app
s
|
Applicant Information
|
|
1 2 3
|
Effective |
2020-08-10
|
1 2 3
|
2020-02-17
|
1 2 3
|
2020-01-27
|
1 2 3
|
Applicant's complete, legal business name |
Getac Technology Corporation
|
1 2 3
|
FCC Registration Number (FRN) |
0018268243
|
1 2 3
|
Physical Address |
5F.,Building A,No.209,Sec.1 Nangang.,Rd.
|
1 2 3
|
Taipei City, N/A
|
1 2 3
|
Taiwan
|
|
app
s
|
TCB Information
|
1 2 3
|
TCB Application Email Address |
T******@TIMCOENGR.COM
|
1 2 3
|
t******@timcoengr.com
|
1 2 3
|
TCB Scope |
B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
|
|
app
s
|
FCC ID
|
1 2 3
|
Grantee Code |
QYL
|
1 2 3
|
Equipment Product Code |
WP7610BC03
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
1 2 3
|
Name |
K****** C******
|
1 2 3
|
Telephone Number |
+886-******** Extension:
|
1 2 3
|
Fax Number |
+886-********
|
1 2 3
|
E-mail |
k******@getac.com.tw
|
|
app
s
|
Technical Contact
|
|
|
n/a |
|
app
s
|
Non Technical Contact
|
|
|
n/a |
|
app
s
|
Confidentiality (long or short term)
|
1 2 3 |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
1 2 3 | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
1 2 3 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 02/06/2021 |
1 2 3 | 08/15/2020 |
1 2 3 | 07/25/2020 |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
1 2 3 |
Is this application for software defined/cognitive radio authorization? | No |
1 2 3 | Equipment Class | PCB - PCS Licensed Transmitter |
1 2 3 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | WWAN Module |
1 2 3 | Module |
1 2 3 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
1 2 3 | Modular Equipment Type | Limited Single Modular Approval |
1 2 3 | Single Modular Approval |
1 2 3 | Purpose / Application is for | Class II Permissive Change |
1 2 3 | Change in Identification |
1 2 3 | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | No |
1 2 3 | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
1 2 3 | Grant Comments | Class II Permissive Change: The modular FCC ID: QYLWP7610BC03 was integrated in specific host, Getac Body Worn Camera, Model: BC-03, and granted on 02/17/2020. Now the module FCC ID: QYLWP7610BC03 remains identical to the original approved. NANO SIM feature will be added on the host device. The highest reported SAR for body-worn accessory and simultaneous transmission exposure conditions are 0.49 W/kg and 0.74 W/kg, respectively.
Output power listed is conducted. Limited Single Modular Approval.
This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna of this transmitter must provide a separation distance of at least 20 cm from all persons. Installers and end-users must be provided with antenna installation instructions and transmitter operating conditions and instructions for satisfying RF exposure compliance.
The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements.
The maximum antenna gain including cable loss for compliance with radiated power limits, RF exposure requirements and the categorical exclusion requirements of 2.1091 is 6dBi. Multi-transmitter, supporting simultaneous transmission, configurations have been evaluated as described in this filling. Other multi-transmitter configurations have not been evaluated and shall be evaluated according to KDB Publication 447498 and §2.947(f), §15.31(h) and §15.31(k) composite system and §2.1 terms and concepts.
The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, emissions and host/module authentication, or new application if appropriate. |
1 2 3 | Class II Permissive Change: Authorizes portable use when integrated into the Getac Body-Worn Camera, Model: BC-03. The highest reported SAR for body-worn accessory and simultaneous transmission exposure conditions are 0.49 W/kg and 0.74 W/kg, respectively.
Output power listed is conducted. Single Modular Approval.
This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna of this transmitter must provide a separation distance of at least 20 cm from all persons. Installers and end-users must be provided with antenna installation instructions and transmitter operating conditions and instructions for satisfying RF exposure compliance.
The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements.
The maximum antenna gain including cable loss for compliance with radiated power limits, RF exposure requirements and the categorical exclusion requirements of 2.1091 is 6dBi. Multi-transmitter, supporting simultaneous transmission, configurations have been evaluated as described in this filling. Other multi-transmitter configurations have not been evaluated and shall be evaluated according to KDB Publication 447498 and §2.947(f), §15.31(h) and §15.31(k) composite system and §2.1 terms and concepts.
The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, emissions and host/module authentication, or new application if appropriate. |
1 2 3 | Output power listed is conducted.
Single Modular Approval.
This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna of this transmitter must provide a separation distance of at least 20 cm from all persons. Installers and end-users must be provided with antenna installation instructions and transmitter operating conditions and instructions for satisfying RF exposure compliance.
The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements.
The maximum antenna gain including cable loss for compliance with radiated power limits, RF exposure requirements and the categorical exclusion requirements of 2.1091 is 6dBi. Multi-transmitter, supporting simultaneous transmission, configurations have been evaluated as described in this filling. Other multi-transmitter configurations have not been evaluated and shall be evaluated according to KDB Publication 447498 and §2.947(f), §15.31(h) and §15.31(k) composite system and §2.1 terms and concepts.
The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, emissions and host/module authentication, or new application if appropriate. |
1 2 3 | Is there an equipment authorization waiver associated with this application? | No |
1 2 3 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
app
s
|
Test Firm Name and Contact Information
|
1 2 3
|
Firm Name |
Sporton International Inc.
|
1 2 3
|
Name |
A******** C****
|
1 2 3
|
Telephone Number |
88633********
|
1 2 3
|
Fax Number |
+886-********
|
1 2 3
|
E-mail |
a******@sporton.com.tw
|
|