app
s
|
Applicant Information
|
|
1 2 3 4 5
|
Effective |
2016-07-20
|
1 2 3 4 5
|
2016-06-06
|
1 2 3 4 5
|
2014-07-14
|
1 2 3 4 5
|
Applicant's complete, legal business name |
Hewlett Packard Enterprise Company
|
1 2 3 4 5
|
FCC Registration Number (FRN) |
0026486175
|
1 2 3 4 5
|
Physical Address |
3333 Scott Blvd
|
1 2 3 4 5
|
Santa Clara, California 94089
|
1 2 3 4 5
|
United States
|
|
app
s
|
TCB Information
|
1 2 3 4 5
|
TCB Application Email Address |
h******@acbcert.com
|
1 2 3 4 5
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
1 2 3 4 5
|
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
|
app
s
|
FCC ID
|
1 2 3 4 5
|
Grantee Code |
Q9D
|
1 2 3 4 5
|
Equipment Product Code |
APINH103
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
1 2 3 4 5
|
Name |
R****** H********
|
1 2 3 4 5
|
Title |
Compliance Manager
|
1 2 3 4 5
|
Telephone Number |
650-2********
|
1 2 3 4 5
|
Fax Number |
408-2********
|
1 2 3 4 5
|
E-mail |
r******@hpe.com
|
|
app
s
|
Technical Contact
|
1 2 3 4 5
|
Firm Name |
Intertek Testing Services Limited Shanghai
|
1 2 3 4 5
|
Name |
D****** z******
|
1 2 3 4 5
|
D******** Z******
|
1 2 3 4 5
|
Physical Address |
Building No.86, 1198 Qinzhou Road(North)
|
1 2 3 4 5
|
Shanghai
|
1 2 3 4 5
|
Shanghai, 200233
|
1 2 3 4 5
|
China
|
1 2 3 4 5
|
Telephone Number |
86 21********
|
1 2 3 4 5
|
86-21********
|
1 2 3 4 5
|
Fax Number |
86 21********
|
1 2 3 4 5
|
86-21********
|
1 2 3 4 5
|
E-mail |
d******@intertek.com
|
|
app
s
|
Non Technical Contact
|
|
|
n/a |
|
app
s
|
Confidentiality (long or short term)
|
1 2 3 4 5 |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
1 2 3 4 5 | No |
1 2 3 4 5 | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
1 2 3 4 5 |
Is this application for software defined/cognitive radio authorization? | Yes |
1 2 3 4 5 | Equipment Class | NII - Unlicensed National Information Infrastructure TX |
1 2 3 4 5 | DTS - Digital Transmission System |
1 2 3 4 5 | JBP - Part 15 Class B Computing Device Peripheral |
1 2 3 4 5 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Wireless Access Point (APINH103) |
1 2 3 4 5 | Wireless Access Point |
1 2 3 4 5 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | Yes |
1 2 3 4 5 | Modular Equipment Type | Does not apply |
1 2 3 4 5 | Purpose / Application is for | Class III permissive change to software defined radio |
1 2 3 4 5 | Original Equipment |
1 2 3 4 5 | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
1 2 3 4 5 | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
1 2 3 4 5 | Grant Comments | Class III Permissive Change. Software Defined Radio. Power Output listed is conducted. Device is an 802.11n device in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing.The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
This device has a 20 MHz and 40 MHz bandwidth mode. |
1 2 3 4 5 | Class III Permissive Change. Software Defined Radio. Power Output listed is conducted. Device is an 802.11n device in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing.The antennas used for this transmitter must be installed to provide a separation distance of at least 20
cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
This device has a 20 MHz and 40 MHz bandwidth mode. |
1 2 3 4 5 | Software Defined Radio. Power Output listed is conducted. Device is an 802.11n
device on a 2x2 Spatial Multiplexing MIMO configuration as described in this
filing.The antennas used for this transmitter must be installed to provide a
separation distance of at least 20 cm from all persons and not be co-located with
any other transmitters except in accordance with FCC multi-transmitter product
procedures. End-users and installers must be provided with antenna installation
instructions and transmitter operating conditions for satisfying RF exposure
compliance.
This device has a 20 MHz and 40 MHz bandwidth mode. |
1 2 3 4 5 | Software Defined Radio. Power Output listed is conducted. Device is an 802.11n
device in a 2x2 Spatial Multiplexing MIMO configuration as described in this
filing.The antennas used for this transmitter must be installed to provide a
separation distance of at least 20 cm from all persons and not be co-located with
any other transmitters except in accordance with FCC multi-transmitter product
procedures. End-users and installers must be provided with antenna installation
instructions and transmitter operating conditions for satisfying RF exposure
compliance.
This device has a 20 MHz and 40 MHz bandwidth mode. |
1 2 3 4 5 | Is there an equipment authorization waiver associated with this application? | No |
1 2 3 4 5 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
app
s
|
Test Firm Name and Contact Information
|
1 2 3 4 5
|
Firm Name |
Intertek Testing Services Limited Shanghai
|
1 2 3 4 5
|
Name |
J**** J********
|
1 2 3 4 5
|
Telephone Number |
86-21********
|
1 2 3 4 5
|
Fax Number |
86-21********
|
1 2 3 4 5
|
E-mail |
j******@intertek.com
|
|