app
s
|
Applicant Information
|
|
1 2 3
|
Effective |
2012-07-27
|
1 2 3
|
2011-05-09
|
1 2 3
|
Applicant's complete, legal business name |
Hewlett Packard Enterprise Company
|
1 2 3
|
FCC Registration Number (FRN) |
0009155128
|
1 2 3
|
Physical Address |
3333 Scott Blvd
|
1 2 3
|
Santa Clara, California 94089
|
1 2 3
|
United States
|
|
app
s
|
TCB Information
|
1 2 3
|
TCB Application Email Address |
c******@micomlabs.com
|
1 2 3
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|
app
s
|
FCC ID
|
1 2 3
|
Grantee Code |
Q9D
|
1 2 3
|
Equipment Product Code |
AP134135
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
1 2 3
|
Name |
R**** H********
|
1 2 3
|
Title |
Compliance Manager
|
1 2 3
|
Telephone Number |
650-2********
|
1 2 3
|
Fax Number |
408-2********
|
1 2 3
|
E-mail |
r******@hpe.com
|
|
app
s
|
Technical Contact
|
|
|
n/a |
|
app
s
|
Non Technical Contact
|
|
|
n/a |
|
app
s
|
Confidentiality (long or short term)
|
1 2 3 |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
1 2 3 | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
1 2 3 |
Is this application for software defined/cognitive radio authorization? | Yes |
1 2 3 | Equipment Class | NII - Unlicensed National Information Infrastructure TX |
1 2 3 | DTS - Digital Transmission System |
1 2 3 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | IEEE 802.11a/b/g/n Access Point |
1 2 3 | IEEE 802.11 a/b/g/n Access Point |
1 2 3 | IEEE 802.11 a/b/g/n |
1 2 3 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | Yes |
1 2 3 | Modular Equipment Type | Does not apply |
1 2 3 | Purpose / Application is for | Class III permissive change to software defined radio |
1 2 3 | Original Equipment |
1 2 3 | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
1 2 3 | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
1 2 3 | Grant Comments | Output power is conducted. This device supports 20MHz and 40 MHz modes. Outdoor operation is subject to the professional installation instruction requirements as described in the Users Manual. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
1 2 3 | Software Defined Radio: Power Output listed is conducted. Device is an 802.11n device in a 3x3 Spatial Multiplexing MIMO configuration as described in this filing. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
1 2 3 | Software Defined Radio. Output power listed is conducted. Professional installation is required. Device is operating in a 3x3 Spatial Multiplexing MIMO configuration as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
1 2 3 | Is there an equipment authorization waiver associated with this application? | No |
1 2 3 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
app
s
|
Test Firm Name and Contact Information
|
1 2 3
|
Firm Name |
Micom Labs
|
1 2 3
|
Sporton International Inc.
|
1 2 3
|
Name |
G****** H******
|
1 2 3
|
A******** C******
|
1 2 3
|
Telephone Number |
925-4********
|
1 2 3
|
886-3******** Extension:
|
1 2 3
|
Fax Number |
925-4********
|
1 2 3
|
886-3********
|
1 2 3
|
E-mail |
g******@micomlabs.com
|
1 2 3
|
a******@sporton.com.tw
|
|