app
s
|
Applicant Information
|
|
various
|
Effective |
2022-12-07
|
various
|
2022-04-19
|
various
|
2021-10-15
|
various
|
2021-08-16
|
various
|
2021-07-27
|
various
|
2020-07-09
|
various
|
2020-04-30
|
various
|
Applicant's complete, legal business name |
Realtek Semiconductor Corp.
|
various
|
FCC Registration Number (FRN) |
0020109807
|
various
|
Physical Address |
No. 2 Innovation Road II, Hsinchu Science Park
|
various
|
No. 2
|
various
|
Hsinchu, N/A 300
|
various
|
Hsinchu, N/A
|
various
|
Taiwan
|
|
app
s
|
TCB Information
|
various
|
TCB Application Email Address |
K******@sporton-usa.com
|
various
|
h******@acbcert.com
|
various
|
s******@nemko.com
|
various
|
c******@nacsemc.com
|
various
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|
app
s
|
FCC ID
|
various
|
Grantee Code |
TX2
|
various
|
Equipment Product Code |
RTL8822C
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
various
|
Name |
D******** L****
|
various
|
Title |
Project Manager
|
various
|
Telephone Number |
886-3******** Extension:
|
various
|
Fax Number |
886-3********
|
various
|
E-mail |
d******@realtek.com
|
|
app
s
|
Technical Contact
|
various
|
Firm Name |
Sporton International Inc.
|
various
|
DEKRA Testing and Certification Co., Ltd.
|
various
|
DEKRA Testing and Certification Co., Ltd
|
various
|
Name |
E****** H****
|
various
|
F******** Y****
|
various
|
J****** T********
|
various
|
Physical Address |
No.52, Huaya 1st Rd., Guishan Dist.
|
various
|
No.5-22, Ruishukeng, Linkou Dist.
|
various
|
Taoyuan, 333
|
various
|
Taoyuan City, 333
|
various
|
New Taipei City
|
various
|
New Taipei City, 24451
|
various
|
Taiwan
|
various
|
Telephone Number |
886-3********
|
various
|
886-2********
|
various
|
+8862********
|
various
|
Fax Number |
886-3********
|
various
|
886-2********
|
various
|
E-mail |
E******@sporton.com.tw
|
various
|
f******@dekra.com
|
various
|
J******@sporton.com.tw
|
|
app
s
|
Non Technical Contact
|
various
|
Firm Name |
Sporton International Inc.
|
various
|
Name |
I****** C********
|
various
|
Physical Address |
No.52, Huaya 1st Rd., Guishan Dist.
|
various
|
No.52, HwaYa 1st Rd., Guishan Dist.
|
various
|
Taoyuan, 333
|
various
|
Taoyuan City, 333
|
various
|
Taiwan
|
various
|
Telephone Number |
886-3********
|
various
|
Fax Number |
886-3********
|
various
|
E-mail |
I******@sporton.com.tw
|
various
|
i******@sporton.com.tw
|
|
app
s
|
Confidentiality (long or short term)
|
various |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
various | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
various | No |
various | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 06/06/2023 |
various | 04/13/2022 |
various | 02/12/2022 |
various | 01/23/2022 |
various | 01/06/2021 |
various | 10/27/2020 |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
various |
Is this application for software defined/cognitive radio authorization? | No |
various | Equipment Class | DTS - Digital Transmission System |
various | DSS - Part 15 Spread Spectrum Transmitter |
various | NII - Unlicensed National Information Infrastructure TX |
various | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | 11a/b/g/n/ac RTL8822C Combo module |
various | 11a/b/g/n/ac RTL8822C Combo Module |
various | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | Yes |
various | No |
various | Modular Equipment Type | Limited Single Modular Approval |
various | Single Modular Approval |
various | Purpose / Application is for | Class II permissive change or modification of presently authorized equipment |
various | Class II Permissive Change |
various | Original Equipment |
various | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
various | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
various | Grant Comments | Class II Permissive Change: This change incorporates the subject approved module into a Steam Deck (Brand/Model: Valve / 1010) with antennas of equivalent type with lesser gain as described in this filing. Any configuration other than the one described will require a separate approval. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements.
The highest reported SAR values for body, simultaneous transmission and extremity (hand), use conditions 0.70 W/kg, 1.12 W/kg and 0.39 W/kg (10g) respectively.
Power listed is maximum conducted output power. This device supports 20 and 40 MHz bandwidth modes for WLAN. Single modular approval for mobile RF exposure conditions. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
various | Class II Permissive Change: This change incorporates the subject approved module into a Steam Deck (Brand/Model: Valve / 1010) with antennas of equivalent type with lesser gain as described in this filing. Any configuration other than the one described will require a separate approval. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements.
The highest reported SAR values for body, simultaneous transmission and extremity (hand), use conditions < 0.1 W/kg, 1.06 W/kg and < 0.1 W/kg (10g) respectively.
Power listed is maximum conducted output power. Single modular approval for mobile RF exposure conditions. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
various | Class II Permissive Change: This change incorporates the subject approved module into a Steam Deck (Brand/Model: Valve / 1010) with antennas of equivalent type with lesser gain as described in this filing. Any configuration other than the one described will require a separate approval. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements.
The highest reported SAR values for body, simultaneous transmission and extremity (hand), use conditions 1.06 W/kg, 1.06 W/kg and 0.98 W/kg (10g) respectively.
Power listed is maximum combined conducted output power. This device supports 20, 40, and 80 MHz bandwidth modes. Single modular approval for mobile RF exposure conditions. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
various | Power listed is maximum conducted output power. This device supports 20 and 40 MHz bandwidth modes for WLAN. Single modular approval for mobile RF exposure conditions. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.
This C2PC filing establishes portable category for Dynabook platform with models: SATELLITE C50D-B and SATELLITE PRO C50D-B, along with the antennas (main and aux) that are of the similar type and lower gain compared from the original approval; as well as the power reduction for WLAN transmitters. SAR measurement was performed to demonstrate RF Exposure compliance. The highest reported Body and Simultaneous SAR values are 0.83 W/kg and 1.44 W/kg, respectively. |
various | Power listed is maximum conducted output power. Single modular approval for mobile RF exposure conditions. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.
This C2PC filing establishes portable category for Dynabook platform with models: SATELLITE C50D-B and SATELLITE PRO C50D-B, along with the antennas (main and aux) that are of the similar type and lower gain compared from the original approval; as well as the power reduction for WLAN transmitters. SAR measurement was performed to demonstrate RF Exposure compliance. The highest reported Body and Simultaneous SAR values are 0.03 W/kg and 1.16 W/kg, respectively. |
various | Power listed is maximum combined conducted output power. This device supports 20, 40, and 80 MHz bandwidth modes. Single modular approval for mobile RF exposure conditions. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.
This C2PC filing establishes portable category for Dynabook platform with models: SATELLITE C50D-B and SATELLITE PRO C50D-B, along with the antennas (main and aux) that are of the similar type and lower gain compared from the original approval; as well as the power reduction for WLAN transmitters. SAR measurement was performed to demonstrate RF Exposure compliance. The highest reported Body and Simultaneous SAR values are 1.14 W/kg and 1.16 W/kg, respectively. |
various | Class II Permissive Change: This change incorporates the subject approved module into a Steam Deck (Brand/Model: Valve / 1010) with antennas of equivalent type with lesser gain as described in this filing. Any configuration other than the one described will require a separate approval. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements.
The highest reported SAR values for body, simultaneous transmission and extremity (hand), use conditions 0.89 W/kg, 0.89 W/kg and 0.45 W/kg (10g) respectively.
Power listed is maximum conducted output power. This device supports 20 and 40 MHz bandwidth modes for WLAN. Single modular approval for mobile RF exposure conditions. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
various | Class II Permissive Change: This change incorporates the subject approved module into a Steam Deck (Brand/Model: Valve / 1010) with antennas of equivalent type with lesser gain as described in this filing. Any configuration other than the one described will require a separate approval. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements.
The highest reported SAR values for body, simultaneous transmission and extremity (hand), use conditions 0.93 W/kg, 0.93 W/kg and 0.83 W/kg (10g) respectively.
Power listed is maximum combined conducted output power. This device supports 20, 40, and 80 MHz bandwidth modes. Single modular approval for mobile RF exposure conditions. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
various | Class II Permissive Change: This change incorporates the subject approved module into a Steam Deck (Brand/Model: Valve / 1010) with antennas of equivalent type with lesser gain as described in this filing. Any configuration other than the one described will require a separate approval. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements.
The highest reported SAR values for body, simultaneous transmission and extremity (hand), use conditions < 0.1 W/kg, 0.88 W/kg and < 0.1 W/kg (10g) respectively.
Power listed is maximum conducted output power. Single modular approval for mobile RF exposure conditions. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
various | Power listed is maximum conducted output power. Single modular approval for mobile RFexposure conditions. Co-transmission of this module with other transmitters requires aseparate evaluation according to FCC multi-transmitter procedures. The host integratormust follow the integration instructions provided by the module manufacturer and ensurethat the composite-system end product complies with the FCC requirements by a technicalassessment or evaluation to the FCC rules and to KDB Publication 996369. The moduleantenna(s) must be installed to meet the RF exposure compliance separation distance of20 cm and any additional testing and authorization process as required. The modulegrantee is responsible for providing the documentation to the system integrator onrestrictions of use, for continuing compliance of the module. The host integrator installingthis module into their product must ensure that the final composite product complies withthe FCC requirements by a technical assessment or evaluation to the FCC rules, includingthe transmitter operation and should refer to guidance in KDB 996369. Approval is limitedto OEM installation only. This grant is valid only when the device is sold to OEM integratorsand the OEM integrators are instructed to ensure that the end user has no manualinstructions to remove or install the device
Class II Permissive Change with a decrease in the Output Power through firmware and to request approval for portable category specific host of ASUS Notebook PC, model number: CM1400FX and CL1400FX, with antenna AWAN, part no. AYP6Y-100178 and AYP6Y-100179.
The highest reported Body and Simultaneous SAR values are <0.10W/kg and 1.22W/kg respectively. |
various | Power listed is maximum combined conducted output power. This device supports 20, 40,
and 80 MHz bandwidth modes. Single modular approval for mobile RF exposure
conditions. Co-transmission of this module with other transmitters requires a separate
evaluation according to FCC multi-transmitter procedures. The host integrator must follow
the integration instructions provided by the module manufacturer and ensure that the
composite-system end product complies with the FCC requirements by a technical
assessment or evaluation to the FCC rules and to KDB Publication 996369. The module
antenna(s) must be installed to meet the RF exposure compliance separation distance of
20 cm and any additional testing and authorization process as required. The module
grantee is responsible for providing the documentation to the system integrator on
restrictions of use, for continuing compliance of the module. The host integrator installing
this module into their product must ensure that the final composite product complies with
the FCC requirements by a technical assessment or evaluation to the FCC rules, including
the transmitter operation and should refer to guidance in KDB 996369. Approval is limited
to OEM installation only. This grant is valid only when the device is sold to OEM integrators
and the OEM integrators are instructed to ensure that the end user has no manual
instructions to remove or install the device.
Class II Permissive Change with a decrease in the Output Power through firmware and to request approval for portable category specific host of ASUS Notebook PC, model number: CM1400FX and CL1400FX, with antenna AWAN, part no. AYP6Y-100178 and AYP6Y-100179.
The highest reported Body and Simultaneous SAR values are 0.99W/kg and 1.58W/kg respectively. |
various | Power listed is maximum conducted output power. This device supports 20 and 40 MHz bandwidth modes for WLAN. Single modular approval for mobile RF exposure conditions. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.
Class II Permissive Change with a decrease in the Output Power through firmware and to request approval for portable category specific host of ASUS Notebook PC, model number: CM1400FX and CL1400FX, with antenna AWAN, part no. AYP6Y-100178 and AYP6Y-100179.
The highest reported Body and Simultaneous SAR values are 1.14W/kg and 1.22W/kg respectively. |
various | Power listed is maximum conducted output power. Single modular approval for mobile RF exposure conditions. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.
Class II Permissive Change with a decrease in the WLAN Output Power and tp request approval for portable category specific host Notebook PC, model number ASUS CM5500FD,CL5500FD, CM5500FDA and CL5500FDA with antenna AWAN, part no. AYF6Y-100048 andAYF6Y-100049.
The highest reported reported Body and Simultaneous SAR values are 0.14 W/kg and 1.33 W/kg. |
various | Power listed is maximum combined conducted output power. This device supports 20, 40, and 80 MHz bandwidth modes. Single modular approval for mobile RF exposure conditions. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.
Class II Permissive Change with a decrease in the WLAN Output Power and tp request approval for portable category specific host Notebook PC, model number ASUS CM5500FD,CL5500FD, CM5500FDA and CL5500FDA with antenna AWAN, part no. AYF6Y-100048 andAYF6Y-100049.
The highest reported reported Body and Simultaneous SAR values are 1.19 W/kg and 1.33 W/kg. |
various | Power listed is maximum conducted output power. This device supports 20 and 40 MHz bandwidth modes for WLAN. Single modular approval for mobile RF exposure conditions.Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.
Class II Permissive Change with a decrease in the WLAN Output Power and tp request approval for portable category specific host Notebook PC, model number ASUS CM5500FD,CL5500FD, CM5500FDA and CL5500FDA with antenna AWAN, part no. AYF6Y-100048 andAYF6Y-100049.
The highest reported reported Body and Simultaneous SAR values are 0.97 W/kg and1.34 W/kg. |
various | Power listed is maximum combined conducted output power. This device supports 20, 40, and 80 MHz bandwidth modes. Single modular approval for mobile RF exposure conditions. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.
Class II Permissive Change to request approval for Portable category Configuration. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.79W/kg and 0.88W/kg, respectively.
This module is approved in portable configurations with antenna REALTEK reference Antenna and Type PIFA at 5mm minimum test separation distance. |
various | Power listed is maximum conducted output power. Single modular approval for mobile RF exposure conditions. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.
Class II Permissive Change to request approval for Portable category Configuration. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are <0.10W/kg and 0.88W/kg, respectively.
This module is approved in portable configurations with antenna REALTEK reference Antenna and Type PIFA at 5mm minimum test separation distance. |
various | Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth modes.
Class II Permissive Change to request approval for Portable category Configuration. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.73W/kg and 0.82W/kg, respectively.
This module is approved in portable configurations with antenna REALTEK reference Antenna and Type PIFA at 5mm minimum test separation distance. |
various | Power listed is maximum combined conducted output power. This device supports 20, 40, and 80 MHz bandwidth modes. Single modular approval for mobile RF exposure conditions. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
various | Power listed is maximum conducted output power. This device supports 20 and 40 MHz bandwidth modes for WLAN. Single modular approval for mobile RF exposure conditions. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
various | Power listed is maximum conducted output power. Single modular approval for mobile RF exposure conditions. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
various | Is there an equipment authorization waiver associated with this application? | No |
various | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
app
s
|
Test Firm Name and Contact Information
|
various
|
Firm Name |
SPORTON International Inc.
|
various
|
DEKRA TESTING AND CERTIFICATION CO., LTD. LinKou
|
various
|
DEKRA TESTING AND CERTIFICATION Lin Kou Lab.
|
various
|
Bureau Veritas CPS (H.K.) Ltd., Taoyuan Branch
|
various
|
Bureau Veritas CPS(H.K.) Ltd., Taoyuan Branch
|
various
|
Name |
A****** C******
|
various
|
M****** L****
|
various
|
V**** L******
|
various
|
K**** L******
|
various
|
E**** L****
|
various
|
Telephone Number |
+886-******** Extension:
|
various
|
+886-******** Extension:
|
various
|
886-3******** Extension:
|
various
|
88628******** Extension:
|
various
|
+886-******** Extension:
|
various
|
886-3******** Extension:
|
various
|
Fax Number |
+886-********
|
various
|
886-3********
|
various
|
88628********
|
various
|
+886-********
|
various
|
+886-********
|
various
|
E-mail |
a******@sporton.com.tw
|
various
|
m******@dekra.com
|
various
|
v******@dekra.com
|
various
|
k******@tw.bureauveritas.com
|
various
|
e******@tw.bureauveritas.com
|
|