app
s
|
Applicant Information
|
|
various
|
Effective |
2020-08-07
|
various
|
2020-08-06
|
various
|
2020-04-09
|
various
|
2020-01-08
|
various
|
2019-11-01
|
various
|
Applicant's complete, legal business name |
Micronet
|
various
|
FCC Registration Number (FRN) |
0016299190
|
various
|
Physical Address |
1865 West 2100 South Suite 2
|
various
|
1865 West 2100 South
|
various
|
Salt Lake City, UT
|
various
|
United States
|
|
app
s
|
TCB Information
|
various
|
TCB Application Email Address |
T******@TIMCOENGR.COM
|
various
|
T******@timcoengr.com
|
various
|
t******@timcoengr.com
|
various
|
TCB Scope |
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
various
|
A4: UNII devices & low power transmitters using spread spectrum techniques
|
various
|
B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
|
|
app
s
|
FCC ID
|
various
|
Grantee Code |
U8O
|
various
|
Equipment Product Code |
A9
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
various
|
Name |
N**** S****
|
various
|
Title |
Quality Manager
|
various
|
Telephone Number |
+1-80********
|
various
|
Fax Number |
+1-43********
|
various
|
E-mail |
n******@micronet-inc.com
|
|
app
s
|
Technical Contact
|
|
|
n/a |
|
app
s
|
Non Technical Contact
|
|
|
n/a |
|
app
s
|
Confidentiality (long or short term)
|
various |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
various | No |
various | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
various |
Is this application for software defined/cognitive radio authorization? | No |
various | Equipment Class | JBP - Part 15 Class B Computing Device Peripheral |
various | DSS - Part 15 Spread Spectrum Transmitter |
various | NII - Unlicensed National Information Infrastructure TX |
various | PCB - PCS Licensed Transmitter |
various | DTS - Digital Transmission System |
various | CXX - Communications Rcvr for use w/ licensed Tx and CBs |
various | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Micronet SmartCam |
various | SmarTab-8 |
various | A9 |
various | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
various | Modular Equipment Type | Does not apply |
various | Single Modular Approval |
various | Purpose / Application is for | Class II Permissive Change |
various | Original Equipment |
various | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
various | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
various | Grant Comments | C2PC: changing from modular approval to non-modular. Power listed is conducted. This device is to be used only for mobile and fixed applications. This device can only be used with the antenna design in strict compliance with the OEM instructions provided. The antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this device with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. OEM integrators and end-Users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. |
various | C2PC: changing from modular approval to non-modular. Power listed is conducted. This device is to be used only for mobile and fixed applications. This device can only be used with the antenna design in strict compliance with the OEM instructions provided. The antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this device with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. OEM integrators and end-Users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20, and 40 MHz bandwidth modes. |
various | C2PC: changing from modular approval to non-modular. Power listed is conducted. This device is to be used only for mobile and fixed applications. This device supports LTE Band 2, 4, 5, 7, 12, 13, and 17. The device was tested for QPSK, and 16QAM. This device supports LTE of 1.4, 3, 5, 10, 15 and 20 MHz bandwidth modes for Band 2, and 4; and LTE of 1.4, 3, 5 and 10 MHz bandwidth modes for Band 5 and 12; and LTE of 5, 10, 15 and 20 MHz bandwidth modes for Band 7; and LTE of 5 and 10 MHz bandwidth modes for Band 13 and 17. This device can only be used with the antenna design in strict compliance with the OEM instructions provided. The maximum antenna gain for this device as reported to the FCC is 6dBi. The antenna must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. OEM integrators and end-Users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device contains functions that are not operational in U.S. Territories. This filing is only applicable for U.S. operations. |
various | C2PC: changing from modular approval to non-modular. Power listed is conducted. This device is to be used only for mobile and fixed applications. This device can only be used with the antenna design in strict compliance with the OEM instructions provided. The antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. OEM integrators and end-Users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20, and 40 MHz bandwidth modes. |
various | Single Modular Approval. Power listed is conducted. This device is to be used only for mobile and fixed applications. This device supports LTE Band 2, 4, 5, 7, 12, 13, and 17. The device was tested for QPSK, and 16QAM. This device supports LTE of 1.4, 3, 5, 10, 15 and 20 MHz bandwidth modes for Band 2, and 4; and LTE of 1.4, 3, 5 and 10 MHz bandwidth modes for Band 5 and 12; and LTE of 5, 10, 15 and 20 MHz bandwidth modes for Band 7; and LTE of 5 and 10 MHz bandwidth modes for Band 13 and 17. This module can only be used with the antenna design in strict compliance with the OEM instructions provided. The maximum antenna gain for this module as reported to the FCC is 6 dBi. The module antenna must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. OEM integrators and end-Users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device contains functions that are not operational in U.S. Territories. This filing is only applicable for U.S. operations.
Class II Permissive Change: Adds portable operation when integrated into Micronet Model SmarTab 8 tablet computer. The highest reported SAR for product specific (10 g SAR) and simultaneous transmission exposure conditions are 2.81 W/kg and 2.94 W/kg, respectively. |
various | Single Modular Approval. Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Installers and end-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance
Class II Permissive Change: Adds portable operation when integrated into Micronet Model SmarTab 8 tablet computer. The highest reported SAR for product specific (10 g SAR) and simultaneous transmission exposure conditions are 0.18 W/kg and 2.94 W/kg, respectively. |
various | Single Modular Approval. Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Installers and end-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
Class II Permissive Change: Adds portable operation when integrated into Micronet Model SmarTab 8 tablet computer. |
various | Single Modular Approval.
Class II Permissive Change: Adds portable operation when integrated into Micronet Model SmarTab 8 tablet computer. |
various | Single Modular Approval. Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Installers and end-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
Class II Permissive Change: Adds portable operation when integrated into Micronet Model SmarTab 8 tablet computer. The highest reported SAR for product specific (10 g SAR) and simultaneous transmission exposure conditions are 0.13 W/kg and 2.94 W/kg, respectively. |
various | Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Installers and end-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
various | Single Modular Approval. Power listed is conducted. This device is to be used only for mobile and fixed applications. This module can only be used with the antenna design in strict compliance with the OEM instructions provided. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. OEM integrators and end-Users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. |
various | Single Modular Approval. Power listed is conducted. This device is to be used only for mobile and fixed applications. This module can only be used with the antenna design in strict compliance with the OEM instructions provided. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. OEM integrators and end-Users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20, and 40 MHz bandwidth modes. |
various | Single Modular Approval. Power listed is conducted. This device is to be used only for mobile and fixed applications. This device supports LTE Band 2, 4, 5, 7, 12, 13, and 17. The device was tested for QPSK, and 16QAM. This device supports LTE of 1.4, 3, 5, 10, 15 and 20 MHz bandwidth modes for Band 2, and 4; and LTE of 1.4, 3, 5 and 10 MHz bandwidth modes for Band 5 and 12; and LTE of 5, 10, 15 and 20 MHz bandwidth modes for Band 7; and LTE of 5 and 10 MHz bandwidth modes for Band 13 and 17. This module can only be used with the antenna design in strict compliance with the OEM instructions provided. The maximum antenna gain for this module as reported to the FCC is 6dBi. The module antenna must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. OEM integrators and end-Users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device contains functions that are not operational in U.S. Territories. This filing is only applicable for U.S. operations. |
various | Is there an equipment authorization waiver associated with this application? | No |
various | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
app
s
|
Test Firm Name and Contact Information
|
various
|
Firm Name |
East China Institute of Telecommunications
|
various
|
TA Technology (Shanghai) Co., Ltd.
|
various
|
Name |
Z******** Z********
|
various
|
M**** L******
|
various
|
Telephone Number |
86-21********
|
various
|
86-21********
|
various
|
E-mail |
z******@ecit.org.cn
|
various
|
l******@ta-shanghai.com
|
|