app
s
|
Applicant Information
|
|
various
|
Effective |
2016-02-05
|
various
|
2016-01-28
|
various
|
2015-10-23
|
various
|
2015-09-09
|
various
|
2015-09-01
|
various
|
2015-07-13
|
various
|
2015-06-15
|
various
|
2015-04-17
|
various
|
2015-04-06
|
various
|
2015-03-16
|
various
|
2015-02-12
|
various
|
2015-02-11
|
various
|
2015-02-03
|
various
|
2015-01-30
|
various
|
2015-01-29
|
various
|
2014-10-30
|
various
|
2014-09-29
|
various
|
2014-07-31
|
various
|
2014-07-14
|
various
|
2014-05-26
|
various
|
2014-05-23
|
various
|
2014-04-02
|
various
|
2014-01-24
|
various
|
2014-01-06
|
various
|
2013-12-24
|
various
|
2013-12-18
|
various
|
2013-06-13
|
various
|
2013-06-06
|
various
|
2013-05-08
|
various
|
Applicant's complete, legal business name |
Realtek Semiconductor Corp.
|
various
|
FCC Registration Number (FRN) |
0020109807
|
various
|
Physical Address |
No. 2 Innovation Road II, Hsinchu Science Park
|
various
|
No. 2
|
various
|
Hsinchu, N/A
|
various
|
Taiwan
|
|
app
s
|
TCB Information
|
various
|
TCB Application Email Address |
T******@TIMCOENGR.COM
|
various
|
c******@telefication.com
|
various
|
L******@ul.com
|
various
|
t******@timcoengr.com
|
various
|
t******@babt.com
|
various
|
t******@siemic.com
|
various
|
B******@phoenix-testlab.de
|
various
|
B******@pheonix-testlab.de
|
various
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|
app
s
|
FCC ID
|
various
|
Grantee Code |
TX2
|
various
|
Equipment Product Code |
RTL8723BE
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
various
|
Name |
D****** L******
|
various
|
Title |
Project Manager
|
various
|
Telephone Number |
886-3******** Extension:
|
various
|
Fax Number |
886-3********
|
various
|
E-mail |
d******@realtek.com
|
|
app
s
|
Technical Contact
|
various
|
Firm Name |
SGS Taiwan Ltd.
|
various
|
Cerpass Technology Corporation
|
various
|
Name |
W**** C****
|
various
|
M******** C****
|
various
|
Physical Address |
134, Wu Kung Rd., Wuku Industrial Zone
|
various
|
No.66,Tangzhuang Road
|
various
|
Taiwan
|
various
|
China
|
various
|
Telephone Number |
86222********
|
various
|
86-51********
|
various
|
86-51********
|
various
|
Fax Number |
88622********
|
various
|
86-51********
|
various
|
E-mail |
w******@sgs.com
|
various
|
m******@cerpass.net
|
|
app
s
|
Non Technical Contact
|
various
|
Firm Name |
SGS Taiwan Ltd.
|
various
|
Cerpass Technology Corporation
|
various
|
Name |
W******** C******
|
various
|
M**** C********
|
various
|
Physical Address |
134, Wu Kung Rd., Wuku Industrial Zone
|
various
|
No.66,Tangzhuang Road
|
various
|
Taiwan
|
various
|
China
|
various
|
Telephone Number |
86222********
|
various
|
86-51********
|
various
|
86-51********
|
various
|
Fax Number |
88622********
|
various
|
86-51********
|
various
|
E-mail |
w******@sgs.com
|
various
|
m******@cerpass.net
|
|
app
s
|
Confidentiality (long or short term)
|
various |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
various | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
various | No |
various | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 08/03/2016 |
various | 04/19/2016 |
various | 03/07/2016 |
various | 02/29/2016 |
various | 02/28/2016 |
various | 01/06/2016 |
various | 07/09/2015 |
various | 10/13/2015 |
various | 10/03/2015 |
various | 09/09/2015 |
various | 08/10/2015 |
various | 08/09/2015 |
various | 08/01/2015 |
various | 07/28/2015 |
various | 07/27/2015 |
various | 04/27/2015 |
various | 03/25/2015 |
various | 01/27/2015 |
various | 01/07/2015 |
various | 11/19/2014 |
various | 09/28/2014 |
various | 07/22/2014 |
various | 07/05/2014 |
various | 06/15/2014 |
various | 07/28/2013 |
various | 12/03/2013 |
various | 11/04/2013 |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
various |
Is this application for software defined/cognitive radio authorization? | No |
various | Equipment Class | DTS - Digital Transmission System |
various | DSS - Part 15 Spread Spectrum Transmitter |
various | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | 802.11 b/g/n+BT RTL8723BE |
various | 802.11 b/g/n RTL8723BE Combo module |
various | 802.11b/g/n+BT RTL8723BE |
various | 802.11 b/g/n BT RTL8723BE Combo module |
various | 802.11b/g/n RTL8723BE Combo module |
various | 802.11 b/g/n RTL8723BE |
various | 802.11b/g/n RTL8723BE Combo Module |
various | 802.11b/g/n RTL8723BE Combo Module |
various | 802.11b/g/n RTL8723BE COMBO MODULE |
various | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
various | Modular Equipment Type | Limited Single Modular Approval |
various | Single Modular Approval |
various | Does not apply |
various | Purpose / Application is for | Class II Permissive Change |
various | Original Equipment |
various | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
various | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
various | Yes |
various | Grant Comments | Limited Single Modular Approval. Output Power listed is the maximum combined conducted output power as indicated in the filing. The antenna(s) used for this transmitter must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. When operating in 802.11n, 40 MHz mode, the operating frequency segment is limited to 2422 to 2452 MHz. This OEM module is approved for use in products operating as mobile transmitting device. The antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. (Date of Grant: 05/08/2013)
Class II Permissive Change: This Class II Permissive Change is to integrate this module in the HP Notebook PC, Model: TPN-W118.The highest reported SAR values for stand-alone and simultaneous transmission conditions are 0.29 W/kg and 0.42 W/kg, respectively. |
various | Limited Single Modular Approval. Output Power listed is the maximum combined conducted output power as indicated in the filing. The antenna(s) used for this transmitter must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. This OEM module is approved for use in products operating as mobile transmitting device. The antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. (Date of Grant: 05/08/2013)
Class II Permissive Change: This Class II Permissive Change is to integrate this module in the HP Notebook PC, Model: TPN-W118. |
various | Class II Permissive Change : This Change is to install this module into a host : Notebook PC(Model number : TPN-W117) with the same type of PIFA antenna.
The highest reported SAR values for body, and simultaneous transmission use conditions are 0.27 W/kg, and 0.29 W/kg, respectively.
Output Power listed is the maximum combined conducted output power as indicated in the filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. When operating in 802.11n, 40 MHz mode, the operating frequency segment is limited to 2422 to 2452 MHz. This OEM module is approved for use in products operating as mobile transmitting device. The antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.(Date of Grant: 05/08/2013)
CLASS II PERMISSIVE CHANGE: This Class II Permissive Change is to utilize a USB interface, and a change in the antenna connector location. |
various | Class II Permissive Change : This Change is to install this module into a host : Notebook PC(Model number : TPN-W117) with the same type of PIFA antenna.
The highest reported SAR value for simultaneous transmission use condition is 0.29 W/kg.
Output Power listed is the maximum combined conducted output power as indicated in the filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. When operating in 802.11n, 40 MHz mode, the operating frequency segment is limited to 2422 to 2452 MHz. This OEM module is approved for use in products operating as mobile transmitting device. The antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.(Date of Grant: 05/08/2013).
CLASS II PERMISSIVE CHANGE: This Class II Permissive Change is to utilize a USB interface, and a change in the antenna connector location. |
various | Output Power listed is the maximum combined conducted output power as indicated in the filing. The antenna(s) used for this transmitter must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. This OEM module is approved for use in products operating as mobile transmitting device. The antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. (Date of Grant: 05/08/2013)
Class II Permissive Change: This Class II Permissive Change is to integrate this module in to hp Tablet PC, Model: TPN-Q169. The highest reported SAR for stand-alone and simultaneous transmission exposure conditions are <0.10 W/kg and 0.71 W/kg, respectively. |
various | Output Power listed is the maximum combined conducted output power as indicated in the filing. The antenna(s) used for this transmitter must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. When operating in 802.11n, 40 MHz mode, the operating frequency segment is limited to 2422 to 2452 MHz. This OEM module is approved for use in products operating as mobile transmitting device. The antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. (Date of Grant: 05/08/2013)
Class II Permissive Change: This Class II Permissive Change is to integrate this module in to hp Tablet PC, Model: TPN-Q169. The highest reported SAR for stand-alone and simultaneous transmission exposure conditions are 0.70 W/kg and 0.71 W/kg, respectively. |
various | Class II permissive change to add the specific portable host (Dell, P55F Portable Computer) with antennas described in this filing. SAR compliance for portable use conditions has been evaluated as described in this filing. The highest reported body SAR and simultaneous transmission exposure conditions value under this filing is 0.86 W/Kg and 0.89 W/Kg. Output Power listed is the maximum combined conducted output power as indicated in the filing. The antenna(s) used for this transmitter must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. When operating in 802.11n, 40 MHz mode, the operating frequency segment is limited to 2422 to 2452 MHz. This OEM module is approved for use in products operating as mobile transmitting device. The antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. (Date of Grant: 05/08/2013) |
various | Class II permissive change to add the specific portable host (Dell, P57G Portable Computer) with antennas described in this filing. SAR compliance for portable use conditions has been evaluated as described in this filing. Output Power listed is the maximum combined conducted output power as indicated in the filing. The antenna(s) used for this transmitter must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. When operating in 802.11n, 40 MHz mode, the operating frequency segment is limited to 2422 to 2452 MHz. This OEM module is approved for use in products operating as mobile transmitting device. The antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. (Date of Grant: 12/18/2013) |
various | Class II permissive change to add the specific portable host (Dell, P55F Portable Computer) with antennas described in this filing. SAR compliance for portable use conditions has been evaluated as described in this filing. Output Power listed is the maximum combined conducted output power as indicated in the filing. The antenna(s) used for this transmitter must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. When operating in 802.11n, 40 MHz mode, the operating frequency segment is limited to 2422 to 2452 MHz. This OEM module is approved for use in products operating as mobile transmitting device. The antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. (Date of Grant: 05/08/2013) |
various | Class II permissive change to add the specific portable host (Dell, P57G Portable Computer) with antennas described in this filing. SAR compliance for portable use conditions has been evaluated as described in this filing. The highest reported body SAR and simultaneous transmission exposure conditions value under this filing is 0.70 W/Kg and 0.79 W/Kg. Output Power listed is the maximum combined conducted output power as indicated in the filing. The antenna(s) used for this transmitter must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. When operating in 802.11n, 40 MHz mode, the operating frequency segment is limited to 2422 to 2452 MHz. This OEM module is approved for use in products operating as mobile transmitting device. The antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. (Date of Grant: 12/18/2013) |
various | Class II permissive change to add the specific portable host (Lenovo Flex 3-1130) and antenna as described in this filing. The highest reported SAR value of this filing is 0.20 W/Kg.
Output Power listed is the maximum combined conducted output power as indicated in the filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated with any other transmitters except in accordance with FCC multi-transmitter product procedures. When operating in 802.11n, 40 MHz mode, the operating frequency segment is limited to 2422 to 2452 MHz. This OEM module is approved for use in products operating as mobile transmitting device. The antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
various | Class II permissive change to add the specific portable host (Lenovo Flex 3-1130) and antenna as described in this filing.
Output Power listed is the maximum combined conducted output power as indicated in the filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated with any other transmitters except in accordance with FCC multi-transmitter product procedures. This OEM module is approved for use in products operating as mobile transmitting device. The antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
various | Output Power listed is the maximum conducted output power. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. This OEM module is approved for use in products operating as mobile transmitting device. The antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to
(Original grant date 5/8/2013)
Limited single modular approval. This Class II permissive change is to integrate this module in hp Notebook Convertible, Model: TPN-W112. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. |
various | Output Power listed is the maximum combined conducted output power as indicated in the filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. When operating in 802.11n, 40 MHz mode, the operating frequency segment is limited to 2422 to 2452 MHz. This OEM module is approved for use in products operating as mobile transmitting device. The antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.
(Original grant date 5/8/2013)
Limited single modular approval. This Class II permissive change is to integrate this module in hp Notebook Convertible, Model: TPN-W112. SAR compliance for portable use conditions has been evaluated as described in this filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. The highest reported SAR is 0.23W/kg. |
various | Class II permissive change to add the specific portable host (Dell, P20T Portable Computer) with antennas described in this filing. SAR compliance for portable use conditions has been evaluated as described in this filing. The highest reported SAR value under this filing is 0.78 W/Kg.
Output Power listed is the maximum combined conducted output power as indicated in the filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. When operating in 802.11n, 40 MHz mode, the operating frequency segment is limited to 2422 to 2452 MHz. This OEM module is approved for use in products operating as mobile transmitting device. The antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. (Date of Grant: 05/08/2013) CLASS II PERMISSIVE CHANGE: This Class II Permissive Change is to utilize a USB interface, and a change in the antenna connector location. |
various | Class II permissive change to add the specific portable host (Dell, P20T Portable Computer) with antennas described in this filing. SAR compliance for portable use conditions has been evaluated as described in this filing.
Output Power listed is the maximum combined conducted output power as indicated in the filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. When operating in 802.11n, 40 MHz mode, the operating frequency segment is limited to 2422 to 2452 MHz. This OEM module is approved for use in products operating as mobile transmitting device. The antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. (Date of Grant: 05/08/2013) CLASS II PERMISSIVE CHANGE: This Class II Permissive Change is to utilize a USB interface, and a change in the antenna connector location. |
various | Limited Single Modular Approval. Output Power listed is the maximum combined conducted output power as indicated in the filing. The antenna(s) used for this transmitter must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. The antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. (Date of Grant: 05/08/2013) CLASS II PERMISSIVE CHANGE: This Class II Permissive Change is to utilize a USB interface, and a change in the antenna connector location. (Date of Grant: 12/18/2013)
Class II Permissive Change: This Class II Permissive Change is to integrate this module into host Hewlett-Packard Company Notebook PC, Model: TPN-C123. |
various | Limited Single Modular Approval. Output Power listed is the maximum combined conducted output power as indicated in the filing. The antenna(s) used for this transmitter must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. When operating in 802.11n, 40 MHz mode, the operating frequency segment is limited to 2422 to 2452 MHz. The antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. (Date of Grant: 05/08/2013) CLASS II PERMISSIVE CHANGE: This Class II Permissive Change is to utilize a USB interface, and a change in the antenna connector location. (Date of Grant: 12/18/2013)
Class II Permissive Change: This Class II Permissive Change is to integrate this module into host Hewlett-Packard Company Notebook PC, Model: TPN-C123. The highest reported SAR value is 0.20W/kg. |
various | This Class II Permissive Change is to integrate this module into lenovo Notebook, Model: Flex 3-1120. SAR compliance for portable use conditions has been evaluated as described in this filing.
Output Power listed is the maximum combined conducted output power as indicated in the filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. When operating in 802.11n, 40 MHz mode, the operating frequency segment is limited to 2422 to 2452 MHz. This OEM module is approved for use in products operating as mobile transmitting device. The antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. (Original grant date 5/8/2013). The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. The highest reported SAR for body and simultaneous transmission conditions are 0.47W/kg and 0.47 W/kg respectively. |
various | This Class II Permissive Change is to integrate this module into lenovo Notebook, Model: Flex 3-1120. SAR compliance for portable use conditions has been evaluated as described in this filing.
Output Power listed is the maximum combined conducted output power as indicated in the filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. This OEM module is approved for use in products operating as mobile transmitting device. The antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. (Original grant date 5/8/2013). The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. |
various | Output Power listed is the maximum combined conducted output power as indicated in the filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. When operating in 802.11n, 40 MHz mode, the operating frequency segment is limited to 2422 to 2452 MHz. This OEM module is approved for use in products operating as mobile transmitting device. The antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. (Date of Grant: 05/08/2013)
Class II Permissive Change: This Class II Permissive Change is for adding one connector of original certified NGFF type device, and adding same type of PIFA antenna with lower gain than the original certificate, and the total antennas amounted to 488 sets. |
various | Output Power listed is the maximum combined conducted output power as indicated in the filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. This OEM module is approved for use in products operating as mobile transmitting device. The antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. (Date of Grant: 05/08/2013)
Class II Permissive Change: This Class II Permissive Change is for adding one connector of original certified NGFF type device, and adding same type of PIFA antenna with lower gain than the original certificate, and the total antennas amounted to 488 sets. |
various | Output Power listed is the maximum conducted output power. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. This OEM module is approved for use in products operating as mobile transmitting device. The antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to
(Original grant date 5/8/2013)
Limited single modular approval. This Class II Permissive Change is to integrate this module into hp Notebook PC, Model: HSTNN-W04C. SAR compliance for portable use conditions has been evaluated as described in this filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures or as evaluated in this filing with module FCCID B94HNHWWR. |
various | Output Power listed is the maximum combined conducted output power as indicated in the filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. When operating in 802.11n, 40 MHz mode, the operating frequency segment is limited to 2422 to 2452 MHz. This OEM module is approved for use in products operating as mobile transmitting device. The antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.
(Original grant date 5/8/2013)
Limited single modular approval. This Class II Permissive Change is to integrate this module into hp Notebook PC, Model: HSTNN-W04C. SAR compliance for portable use conditions has been evaluated as described in this filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures or as evaluated in this filing with module FCCID B94HNHWWR. The highest reported SAR is 0.45W/kg. |
various | Output Power listed is the maximum conducted output power. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. This OEM module is approved for use in products operating as mobile transmitting device. The antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to
(Original grant date 5/8/2013)
Limited single modular approval. This Class II Permissive Change is to integrate this module into lenovo Notebook, Model: TP00066B. SAR compliance for portable use conditions has been evaluated as described in this filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. |
various | Output Power listed is the maximum combined conducted output power as indicated in the filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. When operating in 802.11n, 40 MHz mode, the operating frequency segment is limited to 2422 to 2452 MHz. This OEM module is approved for use in products operating as mobile transmitting device. The antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.
(Original grant date 5/8/2013)
Limited single modular approval. This Class II Permissive Change is to integrate this module into lenovo Notebook, Model: TP00066B. SAR compliance for portable use conditions has been evaluated as described in this filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. The highest reported SAR is 0.28W/kg. |
various | Output Power listed is the maximum combined conducted output power as indicated in the filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. When operating in 802.11n, 40 MHz mode, the operating frequency segment is limited to 2422 to 2452 MHz. This OEM module is approved for use in products operating as mobile transmitting device. The antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.
(Original grant date 5/8/2013)
Limited single modular approval. This Class II Permissive Change is to integrate this module into hp Notebook Convertible, Model: TPN-W114. SAR compliance for portable use conditions has been evaluated as described in this filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. The highest reported SAR is 0.48W/kg. |
various | Output Power listed is the maximum conducted output power. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. This OEM module is approved for use in products operating as mobile transmitting device. The antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to
(Original grant date 5/8/2013)
Limited single modular approval. This Class II Permissive Change is to integrate this module into hp Notebook Convertible, Model: TPN-W114. SAR compliance for portable use conditions has been evaluated as described in this filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. |
various | Output Power listed is the maximum combined conducted output power as indicated in the filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. When operating in 802.11n, 40 MHz mode, the operating frequency segment is limited to 2422 to 2452 MHz. This OEM module is approved for use in products operating as mobile transmitting device. The antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.
(Original grant date 5/8/2013)
Limited single modular approval. This Class II Permissive Change is to integrate this module into hp Notebook Convertible, Model: TPN-W112. SAR compliance for portable use conditions has been evaluated as described in this filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. The highest reported SAR is 0.56W/kg. |
various | Output Power listed is the maximum conducted output power. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. This OEM module is approved for use in products operating as mobile transmitting device. The antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to
(Original grant date 5/8/2013)
Limited single modular approval. This Class II Permissive Change is to integrate this module into hp Notebook Convertible, Model: TPN-W112. SAR compliance for portable use conditions has been evaluated as described in this filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. |
various | Output Power listed is the maximum conducted output power. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. This OEM module is approved for use in products operating as mobile transmitting device. The antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to
(Original grant date 5/8/2013)
Limited single modular approval. This Class II Permissive Change is to integrate this module into hp Notebook Convertible, Model: TPN-W113. SAR compliance for portable use conditions has been evaluated as described in this filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. |
various | Output Power listed is the maximum combined conducted output power as indicated in the filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. When operating in 802.11n, 40 MHz mode, the operating frequency segment is limited to 2422 to 2452 MHz. This OEM module is approved for use in products operating as mobile transmitting device. The antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.
(Original grant date 5/8/2013)
Limited single modular approval. This Class II Permissive Change is to integrate this module into hp Notebook Convertible, Model: TPN-W113. SAR compliance for portable use conditions has been evaluated as described in this filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. The highest reported SAR is 0.36W/kg. |
various | Output Power listed is the maximum combined conducted output power as indicated in the filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. This OEM module is approved for use in products operating as mobile transmitting device. The antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to
(Original grant date 5/8/2013)
Limited single modular approval. This Class II Permissive Change is to integrate this module into hp Notebook PC, Model: TPN-C115. SAR compliance for portable use conditions has been evaluated as described in this filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. |
various | Output Power listed is the maximum combined conducted output power as indicated in the filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. When operating in 802.11n, 40 MHz mode, the operating frequency segment is limited to 2422 to 2452 MHz. This OEM module is approved for use in products operating as mobile transmitting device. The antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.
(Original grant date 5/8/2013)
Limited single modular approval. This Class II Permissive Change is to integrate this module into hp Notebook PC, Model: TPN-C115. SAR compliance for portable use conditions has been evaluated as described in this filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. The highest reported SAR is 0.40W/kg. |
various | Output Power listed is the maximum combined conducted output power as indicated in the filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. When operating in 802.11n, 40 MHz mode, the operating frequency segment is limited to 2422 to 2452 MHz. This OEM module is approved for use in products operating as mobile transmitting device. The antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.
(Original grant date 5/8/2013)
Limited single modular approval. This Class II Permissive Change is to integrate this module into hp Notebook PC, Model: TPN-C115. SAR compliance for portable use conditions has been evaluated as described in this filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. The highest reported SAR is 0.29W/kg. |
various | Output Power listed is the maximum combined conducted output power as indicated in the filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. When operating in 802.11n, 40 MHz mode, the operating frequency segment is limited to 2422 to 2452 MHz. This OEM module is approved for use in products operating as mobile transmitting device. The antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.
C2PC. This device and associated FCC ID label are to be installed in the specific Notebook Computer with model number: Lenovo Edge 15 shown in this filing only by OEM or OEM integrators user installation is prohibited. Instructions on the installation and/or removal of this module may not be provided to the end user. Only the antenna(s) documented in this filing, installed in the manner specified, can be used with this device. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with operating instructions for satisfying RF exposure compliance requirements.
The highest reported SAR for body-worn and simultaneous transmission exposure conditions are 0.539 W/kg and 0.966 W/kg respectively |
various | Output Power listed is the maximum combined conducted output power as indicated in the filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. This OEM module is approved for use in products operating as mobile transmitting device. The antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.
C2PC. This device and associated FCC ID label are to be installed in the specific Notebook Computer with model number: Lenovo Edge 15 shown in this filing only by OEM or OEM integrators user installation is prohibited. Instructions on the installation and/or removal of this module may not be provided to the end user. Only the antenna(s) documented in this filing, installed in the manner specified, can be used with this device. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with operating instructions for satisfying RF exposure compliance requirements. |
various | Output Power listed is the maximum combined conducted output power as indicated in the filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. This OEM module is approved for use in products operating as mobile transmitting device. The antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. (Original grant date 5/8/2013)
Limited single modular approval. This Class II Permissive Change is to integrate this module into Lenovo Notebook, Model: TP00067A. SAR compliance for portable use conditions has been evaluated as described in this filing. This device must use a BIOS lock mechanism which ensures that it only operates with the hosts as specified in the Certification filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. |
various | Output Power listed is the maximum combined conducted output power as indicated in the filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. When operating in 802.11n, 40 MHz mode, the operating frequency segment is limited to 2422 to 2452 MHz. This OEM module is approved for use in products operating as mobile transmitting device. The antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. (Original grant date 5/8/2013)
Limited single modular approval. This Class II Permissive Change is to integrate this module into Lenovo Notebook, Model: TP00067A. SAR compliance for portable use conditions has been evaluated as described in this filing. This device must use a BIOS lock mechanism which ensures that it only operates with the hosts as specified in the Certification filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. The highest reported SAR is 0.48 W/kg. |
various | This C2PC covers the use of the module in notebook computer, series of Lenovo S20-30/Lenovo S20-30 Touch, from Lenovo. This module and associated FCC ID label are to be installed in this specific notebook computer shown in this filing only by OEM or OEM integrators - user installation is prohibited. Instructions on the installation and/or removal of this module may not be provided to the end user. Only the antenna(s) documented This C2PC covers the use of the module in notebook computer from Lenovo. This module and associated FCC ID label are to be installed in this specific notebook computer shown in this filing only by OEM or OEM integrators - user installation is prohibited. Instructions on the installation and/or removal of this module may not be provided to the end user. Only the antenna(s) documented in this filing, installed in the manner specified, can be used with this device. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for stand-alone and simultaneous transmission exposure conditions are < 0.10 W/kg and 0.4 W/kg, respectively.
This device has 20/40 MHz bandwidth modes. |
various | This C2PC covers the use of the module in notebook computer, series of Lenovo S20-30/Lenovo S20-30 Touch, from Lenovo. This module and associated FCC ID label are to be installed in this specific notebook computer shown in this filing only by OEM or OEM integrators - user installation is prohibited. Instructions on the installation and/or removal of this module may not be provided to the end user. Only the antenna(s) documented in this filing, installed in the manner specified, can be used with this device. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for stand-alone and simultaneous transmission exposure conditions are <0.1 W/kg and 0.4 W/kg, respectively. |
various | Power listed is conducted. Limited single modular approval. This Class II Permissive Change is to integrate this module into Notebook Computer, Model Name: Lenovo Y50-70, Lenovo Y50-70 Touch, Lenovo Y50-80, Lenovo Y50-80 Touch, Trade Name: lenovo . SAR compliance for portable use conditions has been evaluated as described in this filing. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. The highest reported SAR is 0.18W/kg. |
various | Power listed is conducted. Limited single modular approval. This Class II Permissive Change is to integrate this module into Notebook Computer, Model Name: Lenovo Y50-70, Lenovo Y50-70 Touch, Lenovo Y50-80, Lenovo Y50-80 Touch, Trade Name: lenovo . The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. |
various | Output Power listed is the maximum combined conducted output power as indicated in the filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. This OEM module is approved for use in products operating as mobile transmitting device. The antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. (Date of Grant: 05/08/2013)
Class II Permissive Change: This Class II Permissive Change is to add a new type of antenna connector, and adding 121 sets of the same type of PIFA antennas. |
various | Output Power listed is the maximum combined conducted output power as indicated in the filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. When operating in 802.11n, 40 MHz mode, the operating frequency segment is limited to 2422 to 2452 MHz. This OEM module is approved for use in products operating as mobile transmitting device. The antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. (Date of Grant: 05/08/2013)
Class II Permissive Change: This Class II Permissive Change is to add a new type of antenna connector, and adding 121 sets of the same type of PIFA antennas. |
various | C2PC for adding portable host platform and new antenna.
The highest reported 1g SAR and simultaneous transmission SAR is 0.11W/kg, 1.56W/Kg respectively.
Output Power listed is the maximum combined conducted output power as indicated in
the filing. The antenna(s) used for this transmitter must be installed to provide a
separation distance of at least 20 cm from all persons and must not be co-located with
any other transmitters except in accordance with FCC multi-transmitter product
procedures. This OEM module is approved for use in products operating as mobile
transmitting device. The antennas approved for use with this module are those
documented in the filing, and must be installed in the manner specified therein. Grantee
shall provide installation and operating instructions for satisfying RF exposure
requirements to OEM integrators and installers. This grant is valid only when the device
is sold to OEM integrators and the OEM integrators are instructed to |
various | C2PC for adding portable host platform and new antenna.
The highest reported 1g SAR and simultaneous transmission SAR is 1.43W/kg, 1.56W/Kg respectively.
Output Power listed is the maximum combined conducted output power as indicated in
the filing. The antenna(s) used for this transmitter must be installed to provide a
separation distance of at least 20 cm from all persons and must not be co-located with
any other transmitters except in accordance with FCC multi-transmitter product
procedures. When operating in 802.11n, 40 MHz mode, the operating frequency
segment is limited to 2422 to 2452 MHz. This OEM module is approved for use in
products operating as mobile transmitting device. The antennas approved for use with
this module are those documented in the filing, and must be installed in the manner
specified therein. Grantee shall provide installation and operating instructions for
satisfying RF exposure requirements to OEM integrators and installers. This grant is
valid only when the device is sold to OEM integrators and the OEM integrators are
instructed to ensure that the end user has no manual instructions to remove or install the
device. |
various | C2PC for adding portable host platform and highest reported 1g SAR is 1.56W/kg.
Original Grant:
Output Power listed is the maximum combined conducted output power as indicated in
the filing. The antenna(s) used for this transmitter must be installed to provide a
separation distance of at least 20 cm from all persons and must not be co-located with
any other transmitters except in accordance with FCC multi-transmitter product
procedures. When operating in 802.11n, 40 MHz mode, the operating frequency
segment is limited to 2422 to 2452 MHz. This OEM module is approved for use in
products operating as mobile transmitting device. The antennas approved for use with
this module are those documented in the filing, and must be installed in the manner
specified therein. Grantee shall provide installation and operating instructions for
satisfying RF exposure requirements to OEM integrators and installers. This grant is
valid only when the device is sold to OEM integrators and the OEM integrators are
instructed to ensure that the end user has no manual instructions to remove or install the
device. |
various | C2PC for adding portable host platform.
Original:
Output Power listed is the maximum combined conducted output power as indicated in
the filing. The antenna(s) used for this transmitter must be installed to provide a
separation distance of at least 20 cm from all persons and must not be co-located with
any other transmitters except in accordance with FCC multi-transmitter product
procedures. This OEM module is approved for use in products operating as mobile
transmitting device. The antennas approved for use with this module are those
documented in the filing, and must be installed in the manner specified therein. Grantee
shall provide installation and operating instructions for satisfying RF exposure
requirements to OEM integrators and installers. This grant is valid only when the device
is sold to OEM integrators and the OEM integrators are instructed to |
various | Output Power listed is the maximum combined conducted output power as indicated in the filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. This OEM module is approved for use in products operating as mobile transmitting device. The antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. (Date of Grant: 05/08/2013)
CLASS II PERMISSIVE CHANGE: This Class II Permissive Change is to utilize a USB interface, and a change in the antenna connector location. |
various | Output Power listed is the maximum combined conducted output power as indicated in the filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. When operating in 802.11n, 40 MHz mode, the operating frequency segment is limited to 2422 to 2452 MHz. This OEM module is approved for use in products operating as mobile transmitting device. The antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. (Date of Grant: 05/08/2013)
CLASS II PERMISSIVE CHANGE: This Class II Permissive Change is to utilize a USB interface, and a change in the antenna connector location. |
various | Output Power listed is the maximum combined conducted output power as indicated in the filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. This OEM module is approved for use in products operating as mobile transmitting device. The antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.
This Class II Permissive Change adds the installation of this RF Module by end-users into the lenovo ThinkPad S440 via 2-way BIOS lock function. This device must use a BIOS lock mechanism which ensures that it only operates with the hosts as specified in the Certification filing. |
various | Output Power listed is the maximum combined conducted output power as indicated in the filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. When operating in 802.11n, 40 MHz mode, the operating frequency segment is limited to 2422 to 2452 MHz. This OEM module is approved for use in products operating as mobile transmitting device. The antennas approved for use with this module are those documented in the filing, and must be installed in the manner
specified therein. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.
This Class II Permissive Change adds the installation of this RF Module by end-users into the lenovo ThinkPad S440 via 2-way BIOS lock function. This device must use a BIOS lock mechanism which ensures that it only operates with the hosts as specified in the Certification filing. |
various | Output Power listed is the maximum combined conducted output power as indicated in the filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. When operating in 802.11n, 40 MHz mode, the operating frequency segment is limited to 2422 to 2452 MHz. This OEM module is approved for use in products operating as mobile transmitting device. The antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.
Class II Permissive Change upgrades mobile to portable RF exposure configuration. Highest Body SAR value: 0.77W/kg. Separation distance 0.5 cm. |
various | Output Power listed is the maximum combined conducted output power as indicated in the filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. When operating in 802.11n, 40 MHz mode, the operating frequency segment is limited to 2422 to 2452 MHz. This OEM module is approved for use in products operating as mobile transmitting device. The antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
various | Output Power listed is the maximum combined conducted output power as indicated in the filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. This OEM module is approved for use in products operating as mobile transmitting device. The antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
various | Is there an equipment authorization waiver associated with this application? | No |
various | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
app
s
|
Test Firm Name and Contact Information
|
various
|
Firm Name |
SPORTON International Inc.
|
various
|
SGS Taiwan Ltd.
|
various
|
Sporton International Inc.
|
various
|
Cerpass Technology (SuZhou) Co., Ltd.
|
various
|
SPORTON INTERNATIONAL INC.
|
various
|
Compliance Certification Services Inc.
|
various
|
Bureau Veritas CPS (H.K.) Ltd., Taoyuan Branch
|
various
|
A Test Lab Techno Corp.
|
various
|
Name |
A**** C******
|
various
|
R****** W****
|
various
|
M****** C****
|
various
|
K**** C******
|
various
|
H****** L******
|
various
|
K****** L******
|
various
|
J******** L********
|
various
|
Telephone Number |
886-3******** Extension:
|
various
|
+886-******** Extension:
|
various
|
86-05******** Extension:
|
various
|
886-3******** Extension:
|
various
|
886-3******** Extension:
|
various
|
886-2******** Extension:
|
various
|
+886-******** Extension:
|
various
|
886-3********
|
various
|
Fax Number |
886-3********
|
various
|
+886-********
|
various
|
86-05********
|
various
|
886-3********
|
various
|
886-3********
|
various
|
886-2********
|
various
|
+886-********
|
various
|
886-3********
|
various
|
E-mail |
a******@sporton.com.tw
|
various
|
R******@sgs.com
|
various
|
m******@cerpass.net
|
various
|
k******@ccsrf.com
|
various
|
h******@sgs.com
|
various
|
k******@tw.bureauveritas.com
|
various
|
J******@atl-lab.com.tw
|
|