| submitted | available | document details (if available) | source link |
|---|---|---|---|
| August 11 2017 | August 11 2017 |
| various | Users Manual | Users Manual | 1.44 MiB | August 11 2017 |
R27A DoorPhoneUserManual 1 AboutThisManual Thank you for choosing Akuvoxs products. In user manual, we provide all functions and configurationsyouwanttoknowaboutR27A.Pleaseverifythepackagingcontentandnetwork statusbeforesetting.Thismanualappliestofirmware26.0.2.170orlowerversion. Note:Theoldfirmwaremaybealittledifferentfrom27.0.2.170aboutsomeconfiguration.Please consultyouradministratorformoreinformation. FCC Caution:
Any Changes or modifications not expressly approved by the party responsible for compliance couldvoidtheuser'sauthoritytooperatetheequipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1)Thisdevicemaynotcauseharmfulinterference,and(2)thisdevicemustaccept anyinterferencereceived,includinginterferencethatmaycauseundesiredoperation. Note:ThisequipmenthasbeentestedandfoundtocomplywiththelimitsforaClassBdigital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, usesandcanradiateradiofrequencyenergyand,ifnotinstalledandusedinaccordancewiththe instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does causeharmfulinterferencetoradioortelevisionreception,whichcanbedeterminedbyturning theequipmentoffandon,theuserisencouragedtotrytocorrecttheinterferencebyoneor moreofthefollowingmeasures:
Reorientorrelocatethereceivingantenna. Increasetheseparationbetweentheequipmentandreceiver. Connecttheequipmentintoanoutletonacircuitdifferentfromthattowhichthereceiveris connected. Consultthedealeroranexperiencedradio/TVtechnicianforhelp. Content 1.Overview..................................................................................1 1.1.ProductDescription............................................................................................................1 1.2.Features..............................................................................................................................2 1.3.Keypad................................................................................................................................4 2.Configuration...........................................................................5 2.1.Administratorinterface......................................................................................................5 2.1.1SystemInformation..................................................................................................5 2.1.2AdminSettings.........................................................................................................5 2.1.3SystemSetting..........................................................................................................6 2.2.Userinterface.....................................................................................................................7 2.2.1PublicPinModif.......................................................................................................7 2.2.2AddUserCards.........................................................................................................7 2.2.3AddPrivatePin.........................................................................................................7 3.BasicUsing...............................................................................8 3.1.Makeacall.........................................................................................................................8 3.2.Receiveacall......................................................................................................................8 3.3.Unlock.................................................................................................................................8 4.Web.........................................................................................9 4.1.ObtainIPaddress...............................................................................................................9 4.2.Logintheweb.....................................................................................................................9 4.3.Status................................................................................................................................10 4.3.1Basic.......................................................................................................................10 4.4.Intercom...........................................................................................................................11 4.4.1Basic.......................................................................................................................11 4.4.2Advanced................................................................................................................12 4.4.3Relay.......................................................................................................................13 4.4.4Input.......................................................................................................................15 4.4.5LiveStream.............................................................................................................16 4.4.6RTSP........................................................................................................................17 4.4.7ONVIF.....................................................................................................................18 4.4.8Motion....................................................................................................................18 4.4.9CardSetting(R27Aonly).........................................................................................19 4.4.10Action...................................................................................................................20 4.5.Account............................................................................................................................22 4.5.1Basic.......................................................................................................................22 4.5.2Advanced................................................................................................................24 4.6.Network............................................................................................................................27 4.6.1Basic.......................................................................................................................27 4.6.2Advanced................................................................................................................28 4.7.Phone...............................................................................................................................29 4.7.1Time/Language......................................................................................................29 4.7.2CallFeature............................................................................................................30 4.7.3Voice.......................................................................................................................31 4.7.4DialPlan..................................................................................................................32 4.7.5Multicast.................................................................................................................33 4.7.6Calllog....................................................................................................................34 4.7.7Doorlog..................................................................................................................35 4.8.Upgrade............................................................................................................................35 4.8.1Basic.......................................................................................................................35 4.8.2Advanced................................................................................................................36 4.9.Security.............................................................................................................................38 4.9.1Basic.......................................................................................................................38 1. Overview 1.1. ProductDescription R27A Akuvox R27A is a SIPcompliant, handsfree and video outdoor phone. It can be connected with your Akuvox IP Phone for remote unlock control and monitor. You can operate the indoor handset to communicate with visitors via voice and video, and unlock the door if you wish. Users can also use RF card to unlock the door(R27AConly).Itsapplicableinvillas,officeandsoon. 1 1.2. Features Highlight Vandalresistantbody,withaflushbutton Wildanglecamera:120 POE(IEEE802.3af,PoweroverEthernet) TwowayaudiocommunicationoverIPnetworkwithEchocancelfeature ComplieswithSIPStandardforeasyintegrationineachSIPPBXes ComplieswithONVIFstandardforeasyintegrationwithanynetworksurveillance system Physical&Power Bodymaterial:allaluminum Camera:3Mpixels,automaticlighting Numerickeypadwithextrabuttons InfraredSensor:Support Wiegandport:Support RFCardReader:13.56MHz&125kHz OutputRelay:3outputrelaysfordooropener 802.3afPowerOverEthernet 12VDCconnector(ifnotusingPOE) Waterproof&Dustproof:IP65 FlushmountedDIM:280x130x68mm WallmountedDIM:280x130x38mm Installation:Flushmounted&Wallmounted 2 SIPEndpoint SIPv1(RFC2543),SIPv2(RFC3261) Audiocodecs:G.711a,G.711,G.722,G.729 Videocodecs:H264 SpeechQuality:7kHzAudio EchoCancellation VoiceActivationDetection ComfortNoiseGenerator Video Resolution:upto720p Maximumimagetransferrate:720p30pfs High intensity IR LEDs for picture lighting during dark hours with internal light sensor Compatiblewith3rd.Party.Videocomponents,e.g.NVRs. DoorEntryFeature RelaycontrolindividuallybyDTMFtones Camerapermanentlyoperational WhiteBalance:Auto AutonightmodewithLEDillumination Minimumillumination:0.1LUX NetworkFeatures 1x10/100MbpsEthernetPort 3 Protocolssupport:IPv4,HTTP,HTTPS,FTP,SNMP,DNS,NTP,RTSP,RTP,TCP,UDP, ICMP,DHCP,ARP 1.3. Keypad Key Description NumericKey ManageCenterKey DialingKey DeleteKey 4 2. Configuration 2.1. Administratorinterface Press*2396#toenteradministratorinterface.Administratorinterfaceprovidessome advanced permissions to administrators, including System Information, Admin SettingsandSystemSettings. 2.1.1SystemInformation Press1toenterSystemInformationtocheckIPaddress,MacaddressandFirmware versionofthedoorphone. 2.1.2AdminSettings 2.1.2.1Admincardsetting Addadmincard EnterAdminCardSettinginterface,andpress1toquickaddadmincard.Whenyou seePleaseSwipeAdminCard...,pleaseplaceadmincardintheRFcardreaderarea. AfterthescreenshowsAnadmincardisadded+1,itmeansaddingsuccessfully. Cleanadmincarddata EnterAdminCardSettinginterface,press2todeletethecurrentadmincard.When youseePleaseSwipeAdminCard....,andplacetheaddedadmincardyouwantto delete in the RF card area. After the screen shows An admin card is deleted, it meansdeletingsuccessfully. 5 2.1.2.2AdminCodeSetting Admincodeisusedtoenteradministratorinterface.Thedefaultcodeis2396.Enter AdminCodeSettingtoinput4digitnewadmincodes,clickDialkey 2.1.2.3ServiceCodeSetting tosave. ServiceCodeSettingisusedtoenteruserinterface.Thedefaultcodeis3888.Enter servicecodesettingtoinput4digitnewusercodes,andclickDialkey tosave. 2.1.3SystemSetting 2.1.3.1Networksettings Enter System Setting interface, and press 1 to enter Network setting. Select DHCP mode, door phone will access network automatically. Choose Static mode, users need to setup IP address, subnet mask and default gateway. Press Dial key whenyoufinisheachstep. 2.1.3.2StationNo.Settings UserscansetupthedeviceIDtolimittheunlockpermissions.
(Thisfunctioncannotbeusednow.Akuvoxwillperfectitinnextversion) 2.1.3.3Restoredefault EnterSystemsetting,andpress3toenterrestoreinterface.Afteryousuretomake thedevicerestoretofactorysetting,youcanswipeyouradmincardorenteradmin code,thenthedevicewillrestore. 6 2.2. Userinterface Press*3888#toenteruserinterface.UserinterfaceincludesPublicPinModif,Add User Cards and Add Private Pin. These functions can only be accessed by administrator. 2.2.1PublicPinModif ThedefaultpublicPinis33333333.BeforeyoumodifypublicPin,usersneedtoswipe admincardorenteradmincode,thenyoucanenter8digitnewPublicPin,clickDial tosave. key 2.2.2AddUserCards Usercardisusedtounlock.Beforeaddinguserscard,usersneedtoswipeadmincard orenteradmincode,thenyouwillseePleaseSwipeICCard...,placeusercardin the RF card reader . Then the screen will show Add IC Card +1, it means adding successfully. 2.2.3AddPrivatePin Userscanalsouseprivatepincodetounlock.Beforeaddingprivatepin,usersneed toswipeadmincardorenteradmincode.Thenentera8digitprivatepin,andclick Dialkey tosave. 7 3. BasicUsing 3.1. Makeacall Intheidleinterface,presstheaccountorIPaddress+Dialkey tomakeacall. 3.2. Receiveacall R27X will auto answer the incoming call by default. If users disable auto answer function,theycanpressdialkeytoanswertheincomingcall. 3.3. Unlock Unlock by Pin code: Users can unlock the door by using predefined Public Pin or PrivatePin.Press#+8digitPinCode+#tounlock,thenyouwillhearThedooris now opened. If users input the wrong Pin code, the screen will show Incorrect Code. UnlockbyRFCard(OnlyR27A):PlacethepredefinedusercardinRFcardreaderto unlock. Undernormalconditions, the phone will announce The door is now opened.Ifthecardhasnotbeenregistered,thephonewillshowUnauthorized. Unlock by DTMF Code: During the talking, the president can press the predefined DTMFcodetoremoteunlockthedoor.(Pleaserefertochapter4.4.4aboutDTMF codesetting).ThenyouwillalsohearThedoorisnowopened. 8 4. Web 4.1. ObtainIPaddress The Akuvox R27A use DHCP IP by default. Press *2396# to enter Administrator interface.EnterSystemInformationtocheckthephoneIPaddress. 4.2. Logintheweb OpenaWebBrowser,andenterthecorrespondingIPaddress.Then,typethedefault usernameandpasswordasbelowtologin:
Username:admin Password:admin 9 4.3. Status 4.3.1Basic Status,includingproductinformation,networkinformationandaccountinformation, canbeviewedfromStatus>Basic. Sections ProductInformation NetworkInformation AccountInformation Description To display the devices information such as Model name, MACaddress(IPdevicesphysicaladdress),Firmwareversion andHardwarefirmware. To display the devices Networking status(LAN Port),such as PortType(whichcouldbeDHCP/Static/PPPoE),LinkStatus,IP Address, Subnet Mask, Gateway, Primary DNS server, Secondary DNS server, Primary NTP server and Secondary NTP server(NTP server is used to synchronize time from INTERNETautomatically). To display devices Account information and Registration status (account username, registered servers address, Registerresult). 10 4.4. Intercom 4.4.1Basic Gotothepath:IntercomBasic Sections PublicKey DisplayNumber SpeedDial Description PublicKeyisusedtounlock. KeySwitch:Userscandisableorenablethisfunction. KeyValue:ThedefaultpublicKeyis33333333.Userscan modifybyyourself. Thisfunctionisusedtohideordisplaythenumberwhenyou operateinthephone.IfyouselectDisabled,thephonewill show*whenyoudial. ThisFeatureisusedtocallout4numbersinthesametime. After setup the number you need to call, press manage 11 centerkeytocall. Todialoutoranswerthephonefromwebsite. ThisfeatureissimilarwiththeInputevent.Onceusersmake acall,itwillexecutetheaction. Itsupports3typesFTP,Email,andHTTP TosetuptheFTPandEmailinActioninterface,theFTPserver and Email will receive the capture picture when call out. If you choose HTTP mode, enter the URL format: http://http serverIPaddress/anyinformation
(suchas,http://192.168.35.48/mac=000).Thenyouwillcheck thisinformationwhichcapturesthenetworkpacket. Toconfigurethemaxcalltime. Dial in Time: When other phone calls to R27A, if ring tone is over the Dial in Time without answer. The call willbehangup. DialoutTime:WhenR27Acalltotheotherparty,ifthe ringtoneisovertheDialoutTimewithoutanswer.R27A willcontinuetocalltonoanswercallnumberinorder. WebCall CallEvent MaxCallTime MaxDialTime 4.4.2Advanced Sections AECLevel Description AEC(Configurable Acoustic and Line Echo Cancelers) is used to adjust the echo effect during the communication. The default value is 700. Increase the level, the echo control is better. 12 Photoresistor TamperAlarm Wiegand 4.4.3Relay Photoresistor is used to sense the light intensity that R27A will auto enable infrared LED. Users can adjust the photosensitivevaluebyyourselves. EnabletheTamperAlarm,ifthegravityofR27Achanges,the phone will alarm. The Threshold value is smaller, the faster thereactionofdevice. Akuvox provides two Wiegand protocol. According to the correspondingwiegandaccessdevicetochoosethesuitable protocol. Sections PrivateKey Relay Description ImportorExportthePrivateKeytemplate. Toconfiguresomesettingsaboutunlock RelaySelect:R27Asupport3relays RelayType:Differentlocksusedifferentrelaytypes,default state or invert state. If you connect the Lock in NO connector, select default state. Otherwise using invert 13 state. Relay Delay(sec): Allows door remain open for certain periodTherangeisfrom1to10seconds DTMFOption:R27Asupport1234digitsDTMFunlock code.Pleaseselectonetypeandenterthecorresponding code. DTMF:Setup1digitDTMFcodeforremoteunlock Multiple DTMF: Setup multiple digits DTMF code for remoteunlock. Status:thestatuswillbechangedbytherelaystate. UserscanuseaURLtoremoteunlockthedoor. Switch: Enablethisfunction.Disablebydefault. Username&password:Userscansetuptheusernameand passwordforHTTPunlock.Nullbydefault URLformat:http://192.168.1.102/fcgi/do?action=OpenDoor&
UserName=&Password=&DoorNum=1 OpenRelayviaHTTP 14 4.4.4Input Sections Input Description Inputfunctionisusedtoopenthedoorfrominside. Trigger Option: According to different lock connection to choosedifferenttriggermode.Ifusersconnectinnormal open contact, select low. If you choose High, please connectinnormalclosecontact. Actiontoexecute:Chooseoneormorewaystoreceivethe actionmessage. HttpURL:IfyoutickHttpURL,thenentertheHttpserver IP address in the HTTP URL area. When the Input is triggered, URL format:
http://http server IP address/any information (such as http://192.168.35.48/mac=000 ). Then you will check this it will send Http message. 15 informationwhichcapturesthenetworkpacket. ActionDelay:Setuptheactiondelaytime.Afterthedelay time,thephonewillsendtotheactioninformationinthe correspondingway. OpenRelay:Tochooseasuitablerelayforinputconnector. 4.4.5LiveStream Sections Description LiveStream TochecktherealtimevideofromR27A. 16 4.4.6RTSP Sections RTSPBasic RTSPStream H.264VideoParameters MPEG4VideoParameters MJPEGVideoParameters Description To active the RTSP function, then R27A can be monitored. RTSPstreamformat:rtsp://deviceIP/live/ch00_0 To enable RTSP video and select the video codec. R27A supportsH264videocodec. H264:Avideostreamcompressionstandard.Differentfrom H263, it provides an approximately identical level of video streamqualitybutahalfbitrate.Thistypeofcompressionis sometimescalledMPEG4part10. Tomodifytheresolution,framerateandbitrateofH264 MPEG4: It is one of the network video image Compression standard. It supports the maximum Compression ratio 4000:1.Itisanimportantandcommonvideofunctionwith great communicationapplicationintegrationability andless coreprogramspace. Tomodifytheresolution,framerateandbitrateofMPEG4 MJPEG:calledMotionJointPhotographicExpertsGroup.Itis avideoencodingformatinwhicheachimageiscompressed separately by JPEG. MJPEG compression can produce high 17 qualityvideoimageandhasaflexibleconfigurationinvideo definitionandCompressedframes Tomodifytheresolution,framerateandbitrateofMJPEG Description TosetuptheONVIFfunctionparameters.Itisusedtoconnect withthecorrespondingONVIFtool. ONVIF Mode: Two modes Discoverable and Nondiscoverable. Discoverable by default. Only Discoverablemode,thenOnvifsoftwarecansearchR27X UserName:Tomodifytheusernameyouneed.Admin bydefault. Password:Tomodifythepasswordyouwant.Adminby default. Note:Usernameandpasswordisusedforauthentication. 4.4.7ONVIF Sections BasicSetting 4.4.8Motion Sections MotionDetection Description Motion detection is used to record the change of the surroundingenvironment. Motion Detection Options: Enable to active this 18 function. Action to execute: Select a suitable way to receive the
(FTP,EMAIL,SIP Call information. motion detection settingpleaserefertochapter4.4.10) 4.4.9CardSetting(R27Aonly) Sections Import/ExportCardData CardStatus CardEvent Description To import or export the card data file. Only support .xml format. Normal:ChooseNormalmodewhenreadingcard. Card Issuing: Choose Card Issuing mode when writing card. This feature is similar with the Input event. Once users use cardtounlock,itwillexecutetheaction. Itsupports3typesFTP,Email,HTTP TosetuptheFTPandEmailinActioninterface,theFTPserver andEmailwillreceivethecapturepicturewhenunlocking.If you choose HTTP mode, enter the URL format: http://http serverIPaddress/anyinformation
(suchashttp://192.168.35.48/mac=000).Thenyouwillcheck 19 CardSetting thisinformationwhichcapturesthenetworkpacket. ICKeyDoorNum:R27Acansupporttoconnect3relays Chooseoneandaddthevalidcardforunlock. IC Key Day: To choose the valid day for the card you added. ICKeyTimeSetupanaccuratevalidtimeforthecard. ICKeyName:Tosetupcorrespondingnameforthecard. IC Key Code: Place the card in the R27A RF Card Read area,thenclickObtainbutton.AfterR27Areadsthecard code, click Add, the card information will show in the DoorCardManagementlist. DoorCardManagement Validcardinformationwillshowinthelist.Userscantickthe currentcardinformationthendeleteoneorallinthelist. 4.4.10Action Sections EmailNotification Description SenderEmailAddress:Inputthesenderemailaddress ReceiverEmailAddress:Inputthereceiveremailaddress SMTPServerAddress:EntertheSMTPserverformat 20 FTPNotification SIPCallNotification SMTPUsername:EntertheSMTP SMTPpassword:Enterthesenderemailpassword EmailSubject:Enterthesubjectname. Emailcontent:Enterthecontentname. Email test: Click test to make sure the parameters you enterisright. FTPServer:EntertheFTPserveraddress. FTPUserName:EntertheFTPserverusername. FTP Password: Enter the corresponding FTP server password. FTP test: Click test to make sure the parameters you enterisright. When you enable SIP Call function of motion. Enter the number and name in the corresponding area. When the motion is triggered, the device will call out the number automatically. 21 4.5. Account 4.5.1Basic Sections SIPAccount SIPServer1 Description TodisplayandconfigurethespecificAccountsettings. Status:Todisplayregisterresult. DisplayName:Whichissenttotheothercallpartyfor display. RegisterName:AllocatedbySIPserverprovider,usedfor authentication. User Name: Allocated by your SIP server provide, used forauthentication. Password:Usedforauthorization. TodisplayandconfigurePrimarySIPserversettings. Server IP: SIP server address, it could be an URL or IP address. 22 SIPServer2 OutboundProxyServer TransportType NAT Registration Period: The registration will expire after IP phone will reregister Registration period, the automaticallywithinregistrationperiod. TodisplayandconfigureSecondarySIPserversettings. This is for redundancy, if registering to Primary SIP server fails, the IP phone will go to Secondary SIP server for registering. Note:SecondarySIPserverisusedforredundancy,itcanbe left blank if there is not redundancy SIP server in users environment. TodisplayandconfigureOutboundProxyserversettings. An outbound proxy server is used to receive all initiating request messages and route them to the designated SIP server. Note: If configured, all SIP request messages from the IP phonewillbesenttotheoutboundproxyserverforcefully. TodisplayandconfigureTransporttypeforSIPmessage UDP: UDP is an unreliable but very efficient transport layerprotocol. TCP:Reliablebutlessefficienttransportlayerprotocol. TLS:SecuredandReliabletransportlayerprotocol. DNSSRV: A DNS RR for specifying the location of services. To display and configure NAT(Net Address Translator) settings. STUN: Short for Simple Traversal of UDP over NATS, a solutiontosolveNATissues. Note:Bydefault,NATisdisabled. 23 4.5.2Advanced 24 Sections SIPAccount Codecs VideoCodec Subscribe DTMF Call Description TodisplaycurrentAccountsettingsortoselectwhichaccount todisplay. Todisplayandconfigureavailable/unavailablecodecslist. Codecmeanscoderdecoderwhichisusedtotransferanalog signaltodigitalsignalorviceversa. Familiar codecs are PCMU(G711U), PCMA(G711A), G722
(widebandthcodecs),G729andsoon. Toconfigurethevideoquality CodecName:ThedefaultvideocodecisH264. Codec Resolution: It can support QCIF, CIF, VGA, 4CIF, 720P. Codec Bitrate: The lowest bitrate is 128, the highest bitrateis2048. Codecpayload:From90119. TodisplayandconfigureMWI,BLF,ACDsubscriptionsettings. MWI: Message Waiting Indicator which is used to indicatewhetherthereisunreadnewvoicemessage. BLF: BLF is short for Busy Lamp Field which is used to monitorthedesignatedextensionstatus. ACD:AutomaticCallDistributionisoftenusedinoffices for customer service, such as call center. The setting hereistonegotiatewiththeserveraboutexpiretimeof ACDsubscription. TodisplayandconfigureDTMFsettings. Type: Support Inband, Info, RFC2833 or their combination. HowToNotifyDTMF:OnlyavailablewhenDTMFTypeis Info. DTMFPayload:ToconfigurepayloadtypeforDTMF. Note: By default, DTMF type is RFC2833 which is the standard. Type Inband uses inband frequency to indicate DTMF tone which is most used to be compatible to traditionaltelephoneserver.TypeInfouseSIPInfomessage toindicateDTMFmessage. Todisplayandconfigurecallrelatedfeatures. MaxLocalSIPPort:Toconfiguremaximumlocalsipport fordesignatedaccount. MinLocalSIPPort:Toconfigureminimumlocalsipport fordesignatedaccount. CallerIDHeader:ToconfigurewhichCallerIDformatto fetchfordisplayingonPhoneUI. AutoAnswer:Ifenabled,IPphonewillbeautoanswered 25 whenthereisanincomingcallfordesignatedaccount. Ringtones:Choosetheringtoneforeachaccount. Provisioning Response ACK: 100% reliability for all provisionalmessages,thismeansitwillsendACKevery time the IP phone receives a provisional SIP message fromSIPserver. User=phone:Ifenabled,IPphonewillsenduser=phone withinSIPmessage. PTime: Interval time between two consecutive RTP packets. Anonymous Call: If enabled, all outgoing call for the designatedaccountwillbeanonymousnumber. Anonymous Call Rejection: If enabled, all incoming anonymousout call for the designated account will be rejected. IsescapenonAsciicharacter:Totransferthesymbolto Asciicharacter. MissedCallLog:Todisplaythemisscalllog. PreventSIPHacking:EnabletopreventSIPfromhacking. Todisplayorconfiguresessiontimersettings. Active:Toenableordisablethisfeature,ifitisenabled, theongoingcallwillbedisconnectedautomaticallyonce thesessionexpiredunlessitsbeenrefreshedbyUACor UAS. SessionExpire:Configuresessionexpiretime. SessionRefresher:Itisusedtoconfigurewhoshouldbe respondedforrefreshingasession. Note: UAC means User Agent Client, here stands for IP phone. UAS means User Agent Server, here stands for SIP server. TodisplayorconfigureBLFListURIaddress. BLFListURI:BLFListisshortforBusyLampFieldList. BLFListPickUpCode:TosettheBLFpickupcode. BLFListBargeInCode:TosettheBLFbargeincode. ToenableordisabledSRTPfeature. Voice Encryption(SRTP): If enabled, all audio signal
(technicallyspeakingitsRTPstreams)willbeencrypted formoresecurity. TodisplayNATrelatedsettings. UDPKeepAlivemessage:Ifenabled,IPphonewillsend UDP keepalive message periodically to router to keep NATportalive. UDPAliveMsgInterval:Keepalivemessageinterval. Rport:RemotePort,ifenabled,itwilladdRemotePort 26 SessionTimer BLFList Encryption NAT UserAgent 4.6. Network 4.6.1Basic Sections LANPort intooutgoingSIPmessagefordesignatedaccount. One can customize User Agent field in the SIP message; if user agent is set to specific value, user can see the information from PCAP. If user agent is not set by default, users can see the company name, model number and firmwareversionfromPCAP Description TodisplayandconfigureLANPortsettings. DHCP: If selected, IP phone will get IP address, Subnet Mask, Default Gateway and DNS server address from DHCPserverautomatically. StaticIP:Ifselected,youhavetosetIPaddress,Subnet Mask,DefaultGatewayandDNSservermanually. 27 4.6.2Advanced Sections LocalRTP SNMP VLAN Description TodisplayandconfigureLocalRTPsettings. Max RTP Port: Determine the maximum port that RTP streamcanuse. StartingRTPPort:DeterminetheminimumportthatRTP streamcanuse. TodisplayandconfigureSNMPsettings. Active:ToenableordisableSNMPfeature. Port:ToconfigureSNMPserversport. TrustedIP:ToconfigureallowedSNMPserveraddress,it couldbeanIPaddressoranyvalidURLdomainname. Note: SNMP (Simple Network Management Protocols) is Internetstandard protocol for managing devices on IP networks. TodisplayandconfigureVLANsettings. Active:ToenableordisableVLANfeaturefordesignated port. VID:ToconfigureVLANIDfordesignatedport. Priority:ToselectVLANpriorityfordesignatedport. Note: Please consult your administrator for specific VLAN settingsinyournetworkingenvironment. 28 TR069 TodisplayandconfigureTR069settings. Active:ToenableordisableTR069feature. Version:ToselectsupportedTR069version(version1.0 or1.1). ACS/CPE:ACSisshortforAutoconfigurationserversas for Customerpremise is short server side, CPE equipmentasclientsidedevices. URL: ToconfigureURLaddressforACSorCPE. Username:ToconfigureusernameforACSorCPE. Password:ToconfigurePasswordforACSorCPE. PeriodicInform:Toenableperiodicallyinform. Periodic Interval: To configure interval for periodic inform. Note: TR069(Technical Report 069) technical specification entitled CPE WAN Management Protocol
(CWMP).It defines an application layer protocol for remote managementofenduserdevices. is a 4.7. Phone 4.7.1Time/Language Sections NTP Description ToconfigureNTPserverrelatedsettings. TimeZone:ToselectlocalTimeZoneforNTPserver. Primary Server: To configure primary NTP server address. Secondary Server: To configure secondary NTP server is if primary NTP server it takes effect address, unreachable. Update interval: To configure interval between two consecutiveNTPrequests. Note: NTP, Network Time Protocol is used to automatically 29 synchronized local time with INTERNET time, since NTP serveronlyresponseGMTtime,sothatyouneedtospecify theTimeZoneforIPphonetodecidethelocaltime. 4.7.2CallFeature Sections Description Mode DND Intercom Mode:Selectthedesiredmode. DND (Do Not Disturb) allows IP phones to ignore any incomingcalls. ReturnCodewhenDND:Determinewhatresponsecode shouldbesentbacktoserverwhenthereisanincoming callifDNDon. DND On Code: The Code is used to turn on DND on servers side, if configured, IP phone will send a SIP messagetoservertoturnonDNDonserversideifyou pressDNDwhenDNDisoff. DND Off Code: The Code is used to turn off DND on servers side, if configured, IP phone will send a SIP messagetoservertoturnoffDNDonserversideifyou pressDNDwhenDNDison. Intercom allows users to establish a call directly with the callee. Active:ToenableordisableIntercomfeature. 30 IntercomMute:Ifenabled,oncethecallestablished,the calleewillbemuted. ReturnCodeWhenRefuse:Allowsusertoassignspecific codeasreturncodetoSIPserverwhenanincomingcall isrejected. Auto Answer Delay: To configure delay time before an incomingcallisautomaticallyanswered. AutoAnswerMode:Tosetvideooraudiomodeforauto answerbydefault. DirectIP:DirectIPcallwithoutSIPproxy. Others 4.7.3Voice Sections MicVolume SpeakerVolume OpenDoorWarning RingBackUpload Description ToconfigureMicrophonevolume,from115.8bydefault. ToconfigureSpeakerVolume,from115,8bydefault. When the door is opened, users will hear that opendoor prompt voice. it, you wont hear the announcement. Duringthecalling,userwillheartheringbacktonebeforethe other party answer. User can upload the suitable RingBack If you disable 31 OpendoorToneUpload Tonebyyourselves.Pleasenotethefileformatandsize. Chooseasuitableopendoorwarningtonetoupload. Pleasenotthefileformatandsize. 4.7.4DialPlan Sections RulesManagement Rules RulesModify Description For easy management, users can export and import the replacerulefiledirectly.(Theexportfileformatis.tgz,users need to unzip it, then check the .XML file. The Import formatis.XML) AllowusertoselectReplaceruletodisplayoredit. Allowusertomodifyselectedrulesinformation,forreplace rule,youcanmodifyrelatedaccounts,prefixandreplace. Suchas:Account:1 Prefix:100 Replace:110 Then users dial 100 with account1, the phone will call out 110actually. 32 4.7.5Multicast Sections MulticastSetting PriorityList Description TodisplayandconfiguretheMulticastsetting. PagingBarge:Choosethemulticastnumber,therange is110. PagingpriorityActive:Enableodisablethemulticast. Tosetupthemulticastparameters. Listening Address: Enter the IP address you need to listen. LabelInputthelabelforeachlisteningaddress. 33 4.7.6Calllog Sections CallHistory Description Todisplaycallhistoryrecords. AvailablecallhistorytypesareAllcalls,Dialedcalls,Received calls,Missedcalls,Forwardedcalls. Userscancheckthecallhistoryindetail.Tickthenumberto deleteordeletealllogs.R27Asupports100calllogs. 34 4.7.7Doorlog Sections DoorLog 4.8. Upgrade 4.8.1Basic Description Todisplayunlockhistory.ThisinterfacecanonlyshowtheRF cardunlockhistorynow. Users can check the unlock information in detail. Users can deleteoneoralllogs.Themaximumdoorlogis500. Sections 35 Description Upgrade Firmwareversion HardwareVersion ResettoFactorySetting Reboot To select upgrading zip file from local or a remote server automatically. Note:Pleasemakesureitsrightfileformatforrightmodel. To display firmware version, firmware version starts with MODELname. TodisplayHardwareversion. ToenableyoutoresetIPphonessettingtofactorysettings. TorebootIPphoneremotelyfromWebUI. 4.8.2Advanced 36 Sections PNPOption ManualAutop AutomaticAutop SystemLog Description TodisplayandconfigurePNPsettingforAutoProvisioning. PNP: Plug and Play, once PNP is enabled, the phone will sendSIPsubscriptionmessagetoPNPserverautomatically togetAutoProvisioningserversaddress. By default, this SIP message is sent to multicast address 224.0.1.75(PNPserveraddressbystandard). Todisplayandconfiguremanualupdateserverssettings. URL:Autoprovisioningserveraddress. User name: Configure if server needs a username to access,otherwiseleftblank. Password:Configureifserverneedsapasswordtoaccess, otherwiseleftblank. CommonAESKey:UsedforIPphonetodeciphercommon AutoProvisioningconfigurationfile. AES Key for
(MAC): Used to decipher MACoriented auto provisioning configuration file(for example,filenamecanbe0c1105888888.cfgifIPphones MACaddressis0c1105888888). IP phone Note: AES is one of many encryption, it should be configure onlyconfigurefileiscipheredwithAES,otherwiseleftblank. TodisplayandconfigureAutoProvisioningmodesettings. ThisAutoProvisioningmodeisactuallyselfexplanatory. Forexample,modePoweronmeansIPphonewillgotodo Provisioningeverytimewhenitpowerson. Todisplaysystemloglevelandexportsystemlogfile. System log level: From level 0~7.The higher level means themorespecificsystemlogissavedtoatemporaryfile. Bydefault,itslevel3. Export Log: Click to export temporary system log file to localPC. 37 4.9. Security 4.9.1Basic Sections Description WebPasswordModify Tomodifyuserspassword. CurrentPassword:Thecurrentpasswordyouused. NewPassword:Inputnewpasswordyouintendtouse. ConfirmPassword:Repeatthenewpassword. 38
This product uses the FCC Data API but is not endorsed or certified by the FCC