app
s
|
Applicant Information
|
|
1 2 3 4 5 6 7
|
Effective |
2016-05-30
|
1 2 3 4 5 6 7
|
2012-06-22
|
1 2 3 4 5 6 7
|
2011-11-09
|
1 2 3 4 5 6 7
|
2011-09-21
|
1 2 3 4 5 6 7
|
Applicant's complete, legal business name |
Datalogic S.r.l.
|
1 2 3 4 5 6 7
|
FCC Registration Number (FRN) |
0016179699
|
1 2 3 4 5 6 7
|
Physical Address |
Via S. Vitalino 13
|
1 2 3 4 5 6 7
|
Calderara di Reno, N/A 40012
|
1 2 3 4 5 6 7
|
Italy
|
|
app
s
|
TCB Information
|
1 2 3 4 5 6 7
|
TCB Application Email Address |
c******@telefication.com
|
1 2 3 4 5 6 7
|
m******@phoenix-testlab.de
|
1 2 3 4 5 6 7
|
D******@phoenix-testlab.de
|
1 2 3 4 5 6 7
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|
app
s
|
FCC ID
|
1 2 3 4 5 6 7
|
Grantee Code |
U4G
|
1 2 3 4 5 6 7
|
Equipment Product Code |
004W
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
1 2 3 4 5 6 7
|
Name |
R****** C******
|
1 2 3 4 5 6 7
|
Title |
Product Quality Leader
|
1 2 3 4 5 6 7
|
Telephone Number |
+39 0********
|
1 2 3 4 5 6 7
|
Fax Number |
+39 0********
|
1 2 3 4 5 6 7
|
E-mail |
r******@datalogic.com
|
|
app
s
|
Technical Contact
|
1 2 3 4 5 6 7
|
Firm Name |
International Certification Corp.
|
1 2 3 4 5 6 7
|
Name |
G******** C********
|
1 2 3 4 5 6 7
|
Physical Address |
No.3-1, Lane 6, Wen San 3rd St. Kwei Shan
|
1 2 3 4 5 6 7
|
Taiwan
|
1 2 3 4 5 6 7
|
Telephone Number |
886-3********
|
1 2 3 4 5 6 7
|
Fax Number |
886-3********
|
1 2 3 4 5 6 7
|
E-mail |
G******@icertifi.com.tw
|
|
app
s
|
Non Technical Contact
|
1 2 3 4 5 6 7
|
Firm Name |
International Certification Corp.
|
1 2 3 4 5 6 7
|
Name |
W****** L****
|
1 2 3 4 5 6 7
|
Physical Address |
No.3-1, Lane 6, Wen San 3rd St. Kwei Shan
|
1 2 3 4 5 6 7
|
Taiwan
|
1 2 3 4 5 6 7
|
Telephone Number |
886-3********
|
1 2 3 4 5 6 7
|
Fax Number |
886-3********
|
1 2 3 4 5 6 7
|
E-mail |
w******@icertifi.com.tw
|
|
app
s
|
Confidentiality (long or short term)
|
1 2 3 4 5 6 7 |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
1 2 3 4 5 6 7 | No |
1 2 3 4 5 6 7 | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No |
1 2 3 4 5 6 7 | Yes |
1 2 3 4 5 6 7 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 09/01/2012 |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
1 2 3 4 5 6 7 |
Is this application for software defined/cognitive radio authorization? | No |
1 2 3 4 5 6 7 | Equipment Class | NII - Unlicensed National Information Infrastructure TX |
1 2 3 4 5 6 7 | DTS - Digital Transmission System |
1 2 3 4 5 6 7 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | 802.11ag MIni Compact Flash Module |
1 2 3 4 5 6 7 | 802.11ag Mini Compact Flash Module |
1 2 3 4 5 6 7 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
1 2 3 4 5 6 7 | Modular Equipment Type | Single Modular Approval |
1 2 3 4 5 6 7 | Purpose / Application is for | Class II permissive change or modification of presently authorized equipment |
1 2 3 4 5 6 7 | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
1 2 3 4 5 6 7 | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
1 2 3 4 5 6 7 | Grant Comments | C2PC: Software modification change on U-NII 3 to accommodate with the new U-NII rules.
Power listed is conducted. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and End- Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
1 2 3 4 5 6 7 | Class II Permissive Change Filing adds specific portable host configuration as documented in the filing; other co-located configurations require separate evaluation. Compliance of this device in all final product configurations is the responsibility of the Grantee. Power listed is conducted. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Operating of this device in the 5150 MHz to 5250 MHz range is restricted to indoor use only. Highest reported SAR value is: Body: 0.43 W/kg, Head: 0.1 W/kg. |
1 2 3 4 5 6 7 | Class II Permissive Change Filing adds specific portable host configuration as documented in the filing; other co-located configurations require separate evaluation. Compliance of this device in all final product configurations is the responsibility of the Grantee. Power listed is conducted. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Highest reported SAR value is: Body: 0.43 W/kg, Head: 0.1 W/kg. |
1 2 3 4 5 6 7 | Class II Permissive Change Filing adds specific portable host configuration as documented in the filing; other co-located configurations require separate evaluation. Compliance of this device in all final product configurations is the responsibility of the Grantee. Power listed is conducted. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Highest reported SAR value is: Body: 0.43 W/kg. |
1 2 3 4 5 6 7 | Class II Permissive Change Filing adds specific portable host configuration as documented in the filing; other co-located configurations require separate evaluation. Compliance of this device in all final product configurations is the responsibility of the Grantee. Power listed is conducted. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Operating of this device in the 5150 MHz to 5250 MHz range is restricted to indoor use only. Highest reported SAR value is: Body: 0.43 W/kg. |
1 2 3 4 5 6 7 | Class II Permissive Change Filing adds specific portable host configuration and simultaneous transmission with device FCC ID: U4GA056 as documented in the filing; other co-located configurations require separate evaluation. Compliance of this device in all final product configurations is the responsibility of the Grantee. Power listed is conducted. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Operating of this device in the 5150 MHz to 5250 MHz range is restricted to indoor use only. Highest reported SAR value is: Body: 0.43 W/kg. |
1 2 3 4 5 6 7 | Class II Permissive Change Filing adds specific portable host configuration and simultaneous transmission with device FCC ID: U4GA056 as documented in the filing; other co-located configurations require separate evaluation. Compliance of this device in all final product configurations is the responsibility of the Grantee. Power listed is conducted. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Highest reported SAR value is: Body: 0.43 W/kg. |
1 2 3 4 5 6 7 | Is there an equipment authorization waiver associated with this application? | No |
1 2 3 4 5 6 7 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
app
s
|
Test Firm Name and Contact Information
|
1 2 3 4 5 6 7
|
Firm Name |
International Certification Corp.
|
1 2 3 4 5 6 7
|
7layers AG
|
1 2 3 4 5 6 7
|
Name |
F******** C********
|
1 2 3 4 5 6 7
|
R******** M****
|
1 2 3 4 5 6 7
|
Telephone Number |
886-3******** Extension:
|
1 2 3 4 5 6 7
|
49-21********
|
1 2 3 4 5 6 7
|
Fax Number |
886-3********
|
1 2 3 4 5 6 7
|
49-21********
|
1 2 3 4 5 6 7
|
E-mail |
J******@icertifi.com.tw
|
1 2 3 4 5 6 7
|
r******@7layers.de
|
|