app
s
|
Applicant Information
|
|
1 2 3 4 5 6 7
|
Effective |
2017-01-24
|
1 2 3 4 5 6 7
|
2015-01-20
|
1 2 3 4 5 6 7
|
2013-11-01
|
1 2 3 4 5 6 7
|
2013-05-15
|
1 2 3 4 5 6 7
|
2013-01-10
|
1 2 3 4 5 6 7
|
2011-12-23
|
1 2 3 4 5 6 7
|
2011-03-18
|
1 2 3 4 5 6 7
|
Applicant's complete, legal business name |
Silicon Laboratories Finland Oy
|
1 2 3 4 5 6 7
|
FCC Registration Number (FRN) |
0007782659
|
1 2 3 4 5 6 7
|
Physical Address |
Alberga Business Park, Bertel Jungin aukio 3
|
1 2 3 4 5 6 7
|
Espoo, N/A 02600
|
1 2 3 4 5 6 7
|
Finland
|
|
app
s
|
TCB Information
|
1 2 3 4 5 6 7
|
TCB Application Email Address |
R******@element.com
|
1 2 3 4 5 6 7
|
h******@acbcert.com
|
1 2 3 4 5 6 7
|
p******@tracglobal.com
|
1 2 3 4 5 6 7
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|
app
s
|
FCC ID
|
1 2 3 4 5 6 7
|
Grantee Code |
QOQ
|
1 2 3 4 5 6 7
|
Equipment Product Code |
WT41
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
1 2 3 4 5 6 7
|
Name |
P**** R****
|
1 2 3 4 5 6 7
|
Title |
Staff HW Engineer
|
1 2 3 4 5 6 7
|
Telephone Number |
+3589********
|
1 2 3 4 5 6 7
|
Fax Number |
+3589********
|
1 2 3 4 5 6 7
|
E-mail |
p******@silabs.com
|
|
app
s
|
Technical Contact
|
1 2 3 4 5 6 7
|
Firm Name |
Bluegiga Technologies Inc
|
1 2 3 4 5 6 7
|
Bluegiga Technologies Oy
|
1 2 3 4 5 6 7
|
Name |
P**** R****
|
1 2 3 4 5 6 7
|
Physical Address |
Sinikalliontie 5A
|
1 2 3 4 5 6 7
|
120
|
1 2 3 4 5 6 7
|
Espoo, 02630
|
1 2 3 4 5 6 7
|
Finland
|
1 2 3 4 5 6 7
|
Telephone Number |
35840********
|
1 2 3 4 5 6 7
|
+3584********
|
1 2 3 4 5 6 7
|
E-mail |
p******@bluegiga.com
|
|
app
s
|
Non Technical Contact
|
1 2 3 4 5 6 7
|
Firm Name |
Bluegiga Technologies Inc
|
1 2 3 4 5 6 7
|
Bluegiga Technologies Oy
|
1 2 3 4 5 6 7
|
Name |
P****** R********
|
1 2 3 4 5 6 7
|
Physical Address |
Sinikalliontie 5A
|
1 2 3 4 5 6 7
|
120
|
1 2 3 4 5 6 7
|
Espoo, 02630
|
1 2 3 4 5 6 7
|
Finland
|
1 2 3 4 5 6 7
|
Telephone Number |
35840********
|
1 2 3 4 5 6 7
|
+3584********
|
1 2 3 4 5 6 7
|
E-mail |
p******@bluegiga.com
|
|
app
s
|
Confidentiality (long or short term)
|
1 2 3 4 5 6 7 |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
1 2 3 4 5 6 7 | No |
1 2 3 4 5 6 7 | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
1 2 3 4 5 6 7 |
Is this application for software defined/cognitive radio authorization? | No |
1 2 3 4 5 6 7 | Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
1 2 3 4 5 6 7 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | WT41 Bluetooth Module |
1 2 3 4 5 6 7 | WT41 long range class 1, Bluetooth 2.1 + EDR module |
1 2 3 4 5 6 7 | WT41 |
1 2 3 4 5 6 7 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
1 2 3 4 5 6 7 | Modular Equipment Type | Does not apply |
1 2 3 4 5 6 7 | Single Modular Approval |
1 2 3 4 5 6 7 | Purpose / Application is for | Class II permissive change or modification of presently authorized equipment |
1 2 3 4 5 6 7 | Original Equipment |
1 2 3 4 5 6 7 | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | No |
1 2 3 4 5 6 7 | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
1 2 3 4 5 6 7 | Grant Comments | Modular Approval. Output power listed is radiated.
This grant is valid only when the module is sold to OEM integrators and must be installed by OEM integrators. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons.
CIIPC: Class II Permissive Change to add a new antenna. Reduced conducted output power implemented according to new antenna gain used as described on this filling. Radiated power in compliance with original filling. |
1 2 3 4 5 6 7 | Output power listed is conducted. Single Modular Approval for mixed mobile and portable RF Exposure conditions, this transmitter must be installed to provide a separation distance of at least 22 mm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no instructions to remove or install the device.
Only the antennas listed with this filing and documented in the test report and user manual can be used with this module. This Grant covers variants WT41A and WT41N.
Class 2 Permissive Change for a new antenna. |
1 2 3 4 5 6 7 | Output power listed is conducted. Single Modular Approval for mixed mobile and portable RF Exposure conditions. This Grant covers variants WT41A and WT41N
Mobile Exposure conditions: This transmitter must be installed to provide a separation distance of at least 22 mm from all persons.
Portable RF Exposure conditions: This Grant covers a Class 2 Permissive Change for variant WT41A in order to allow portable use with 0 cm separation distance in a specific host SF61B Cordless Scanner. The highest reported SAR value is: Body-worn 1.07 W/kg.
General RF Exposure conditions: This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no instructions to remove or install the device. Only the antennas listed with this filing and documented in the test report and user manual can be used with this module. |
1 2 3 4 5 6 7 | Output power listed is conducted. Single Modular Approval for mixed mobile and
portable RF Exposure conditions, this transmitter must be installed to provide a separation distance of at least 22 mm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no instructions to remove or install the device.
Only the antennas listed with this filing and documented in the test report and user manual can be used with this module. This Grant covers variants WT41A and WT41N.
Class 2 Permissive Change to allow mixed portable and mobile use. |
1 2 3 4 5 6 7 | Output power listed is conducted. Modular Approval for mobile RF Exposure conditions, this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no instructions to remove or install the device.
Only the antennas listed with this filing and documented in the test report and user manual can be used with this module. This Grant covers variants WT41A and WT41N.
Class 2 Permissive Change to allow portable installation of model WT41-A in host Blue-1000 by m2m Germany GmbH. Highest reported SAR value: 1.10 W/kg. |
1 2 3 4 5 6 7 | Output power listed is conducted. Modular Approval for mobile RF Exposure conditions, this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no instructions to remove or install the device.
Only the antennas listed with this filing and documented in the test report and user manual can be used with this module. This Grant covers variants WT41A and WT41N.
Class 2 Permissive Change to allow portable installation of model WT41-A in host Intermec SR61B. Highest reported SAR value: 0.66 W/kg. |
1 2 3 4 5 6 7 | Output power listed is conducted. Modular Approval for mobile RF Exposure conditions, this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no instructions to remove or install the device.
Only the antennas listed with this filing and documented in the test report and user manual can be used with this module. This Grant covers variants WT41A and WT41N |
1 2 3 4 5 6 7 | Is there an equipment authorization waiver associated with this application? | No |
1 2 3 4 5 6 7 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
app
s
|
Test Firm Name and Contact Information
|
1 2 3 4 5 6 7
|
Firm Name |
Element Materials Technology Warwick Ltd
|
1 2 3 4 5 6 7
|
CSA Group Bayern GmbH
|
1 2 3 4 5 6 7
|
EMITECH Atlantique
|
1 2 3 4 5 6 7
|
Name |
S****** B****
|
1 2 3 4 5 6 7
|
T******** W****
|
1 2 3 4 5 6 7
|
M**** L********
|
1 2 3 4 5 6 7
|
E******** C********
|
1 2 3 4 5 6 7
|
Telephone Number |
01695********
|
1 2 3 4 5 6 7
|
49-94********
|
1 2 3 4 5 6 7
|
44014********
|
1 2 3 4 5 6 7
|
33-1-********
|
1 2 3 4 5 6 7
|
Fax Number |
01695********
|
1 2 3 4 5 6 7
|
49-94********
|
1 2 3 4 5 6 7
|
44 (0********
|
1 2 3 4 5 6 7
|
+33-1********
|
1 2 3 4 5 6 7
|
E-mail |
s******@element.com
|
1 2 3 4 5 6 7
|
t******@csagroup.org
|
1 2 3 4 5 6 7
|
m******@element.com
|
1 2 3 4 5 6 7
|
e******@emitech.fr
|
|