app
s
|
Applicant Information
|
|
1 2 3 4 5 6 7
|
Effective |
2022-06-23
|
1 2 3 4 5 6 7
|
2022-02-23
|
1 2 3 4 5 6 7
|
2022-01-21
|
1 2 3 4 5 6 7
|
Applicant's complete, legal business name |
Fibocom Wireless Inc.
|
1 2 3 4 5 6 7
|
FCC Registration Number (FRN) |
0020891057
|
1 2 3 4 5 6 7
|
Physical Address |
1101,Tower A, Building 6, Shenzhen International Innovation Valley, Dashi 1st Rd, Nanshan
|
1 2 3 4 5 6 7
|
1101,Tower A, Building 6, Shenzhen International
|
1 2 3 4 5 6 7
|
ShenZhen, N/A
|
1 2 3 4 5 6 7
|
China
|
|
app
s
|
TCB Information
|
1 2 3 4 5 6 7
|
TCB Application Email Address |
K******@sporton-usa.com
|
1 2 3 4 5 6 7
|
K******@sporton-usa.com
|
1 2 3 4 5 6 7
|
TCB Scope |
B2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95, 97, & 101 (all below 3 GHz)
|
1 2 3 4 5 6 7
|
B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
|
1 2 3 4 5 6 7
|
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
|
app
s
|
FCC ID
|
1 2 3 4 5 6 7
|
Grantee Code |
ZMO
|
1 2 3 4 5 6 7
|
Equipment Product Code |
L860GL16R
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
1 2 3 4 5 6 7
|
Name |
L******** L********
|
1 2 3 4 5 6 7
|
Title |
Certification Manager
|
1 2 3 4 5 6 7
|
Telephone Number |
+8675********
|
1 2 3 4 5 6 7
|
Fax Number |
+86-7********
|
1 2 3 4 5 6 7
|
E-mail |
l******@fibocom.com
|
|
app
s
|
Technical Contact
|
1 2 3 4 5 6 7
|
Firm Name |
Sporton International Inc.
|
1 2 3 4 5 6 7
|
Name |
A******** C******
|
1 2 3 4 5 6 7
|
Physical Address |
No.52, Huaya 1st Rd., Guishan Dist.
|
1 2 3 4 5 6 7
|
Taoyuan, 333
|
1 2 3 4 5 6 7
|
Taiwan
|
1 2 3 4 5 6 7
|
Telephone Number |
886-3********
|
1 2 3 4 5 6 7
|
Fax Number |
886-3********
|
1 2 3 4 5 6 7
|
E-mail |
a******@sporton.com.tw
|
|
app
s
|
Non Technical Contact
|
1 2 3 4 5 6 7
|
Firm Name |
Sporton International Inc.
|
1 2 3 4 5 6 7
|
Name |
I******** C******
|
1 2 3 4 5 6 7
|
Physical Address |
No.52, Huaya 1st Rd., Guishan Dist.
|
1 2 3 4 5 6 7
|
Taoyuan, 333
|
1 2 3 4 5 6 7
|
Taiwan
|
1 2 3 4 5 6 7
|
Telephone Number |
886-3********
|
1 2 3 4 5 6 7
|
Fax Number |
886-3********
|
1 2 3 4 5 6 7
|
E-mail |
i******@sporton.com.tw
|
|
app
s
|
Confidentiality (long or short term)
|
1 2 3 4 5 6 7 |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
1 2 3 4 5 6 7 | No |
1 2 3 4 5 6 7 | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No |
1 2 3 4 5 6 7 | Yes |
1 2 3 4 5 6 7 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 08/23/2022 |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
1 2 3 4 5 6 7 |
Is this application for software defined/cognitive radio authorization? | No |
1 2 3 4 5 6 7 | Equipment Class | CBE - Citizens Band End User Devices |
1 2 3 4 5 6 7 | PCB - PCS Licensed Transmitter |
1 2 3 4 5 6 7 | CXX - Communications Rcvr for use w/ licensed Tx and CBs |
1 2 3 4 5 6 7 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | LTE Module |
1 2 3 4 5 6 7 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
1 2 3 4 5 6 7 | Yes |
1 2 3 4 5 6 7 | Modular Equipment Type | Limited Single Modular Approval |
1 2 3 4 5 6 7 | Single Modular Approval |
1 2 3 4 5 6 7 | Purpose / Application is for | Class II Permissive Change |
1 2 3 4 5 6 7 | Change in Identification |
1 2 3 4 5 6 7 | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
1 2 3 4 5 6 7 | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
1 2 3 4 5 6 7 | Yes |
1 2 3 4 5 6 7 | Grant Comments | Class II Permissive Change: Add 2-way BIOS function. This device must use a BIOS lock mechanism which ensures that it only operates with the hosts as specified in the Certification filing.
Class II Permissive Change: This change incorporates the subject approved module into a Lenovo Notebook Computer (Model: TP00136A; TP00136B).The highest reported SAR values for body and simultaneous transmission, use conditions 1.17 W/kg and 1.20 W/kg, respectively.
Single Module approval is filing. Output power Listed is maximum Conducted Power. Module supports LTE (QPSK, 16QAM, 64QAM) Band 48 This module is designed for mobile device application and only documented Antenna and permitted gain can be used in OEM installation. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). Modular Approval for mobile RF Exposure conditions. OEM integrators must be provided with antenna installation instructions to satisfy RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
1 2 3 4 5 6 7 | Class II Permissive Change: Add 2-way BIOS function. This device must use a BIOS lock mechanism which ensures that it only operates with the hosts as specified in the Certification filing.
Class II Permissive Change: This change incorporates the subject approved module into a Lenovo Notebook Computer (Model: TP00136A; TP00136B). This device supports downlink carrier aggregation for inter-band and intra-band, uplink carrier aggregation for intra-band in LTE Band 5, Band 7, Band 66, Band 38 and Band 41.The highest reported SAR values for body and simultaneous transmission, use conditions 1.20 W/kg and 1.20 W/kg respectively.
Class II permissive change for adding new vendor of PCB, LTE Band 25 duplexer and GNSS LNA.
Single Module approval is filing. Output power Listed is maximum Conducted Power. Module supports WCDMA Band 2/4/5, LTE (QPSK, 16QAM, 64QAM) Band 2/4/5/7/12/13/14/17/25/26/30/38/41/66/71 and intra-band contiguous carrier
aggregationCA_5B, CA_7C, CA_38C, CA_41C, CA_66B,CA_66C. This module is designed for mobile device application and only documented Antenna and permitted gain can be used in OEM installation. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). Modular Approval for mobile RF Exposure conditions. OEM integrators must be provided with antenna installation instructions to satisfy RF exposure compliance. the antenna(s)used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
1 2 3 4 5 6 7 | Class II Permissive Change: This change incorporates the subject approved module into a Lenovo Notebook Computer (Model: TP00136A; TP00136B).The highest reported SAR values for body and simultaneous transmission, use conditions 1.17 W/kg and 1.20 W/kg respectively.
Single Module approval is filing. Output power Listed is maximum Conducted Power. Module supports LTE (QPSK, 16QAM, 64QAM) Band 48 This module is designed for mobile device application and only documented Antenna and permitted gain can be used in OEM installation. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). Modular Approval for mobile RF Exposure conditions. OEM integrators must be provided with antenna installation instructions to satisfy RF exposure compliance. the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
1 2 3 4 5 6 7 | Class II Permissive Change: This change incorporates the subject approved module into a Lenovo Notebook Computer (Model: TP00136A; TP00136B). This device supports downlink carrier aggregation for inter-band and intra-band, uplink carrier aggregation for intra-band in LTE Band 5, Band 7, Band 66, Band 38 and Band 41.The highest reported SAR values for body and simultaneous transmission, use conditions 1.20 W/kg and 1.20 W/kg respectively.
Class II permissive change for adding new vendor of PCB, LTE Band 25 duplexer and GNSS LNA.
Single Module approval is filing. Output power Listed is maximum Conducted Power. Module supports WCDMA Band 2/4/5, LTE (QPSK, 16QAM, 64QAM) Band 2/4/5/7/12/13/14/17/25/26/30/38/41/66/71 and intra-band contiguous carrier aggregationCA_5B, CA_7C, CA_38C, CA_41C, CA_66B,CA_66C. This module is designed for mobile device application and only documented Antenna and permitted gain can be used in OEM installation. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). Modular Approval for mobile RF Exposure conditions. OEM integrators must be provided with antenna installation instructions to satisfy RF exposure compliance. the antenna(s)used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
1 2 3 4 5 6 7 | Class II permissive change for adding new vendor of PCB, LTE Band 25 duplexer and GNSS LNA.
Single Module approval is filing. Output power Listed is maximum Conducted Power. Module supports WCDMA Band 2/4/5, LTE (QPSK, 16QAM, 64QAM) Band 2/4/5/7/12/13/14/17/25/26/30/38/41/66/71 and intra-band contiguous carrier aggregationCA_5B, CA_7C, CA_38C, CA_41C, CA_66B,CA_66C. This module is designed for mobile device application and only documented Antenna and permitted gain can be used in OEM installation. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). Modular Approval for mobile RF Exposure conditions. OEM integrators must be provided with antenna installation instructions to satisfy RF exposure compliance. the antenna(s)used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
1 2 3 4 5 6 7 | Single Module approval is filing. Output power Listed is maximum Conducted Power. Module supports LTE (QPSK, 16QAM, 64QAM) Band 48 This module is designed for mobile device application and only documented Antenna and permitted gain can be used in OEM installation. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). Modular Approval for mobile RF Exposure conditions. OEM integrators must be provided with antenna installation instructions to satisfy RF exposure compliance. the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
1 2 3 4 5 6 7 | Is there an equipment authorization waiver associated with this application? | No |
1 2 3 4 5 6 7 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
app
s
|
Test Firm Name and Contact Information
|
1 2 3 4 5 6 7
|
Firm Name |
Sporton International Inc. (Kunshan)
|
1 2 3 4 5 6 7
|
SPORTON International Inc.
|
1 2 3 4 5 6 7
|
Name |
J****** T******
|
1 2 3 4 5 6 7
|
A****** C********
|
1 2 3 4 5 6 7
|
Telephone Number |
+86 0********
|
1 2 3 4 5 6 7
|
+886-******** Extension:
|
1 2 3 4 5 6 7
|
E-mail |
J******@sporton.com.tw
|
1 2 3 4 5 6 7
|
a******@sporton.com.tw
|
|