app
s
|
Applicant Information
|
|
various
|
Effective |
2022-04-13
|
various
|
2022-02-07
|
various
|
2018-05-29
|
various
|
2018-05-25
|
various
|
2018-02-02
|
various
|
2017-10-03
|
various
|
Applicant's complete, legal business name |
Arcadyan Technology Corporation
|
various
|
FCC Registration Number (FRN) |
0009258708
|
various
|
Physical Address |
No.8, Sec.2, Guangfu Rd.
|
various
|
Hsinchu, N/A
|
various
|
Hsinchu, 30071
|
various
|
Taiwan
|
|
app
s
|
TCB Information
|
various
|
TCB Application Email Address |
t******@timcoengr.com
|
various
|
T******@TIMCOENGR.COM
|
various
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|
app
s
|
FCC ID
|
various
|
Grantee Code |
RAX
|
various
|
Equipment Product Code |
WN9711
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
various
|
Name |
S****** L****
|
various
|
Title |
Manager
|
various
|
Telephone Number |
886-3******** Extension:
|
various
|
Fax Number |
886-3********
|
various
|
E-mail |
s******@arcadyan.com
|
|
app
s
|
Technical Contact
|
|
|
n/a |
|
app
s
|
Non Technical Contact
|
|
|
n/a |
|
app
s
|
Confidentiality (long or short term)
|
various |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No |
various | Yes |
various | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
various |
Is this application for software defined/cognitive radio authorization? | No |
various | Equipment Class | NII - Unlicensed National Information Infrastructure TX |
various | DSS - Part 15 Spread Spectrum Transmitter |
various | DTS - Digital Transmission System |
various | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Wireless LAN Network Module |
various | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | Yes |
various | No |
various | Modular Equipment Type | Single Modular Approval |
various | Purpose / Application is for | Class II Permissive Change |
various | Class II permissive change or modification of presently authorized equipment |
various | Original Equipment |
various | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
various | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
various | Grant Comments | Single Modular Approval. Power listed is combined conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This module is to be used only for mobile and fixed applications, with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this transmitter must not exceed the gain of 4.42 dBi and must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, 40 and 80 MHz bandwidth modes.
Class II Permissive Change: Allowing Dipole for SKU 2. |
various | Power listed is conducted.
Class II Permissive Change: Allowing Dipole for SKU 2. |
various | Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This module is to be used only for mobile and fixed applications, with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this transmitter must not exceed the gain of 3.16 dBi and must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20MHz and 40 MHz bandwidth modes.
Class II Permissive Change: Allowing Dipole for SKU 2. |
various | Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This module is to be used only for mobile and fixed applications, with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this transmitter must not exceed the gain of 3.16 dBi and must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20MHz and 40 MHz bandwidth modes.
Class II Permissive Change: Adding additional (lower gain) antennas. Adding second-source DDR and Flash components to SKU 1. Adding new SKU. |
various | Single Modular Approval. Power listed is combined conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This module is to be used only for mobile and fixed applications, with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this transmitter must not exceed the gain of 4.42 dBi and must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, 40 and 80 MHz bandwidth modes.
Class II Permissive Change: Adding additional (lower gain) antennas. Adding second-source DDR and Flash components to SKU 1. Adding new SKU. |
various | Power listed is conducted.
Class II Permissive Change: Adding additional (lower gain) antennas. Adding second-source DDR and Flash components to SKU 1. Adding new SKU. |
various | Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This module is to be used only for mobile and fixed applications, with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this transmitter must not exceed the gain of 3.16 dBi and must be must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20MHz and 40 MHz bandwidth modes. |
various | Power listed is conducted. |
various | Single Modular Approval. Power listed is combined conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This module is to be used only for mobile and fixed applications, with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this transmitter must not exceed the gain of 4.42 dBi and must be must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, 40 and 80 MHz bandwidth modes. |
various | Is there an equipment authorization waiver associated with this application? | No |
various | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
app
s
|
Test Firm Name and Contact Information
|
various
|
Firm Name |
Sporton International Inc. Hsinchu Laboratory
|
various
|
SPORTON International Inc.
|
various
|
Name |
A**** C****
|
various
|
S**** J****
|
various
|
Telephone Number |
+886-********
|
various
|
886-3******** Extension:
|
various
|
Fax Number |
+886-********
|
various
|
886-3********
|
various
|
E-mail |
a******@sporton.com.tw
|
various
|
s******@sporton.com.tw
|
|