app
s
|
Applicant Information
|
|
various
|
Effective |
2021-09-29
|
various
|
2021-07-27
|
various
|
2021-05-11
|
various
|
2020-09-07
|
various
|
2019-08-06
|
various
|
2019-06-24
|
various
|
2019-02-22
|
various
|
2017-05-19
|
various
|
2016-03-11
|
various
|
2015-02-06
|
various
|
2014-06-23
|
various
|
2014-06-20
|
various
|
2014-06-18
|
various
|
2014-05-30
|
various
|
2014-05-27
|
various
|
2014-04-17
|
various
|
2013-12-30
|
various
|
2013-10-01
|
various
|
Applicant's complete, legal business name |
Sintai Optical (Shenzhen) Co., Ltd.
|
various
|
FCC Registration Number (FRN) |
0026346957
|
various
|
Physical Address |
Qiwei Ind Sec,1st,2nd,&3Rd Bldg,Lisonglang Village Gongming Town,Bao an District
|
various
|
Qiwei Ind Sec,1st,2nd,&3Rd Bldg,Lisonglang Village
|
various
|
Shenzhen,Guangdong,, N/A
|
various
|
China
|
|
app
s
|
TCB Information
|
various
|
TCB Application Email Address |
c******@nacsemc.com
|
various
|
s******@nemko.com
|
various
|
t******@us.bureauveritas.com
|
various
|
c******@curtis-straus.com
|
various
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|
app
s
|
FCC ID
|
various
|
Grantee Code |
SER
|
various
|
Equipment Product Code |
CWFB124
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
various
|
Name |
q******** y****
|
various
|
Telephone Number |
+86-7******** Extension:
|
various
|
Fax Number |
+86-7********
|
various
|
E-mail |
q******@sintai.com
|
|
app
s
|
Technical Contact
|
|
|
n/a |
|
app
s
|
Non Technical Contact
|
|
|
n/a |
|
app
s
|
Confidentiality (long or short term)
|
various |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No |
various | Yes |
various | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No |
various | Yes |
various | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 02/02/2020 |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
various |
Is this application for software defined/cognitive radio authorization? | No |
various | Equipment Class | DTS - Digital Transmission System |
various | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Wi-Fi module |
various | Wi-Fi Module |
various | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
various | Modular Equipment Type | Single Modular Approval |
various | Limited Single Modular Approval |
various | Purpose / Application is for | Class II Permissive Change |
various | Class II permissive change or modification of presently authorized equipment |
various | Original Equipment |
various | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | No |
various | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
various | Grant Comments | Class II Permissive Change for changing the battery charging circuit of mainboard for the host (Brand: KODAK, Model: KODAK PIXPRO AZ528) as described in this filing. The highest reported SAR value for body-worn exposure conditions is 0.32 W/kg. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance.
Power listed is conducted. Single modular approval for mobile RF Exposure conditions. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installations only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
various | Class II Permissive Change to change CPU model for portable host (Digital Camera, Brand name/Model: KODAK/ KODAK PIXPRO AZ652) as described in this filing. The highest reported body SAR value is <0.10 W/kg.
Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
various | Class II Permissive Change for changing the CPU of host (Brand MINOLTA, Model: MINOLTA MN67Z).
Class II Permissive Change for adding one new host (Brand: MINOLTA, Model: MINOLTA MN67Z). The module (FCC ID: SERCWFB124) was evaluated in the final host configuration for portable exposure conditions. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures or as described in this filing. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. The highest reported SAR value for body exposure condition is < 0.10 W/kg.
Power listed is conducted. Single modular approval for mobile RF Exposure conditions. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installations only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
various | Class II Permissive Change for changing DSP component and adding second model of antenna for portable host (Brand: KODAK, Model: KODAK PIXPRO AZ528). This grant is valid only when the module is installed as described in this filing. The highest reported SAR value for body-worn exposure conditions is 0.32 W/kg. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance.
Power listed is conducted. Single modular approval for mobile RF Exposure conditions. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installations only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
various | Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
Class II Permissive Change for adding a portable host (Digital Camera, Brand name/Model: KODAK/KODAK PIXPRO WPZ2 Digital Camera) as described in this filing. The highest reported SAR for head and extremity (hand) exposure conditions are < 0.10 W/kg, and 0.18 W/kg, respectively. |
various | Class II Permissive Change for adding one new host (Brand: MINOLTA, Model: MINOLTA MN67Z). The module (FCC ID: SERCWFB124) was evaluated in the final host configuration for portable exposure conditions. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures or as described in this filing. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. The highest reported SAR value for body exposure condition is < 0.10 W/kg.
Power listed is conducted. Single modular approval for mobile RF Exposure conditions. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installations only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
various | Class II Permissive Change for adding a portable host (Brand: KODAK, Model: KODAK PIXPRO AZ528). This grant is valid only when the module is installed as described in this filing. The highest reported SAR value for body-worn exposure conditions is < 0.10 W/kg. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance.
Power listed is conducted. Single modular approval for mobile RF Exposure conditions. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installations only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end users must be provided with
transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
various | Class II Permissive Change to Limited Modular Approval for portable RF Exposure condition for adding a portable host (Digital Camera, Brand name/Model: KODAK/KODAK PIXPRO AZ652) as described in this filing. The highest reported body SAR value is 0.08 W/kg.
Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
various | Class II Permissive Change for adding a portable host (Digital Camera, Brand name/Model: KODAK/KODAK PIXPRO AZ527) as described in this filing. The highest reported body SAR value is 0.08 W/kg.
Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
various | Class II Permissive Change for adding a portable host (KODAK SMART LENS Camera, Brand name/Model: KODAK/KODAK PIXPRO SL5 SMART LENS Camera) as described in this filing. The highest reported body SAR value is 1.0 W/kg.
Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
various | Class II Permissive Change for adding a portable host (KODAK Camera, MODEL: KODAK PIXPRO AZ525) as described in this filing. The highest reported body SAR value is 0.13 W/kg.
Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
various | Class II Permissive Change for adding a portable host (KODAK Camera, MODEL: KODAK PIXPRO SP360 Action Cam) as described in this filing. The highest reported body SAR value is 1.34 W/kg.
Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
various | Class II Permissive Change for adding a portable host (KODAK Camera, MODEL: KODAK PIXPRO AZ526) as described in this filing. The highest reported body SAR value is < 0.10 W/kg.
Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
various | Class II Permissive Change for adding a portable host as described in this filing. The highest reported body SAR is 0.56 W/kg.
Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
various | Class II Permissive Change for adding a portable host as described in this filing. The highest reported body SAR is 0.14 W/kg.
Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
various | Class II Permissive Change for adding a portable host as described in this filing. The highest reported body SAR is 0.25 W/kg.
Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
various | Class II Permissive Change for adding a portable host as described in this filing. The highest reported body SAR is < 0.10 W/kg.
Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
various | Power listed is conducted. Single modular approval for mobile RF Exposure conditions. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installations only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
various | Is there an equipment authorization waiver associated with this application? | No |
various | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
app
s
|
Test Firm Name and Contact Information
|
various
|
Firm Name |
Bureau Veritas CPS(H.K.) Ltd., Taoyuan Branch
|
various
|
SPORTON International Inc.
|
various
|
Bureau Veritas CPS (H.K.) Ltd., Taoyuan Branch
|
various
|
Name |
E******** L********
|
various
|
A**** C******
|
various
|
R******** C******
|
various
|
K**** L******
|
various
|
Telephone Number |
+886-********
|
various
|
886-3******** Extension:
|
various
|
886-3******** Extension:
|
various
|
886-3******** Extension:
|
various
|
+886-******** Extension:
|
various
|
+886-******** Extension:
|
various
|
Fax Number |
+886-********
|
various
|
886-3********
|
various
|
886-3********
|
various
|
+886-********
|
various
|
+886-********
|
various
|
+886-********
|
various
|
E-mail |
e******@tw.bureauveritas.com
|
various
|
a******@sporton.com.tw
|
various
|
r******@tw.bureauveritas.com
|
various
|
k******@tw.bureauveritas.com
|
|