app
s
|
Applicant Information
|
|
1 2 3
|
Effective |
2015-10-13
|
1 2 3
|
2015-07-21
|
1 2 3
|
Applicant's complete, legal business name |
Hewlett Packard Enterprise Company
|
1 2 3
|
FCC Registration Number (FRN) |
0026486175
|
1 2 3
|
Physical Address |
3333 Scott Blvd
|
1 2 3
|
Santa Clara, CA
|
1 2 3
|
United States
|
|
app
s
|
TCB Information
|
1 2 3
|
TCB Application Email Address |
c******@micomlabs.com
|
1 2 3
|
f******@us.tuv.com
|
1 2 3
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|
app
s
|
FCC ID
|
1 2 3
|
Grantee Code |
Q9D
|
1 2 3
|
Equipment Product Code |
APIN0324325
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
1 2 3
|
Name |
R**** H******
|
1 2 3
|
Title |
Compliance Manager
|
1 2 3
|
Telephone Number |
650-2********
|
1 2 3
|
Fax Number |
408-2********
|
1 2 3
|
E-mail |
r******@hpe.com
|
|
app
s
|
Technical Contact
|
1 2 3
|
Firm Name |
MiCOM Labs
|
1 2 3
|
Name |
G**** H********
|
1 2 3
|
Physical Address |
575 Boulder Court
|
1 2 3
|
Pleasanton, California 94566
|
1 2 3
|
Telephone Number |
(925)********
|
1 2 3
|
Fax Number |
(925)********
|
1 2 3
|
E-mail |
c******@micomlabs.com
|
|
app
s
|
Non Technical Contact
|
|
|
n/a |
|
app
s
|
Confidentiality (long or short term)
|
1 2 3 |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
1 2 3 | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No |
1 2 3 | Yes |
1 2 3 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 01/13/2016 |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
1 2 3 |
Is this application for software defined/cognitive radio authorization? | Yes |
1 2 3 | Equipment Class | NII - Unlicensed National Information Infrastructure TX |
1 2 3 | DTS - Digital Transmission System |
1 2 3 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Wireless Access Point |
1 2 3 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | Yes |
1 2 3 | Modular Equipment Type | Does not apply |
1 2 3 | Purpose / Application is for | Class III Permissive Change |
1 2 3 | Original Equipment |
1 2 3 | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
1 2 3 | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
1 2 3 | Grant Comments | Software Defined Radio. Professional installation is required. Power Output listed is conducted. Device is an 802.11a/b/g/n/ac device in a 4x4 Spatial Multiplexing MIMO configuration as described in this filing. The antennas used for this transmitter must be installed to provide a separation distance of at least 27cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has a 20 MHz, 40 MHz and 80 MHz bandwidth modes. |
1 2 3 | Software Defined Radio. Professional installation is required. Power Output listed is conducted. Device is an 802.11a/b/g/n/ac device in a 4x4 Spatial Multiplexing MIMO configuration as described in this filing. The antennas used for this transmitter must be installed to provide a separation distance of at least 27cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
This device has a 20 MHz, 40 MHz and 80 MHz bandwidth modes. |
1 2 3 | Software Defined Radio. Professional installation is required. Power Output listed is conducted. Device is an 802.11a/b/g/n/ac device in a 4x4 Spatial Multiplexing MIMO configuration as described in this filing. The antennas used for this transmitter must be installed to provide a separation distance of at least 27 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
This device has a 20 MHz and 40 MHz bandwidth mode. |
1 2 3 | Is there an equipment authorization waiver associated with this application? | No |
1 2 3 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
app
s
|
Test Firm Name and Contact Information
|
1 2 3
|
Firm Name |
MiCOM Labs
|
1 2 3
|
TUV Rheinland of North America Inc.
|
1 2 3
|
Name |
G**** H********
|
1 2 3
|
D****** S********
|
1 2 3
|
Telephone Number |
925-4********
|
1 2 3
|
(925)********
|
1 2 3
|
Fax Number |
925-4********
|
1 2 3
|
925 2********
|
1 2 3
|
E-mail |
g******@micomlabs.com
|
1 2 3
|
d******@us.tuv.com
|
|