app
s
|
Applicant Information
|
|
1 2 3
|
Effective |
2017-02-01
|
1 2 3
|
2017-01-05
|
1 2 3
|
Applicant's complete, legal business name |
CommScope Technologies LLC
|
1 2 3
|
FCC Registration Number (FRN) |
0024704082
|
1 2 3
|
Physical Address |
250 Apollo Drive
|
1 2 3
|
Chelmsford, Massachusetts 01571
|
1 2 3
|
United States
|
|
app
s
|
TCB Information
|
1 2 3
|
TCB Application Email Address |
t******@metlabs.com
|
1 2 3
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
1 2 3
|
B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
|
|
app
s
|
FCC ID
|
1 2 3
|
Grantee Code |
QHY
|
1 2 3
|
Equipment Product Code |
S1000R
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
1 2 3
|
Name |
K****** C******
|
1 2 3
|
Title |
HW Project Manager
|
1 2 3
|
Telephone Number |
(978)********
|
1 2 3
|
Fax Number |
(978)********
|
1 2 3
|
E-mail |
k******@commscope.com
|
|
app
s
|
Technical Contact
|
1 2 3
|
Firm Name |
CommScope Technologies LLC
|
1 2 3
|
Name |
K******** C******
|
1 2 3
|
Physical Address |
250 Apollo Drive
|
1 2 3
|
Chelmsford, 01824
|
1 2 3
|
Chelmsford, Massachusetts 01824
|
1 2 3
|
United States
|
1 2 3
|
Telephone Number |
978-2********
|
1 2 3
|
Fax Number |
978-2********
|
1 2 3
|
E-mail |
K******@commscope.com
|
|
app
s
|
Non Technical Contact
|
|
|
n/a |
|
app
s
|
Confidentiality (long or short term)
|
1 2 3 |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
1 2 3 | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
1 2 3 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 07/04/2017 |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
1 2 3 |
Is this application for software defined/cognitive radio authorization? | No |
1 2 3 | Equipment Class | NII - Unlicensed National Information Infrastructure TX |
1 2 3 | DTS - Digital Transmission System |
1 2 3 | PCB - PCS Licensed Transmitter |
1 2 3 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | LTE and Dual-Band Wi-Fi Indoor Relay Small Cell |
1 2 3 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | Yes |
1 2 3 | No |
1 2 3 | Modular Equipment Type | Does not apply |
1 2 3 | Purpose / Application is for | Original Equipment |
1 2 3 | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
1 2 3 | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
1 2 3 | Grant Comments | Output power is conducted. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device supports 20, 40 and 80 MHz bandwidths. |
1 2 3 | Output power is conducted. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
1 2 3 | Output power listed is ERP for operations below 1 GHz and EIRP for operations above 1 GHz. Output power listed is ERP for Part 22/90 and EIRP for Part 24/27. Values listed for LTE operations are for the highest power and the widest bandwidth for each band and modulation. Single modular approval for mobile RF exposure conditions. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installations only. OEM integrators and end users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.The maximum antenna gain is 1.2dBi in 825.5-847.5 MHz, 1.7dBi in 1851.5-1913.5 MHz, 2.7dBi in 2510-2560 MHz / 2630-2680MHz and 1.2dBi in 815.5-822.5MHz, 4.2 dBi in 2496-2690MHz bands. |
1 2 3 | Is there an equipment authorization waiver associated with this application? | No |
1 2 3 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
app
s
|
Test Firm Name and Contact Information
|
1 2 3
|
Firm Name |
Eurofins MET Laboratories, Inc.
|
1 2 3
|
Name |
J****** F****
|
1 2 3
|
Telephone Number |
41094********
|
1 2 3
|
Fax Number |
41035********
|
1 2 3
|
E-mail |
j******@metlabs.com
|
|