app
s
|
Applicant Information
|
|
1 2 3 4 5 6 7
|
Effective |
2014-11-07
|
1 2 3 4 5 6 7
|
2014-06-25
|
1 2 3 4 5 6 7
|
2014-01-22
|
1 2 3 4 5 6 7
|
2013-04-24
|
1 2 3 4 5 6 7
|
2012-10-05
|
1 2 3 4 5 6 7
|
2012-05-25
|
1 2 3 4 5 6 7
|
2012-04-26
|
1 2 3 4 5 6 7
|
Applicant's complete, legal business name |
Realtek Semiconductor Corp.
|
1 2 3 4 5 6 7
|
FCC Registration Number (FRN) |
0020109807
|
1 2 3 4 5 6 7
|
Physical Address |
No. 2 Innovation Road II, Hsinchu Science Park
|
1 2 3 4 5 6 7
|
No. 2
|
1 2 3 4 5 6 7
|
Hsinchu
|
1 2 3 4 5 6 7
|
Taiwan
|
|
app
s
|
TCB Information
|
1 2 3 4 5 6 7
|
TCB Application Email Address |
T******@TIMCOENGR.COM
|
1 2 3 4 5 6 7
|
B******@phoenix-testlab.de
|
1 2 3 4 5 6 7
|
D******@phoenix-testlab.de
|
1 2 3 4 5 6 7
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|
app
s
|
FCC ID
|
1 2 3 4 5 6 7
|
Grantee Code |
TX2
|
1 2 3 4 5 6 7
|
Equipment Product Code |
RTL8188EE
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
1 2 3 4 5 6 7
|
Name |
D******** L****
|
1 2 3 4 5 6 7
|
Title |
Project Manager
|
1 2 3 4 5 6 7
|
Telephone Number |
886-3******** Extension:
|
1 2 3 4 5 6 7
|
Fax Number |
886-3********
|
1 2 3 4 5 6 7
|
E-mail |
d******@realtek.com
|
|
app
s
|
Technical Contact
|
|
|
n/a |
|
app
s
|
Non Technical Contact
|
|
|
n/a |
|
app
s
|
Confidentiality (long or short term)
|
1 2 3 4 5 6 7 |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
1 2 3 4 5 6 7 | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
1 2 3 4 5 6 7 | No |
1 2 3 4 5 6 7 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 05/03/2015 |
1 2 3 4 5 6 7 | 12/21/2014 |
1 2 3 4 5 6 7 | 07/20/2014 |
1 2 3 4 5 6 7 | 06/16/2013 |
1 2 3 4 5 6 7 | 11/18/2012 |
1 2 3 4 5 6 7 | 10/22/2012 |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
1 2 3 4 5 6 7 |
Is this application for software defined/cognitive radio authorization? | No |
1 2 3 4 5 6 7 | Equipment Class | DTS - Digital Transmission System |
1 2 3 4 5 6 7 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | 802.11b/g/n RTL8188EE NGFFCard |
1 2 3 4 5 6 7 | 802.11b/g/n RTL8188EE NGFFCARD |
1 2 3 4 5 6 7 | 802.11 b/g/n RTL8188EE MINICARD |
1 2 3 4 5 6 7 | 802.11bgn RTL8188EE miniCard |
1 2 3 4 5 6 7 | 802.11bgn RTL8188EE mini card |
1 2 3 4 5 6 7 | 802.11bgn RTL8188 miniCard |
1 2 3 4 5 6 7 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
1 2 3 4 5 6 7 | Modular Equipment Type | Single Modular Approval |
1 2 3 4 5 6 7 | Limited Single Modular Approval |
1 2 3 4 5 6 7 | Purpose / Application is for | Class II Permissive Change |
1 2 3 4 5 6 7 | Original Equipment |
1 2 3 4 5 6 7 | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | No |
1 2 3 4 5 6 7 | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
1 2 3 4 5 6 7 | Grant Comments | Output Power listed is the maximum conducted peak output power as indicated in the filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. When operating in 802.11n, 40 MHz mode, the operating frequency segment is limited to 2422 to 2452 MHz. This OEM module is approved for use in products operating as mobile transmitting device. The antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. (Original Grant Date: 04/26/2012, Revised on 11/07/2014)
Class II Permissive Change: This Class II permissive Change adds a new layout for antenna ports. |
1 2 3 4 5 6 7 | Output Power listed is the maximum combined conducted peak output power as indicated in the filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Device is operating in a 1T2R Spatial Multiplexing MIMO configuration as described in this filing. When operating in 802.11n, 40 MHz mode, the operating frequency segment is limited to 2422 to 2452 MHz. This OEM module is approved for use in products operating as mobile transmitting device. The antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. (Date of Grant: 04/25/2012)
Class II Permissive Change: This Class II permissive Change is to add 3 NGFF main source type configurations to the device. |
1 2 3 4 5 6 7 | Output Power listed is the maximum combined conducted peak output power as indicated in the filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Device is operating in a 1T2R Spatial Multiplexing MIMO configuration as described in this filing. When operating in 802.11n, 40 MHz mode, the operating frequency segment is limited to 2422 to 2452 MHz. This OEM module is approved for use in products operating as mobile transmitting device. The antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. (Date of Grant: 04/26/2012)
Class II Permissive Change: This Class II Permissive Change is to integrate this module into the Hewlett-Packard Tablet PC, Model: TPN-C115. The highest reported SAR value is 0.77W/kg. |
1 2 3 4 5 6 7 | Output Power listed is the maximum combined conducted peak output power as indicated in the filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Device is operating in a 1T2R Spatial Multiplexing MIMO configuration as described in this filing. When operating in 802.11n, 40 MHz mode, the operating frequency segment is limited to 2422 to 2452 MHz. This OEM module is approved for use in products operating as mobile transmitting device. The antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.
This Class II Permissive Change adds the installation of this RF Module by end-users into the lenovo ThinkPad Edge E145, E445 and E545 via 2-way BIOS lock function as documented in the filing. This device must use a BIOS lock mechanism which ensures that it only operates with the hosts as
specified in the Certification filing.
In addition six PIFA antennas (same type with lower gain than already certified) added. |
1 2 3 4 5 6 7 | Class II change adds modifications as documented in the filing.
Output Power listed is the maximum combined conducted peak output power as indicated in the filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Device is operating in a 1T2R Spatial Multiplexing MIMO configuration as described in this filing. When operating in 802.11n, 40 MHz mode, the operating frequency segment is limited to 2422 to 2452 MHz. This OEM module is approved for use in products operating as mobile transmitting device. The antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
1 2 3 4 5 6 7 | Class II Permissive Change adds host independent portable module configurations as Laptop/Notebook/Netbook and Tablet Computer with minimum separation distance by built-in mechanism of at least 1.6 cm between radiating structures and the user. Highest Body SAR value: 0.355 W/kg.
Output Power listed is the maximum combined conducted peak output power as indicated in the filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Device is operating in a 1T2R Spatial Multiplexing MIMO configuration as described in this filing. When operating in 802.11n, 40 MHz mode, the operating frequency segment is limited to 2422 to 2452 MHz. This OEM module is approved for use in products operating as mobile transmitting device. The antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
1 2 3 4 5 6 7 | Output Power listed is the maximum combined conducted peak output power as indicated in the filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Device is operating in a 1T2R Spatial Multiplexing MIMO configuration as described in this filing. When operating in 802.11n, 40 MHz mode, the operating frequency segment is limited to 2422 to 2452 MHz. This OEM module is approved for use in products operating as mobile transmitting device. The antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
1 2 3 4 5 6 7 | Is there an equipment authorization waiver associated with this application? | No |
1 2 3 4 5 6 7 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
app
s
|
Test Firm Name and Contact Information
|
1 2 3 4 5 6 7
|
Firm Name |
Sporton International Inc.
|
1 2 3 4 5 6 7
|
Name |
A******** C****
|
1 2 3 4 5 6 7
|
Telephone Number |
886-3******** Extension:
|
1 2 3 4 5 6 7
|
Fax Number |
886-3********
|
1 2 3 4 5 6 7
|
E-mail |
a******@sporton.com.tw
|
|