app
s
|
Applicant Information
|
|
1 2 3 4
|
Effective |
2016-10-18
|
1 2 3 4
|
2016-05-27
|
1 2 3 4
|
Applicant's complete, legal business name |
PISMO LABS TECHNOLOGY LIMITED.
|
1 2 3 4
|
FCC Registration Number (FRN) |
0016347064
|
1 2 3 4
|
Physical Address |
A8, 5/F, HK Spinners Industrial Building, Phase 6
|
1 2 3 4
|
Cheung Sha Wan,, N/A
|
1 2 3 4
|
Hong Kong
|
|
app
s
|
TCB Information
|
1 2 3 4
|
TCB Application Email Address |
u******@sgs.com
|
1 2 3 4
|
h******@acbcert.com
|
1 2 3 4
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|
app
s
|
FCC ID
|
1 2 3 4
|
Grantee Code |
U8G
|
1 2 3 4
|
Equipment Product Code |
P1AC1DUO
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
1 2 3 4
|
Name |
A****** C********
|
1 2 3 4
|
Title |
Director of Hardware Engineering
|
1 2 3 4
|
Telephone Number |
85229********
|
1 2 3 4
|
Fax Number |
85230********
|
1 2 3 4
|
E-mail |
a******@peplink.com
|
|
app
s
|
Technical Contact
|
1 2 3 4
|
Firm Name |
SGS-CSTS Standards Technical Services Co.
|
1 2 3 4
|
SGS-CSTC Standards Technical ServicesLtd
|
1 2 3 4
|
Name |
K**** X******
|
1 2 3 4
|
Physical Address |
No. 1 Workshop, M-10, Middle Section
|
1 2 3 4
|
No.1 Workshop, M-10, Middle Section
|
1 2 3 4
|
Shenzhen, 518057
|
1 2 3 4
|
China
|
1 2 3 4
|
Telephone Number |
0755-********
|
1 2 3 4
|
0755-********
|
1 2 3 4
|
Fax Number |
0755-********
|
1 2 3 4
|
0755-********
|
1 2 3 4
|
E-mail |
k******@sgs.com
|
|
app
s
|
Non Technical Contact
|
1 2 3 4
|
Firm Name |
SGS-CSTS Standards Technical Services Co.
|
1 2 3 4
|
SGS-CSTC Standards Technical ServicesLtd
|
1 2 3 4
|
Name |
S****** L******
|
1 2 3 4
|
V**** Y******
|
1 2 3 4
|
Physical Address |
No. 1 Workshop, M-10, Middle Section
|
1 2 3 4
|
No.1 Workshop, M-10, Middle Section
|
1 2 3 4
|
Shenzhen, 518057
|
1 2 3 4
|
China
|
1 2 3 4
|
Telephone Number |
0755-********
|
1 2 3 4
|
0755-******** Extension:
|
1 2 3 4
|
0755-********
|
1 2 3 4
|
Fax Number |
0755-********
|
1 2 3 4
|
E-mail |
s******@sgs.com
|
1 2 3 4
|
v******@sgs.com
|
|
app
s
|
Confidentiality (long or short term)
|
1 2 3 4 |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
1 2 3 4 | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
1 2 3 4 |
Is this application for software defined/cognitive radio authorization? | No |
1 2 3 4 | Equipment Class | DTS - Digital Transmission System |
1 2 3 4 | NII - Unlicensed National Information Infrastructure TX |
1 2 3 4 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Peplink / Pepwave / Pismo Labs wireless product |
1 2 3 4 | Peplink/ Pepwave/ Pismo Labs wireless product |
1 2 3 4 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
1 2 3 4 | Modular Equipment Type | Does not apply |
1 2 3 4 | Purpose / Application is for | Class II permissive change or modification of presently authorized equipment |
1 2 3 4 | Original Equipment |
1 2 3 4 | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
1 2 3 4 | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
1 2 3 4 | Grant Comments | Power Output listed is conducted. Device is an 802.11b/g/n device in a 3x3 Spatial Multiplexing MIMO configuration and enabled for 2.4 and 5 GHz band operations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
Class II Permissive Change for adding the additional LTE transmitters under FCC multi-transmitter product procedure as documented in this filing.
This device has 20 MHz and 40 MHz bandwidth modes. |
1 2 3 4 | Power Output listed is conducted. Device is an 802.11a/n/ac device in a 3x3 Spatial Multiplexing MIMO configuration and enabled for 2.4 and 5 GHz band operations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
Class II Permissive Change for adding the additional LTE transmitters under FCC multi-transmitter product procedure as documented in this filing.
This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes. |
1 2 3 4 | Power Output listed is conducted. Device is an 802.11n device in a 3x3 Spatial
Multiplexing MIMO configuration as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes. |
1 2 3 4 | Power Output listed is conducted. Device is an 802.11n device in a 3x3 Spatial
Multiplexing MIMO configuration as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
This device has 20 MHz and 40 MHz bandwidth modes. |
1 2 3 4 | Is there an equipment authorization waiver associated with this application? | No |
1 2 3 4 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
app
s
|
Test Firm Name and Contact Information
|
1 2 3 4
|
Firm Name |
SGS-CSTC Standards Technical Services Co.,Ltd.
|
1 2 3 4
|
Name |
J******** Z******
|
1 2 3 4
|
Telephone Number |
86755******** Extension:
|
1 2 3 4
|
Fax Number |
86075********
|
1 2 3 4
|
E-mail |
J******@sgs.com
|
|