app
s
|
Applicant Information
|
|
various
|
Effective |
2016-11-16
|
various
|
2016-08-17
|
various
|
2016-06-20
|
various
|
Applicant's complete, legal business name |
ZTE Corporation
|
various
|
FCC Registration Number (FRN) |
0022602015
|
various
|
Physical Address |
ZTE Plaza, Keji Road South
|
various
|
Shenzhen, N/A
|
various
|
China
|
|
app
s
|
TCB Information
|
various
|
TCB Application Email Address |
c******@telefication.com
|
various
|
T******@TIMCOENGR.COM
|
various
|
TCB Scope |
B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
|
various
|
A4: UNII devices & low power transmitters using spread spectrum techniques
|
various
|
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
|
app
s
|
FCC ID
|
various
|
Grantee Code |
SRQ
|
various
|
Equipment Product Code |
A210
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
various
|
Name |
Y****** G********
|
various
|
Title |
Certification Manager
|
various
|
Telephone Number |
+86-2********
|
various
|
Fax Number |
+86-2********
|
various
|
E-mail |
g******@zte.com.cn
|
|
app
s
|
Technical Contact
|
various
|
Firm Name |
Shenzhen BALUN Technology Co., Ltd.
|
various
|
Name |
x****** w******
|
various
|
Physical Address |
Block B, FL 1, Baisha Science and Technology Park
|
various
|
China
|
various
|
Telephone Number |
86-75********
|
various
|
Fax Number |
86-75********
|
various
|
E-mail |
x******@baluntek.com
|
|
app
s
|
Non Technical Contact
|
various
|
Firm Name |
Shenzhen BALUN Technology Co., Ltd.
|
various
|
Name |
T****** Z****
|
various
|
Physical Address |
Block B, FL 1, Baisha Science and Technology Park
|
various
|
China
|
various
|
Telephone Number |
86-75******** Extension:
|
various
|
86-75********
|
various
|
86-75********
|
various
|
Fax Number |
86-75********
|
various
|
E-mail |
y******@baluntek.com
|
|
app
s
|
Confidentiality (long or short term)
|
various |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
various | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
various |
Is this application for software defined/cognitive radio authorization? | No |
various | Equipment Class | PCE - PCS Licensed Transmitter held to ear |
various | DSS - Part 15 Spread Spectrum Transmitter |
various | DTS - Digital Transmission System |
various | JBP - Part 15 Class B Computing Device Peripheral |
various | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | LTE Digital Mobile Handset |
various | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
various | Modular Equipment Type | Does not apply |
various | Purpose / Application is for | Class II permissive change or modification of presently authorized equipment |
various | Original Equipment |
various | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
various | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
various | Grant Comments | Class II change: 1) antenna changes 2) disable the licensed radio bands by the software change. The highest reported SAR values for head, body-worn accessory, product specific (wireless router), and simultaneous transmission use conditions are 0.39 W/kg, 1.03 W/kg, 1.15 W/kg, and 1.50 W/kg, respectively.
Power listed is ERP for part 22, and part 27 below 1 GHz, and EIRP for part 24, and part 27 above 1GHz. For body-worn operation, this phone has been tested and meets the FCC RF exposure guidelines when used with an accessory that contains no metal and that positions the handset a minimum of 1.0cm from the users body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance.
The highest reported SAR values for head, body-worn accessory, product specific wireless router), and simultaneous transmission conditions are 0.34 W/kg, 0.66 W/kg, 0.75 W/kg, and 1.10 W/kg respectively.
This device contains functions that are not operational in U.S. Territories. This filing is only applicable for U.S. operations. This device supports:
LTE of 1.4, 3, 5, 10, 15 and 20 MHz bandwidth modes for LTE Band 2 and 4; LTE of 5, 10, 15 and 20 MHz bandwidth modes for LTE Band 7. |
various | Class II change: 1) Adapter changes.
Power listed is conducted. |
various | Class II change: The adapter changes. The highest reported SAR values for simultaneous transmission use conditions is 1.50 W/kg, respectively.
Power listed is conducted. For body-worn operation, this phone has been tested and meets the FCC RF exposure guidelines when used with an accessory that contains no metal and that positions the handset a minimum of 1.0 cm from the users body.
End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance.
The highest reported SAR values for head, body-worn accessory, product specific (wireless router), and simultaneous transmission conditions are 0.39 W/kg, 0.34, 0.44 W/kg, and 1.31 W/kg respectively.
This device has 20 and 40 MHz bandwidth modes. |
various | Class II change: The adapter changes. |
various | Class II Permissive Change : This change is to (a) Remove one SIM card Slot, (b) Disable LTE band 2, 7, 12, 17.
Power listed is conducted. For body-worn operation, this phone has been tested and meets the FCC RF exposure guidelines when used with an accessory that contains no metal and that positions the handset a minimum of 1.0cm from the users body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values for head, body-worn accessory, product specific (wireless router), and simultaneous transmission conditions are 0.39W/kg, 034, 0.44W/kg, and 1.31W/kg respectively. This device has 20 and 40 MHz bandwidth modes. |
various | Class II Permissive Change : This change is to (a) Remove one SIM card Slot, (b) Disable LTE band 2, 7, 12, 17.
Power listed is ERP for part 22, and part 27 below 1 GHz, and EIRP for part 24, and part 27 above 1GHz. For body-worn operation, this phone has been tested and meets the FCC RF exposure guidelines when used with an accessory that contains no metal and that positions the handset a minimum of 1.0cm from the users body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values for head, body-worn accessory, product specific (wireless router), and simultaneous transmission conditions are 0.34W/kg, 0.66W/kg, 0.75W/kg, and 1.10W/kg respectively. This device contains functions that are not operational in U.S. Territories. This filing is only applicable for U.S. operations. This device supports: LTE of 1.4, 3, 5, 10, 15 and 20 MHz bandwidth modes for LTE Band 2 and 4; LTE of 5, 10, 15 and 20 MHz bandwidth modes for LTE Band 7; LTE of 1.4, 3, 5, and 10 MHz bandwidth modes for LTE Band 12; LTE of 5 and 10 MHz bandwidth modes for LTE Band 17; and LTE of3, 5, 10, 15 and 20 MHz bandwidth modes for LTE Band 28. |
various | Power listed is conducted. For body-worn operation, this phone has been tested and meets the FCC RF exposure guidelines when used with an accessory that contains no metal and that positions the handset a minimum of 1.0cm from the users body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values for head, body-worn accessory, product specific (wireless router), and simultaneous transmission conditions are 0.32W/kg, 0.32W/kg, 0.35W/kg, and 1.10W/kg respectively. This device has 20 and 40 MHz bandwidth modes. |
various | Power listed is ERP for part 22, and part 27 below 1 GHz, and EIRP for part 24, and part 27 above 1GHz. For body-worn operation, this phone has been tested and meets the FCC RF exposure guidelines when used with an accessory that contains no metal and that positions the handset a minimum of 1.0cm from the users body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values for head, body-worn accessory, product specific (wireless router), and simultaneous transmission conditions are 0.34W/kg, 0.66W/kg, 0.75W/kg, and 1.10W/kg respectively. This device contains functions that are not operational in U.S. Territories. This filing is only applicable for U.S. operations. This device supports: LTE of 1.4, 3, 5, 10, 15 and 20 MHz bandwidth modes for LTE Band 2 and 4; LTE of 5, 10, 15 and 20 MHz bandwidth modes for LTE Band 7; LTE of 1.4, 3, 5, and 10 MHz bandwidth modes for LTE Band 12; LTE of 5 and 10 MHz bandwidth modes for LTE Band 17; and LTE of3, 5, 10, 15 and 20 MHz bandwidth modes for LTE Band 28. |
various | Power listed is conducted. |
various | Is there an equipment authorization waiver associated with this application? | No |
various | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
app
s
|
Test Firm Name and Contact Information
|
various
|
Firm Name |
Shenzhen BALUN Technology Co.,Ltd.
|
various
|
Name |
X******** W******
|
various
|
Telephone Number |
86-75********
|
various
|
Fax Number |
86-75********
|
various
|
E-mail |
x******@baluntek.com
|
|