app
s
|
Applicant Information
|
|
1 2 3 4
|
Effective |
2019-12-10
|
1 2 3 4
|
2019-10-18
|
1 2 3 4
|
Applicant's complete, legal business name |
Dejero Labs Inc
|
1 2 3 4
|
FCC Registration Number (FRN) |
0024368920
|
1 2 3 4
|
Physical Address |
412 Albert St. suite 100
|
1 2 3 4
|
Waterloo, N/A
|
1 2 3 4
|
Canada
|
|
app
s
|
TCB Information
|
1 2 3 4
|
TCB Application Email Address |
h******@acbcert.com
|
1 2 3 4
|
TCB Scope |
B2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95, 97, & 101 (all below 3 GHz)
|
1 2 3 4
|
B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
|
|
app
s
|
FCC ID
|
1 2 3 4
|
Grantee Code |
Y99
|
1 2 3 4
|
Equipment Product Code |
DEJ565
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
1 2 3 4
|
Name |
B**** F****
|
1 2 3 4
|
Title |
Founder
|
1 2 3 4
|
Telephone Number |
51977******** Extension:
|
1 2 3 4
|
Fax Number |
51993********
|
1 2 3 4
|
E-mail |
b******@dejero.com
|
|
app
s
|
Technical Contact
|
1 2 3 4
|
Firm Name |
RF Exposure Lab
|
1 2 3 4
|
Name |
J******** M******
|
1 2 3 4
|
Physical Address |
802 N. Twin Oaks Valley Road, Suite 105
|
1 2 3 4
|
San Marcos, 92069
|
1 2 3 4
|
United States
|
1 2 3 4
|
Telephone Number |
76047********
|
1 2 3 4
|
E-mail |
i******@rfexposurelab.com
|
|
app
s
|
Non Technical Contact
|
|
|
n/a |
|
app
s
|
Confidentiality (long or short term)
|
1 2 3 4 |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No |
1 2 3 4 | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
1 2 3 4 |
Is this application for software defined/cognitive radio authorization? | No |
1 2 3 4 | Equipment Class | CBE - Citizens Band End User Devices |
1 2 3 4 | PCB - PCS Licensed Transmitter |
1 2 3 4 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Radio Module |
1 2 3 4 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | Yes |
1 2 3 4 | No |
1 2 3 4 | Modular Equipment Type | Single Modular Approval |
1 2 3 4 | Purpose / Application is for | Class II Permissive Change |
1 2 3 4 | Change in Identification |
1 2 3 4 | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
1 2 3 4 | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
1 2 3 4 | Grant Comments | This Class II permissive change is to request approval for portable category specific host Wireless Video Transceiver, model number: EG2xxx, with antenna Dejero part no 61-030/31 for cellular and Molex part no 2042810200 for WiFi. Highest Body and Simultaneous SAR is 1.13 W/kg and SPLSR=0.04 respectively.
Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
Single Modular Approval.
Power out is conducted at the antenna terminal. This device is to be used only for mobile and fixed
application; and must not be co- located or operating in conjunction with any other antenna or
transmitter, except in accordance with FCC multi- transmitter evaluation procedures as documented in
this filing. End-users and installers must be provided with antenna installation instructions and
transmitter operating conditions for satisfying RF exposure compliance. OEM integrator must insure
that the end user has no manual instructions to remove or install this module. For mobile operating
configurations the antenna gain, including cable loss, must not exceed the gains documented in this
filing for, as defined in 2.1091 for satisfying RF exposure compliance. Under no conditions may an
antenna gain be used that would exceed the EIRP power limits as specified in Part 96. The Grantee is
responsible for providing the documentation required for modular use. This device also supports some
other bands including: LTE Bands 2/4/5/7/12/13/26/30/41/66.
BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed. |
1 2 3 4 | This Class II permissive change is to request approval for portable category specific host Wireless Video Transceiver, model number: EG2xxx, with antenna Dejero part no 61-030/31 for cellular and Molex part no 2042810200 for WiFi. Highest Body and Simultaneous SAR is 1.13 W/kg and SPLSR=0.04 respectively.
Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
Single Modular Approval.
Power out is conducted at the antenna terminal. This device is to be used only for mobile and fixed application; and must not
be co- located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multitransmitter
evaluation procedures as documented in this filing. End-users and installers must be provided with antenna
installation instructions and transmitter operating conditions for satisfying RF exposure compliance. OEM integrator must
insure that the end user has no manual instructions to remove or install this module. For mobile operating configurations the
antenna gain, including cable loss, must not exceed the gains documented in this filing for, as defined in 2.1091 for satisfying
RF exposure compliance. Under no conditions may an antenna gain be used that would exceed the ERP and/or EIRP power
limits as specified in Part 22/24/27. The Grantee is responsible for providing the documentation required for modular use. This
device has 1.4 MHz, 3 MHz, 5 MHz, 10 MHz, 15 MHz and 20 MHz bandwidth modes for LTE Bands 2/4/66; 1.4 MHz, 3 MHz, 5
MHz and 10 MHz bandwidth modes for LTE Bands 5/12; 1.4 MHz, 3 MHz, 5 MHz, 10 MHz and 15 MHz bandwidth modes for
LTE Band 26; 5 MHz and 10 MHz bandwidth modes for LTE Bands 13/30; 5 MHz, 10 MHz, 15 MHz and 20 MHz bandwidth
modes for LTE Bands 7/41. This device also supports CA UL on the LTE Bands 7/41. |
1 2 3 4 | Change in ID. Single Modular Approval.
Power out is conducted at the antenna terminal. This device is to be used only for mobile and fixed application; and must not be co- located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter evaluation procedures as documented in this filing. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile operating configurations the antenna gain, including cable loss, must not exceed the gains documented in this filing for, as defined in 2.1091 for satisfying RF exposure compliance. Under no conditions may an antenna gain be used that would exceed the EIRP power limits as specified in Part 96. The Grantee is responsible for providing the documentation required for modular use. This device also supports some other bands including: LTE Bands 2/4/5/7/12/13/26/30/41/66. |
1 2 3 4 | Change in ID. Single Modular Approval.
Power out is conducted at the antenna terminal. This device is to be used only for mobile and fixed application; and must not be co- located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter evaluation procedures as documented in this filing. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile operating configurations the antenna gain, including cable loss, must not exceed the gains documented in this filing for, as defined in 2.1091 for satisfying RF exposure compliance. Under no conditions may an antenna gain be used that would exceed the ERP and/or EIRP power limits as specified in Part 22/24/27. The Grantee is responsible for providing the documentation required for modular use. This device has 1.4 MHz, 3 MHz, 5 MHz, 10 MHz, 15 MHz and 20 MHz bandwidth modes for LTE Bands 2/4/66; 1.4 MHz, 3 MHz, 5 MHz and 10 MHz bandwidth modes for LTE Bands 5/12; 1.4 MHz, 3 MHz, 5 MHz, 10 MHz and 15 MHz bandwidth modes for LTE Band 26; 5 MHz and 10 MHz bandwidth modes for LTE Bands 13/30; 5 MHz, 10 MHz, 15 MHz and 20 MHz bandwidth modes for LTE Bands 7/41. This device also supports CA UL on the LTE Bands 7/41. |
1 2 3 4 | Is there an equipment authorization waiver associated with this application? | No |
1 2 3 4 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
app
s
|
Test Firm Name and Contact Information
|
1 2 3 4
|
Firm Name |
RF Exposure Lab, LLC
|
1 2 3 4
|
SPORTON International Inc.
|
1 2 3 4
|
Name |
T****** M******
|
1 2 3 4
|
A******** C****
|
1 2 3 4
|
Telephone Number |
760 4********
|
1 2 3 4
|
886-3******** Extension:
|
1 2 3 4
|
Fax Number |
886-3********
|
1 2 3 4
|
E-mail |
t******@rfexposurelab.com
|
1 2 3 4
|
a******@sporton.com.tw
|
|