Anker Innovations Limited Date: 01/10/2019 To: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD FCC ID: 2AOKB-A2570 To Whom It May Concern:
This letter is to ascertain that Anker Innovations Limited Product PowerWave Pad with Watch Holder 2AOKB-A2570, has been the units used for conducting FCC compliance testing, and it meets KDB 680106 Clause 5(2) all 6 conditions . 1 Power transfer frequency is less that 1 MHz 2 Output power from each primary coil is 15 watts 3 The transfer system includes only single primary and secondary coils. This includes charging systems that may have multiple primary coils and clients that are able to detect and allow coupling only between individual pairs of coils. 4 Client device is placed directly in contact with the transmitter. 5 Mobile exposure conditions only (portable exposure conditions are not covered by this exclusion). 6 The aggregate H-field strengths at 15 cm surrounding the device and 20 cm above the top surface from all simultaneous transmitting coils are demonstrated to be less than 50% of the MPE limit. If you have any question or concerns, pls. contact us. Sincerely, Clients signature louis Qi/Manager Company Name: Anker Innovations Limited Address: Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hongkong