app
s
|
Applicant Information
|
|
1 2 3 4
|
Effective |
2013-05-24
|
1 2 3 4
|
2012-07-06
|
1 2 3 4
|
2012-03-27
|
1 2 3 4
|
2011-03-16
|
1 2 3 4
|
Applicant's complete, legal business name |
Silicon Laboratories Finland Oy
|
1 2 3 4
|
FCC Registration Number (FRN) |
0007782659
|
1 2 3 4
|
Physical Address |
Alberga Business Park, Bertel Jungin aukio 3
|
1 2 3 4
|
Espoo, N/A 02600
|
1 2 3 4
|
Finland
|
|
app
s
|
TCB Information
|
1 2 3 4
|
TCB Application Email Address |
t******@babt.com
|
1 2 3 4
|
P******@tracglobal.com
|
1 2 3 4
|
s******@nemko.com
|
1 2 3 4
|
p******@tracglobal.com
|
1 2 3 4
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|
app
s
|
FCC ID
|
1 2 3 4
|
Grantee Code |
QOQ
|
1 2 3 4
|
Equipment Product Code |
WT11IA
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
1 2 3 4
|
Name |
P**** R******
|
1 2 3 4
|
Title |
Staff HW Engineer
|
1 2 3 4
|
Telephone Number |
+3589********
|
1 2 3 4
|
Fax Number |
+3589********
|
1 2 3 4
|
E-mail |
p******@silabs.com
|
|
app
s
|
Technical Contact
|
1 2 3 4
|
Firm Name |
JLT Mobile Computers AB
|
1 2 3 4
|
Name |
P**** A****
|
1 2 3 4
|
Physical Address |
Isbjrnsvgen 3
|
1 2 3 4
|
Vxj, SE-352 45
|
1 2 3 4
|
Sweden
|
1 2 3 4
|
Telephone Number |
46 47********
|
1 2 3 4
|
Fax Number |
46 47********
|
1 2 3 4
|
E-mail |
P******@jltmobile.com
|
|
app
s
|
Non Technical Contact
|
1 2 3 4
|
Firm Name |
JLT Mobile Computers AB
|
1 2 3 4
|
Name |
P**** H******
|
1 2 3 4
|
Physical Address |
Isbjrnsvgen 3
|
1 2 3 4
|
Vxj, SE-352 45
|
1 2 3 4
|
Sweden
|
1 2 3 4
|
Telephone Number |
46 47********
|
1 2 3 4
|
Fax Number |
46 47********
|
1 2 3 4
|
E-mail |
P******@jltmobile.com
|
|
app
s
|
Confidentiality (long or short term)
|
1 2 3 4 |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
1 2 3 4 | No |
1 2 3 4 | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
1 2 3 4 | No |
1 2 3 4 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 11/20/2013 |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
1 2 3 4 |
Is this application for software defined/cognitive radio authorization? | No |
1 2 3 4 | Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
1 2 3 4 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Bluetooth module WT11i-A |
1 2 3 4 | Bluetooth Module WT11i-a |
1 2 3 4 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
1 2 3 4 | Modular Equipment Type | Does not apply |
1 2 3 4 | Single Modular Approval |
1 2 3 4 | Purpose / Application is for | Class II permissive change or modification of presently authorized equipment |
1 2 3 4 | Original Equipment |
1 2 3 4 | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | No |
1 2 3 4 | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
1 2 3 4 | Yes |
1 2 3 4 | Grant Comments | Modular Approval. Class II Permissive Change. Output power listed is conducted. This permissive change provides for Portable use when integrated into a Polar Team2 Transmitter as documented in this filing. This grant is valid only when the module is installed by the OEM or OEM integrators. The OEM integrators must be provided with antenna installation instructions. End-users may not be provided with the module installation instructions.
The highest reported SAR is 0.349 W/kg. |
1 2 3 4 | Output power listed is conducted. Modular Approval. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no instructions to remove or install the device. |
1 2 3 4 | Modular Approval. Power output listed is conducted. This permissive change provides for co-location with specific transmitters in a mobile configuration as documented in this filing. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antennas used for this transmitter as shown in this filing must be installed to provide a separation distance of at least 20 cm
from all persons. End-users may not be provided with the module istallation
instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
1 2 3 4 | Output power listed is conducted. Modular Approval for mobile RF Exposure conditions, this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no instructions to remove or install the device. |
1 2 3 4 | Is there an equipment authorization waiver associated with this application? | No |
1 2 3 4 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
app
s
|
Test Firm Name and Contact Information
|
1 2 3 4
|
Firm Name |
DEKRA Testing and Certification, S.A.U.
|
1 2 3 4
|
Element Materials Technology Warwick Ltd
|
1 2 3 4
|
Nemko Canada Inc
|
1 2 3 4
|
Name |
F****** C******
|
1 2 3 4
|
M****** L****
|
1 2 3 4
|
S****** B****
|
1 2 3 4
|
Telephone Number |
34-95********
|
1 2 3 4
|
44014********
|
1 2 3 4
|
61373******** Extension:
|
1 2 3 4
|
Fax Number |
34-95********
|
1 2 3 4
|
44 (0********
|
1 2 3 4
|
61373********
|
1 2 3 4
|
E-mail |
f******@dekra.com
|
1 2 3 4
|
m******@element.com
|
1 2 3 4
|
s******@nemko.com
|
|