submitted | available | document details (if available) | source link |
---|---|---|---|
December 08 2019 | December 08 2019 |
various | User Manual | Users Manual | 2.50 MiB | December 08 2019 |
1800 FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates and can radiate radio frequency energy. If not installed and used in accordance with the instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. Verification of harmful interference by this equipment to radio or television reception can be determined by turning it off and then on. The user is encouraged to try to correct the interference by one or more of the following measures:
z Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. z Connect the equipment into an outlet on a different circuit to that of the receiver's outlet. z Consult the dealer or an experienced radio/TV technician for help. Operation is subject to the following two conditions:
z This device may not cause harmful interference. z This device must accept any interference received, including interference that may cause undesired operation. Operating Instructions:
z Transmit no more than the rated duty factor of 50% of the time. To transmit (talk), push the Push-To-Talk (PTT) key. To receive calls, release the PTT key. Transmitting 50% of the time, or less, is important because the radio generates measurable RF energy only when transmitting (in terms of measuring for standards compliance). z Keep the radio unit at least 2.5 cm away from the face. Keeping the radio at the proper distance is important as RF exposure decreases with distance from the antenna. The antenna should be kept away from the face and eyes. z When worn on the body, always place the radio in a approved holder, holster, case, or body harness or by use of the correct clip for this product. Use of non-approved accessories may result in exposure levels which exceed the FCC's occupational/controlled environmental RF exposure limits. z Use of non-approved antennas, batteries, and accessories causes the radio to exceed the FCC RF exposure guidelines. z Contact your local dealer for the optional accessories of the product. ISED Statement Note: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. The device has been tested and complies with SAR limits, users can obtain Canadian information on RF exposure and compliance RF Exposure Compliance and Control Guidelines and Operating Instructions Aprs examen de ce matriel aux conformit aux limites DAS et/ou aux limites dintensit de champ RF, les utilisateurs peuvent sur lexposition aux radiofrquences et la conformit and compliance dacqurir les informations correspondantes To control your exposure and ensure compliance with the occupational/controlled environmental exposure limits, always adhere to the following procedures. This device complies with Innovation, Science and Economic Development Canada Compliance license-exempt RSS standard(s). Operation is subject to the following two conditions:
Guidelines:
z Do not remove the RF Exposure Label from the device. z User awareness instructions should accompany device when transferred to other users. z Do not use this device if the operational requirements described herein are not met. z This device may not cause harmful interference. z This device must accept any interference received, including interference that may cause undesired operation. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement
This product uses the FCC Data API but is not endorsed or certified by the FCC