.
|
1 2
|
FCC Registration Number (FRN) |
0014765044
|
1 2
|
Physical Address |
Bldg. C, 90, Chien 1 Rd., Chung-Ho
|
1 2
|
New Taipei City,, N/A 23585
|
1 2
|
Taiwan
|
|
app
s
|
TCB Information
|
1 2
|
TCB Application Email Address |
T******@TIMCOENGR.COM
|
1 2
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|
app
s
|
FCC ID
|
1 2
|
Grantee Code |
PPQ
|
1 2
|
Equipment Product Code |
WN4519L
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
1 2
|
Name |
T******** W******
|
1 2
|
Title |
Deputy Director(R & D Division)
|
1 2
|
Telephone Number |
86-22******** Extension:
|
1 2
|
Fax Number |
86-22********
|
1 2
|
E-mail |
t******@liteon.com
|
|
app
s
|
Technical Contact
|
|
|
n/a |
|
app
s
|
Non Technical Contact
|
|
|
n/a |
|
app
s
|
Confidentiality (long or short term)
|
1 2 |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
1 2 | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
1 2 |
Is this application for software defined/cognitive radio authorization? | No |
1 2 | Equipment Class | NII - Unlicensed National Information Infrastructure TX |
1 2 | DTS - Digital Transmission System |
1 2 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | 802.11a/b/g/n/ac 2Tx2R USB Combo Module |
1 2 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
1 2 | Modular Equipment Type | Single Modular Approval |
1 2 | Purpose / Application is for | Original Equipment |
1 2 | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
1 2 | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
1 2 | Grant Comments | Single Modular Approval. Power listed is maximum power conducted. This module is restricted to installation in products for use only in mobile and fixed applications. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Grantee is responsible for providing specific testing instructions to host manufacturers for additional testing to verify compliance as a composite system. This includes retesting of transmitter module per part 15.31(h) and (k). This device has 20, 40, and 80MHz bandwidth modes. |
1 2 | Single Modular Approval. Power listed is maximum power conducted. This module is restricted to installation in products for use only in mobile and fixed applications. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Grantee is responsible for providing specific testing instructions to host manufacturers for additional testing to verify compliance as a composite system. This includes retesting of transmitter module per part 15.31(h) and (k). This device has 20 and 40MHz bandwidth modes. |
1 2 | Is there an equipment authorization waiver associated with this application? | No |
1 2 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
app
s
|
Test Firm Name and Contact Information
|
1 2
|
Firm Name |
SPORTON International Inc.
|
1 2
|
Name |
S******** J********
|
1 2
|
Telephone Number |
886-3******** Extension:
|
1 2
|
Fax Number |
886-3********
|
1 2
|
E-mail |
s******@sporton.com.tw
|
|