|
app
s
|
Applicant Information
|
|
|
1 2 3 4
|
Effective |
2021-08-17
|
|
1 2 3 4
|
2020-10-15
|
|
1 2 3 4
|
2018-12-24
|
|
1 2 3 4
|
2018-11-29
|
|
1 2 3 4
|
Applicant's complete, legal business name |
Fibocom Wireless Inc.
|
|
1 2 3 4
|
FCC Registration Number (FRN) |
0020891057
|
|
1 2 3 4
|
Physical Address |
1101,Tower A, Building 6, Shenzhen International Innovation Valley, Dashi 1st Rd, Nanshan
|
|
1 2 3 4
|
5/F,Tower A,Technology Building II, 1057 Nanhai Avenue
|
|
1 2 3 4
|
1101,Tower A, Building 6, Shenzhen International
|
|
1 2 3 4
|
5/F,Tower A,Technology Building II
|
|
1 2 3 4
|
5/F,Tower A,Technology Building II,1057 Nanhai Ave
|
|
1 2 3 4
|
ShenZhen, N/A
|
|
1 2 3 4
|
ShenZhen
|
|
1 2 3 4
|
ShenZhen, N/A 518000
|
|
1 2 3 4
|
China
|
|
|
app
s
|
TCB Information
|
|
1 2 3 4
|
TCB Application Email Address |
L******@ul.com
|
|
1 2 3 4
|
s******@nemko.com
|
|
1 2 3 4
|
TCB Scope |
B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
|
|
|
app
s
|
FCC ID
|
|
1 2 3 4
|
Grantee Code |
ZMO
|
|
1 2 3 4
|
Equipment Product Code |
NL668AM00
|
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
|
1 2 3 4
|
Name |
L**** L********
|
|
1 2 3 4
|
X**** H********
|
|
1 2 3 4
|
Title |
Certification Manager
|
|
1 2 3 4
|
Regulatory Principal Engineer
|
|
1 2 3 4
|
Telephone Number |
+8675********
|
|
1 2 3 4
|
Fax Number |
+86-7********
|
|
1 2 3 4
|
E-mail |
l******@fibocom.com
|
|
1 2 3 4
|
k******@fibocom.com
|
|
|
app
s
|
Technical Contact
|
|
|
n/a |
|
|
app
s
|
Non Technical Contact
|
|
|
n/a |
|
|
app
s
|
Confidentiality (long or short term)
|
| 1 2 3 4 |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
| 1 2 3 4 | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
| 1 2 3 4 | No |
| 1 2 3 4 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 02/13/2022 |
| 1 2 3 4 | 06/19/2019 |
| 1 2 3 4 | 05/28/2019 |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
| 1 2 3 4 |
Is this application for software defined/cognitive radio authorization? | No |
| 1 2 3 4 | Equipment Class | PCB - PCS Licensed Transmitter |
| 1 2 3 4 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | LTE module |
| 1 2 3 4 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
| 1 2 3 4 | Modular Equipment Type | Single Modular Approval |
| 1 2 3 4 | Purpose / Application is for | Class II Permissive Change |
| 1 2 3 4 | Class II permissive change or modification of presently authorized equipment |
| 1 2 3 4 | Original Equipment |
| 1 2 3 4 | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | No |
| 1 2 3 4 | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
| 1 2 3 4 | Grant Comments | Class II permissive change to be integrated in the specific portable Notebook Computer (Samsung XE345XDA, XE345XDA-MA1TM) with antenna and disabled some frequency bands (WCDMA B5 and LTE B13, B17) by software that described in this filing.
Single Modular Approval. Power output listed is conducted at the antenna terminal. This device is to be used only for mobile and fixed application, and must not be collocated or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must ensure that the End-Users has no manual instructions to remove or install this module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 7 dBi at 600 MHz, 700 MHz, 850 MHz, 1900 MHz, and 5 dBi at 1700 MHz as defined in 2.1091 for satisfying RF exposure compliance. Under no conditions may an antenna gain be used that would exceed the ERP and EIRP power limits as specified in Parts 22, 24 and 27. |
| 1 2 3 4 | Single Modular Approval. Power output listed is conducted at the antenna terminal.
This device is to be used only for mobile and fixed application, and must not be
collocated or operating in conjunction with any other antenna or transmitter, except in
accordance with FCC multi-transmitter evaluation procedures as documented in this
filing. OEM integrators must be provided with antenna installation instructions and
labeling requirements for finished products. OEM integrators and End-Users must be
provided with transmitter operation conditions for satisfying RF exposure compliance.
OEM integrators must ensure that the End-Users has no manual instructions to
remove or install this module. For mobile and fixed operating configurations the
antenna gain, including cable loss, must not exceed 7 dBi at 600 MHz, 700 MHz, 850
MHz, 1900 MHz, and 5 dBi at 1700 MHz as defined in 2.1091 for satisfying RF
exposure compliance. Under no conditions may an antenna gain be used that would
exceed the ERP and EIRP power limits as specified in Parts 22, 24 and 27.
Class II Permissive Change. |
| 1 2 3 4 | Single Modular Approval. Power output listed is conducted at the antenna terminal.
This device is to be used only for mobile and fixed application, and must not be
collocated or operating in conjunction with any other antenna or transmitter, except in
accordance with FCC multi-transmitter evaluation procedures as documented in this
filing. OEM integrators must be provided with antenna installation instructions and
labeling requirements for finished products. OEM integrators and End-Users must be
provided with transmitter operation conditions for satisfying RF exposure compliance.
OEM integrators must ensure that the End-Users has no manual instructions to
remove or install this module. For mobile and fixed operating configurations the
antenna gain, including cable loss, must not exceed 7 dBi at 600 MHz, 700 MHz, 850
MHz, 1900 MHz, and 5 dBi at 1700 MHz as defined in 2.1091 for satisfying RF
exposure compliance. Under no conditions may an antenna gain be used that would
exceed the ERP and EIRP power limits as specified in Parts 22, 24 and 27.
Class II permissive change. |
| 1 2 3 4 | Single Modular Approval. Power output listed is conducted at the antenna terminal. This device is to be used only for mobile and fixed application, and must not be collocated or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.
OEM integrators must ensure that the End-Users has no manual instructions to
remove or install this module.
For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 7 dBi at 600 MHz, 700 MHz, 850 MHz, 1900 MHz, and 5 dBi at 1700 MHz as defined in 2.1091 for satisfying RF exposure compliance. Under no conditions may an antenna gain be used that would exceed the ERP and EIRP power limits as specified in Parts 22, 24 and 27. |
| 1 2 3 4 | Is there an equipment authorization waiver associated with this application? | No |
| 1 2 3 4 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
|
app
s
|
Test Firm Name and Contact Information
|
|
1 2 3 4
|
Firm Name |
KCTL INC
|
|
1 2 3 4
|
Sporton International (Kunshan) Inc.
|
|
1 2 3 4
|
Sporton International (Shenzen) Inc.
|
|
1 2 3 4
|
Name |
S******** L******
|
|
1 2 3 4
|
J****** T********
|
|
1 2 3 4
|
M******** L****
|
|
1 2 3 4
|
Telephone Number |
+82-3********
|
|
1 2 3 4
|
+86 0********
|
|
1 2 3 4
|
86-51********
|
|
1 2 3 4
|
E-mail |
s******@kctl.co.kr
|
|
1 2 3 4
|
J******@sporton.com.tw
|
|
1 2 3 4
|
m******@sporton.com.tw
|
|