AR7516VW Broad Band Router User Manual

 

User Manual Nfiniti High Power Giga Broadband ADSL2+ Modem Router WBMR-HP-G300H www.buffalotech.com 35011697 ver.01 Contents Chapter 1 - Product Overview .........................................5 Features .................................................................................. 5 Air Navigator CD Requirements .............................................. 6 300 Mbps High Speed Mode ................................................... 6 Package Contents ................................................................... 7 Hardware Overview ................................................................. 8 Front Panel LEDs / Back Panel ..................................................... 8 Top ................................................................................................. 10 Bottom ............................................................................................ 11 Right Side ...................................................................................... 11 Chapter 2 - Placing Your AirStation ................................12 Vertical Placement .................................................................. 12 Horizontal Placement .............................................................. 13 Wall-Mounting ......................................................................... 14 Chapter 3 - Installation .....................................................15 Automatic Setup ...................................................................... 15 Manual Setup .......................................................................... 15 Gathering Information ............................................................. 18 Chapter 4 - Configuration ................................................20 How to Access the Web-Based Configuration Utility ............... 20 Configuration Utility Menus in Router Mode ............................ 22 Configuration Utility Menus in Bridge Mode ............................ 24 Setup ....................................................................................... 26 Internet/LAN (LAN Config) ...................................................... 28 WBMR-HP-G300H User Manual 1 ADSL .............................................................................................. 28 DDNS (Router Mode only) ............................................................. 31 VPN server (Router Mode Only) .................................................... 33 LAN ................................................................................................ 35 DHCP Lease (Router Mode only) .................................................. 37 NAT (Router Mode only) ................................................................ 38 Route ............................................................................................. 39 Wireless Config ....................................................................... 40 WPS ............................................................................................... 40 AOSS ............................................................................................. 41 Basic .............................................................................................. 43 Advanced ....................................................................................... 47 WMM .............................................................................................. 48 MAC Filter ...................................................................................... 50 Multicast Control ............................................................................ 51 Security (Router Mode only) ................................................... 52 Firewall (Router Mode only) ........................................................... 52 IP Filter (Router Mode only) ........................................................... 54 VPN Pass Through (Router Mode only) ........................................ 55 LAN Config (QoS) ................................................................... 56 Port Forwarding (Router Mode only) .............................................. 56 DMZ (Router Mode only) ............................................................... 58 UPnP (Router Mode only) .............................................................. 59 QoS (Router Mode only) ................................................................ 60 Movie Engine ................................................................................ 62 NAS ......................................................................................... 64 Disk management .......................................................................... 64 Shared Folder ................................................................................ 66 User Management ......................................................................... 68 Shared Service .............................................................................. 69 Web Access ................................................................................... 70 Media Server .................................................................................. 72 BitTorrent ........................................................................................ 73 WBMR-HP-G300H User Manual 2 Admin Config ........................................................................... 75 Name ............................................................................................. 75 Password ....................................................................................... 76 Time/Date ...................................................................................... 77 NTP ................................................................................................ 78 ECO ............................................................................................... 79 Network-USB ................................................................................. 81 Access ........................................................................................... 82 Log ................................................................................................. 83 Save/Restore ................................................................................. 84 Initialize/Restart ............................................................................. 85 Update ........................................................................................... 86 Diagnostic ............................................................................... 87 System Info .................................................................................... 87 Logs ............................................................................................... 89 Packet Info ..................................................................................... 90 Client Monitor ................................................................................. 91 Ping ................................................................................................ 92 DSL Connection (Router Mode only) ............................................. 93 Chapter 5 - Connect to a Wireless Network ...................94 Automatic Secure Setup (AOSS/WPS) ................................... 94 Windows 7/Vista (Client Manager V) ............................................. 95 Windows XP (Client Manager 3) .................................................... 96 Other Devices (e.g. Game Console) .............................................. 96 Manual Setup .......................................................................... 97 Windows 7 (WLAN AutoConfig) ..................................................... 97 Windows Vista (WLAN AutoConfig) ............................................... 98 Windows XP (Wireless Zero Configuration) ................................... 101 Mac OS X (AirPort) ........................................................................ 102 Chapter 6 - Trouble Shooting ..........................................103 WBMR-HP-G300H User Manual 3 Cannot connect to the Internet over wired connection. .......... 103 Cannot access the web-based configuration utility. ............... 103 Cannot connect to the network wirelessly. ............................. 104 You forgot AirStations SSID, Encryption Key, or Password. .. 104 The link speed is slower than 300 Mbps (Maximum link speed is only 144 Mbps). ...................................................................... 104 Other Tips ................................................................................ 105 Appendix A - Specifications ............................................107 Appendix B - Default Configuration Settings ................109 Appendix C - Network-USB Navigator ............................116 Appendix D - TCP/IP Settings ..........................................126 Appendix E - Restoring the Default Configuration ........130 Appendix F - Shared Folders and the USB Port ............131 Appendix G - Regulatory Compliance Information .......133 Appendix H - Environmental Information .......................138 Appendix I - GPL Information ..........................................139 Appendix J - Warranty Information .................................140 WBMR-HP-G300H User Manual 4 Chapter 1 - Product Overview Features Supports IEEE802.11n and IEEE802.11b/g With support for current Wireless-N, Wireless-G, and Wireless-B standards, the AirStation can transfer data to and from all standard 2.4 GHz wireless clients. Dual speed mode Dual speed mode makes wireless transmission faster by using 2 channels, allowing 300 Mbps data transmission. Support AOSS and WPS Both AOSS (AirStation One-touch Secure System) and WPS (Wi-Fi Protected Setup) are supported. These automatic connection standards make connection with compatible wireless devices easier. Security Features The AirStation is equipped with following security features:

AOSS WPS WPA-PSK (TKIP/AES) WPA2-PSK(TKIP/AES) WPA/WPA2 mixed PSK WEP(128/64bit) Privacy Separator MAC address access restriction Deny Any Connection/SSID stealth feature Setting screen with password Firewall feature with easy rules Automatic Channel Selection Monitors wireless interference and automatically assigns the clearest, best channel. Roaming You can use multiple AirStations to cover a large area. Wireless clients can automatically switch AirStations for the best signal. WBMR-HP-G300H User Manual 5 Chapter 1 Product Overview Initialization To restore settings back to the factory defaults, hold down the Reset button on the bottom of the unit. Browser Based Administration This unit can be easily configured from a web browser on your computer. MovieEngine MovieEngine uses QoS to optimise your network for mutimedia streaming. This can reduce jumps, distorted audio, and dropped frames while watching streamed video. NAS (Network Attached Storage) Attach a USB hard drive to the AirStation and share it on the network as a NAS. All connected clients can access it. Gigabit Ethernet This unit supports Gigabit Ethernet, allowing transmission rates of up to a billion bits per second. Air Navigator CD Requirements The AirStation wireless router and access point works with most wired and wireless devices. However, the automatic installation program on the CD requires a connected Windows 7, Vista or XP computer to run. If you use the AirStation with a different operating system, you will have to configure your network settings manually from a browser window. 300 Mbps High Speed Mode 300 Mbps is the link speed when using Wireless-N mode. It represents actual wireless data speeds, including overhead. Because the overhead is not available for user data transfer, usable wireless throughput will be substantially slower. WBMR-HP-G300H User Manual 6 Chapter 1 Product Overview Package Contents The following items are included in your AirStation package. If any of the items are missing, please contact your vender. WBMR-HP-G300H ........................................................................................................................ 1 Detachable antenna................................................................................................................... 2 AC adapter ..................................................................................................................................... 1 Stand for vertical/horizontal/wall-mounting .................................................................... 1 Screws for wall-mounting ........................................................................................................ 2 LAN cable ....................................................................................................................................... 1 Air Navigator CD .......................................................................................................................... 1 Quick Setup Guide ...................................................................................................................... 1 WBMR-HP-G300H User Manual 7 Chapter 1 Product Overview Hardware Overview Front Panel LEDs / Back Panel 1 2 4 6 7 8 3 5 9 10 12 14 11 13 15 1 AOSS Button To initiate AOSS, hold down this button until the Security LED flashes (about 1 second). Then, push or click the AOSS button on your wireless client device to complete the connection. Both devices must be powered on for this to work. The AC adapter is connected. The AC adapter is not connected. 2 Power LED On (Green) :

Off (Green) :

Shows AirStation status. 2 blinks (Red) *1 :

3 blinks (Red) *1 : Wired Ethernet LAN error. 4 blinks (Red) *1 : Wireless LAN error. 5 blinks (Red) *1 :

Flash ROM error. Network error. WBMR-HP-G300H User Manual 8 Chapter 1 Product Overview 9 blinks (Red) *1 :

Continuously blinking (Red) *2 :

*1

*2 System error. Updating firmware, saving settings, or initializing settings. Turn off AirStation first, wait for a few seconds, then turn it back on. If the Power LED keeps blinking, do not turn off the AirStation nor unplug its power cable. 3 Security LED (Amber) Indicates security status. Off :

On :

AOSS or Encryption is not set. AOSS/WPS activated; accessed to exchange security keys. Encryption has been set. The unit is waiting for an AOSS or WPS security key. AOSS/WPS error; failed to exchange security keys. 2 blinks :

Blinking :

Note : The Security LED is lit if an encryption key has been set. 4 Wireless LED (Green) Indicates wireless LAN status. On :

Off :

Wireless LAN is transmitting. Wireless LAN is not active. 5 DSL LED (Green) Indicates DSL status. On :

The DSL port is connected. 6 Internet LED Indicates Internet status. On (Green) :

Blinking (Green) : Communicating over Internet On (Red) :

Off :

Not connected to Internet Operating in bridge mode Connected to Internet 7 Movie Engine LED (Blue) Indicates Movie Engine status. On :

Off :

Movie Engine functionality is enabled. Movie Engine functionality is disabled. 8 Movie Engine Switch Switches the movie engine function between enabled and disabled. On :

Off :

Movie Engine functionality is enabled. Movie Engine functionality is disabled. WBMR-HP-G300H User Manual 9 Chapter 1 Product Overview 9 DC Connector Connect the included AC adapter here. 10 LAN Port Connect your computer, hub, or other Ethernet devices to these ports. This switching hub supports 10 Mbps, 100 Mbps, and 1000 Mbps connections. 11 LAN LED (Green) On :

Blinking :

An Ethernet device is connected. An Ethernet device is communicating. 12 USB Eject Button To dismount a USB hard drive, hold down this button until the USB LED flashes (about 3 seconds). The USB drive can then be unplugged safely. 13 USB LED (Green) On :

Blinking :

Off :

Note : Never disconnect the USB disk or turn off the unit, while the USB LED lights up. The USB disk is connected. The USB disk can be removed. The USB disk is not connected. 14 USB Port Connect the USB drive. Note : Refer to the technical restriction on page 129. 15 DSL Port Connect your ADSL line to this port. Top 16 16 Antenna connector Screw on the antennas here. WBMR-HP-G300H User Manual 10 Chapter 1 Product Overview Bottom 17 17 Reset Button Right Side To reset all settings, hold down this button until the Power LED comes on

(about 3 seconds). Power must be on. 18 Note: The right side of the unit may become hot. Please be careful not to place anything next to it that could be damaged by heat. 18 Factory Default Settings This sticker shows the AirStations SSID, default encryption key, and WPS PIN code. By default, encryption is disabled for AirStations sold in Asia Pacific. WBMR-HP-G300H User Manual 11 Chapter 2 - Placing Your AirStation Antenna Placement The antennas are included in the package. Screw the antennas clockwise to install. Vertical Placement If the AirStation is to be placed vertically, attach the stand as shown. WBMR-HP-G300H User Manual 12 Chapter 2 Placing Your AirStation Horizontal Placement When installing the AirStation horizontally, be sure to attach the stand for enabling heat dissipation. 1 2 Attach the stand as shown in the figure. Install horizontally. WBMR-HP-G300H User Manual 13 Chapter 2 Placing Your AirStation Wall-Mounting 1 FRONT To wall-mount the AirStation, attach the stand to the wall with the two screws (included). 8.6 cm

(~3.4 inches) 2 Snap the center of the AirStation to the stand as shown. WBMR-HP-G300H User Manual 14 Chapter 3 - Installation Automatic Setup The AirNavigator CD can step you through installing your AirStation. To step through the setup program, insert the CD into your Windows 7/Vista/XP PC and follow the instructions on the screen. If your computer uses a different operating system, use manual setup instead. Note:

To use a wireless client in Windows 7 or Vista, perform setup using the AirNavigator CD to automatically generate a profile for wirelessly connecting to the AirStation. After setup is complete, once the LAN cable is removed, you can connect from your wireless client to the AirStation. Before performing setup, make the settings to enable the wireless client of the computer. Manual Setup To configure your AirStation manually, follow the procedure below. 1 2 Power off your computers and networking equipment. Connect your computer to one of the LAN ports on the rear of the AirStation with the supplied Ethernet network cable. WBMR-HP-G300H User Manual 15 Chapter 3 Installation 3 Connection for the AirStation to the ADSL line varies by country and region. Typically it involves a microfilter or a microfilter with built-in splitter to allow simultaneous use of ADSL service and telephone service on the same telephone line. Please read the following steps carefully and select the appropriate method. If your telephone service and ADSL service are on the same telephone line, ADSL microfilters are needed for each telephone and device, such as answering machine, fax machine, and caller ID display. Additional splitters may be used to separate telephone lines for telephone and Router. Note: Do not connect the ADSL microfilter between the wall jack and the Routerthis will prevent ADSL service from reaching the modem. If your telephone service and ADSL service are on the same telephone line and you are using an ADSL microfilter with built-in splitter, connect the splitter to the telephone wall jack providing ADSL service. Then, connect the telephone cord from the ADSL microfilter RJ11 port generally labelled DSL to the gray RJ11 port labelled DSL line on the back of your Router. Connect the telephony device to the other port on the ADSL splitter commonly labelled Phone. Note: An RJ11 telephone cord is supplied. When inserting an RJ11 plug, be sure the tab on the plug clicks into position correctly. If you have a dedicated ADSL service telephone line with an RJ11 wall jack, simply connect a telephone cord from the wall jack to the DSL port on the back of the AirStation. If you have an RJ45 wall jack for your ADSL service, connect an RJ45-to-RJ11 converter to the wall jack. Then connect one end of the telephone cord to the converter and the other end to the DSL port on the back of the AirStation. 4 Connect your computer to one of the AirStations LAN ports with the LAN cable. AirStation 1) connect 2) connect OFF LAN cable computer WBMR-HP-G300H User Manual 16 Chapter 3 Installation 5 6 7 Turn on the AirStation, wait one minute, and then turn on your computer. 1) Connect the power supply AirStation power outlet ON computer Once your computer has booted, the AirStations LEDs should be lit as described below:

POWER WIRELESS DSL INTERNET LAN Green light on. Green light on or blinking. Green light on or off depending on your network. Green light on. Green light on or blinking. For LED locations, refer to chapter 1. Launch a web browser. If the [home] setup screen is displayed, setup is complete. If a user name and password screen is displayed, enter [root] (in lower case) for the user name, leave the password blank, and click [OK]. Step through the wizard to complete setup. Youve completed initial setup of your AirStation. Refer to Chapter 4 for advanced settings. WBMR-HP-G300H User Manual 17 Chapter 3 Installation Gathering Information Most DSL providers require PPPoE or PPPoA details to log in to your connection. You must call your ISPs Technical Support number to obtain the following information:

Username : This is the Username that is used to log onto your ADSL service providers network. It is commonly in the form user@isp.com. Password : This is the Password that is used, in conjunction with the Username above, to log on to your ADSL service providers network. Connection Protocol : This is the method that your ADSL service provider uses to send and receive data between the Internet and your computer. VPI : This is the Virtual Path Identifier (VPI). It is used in conjunction with the Virtual Channel Identifier (VCI) below, to identify the data path between your ADSL service providers network and your computer. VCI : This is the Virtual Channel Identifier (VCI). It is used in conjunction with the VPI above to identify the data path between your ADSL service providers network and your computer. Note : This information should be stored and kept to hand as it will be required to enable you to establish an internet connection. The table below is a quick reference guide for configuring your ADSL Internet connection. You may try the settings for the ISPs shown. Country Encapsulation VPI / VCI Multi plexing ISPs France RFC2516 PPPoE RFC2516 PPPoE RFC2364 PPPoA Germany RFC2516 PPPoE 8/35 8/67 8/35 1/32 LLC LLC VC LLC Various T-Online, Various WBMR-HP-G300H User Manual 18 Chapter 3 Installation Country Encapsulation VPI / VCI Multi plexing ISPs Holland RFC1483 Bridged RFC2364 PPPoA RFC2364 PPPoA RFC2516 PPPoE Belgium RFC2364 PPPoA Lreland RFC2516 PPPoE Italy Spain RFC2516 PPPoE RFC2516 PPPoE Sweden RFC1483 Bridged UK RFC2364 PPPoA 0/35 0/32 0/34 8/48 0/32 8/35 8/35 8/35 8/35 8/32 3/35 0/38 LLC VC VC LLC LLC LLC VC LLC LLC VC BBNed, XS4all Versatel, DHCP Baby XL, Tiscali. (start/Surf/

Family/Live) KPN, Hetnet, HCCNet, Tiscali (lite/

Basis/Plus), Wanadoo Versatel PPP, Zonnet Various Belgacom, Tiscali, Scarlet Eircom, BT, Digiweb, Irish Broadband TIN Telefonica Telia BT, Freeserve, Tiscali, AOL WBMR-HP-G300H User Manual 19 Chapter 4 - Configuration The web-based configuration tool lets you change advanced settings for the AirStation. Dont change these settings unless you know what youre doing. How to Access the Web-Based Configuration Utility To configure the AirStations advanced settings manually, log in to the web-based configuration utility as shown below. 1 2 3 Launch a web browser. Enter the AirStations LAN-side IP address in the address field, and press the [Enter] key. Note:

The AirStations default LAN-side IP address is 192.168.11.1. If you changed the IP address of the AirStation, then use the new IP address. When this screen appears, enter [root]

(in lower case) for the user name and the password that you set during initial setup. Click [OK]. Note:

By default, the password is blank (not set). If you forget your password, hold down the Reset button (page 11) to initialize all settings. The password will then be blank. Note that all other settings will also revert to their default values. WBMR-HP-G300H User Manual 20 Chapter 4 Configuration 4 This is the configuration utility, where most AirStation settings can be configured. Help is always displayed on the right side of each screen. Refer to the Help screens for more information on using the configuration utility. WBMR-HP-G300H User Manual 21 Chapter 4 Configuration Configuration Utility Menus in Router Mode The menu structure for the AirStation in router mode is as follows. Please refer to the pages listed at right for explanations of each item. Main screen Descriptions Internet/LAN ADSL DDNS VPN Server LAN DHCP Lease NAT Route Wireless Config WPS AOSS Basic Advanced WMM MAC Filter Multicast Control Security Firewall IP Filter VPN Passthrough LAN Config Port Forwarding DMZ UPnP QoS Movie Engine Configure DSL port and settings. DNS settings. VPN server settings. LAN side port configuration. DHCP lease settings. Network address translation settings, used to connect LAN side devices to the Internet. Configure the AirStations IP communication route. WPS settings and status. AOSS (AirStation One-touch Secure System) settings and status. Configure basic wireless settings. Configure advanced wireless settings. Set priorities for Wireless Multimedia Extensions (Wi-Fi Multimedia). Limit access to specific devices. Configure limits on sending unnecessary multicast packets to the wireless LAN port. Page 52 Protect your computer from outside intruders. IP filters for packets passing through the LAN side and the Internet side. Page 54 Configure IPv6 passthrough, PPPoE passthrough, and PPTP passthrough. Page 55 Configure port translation and exceptions for games and other programs. Configure a destination to transfer communication packets without a LAN side destination. Configure UPnP (Universal Plug and Play). Configure priority for packets that require a guaranteed data flow. Configure options for the Movie Engine feature. Page Page 28 Page 31 Page 33 Page 35 Page 37 Page 38 Page 39 Page 40 Page 41 Page 43 Page 47 Page 48 Page 50 Page 51 Page 56 Page 58 Page 59 Page 60 Page 62 22 WBMR-HP-G300H User Manual Chapter 4 Configuration NAS Disk management Shared Folder User Management Shared Service Web Access Media Server BitTorrent Admin Config Name Password Time/Date NTP View the status and configure of attached USB disks. Set the USB disk to use as shared folders. Configure users to access shared folders. Configure shared folder access. Configure Web Access. Configure a Media Server. Configure a BitTorrent client. Configure the AirStations name. Configure the AirStations login password for access to the configuration utility. Configure the AirStations internal clock. Configure the AirStation to synchronize with an NTP server to automatically set the AirStations internal clock. Configure the AirStations ECO Mode. Configure Network-USB from this screen. Configure access restrictions to the AirStations configuration screens. Configure a syslog server to manage the AirStations logs. Save or restore the AirStations configuration from a configuration file. Initialize the AirStation or reboot it. Update the AirStations firmware. ECO Network-USB Access Log Save/Restore Initialize/Restart Update Diagnostic System Info Logs Packet Info Client Monitor Ping DSL Connection Logout Click this to log out of the AirStations configuration screens. View current system information for the AirStation. Check the AirStations logs. View all packets transferred by the AirStation. View all devices currently connected to the AirStation. Test the AirStations connection to other devices on the network. View DSL Connection for the AirStation. Page 64 Page 66 Page 68 Page 69 Page 70 Page 72 Page 73 Page 75 Page 76 Page 77 Page 78 Page 79 Page 81 Page 82 Page 83 Page 84 Page 85 Page 86 Page 87 Page 89 Page 90 Page 91 Page 92 Page 93 WBMR-HP-G300H User Manual 23 Chapter 4 Configuration Configuration Utility Menus in Bridge Mode The menu structure in bridge mode is as follows. Please refer to the pages listed at right for explanations of each item. Main screen LAN Config ADSL LAN Route Wireless Config WPS AOSS Basic Advanced WMM MAC Filter Multicast Control QoS Movie Engine NAS Disk management Shared Folder User Management Shared Service Web Access Media Server BitTorrent Admin Config Name Password Time/Date NTP Descriptions Configure DSL port and settings. LAN side port configuration. Configure the AirStations IP communication route. WPS settings and status. AOSS (AirStation One-touch Secure System) settings and status. Configure basic wireless settings. Configure advanced wireless settings. Set priorities for Wireless Multimedia Extensions (Wi-Fi Multimedia). Limit access to specific devices. Configure limits on sending unnecessary multicast packets to the wireless LAN port. Configure options for the Movie Engine feature. View the status and configure of attached USB disks. Set the USB disk to use as shared folders. Configure users to access shared folders. Configure shared folder access. Configure Web Access. Configure a Media Server. Configure a BitTorrent client. Configure the AirStations name. Configure the AirStations login password for access to the configuration utility. Configure the AirStations internal clock. Configure the AirStation to synchronize with an NTP server to automatically set the AirStations internal clock. WBMR-HP-G300H User Manual Page Page 28 Page 35 Page 39 Page 40 Page 41 Page 43 Page 47 Page 48 Page 50 Page 51 Page 62 Page 64 Page 66 Page 68 Page 69 Page 70 Page 72 Page 73 Page 75 Page 76 Page 77 Page 78 24 Chapter 4 Configuration Configure the AirStations ECO Mode. Configure Network-USB from this screen. Configure access restrictions to the AirStations configuration screens. Configure a syslog server to manage the AirStations logs. Save or restore the AirStations configuration from a configuration file. Initialize the AirStation or reboot it. Update the AirStations firmware. ECO Network-USB Access Log Save/Restore Initialize/Restart Update Diagnostic System Info Logs Packet Info Client Monitor Ping Logout Click this to log out of the AirStations configuration screens. View current system information for the AirStation. Check the AirStations logs. View all packets transferred by the AirStation. View all devices currently connected to the AirStation. Test the AirStations connection to other devices on the network. Page 79 Page 81 Page 82 Page 83 Page 84 Page 85 Page 86 Page 87 Page 89 Page 90 Page 91 Page 92 WBMR-HP-G300H User Manual 25 Chapter 4 Configuration Setup Setup is the home page of the configuration utility. You can verify settings and the status of the AirStation here. Parameter Meaning Internet/LAN (LAN Config) Displays the configuration screen for the Internet port and LAN ports. Wireless Config Security LAN Config Click this button to display the configuration screen for wireless settings. Click this button to display the configuration screen for security. Click this button to display the configuration screen to open ports for games and applications. WBMR-HP-G300H User Manual 26 Chapter 4 Configuration Parameter NAS Admin Config Diagnostic Easy Setup Meaning Click this button to display the configuration screen for NAS settings. Click this button to display the configuration screen for administration settings. Click this button to display the status of the AirStation. Enables you to easily configure the AirStations network settings automatically. Internet Information Displays WAN-side system information for the AirStation. WIRELESS AOSS Setup WPS Setup ECO Mode Displays the current wireless settings. Click this button to display the AOSS configuration screen. Click this button to display the WPS configuration screen. Displays the status of the ECO mode. Network Service List Displays the list of the network devices for which information is provided from the network on the LAN-side. Media Server Download List Language Logout Displays the status of the media server. Displays the list of BitTorrent files downloading. Enables you to select the language you use. Log out from the configuration screen of the AirStation. If the AirStation does not communicate for 5 minutes, it will log out automatically. WBMR-HP-G300H User Manual 27 Chapter 4 Configuration Internet/LAN (LAN Config) ADSL The ADSL (Asymmetric Digital Subscriber Line) settings are made here. For details on the settings, refer to the documentation provided by your ADSL provider. WBMR-HP-G300H User Manual 28 Chapter 4 Configuration Parameter Encapsulation Meaning Set the ADSL communication method. Obtain an IP Address Automatically(DHCP)/Use this IP Address This option is displayed when RFC1483 Bridged is selected in the Encapsulation field. Select whether the IP address, subnet mask, gateway, and DNS are obtained automatically or manually. IP Address Subnet Mask Set the IP address of the AirStation. Set the Internet subnet mask of the AirStation. Default Gateway Set the DNS server address specified by the provider. Address of DNS Name Server Set the DNS server address specified by the provider. Service Name User Name Password Connect on Demand/Keep Alive Set the service name specified by the provider in 64 or less single-

byte alphanumeric characters. Set the user name (PPP login name) specified by the provider in 64 or less single-byte alphanumeric characters and symbols. If the name specified by the provider contains an @ mark, the characters after the @ mark cannot be omitted when entering the User Name. Set the password specified by the provider in 64 or less single-byte alphanumeric characters and symbols. Select the Connect on Demand or Keep Alive. When Connect on Demand is selected, the AirStation is automatically connected to the server only when communication is performed. The connection is disconnected if the communication is not performed for a preset time (disconnect time). Set the disconnect time in the range from 1 to 9999 minutes. When Keep Alive is selected, the AirStation issues an LCP echo request to the server periodically at preset time intervals, and the response received from the server is used to confirm that communication is enabled. If no response from the server is received, the AirStation assumes that the line is disconnected, and it disconnects the connection. Set the Keep Alive time interval in the range from 20 to 180 seconds. Host Name Set the host name that is sent to the server when acquiring the IP address from the Internet. WBMR-HP-G300H User Manual 29 Chapter 4 Configuration Parameter Domain Name MTU Modulation Multiplexing QoS Type PCR Rate SCR Rate Auto Detect Meaning Set the domain name. Set the MTU (Maximum Transmission Unit) that is used in communication. Select from Auto or Manual. When set to Manual, the available range is set from 576 to 1500 bytes. Set the modulation system used in ADSL communication. Set the encapsulation system for VC multiplexing. Select from LLC (Logical Link Control Encapsulation) which can handle multiple protocols or VC (Circuit Circuit) for a single protocol. Set the QoS (Quality of Service). Select from the three service categories (UBR, CBR, VBR) where the QoS is guaranteed in the band. Set the PCR (Peak Cell Rate) when CBR or VBR is selected for QoS Type. The network upper limit transfer speed is set in the range from 1 to 65534 cps. Set the SCR (Sustainable Cell Rate) when CBR or VBR is selected for QoS Type. The network sustainable transfer speed is set in the range from 1 to 65534 cps. Set to VPI (Virtual Path Identification) or VCI (Virtual Channel Identification) of the virtual circuit when Disable is selected for Auto Detect. Virtual Circuit Set automatic detection of the virtual circuit. WBMR-HP-G300H User Manual 30 Chapter 4 Configuration DDNS (Router Mode only) Configure Dynamic DNS settings. Many settings are only available when the appropriate Dynamic DNS service is enabled. Parameter Meaning Dynamic DNS Service Select a provider (DynDNS or TZO) for Dynamic DNS. User Name Password Host Name Email Address TZO Key Domain Name Enter the Dynamic DNS user name. You may enter up to 64 alphanumerical characters and symbols. Enter the Dynamic DNS password. You may enter up to 64 alphanumerical characters and symbols. Enter the Dynamic DNS host name. You may enter up to 255 alphanumerical characters, hyphens, and periods. Enter the email address which is registered to the Dynamic DNS service. You may enter up to 64 alphanumerical characters and symbols. Enter the TZO Key which is registered to the Dynamic DNS service. You may enter up to 64 alphanumerical characters and symbols. Enter the domain name which is registered to the Dynamic DNS service. You may enter up to 255 alphanumerical characters, hyphens, and periods. WBMR-HP-G300H User Manual 31 Chapter 4 Configuration Parameter Meaning IP Address Update Period Specifies the period to notify the dynamic DNS service provider of the current IP address. For DynDNS, set it between 0 and 35 days. For TZO, set it between 0 and 99 days. If 0 (zero) days is set, no periodic update is performed. Internet Side IP Address The WAN-side IP address of the AirStations Internet port. This address is sent to the dynamic DNS service provider. Domain Name The domain name assigned by the dynamic DNS Service provider. The AirStation can be accessed from the Internet using this domain name. Status Display the status of dynamic DNS service. WBMR-HP-G300H User Manual 32 Chapter 4 Configuration VPN server (Router Mode Only) Configure the VPN server. WBMR-HP-G300H User Manual 33 Chapter 4 Configuration Parameter Auto Input Meaning Click to generate a random IP address. LAN Side IP Address Set a LAN side IP address and subnet mask. DHCP Server DHCP IP Address Pool PPTP Server Authorization Type Server IP Address Client IP Address DNS Server IP Address WINS Server IP Address Enable or disable the DHCP server, which assigns IP addresses automatically. Configure the range of IP addresses to be assigned by the DHCP server and IP addresses to be excluded from that range. Values from 0-253 may be entered. Enable to use a PPTP server. Select the authentication method for PPTP connection. Select the server IP address. Select the IP address range. Set the DNS server IP address for the DHCP server to issue to clients. Set the WINS server IP address for the DHCP server to issue to clients.

[Edit User Information]

Click to edit user information. User Name Password Enter the user name to connect to the PPTP server. You may enter up to 16 alphanumerical characters and symbols. Enter the password to connect to the PPTP server. You may enter up to 16 alphanumerical characters and symbols. Method of Acquiring IP Address Select the method to be used to assign the IP address is assigned to the PPTP client. PPTP User List Displays the PPTP connection user information. WBMR-HP-G300H User Manual 34 Chapter 4 Configuration LAN Configure LAN-side settings. Parameter LAN Side IP Address Meaning By default, the LAN side IP address is 192.168.11.1 with subnet mask 255.255.255.0. You may change it here. WBMR-HP-G300H User Manual 35 Chapter 4 Configuration Parameter Meaning DHCP Server Function DHCP IP Address Pool LAN Side IP Address

(For IP Unnumbered) Enable or disable the DHCP server, which assigns LAN-side IP addresses automatically. Configure the range of IP addresses to be assigned by the DHCP server and IP addresses to be excluded from that range. Values from 0-253 may be entered. Set an IP unnumbered LAN side IP address. Note: A PC with a normal LAN side IP address and a PC with an IP Unnumbered IP address cannot communicate each other. Advanced Settings Check [Display] to display DHCP server advanced settings options. Lease Period Default Gateway DNS Servers

* Router Mode only WINS Server

* Router Mode only Domain Name

* Router Mode only Default Gateway

* Bridge Mode only DNS Server Address

* Bridge Mode only Set the effective period of an IP address assigned by the DHCP server. Up to 999 hours may be entered. Set the default gateway IP address for the DHCP server to issue to clients. Set the DNS server IP address for the DHCP server to issue to clients. Set the WINS server IP address for the DHCP server to issue to clients. Set the domain name for the DHCP server to issue to clients. You may enter up to 127 alphanumerical characters, hyphens, and periods. Set the default gateway IP address. Set the DNS server IP address. WBMR-HP-G300H User Manual 36 Chapter 4 Configuration DHCP Lease (Router Mode only) Configure DHCP Exceptions. Parameter IP Address Meaning Enter an IP address to lease manually. The IP address should be from the same subnet as the DHCP scope, but not be within the range that DHCP is assigning to other devices. MAC Address Enter the MAC address which identifies the client. Current DHCP Client Information Displays information for current leases. An IP address which is leased automatically can be changed to be leased manually by clicking [Manual Assignment]. WBMR-HP-G300H User Manual 37 Chapter 4 Configuration NAT (Router Mode only) Configure network address translation settings. This enables LAN-side devices to communicate with the Internet. Parameter Meaning Address Translation Enable to use Network Address Translation. Log Output of Deleted Packets Enable to log deleted packets (such as errors) during address translation. WBMR-HP-G300H User Manual 38 Chapter 4 Configuration Route Configure the AirStations IP communication route. Parameter Meaning Destination Address Adds a destination IP address and subnet mask to a routing table. Gateway Metric Adds a gateway address to a routing table. The metric is the maximum number of router hops a packet may take on the way to its destination address. Values between 1 and 15 may be entered. The default value is 15. Routing Information Manual entries will appear here after being added. WBMR-HP-G300H User Manual 39 Chapter 4 Configuration Wireless Config WPS WPS Status and Settings. Parameter WPS External Registrar AirStation PIN Enrollee PIN WPS status Meaning Enable to use WPS automatic configuration. Enable to accept the external configure requests from other WPS devices. Note: External configure requests will not be accepted if AOSS is in use. Displays the PIN code of the AirStation. Clicking [Generate PIN]

will generate a new PIN code. This code can be entered into other wireless devices that support WPS. Enter the PIN code for the other wireless device and click [OK]. Displays [configured] if all available wireless bands are configured. Displays [unconfigured] if at least one wireless band is unconfigured. WBMR-HP-G300H User Manual 40 Chapter 4 Configuration AOSS AOSS Status and Settings. WBMR-HP-G300H User Manual 41 Chapter 4 Configuration Parameter Meaning Initiates AOSS automatic wireless configuration. Click this, then press or click the AOSS button on your AOSS-compatible wireless client. Repeat for additional AOSS clients. Click this button to disconnect AOSS connections. Note: If AOSS connections are disconnected, the SSID and encryption keys will be restored to their most recent settings before using AOSS. Encryption Type of Exclusive SSID for WEP You may allow a separate SSID specifically for WEP connections. If

[disabled] is selected, then clients will not be able to connect with WEP. Encryption level expansion function Expands security method from TKIP to WPA/WPA2-PSK-mixed mode. Dedicated WEP SSID isolation Set a separate SSID and network segment specifically for WEP connections. Devices connected with WEP will not be able to communicate with devices connected using AES/TKIP. All connected devices will be able to communicate with the internet. Allow WEP for Game Console Only When enabled, the AirStation allows wireless devices to connect with 64 or 128 bit WEP. AOSS Button on the AirStation Unit Uncheck to disable the physical AOSS button on the AirStation. Current Encryption Information

* AOSS Connection only Displays the encryption type, SSID, an encryption key configured by AOSS.

[Random]

[KEY base]

[Reset]

Click to enter random values for SSID, encryption key, and other settings. Click to return the SSID, encryption key, and other wirelesss settings to the values on the case sticker. Click to return the SSID, encryption key, and other wireless settings to their previous values. AOSS Client Information*

* AOSS Connection only Displays AOSS clients connected to the AirStation and information of the devices which are wirelessly communicated. WBMR-HP-G300H User Manual 42 Chapter 4 Configuration Basic The screen to configure a basic wireless settings. Parameter Wireless Radio Wireless Channel 300Mbps Mode Meaning Determines whether to allow wireless communication. If this is unchecked, then no wireless connections will be allowed. Sets a channel (a range of frequencies) used for wireless connections. With Auto Channel selected, the AirStation will automatically use the best available channel. 300 Mbps mode uses twice the normal frequency range, 40 MHz instead of 20 MHz. In uncongested areas this can increase performance. To use 300 Mbps mode, set the Bandwidth to 40 MHz and choose an Extension Channel. Note: If using Auto Channel for the wireless channel, then the Extension Channel is set automatically. WBMR-HP-G300H User Manual 43 Chapter 4 Configuration Parameter Broadcast SSID

[Allow multiple SSIDs]

[Use Single SSID]

SSID1 SSID2 SSID3 Separate feature Meaning If [Allow] is checked, then the AirStation will respond to SSID searches from wireless devices by broadcasting its SSID. If [Allow] is unchecked, then the AirStation ignores SSID searches from wireless devices. Clicking [Allow multiple SSIDs] will enable Multi Security, allowing the use of multiple SSIDs, each with different wireless security settings. Clicking [Use Single SSID] will disable the Multi Security function. The AirStation will then allow one SSID and one type of wireless security. Note: When using Multi Security, you need to enable at least one of the following: SSID1, SSID2, or SSID3. Multi Security SSID1 can use WPA-PSK-TKIP or WPA/WPA2-Mixed for wireless security. Multi Security SSID2 can use WPA-PSK-AES for wireless security. Multi Security SSID3 can use WEP for wireless security. When [Separate] is enabled, wireless devices connected to the AirStation can communicate only with the Internet side, not with each other. SSID Set SSID using 1-32 alphanumeric characters. Wireless authentication Specifies an authentication method used when connecting to a wireless device. WBMR-HP-G300H User Manual 44 Chapter 4 Configuration Parameter Meaning Wireless encryption You may use any of the following types of encryption:

No encryption Data is transmitted without encryption. Avoid this option since any communication may be intercepted.

[No encryption] can be selected only when [No authentication] is selected for Wireless authentication. WEP WEP is a common encryption method supported by most devices. Use an encryption key to communicate with a wireless device. WEP can only be selected when [No authentication] is selected for Wireless authentication. TKIP TKIP is an encryption method which is more secure than WEP, but slower. Use an pre-shared-key to communicate with a wireless device. TKIP can be selected only when WPA-PSK or WPA2-PSK is selected for Wireless authentication. AES AES is more secure than TKIP, and faster. Use a pre-shared-key to communicate with a wireless device. AES can be selected only when WPA-PSK or WPA2-PSK is selected for Wireless authentication. TKIP/AES mixed mode TKIP/AES mixed mode allows both TKIP and AES authentication and communication. TKIP/AES mixed mode can be selected only when WPA/WPA2 mixed mode - PSK is selected for Wireless authentication. A pre-shared key or passphrase is the [password] for your wireless connections. There are two different formats for a pre-shared key. Use 8 to 63 alphanumeric characters (case-sensitive) for a [character]

(ASCII) passphrase, or use 64 digits using 0 to 9 and a to f (not case-

sensitive) for a [hexadecimal] passphrase.. WPA-PSK (Pre-Shared Key) Rekey interval Set the update interval for the encryption key between 0 and 1440

(minutes). WBMR-HP-G300H User Manual 45 Chapter 4 Configuration Parameter Meaning Set up WEP encryption key A WEP encryption key (passphrase) may have any of four different formats. A [character] (ASCII) passphrase may use either 5 or 13 alphanumeric characters (case-sensitive). A [hexadecimal] passphrase may use either 10 or 26 digits using 0 to 9 and a to f (not case-sensitive). WBMR-HP-G300H User Manual 46 Chapter 4 Configuration Advanced Configure advanced wireless settings. Parameter Multicast Rate DTIM Period Privacy Separator Meaning Set the communication speed of multi-cast packets. Set the beacon responding interval (1 -255) for which the AirStation responds to a wireless device. This setting is effective only when power management is enabled for the wireless device. If enabled, the Privacy Separator blocks communication between wireless devices connected to the AirStation. Wireless devices will be able to connect to the Internet but not with each other. Devices that are connected to the AirStation with wired connections will still be able to connect to wireless devices normally. WBMR-HP-G300H User Manual 47 Chapter 4 Configuration WMM Set priorities for specific communications. WBMR-HP-G300H User Manual 48 Chapter 4 Configuration Parameter Meaning WMM-EDCA Parameters You don't usually need to change these settings. Using the default settings is recommended. Priority The following priorities may be applied to individual transmission packets: (Highest) 8, (High) 4, (Normal) 2, and

(Low) 1. From the queue, these packets are processed in order of priority. CWmin, CWmax The maximum and minimum value of the contention window. The contention window is used in the frame collision avoidance structure performed in IEEE802.11, and generally, the smaller the value in the window, the higher the probability that the queue obtains the right to send. AIFSN The interval to send frames. The unit of the AIFSN is a slot, just as the window defined by CWmin and CWmax is. The smaller the interval of sending frames, the faster the algorithm can restart. As a result, the priority of the queue is higher. TXOP Limit The period of time that the queue can use after obtaining the right to send. The unit is 32 ms. The longer this time, the more frames can be sent per right to send. However, the queue may interfere with other packet transmissions. If TXOP Limit is set to 0

(zero), only one frame can be sent per right to send. Admission Control Restricts new frames from interfering with a previous queue. New packets are prioritized lower until a queue of them is collected. As the new queue accumulates more packets, its priority increases. WBMR-HP-G300H User Manual 49 Chapter 4 Configuration MAC Filter Restrict access to specific wireless devices. Parameter Meaning Enforce MAC Filtering Registration List Enable to restrict wireless connections to devices with registered MAC addresses. Displays the MAC addresses of registered devices which are permitted to connect wirelessly.

[Edit Registration List]

Click to add a wireless device to the list of permitted devices. MAC Addresses to be Registered Enter a MAC address of a wireless device to permit to connect to the AirStation. Click [Register] to add that MAC address to the list. List of all clients that are associated with this AirStation Display the list of all MAC addresses of wireless devices connected to the AirStation. WBMR-HP-G300H User Manual 50 Chapter 4 Configuration Multicast Control Configure restrictions on unnecessary multicast packets sent to the wireless LAN port. Parameter Snooping Multicast Aging Time Meaning If enabled, snooping supervises multicast administrative packets such as IGMP and restricts unnecessary multicast transfers to wired or wireless ports. Set the time to hold the data from multicast snooping in the range of 1 to 3600 (seconds). Enter a value bigger than the IGMP/MLD query interval. WBMR-HP-G300H User Manual 51 Chapter 4 Configuration Security (Router Mode only) Firewall (Router Mode only) Configure the AirStations firewall. Parameter Log Output Basic Rules Meaning Enable to output a log of firewall activity. Enable to use any of the quick filters. Preconfigured quick filters include:

Prohibit NBT and Microsoft-DS Routing When this is enabled, you cannot use the Microsoft network feature from the Internet side to the LAN side and from the LAN side to the Internet. WBMR-HP-G300H User Manual 52 Chapter 4 Configuration Parameter Meaning Reject IDENT Requests Enabling this option will answer IDENT requests from the Internet side with corresponding rejection packets. Enable this option if you experienced slower transfer speed for network application such as sending mail, using ftp or displaying on browser. If you have configured transfer of IDENT requests to the LAN side computer in the address translation settings (DMZ or TCP port:113), then that setting has higher priority, and overrides this setting. Block Ping from Internet If this is enabled, the AirStation will not respond to pings from the Internet side. WBMR-HP-G300H User Manual 53 Chapter 4 Configuration IP Filter (Router Mode only) Edit IP filters. Parameter Log Output Operation Direction IP Address Protocol Meaning If enabled, IP filter activity is saved to a log. Specify how to process target packets. Specify the transmission direction of target packets. Specify the sender's IP address and receiver's IP address of the target packets. Select a protocol for target transmission packet. IP Filter Information Display the list of IP filters which have been registered. WBMR-HP-G300H User Manual 54 Chapter 4 Configuration VPN Pass Through (Router Mode only) Configure IPv6 pass through, PPPoE pass through, and PPTP pass through. Parameter Meaning IPv6 Pass Through Enable to use IPv6 Pass Through for address translation. PPPoE Pass Through Enable to use PPPoE bridge. Using PPPoE bridge lets you automatically obtain an IP address from your provider using the PPPoE protocol from your computer connected to the LAN side because all PPPoE packets can pass through between the Internet and LAN. PPTP Pass Through Enable to use the PPTP Pass Through for address translation. WBMR-HP-G300H User Manual 55 Chapter 4 Configuration LAN Config (QoS) Port Forwarding (Router Mode only) Configure port translation. Parameter Group Meaning Specify a group name for a new rule to belong to. Select [New Group] and enter the new group name in the Group Name field to create a new group. A group name can include up to 16 alphanumeric letters. Internet Side IP Address Enter the Internet side IP address (before translation) for the port translation table entry. WBMR-HP-G300H User Manual 56 Chapter 4 Configuration Parameter Protocol LAN Side IP Address LAN Side Port Meaning Select the Internet side protocol (before translation) for the port translation table entry. Enter the LAN side IP address (after translation) for the port translation table entry. Select the LAN side (after translation) port number (1 - 65535) for the port translation table entry. Port Forwarding Registration Information Shows current entries in the port translation table. WBMR-HP-G300H User Manual 57 Chapter 4 Configuration DMZ (Router Mode only) Configure a destination to transfer communication packets without a LAN side destination to. Parameter IP Address of DMZ Meaning Enter the IP address of the destination to which packets which are not routed by a port translation table are forwarded. Note: RIP protocol packets (UDP port number 520) will not be forwarded. WBMR-HP-G300H User Manual 58 Chapter 4 Configuration UPnP (Router Mode only) Configure UPnP (Universal Plug and Play). Parameter UPnP Meaning Enable or disable Universal Plug and Play (UPnP) functionality. WBMR-HP-G300H User Manual 59 Chapter 4 Configuration QoS (Router Mode only) Configure the priority of packets sent to the Internet. Parameter Meaning QoS for transmission to the Internet Determine whether or not to prioritize packets sent to the Internet. Check this box to enable QoS. Upload bandwidth Enable application name Specify the upstream bandwidth in kbps from the AirStation to the internet side. Set the actual value for the upstream bandwidth. Enable or disable this entry. Enter an application name. Names may use up to 32 alpha numerical characters, double or single tick marks ("'), quotation marks (), and semicolons (;). protocol Select either TCP or UDP. WBMR-HP-G300H User Manual 60 Chapter 4 Configuration Parameter destination Port priority Meaning Specify a destination port with the value of 1 - 65535. If this field is empty, a random port is selected. Select high, medium or low. If packets do not qualify for classification as a type on the list, then their priority is treated as a level between medium and low. WBMR-HP-G300H User Manual 61 Chapter 4 Configuration Movie Engine Configure Movie Engine options. WBMR-HP-G300H User Manual 62 Chapter 4 Configuration Parameter Meaning Movie Engine switch status Display the status of the Movie Engine switch. IPv6 Pass Through Multicast Rate Multicast Control TCP Rwin Size Limit Set to enable the IPv6 Pass Through. Select the rate of the Multicast Control. Set the Multicast Control setting to on. Configure TCP packets Rwin size limitation to pass AirStations wireless LAN. Wireless Priority Control Rules Display the list of rules controls the priority pass through of packets in the AirStation wireless LAN. Transmission Rate Limit Select the transmission limit to prevent transmission rate fall down. Number of Retries Select limit number of retries. WBMR-HP-G300H User Manual 63 Chapter 4 Configuration NAS Disk management View the status of and configure attached USB hard disks. Parameter Device Disk Assignment Partition Information Meaning Displays information for attached USB disks. Disks are removed when [Remove] in the Device column is clicked. A disk number will be automatically assigned to the disk or you can choose a number. Select a disk number, or select [Do not assign], and then click [Apply] to assign a disk number. Displays the partition information for the selected USB disk. Click

[Format] to format the disk. Note: formatting a disk will erase all information from it. WBMR-HP-G300H User Manual 64 Chapter 4 Configuration Parameter Meaning Re-recognize USB devices Click this to re-scan for connected USB disks. Automatic USB Disk Assignment Check [Use] to automatically select an attached USB hard disk. The entire drive will be used as the shared folder. To configure your disk and share manually, uncheck [Use].

[Use] is selected by default. FAT format file name character code Select the file name character code used for FAT formatting. HDD power-saving function Set the HDD power saving function. HDD stop time Select a time duration after which to stop the HDD. WBMR-HP-G300H User Manual 65 Chapter 4 Configuration Shared Folder Configure a USB hard disk for use with shared folders. WBMR-HP-G300H User Manual 66 Chapter 4 Configuration Parameter Meaning Shared Folder Name*

Enter a name for the shared folder. Up to 18 alphanumeric characters, space, hyphens (-), and underscores (_) may be used. Shared Folder Description*

Disk Partition Area*

Disclosed to*

Access Limits Web Access Enter a description of the shared folder (optional). Up to 75 alphanumeric characters, space, hyphens (-), and underscores (_) may be used. Displays the partition area, format type, and the capacity of the USB disk. Check the functionality that you want to support. Win/Mac OS

(Samba NAS), Web Access, Media Server, and/or BitTorrent may be checked. Only one folder may be chosen for either Media Server or BitTorrent functionality. If access limits are enabled, use the arrows to move highlighted users between the columns for [Read/Write], [Read-only] or [No access] privileges. You may also select to enforce access limits on users accessing through Web Access by checking the Access Limits checkbox. Users will have the same access levels as assigned above. If Access Limits is not checked, then all users accessing the shared folder via Web Access will have [Read only] access.. Shared Folder Registration Information*

Displays information about the shared folder.

* These parameters are displayed when [Automatic USB Disk Assignment] (page 65) is not set to [Use]:

The following settings are used for [Shared Folder] when [Disk Management] is activated. All folders: [Access Limits] settings in effect. Shared Folder/ Web Access: All folders are shared. Media Server/BitTorrent: The first folder is shared. WBMR-HP-G300H User Manual 67 Chapter 4 Configuration User Management This screen lets you add users to the access list with the ability to access shared folders. Parameter User Name Password User Description Current Users Meaning Enter the name of a user to be given access to the shared folder. Up to 20 alphanumeric characters, space, hyphens (-), and underscores (_) may be used for each user. Up to 16 users may be entered. Enter the users password. Use of the same password that they use to log into their computer is recommended. Up to 20 alphanumeric characters, space, hyphens (-), and underscores

(_) may be used. For Windows 98SE/98/95 users, up to 14 alphanumeric characters may be used. Mac OS users may use up to 8 alphanumeric characters. If you enter a longer password than your users can use, then they will not be able to access the share. Describe the user (optional). Up to 75 alphanumeric characters, space, hyphens (-), and underscores (_) may be used. Lists current users, including [guest]. [guest] is a built-in account that cannot be changed or deleted. WBMR-HP-G300H User Manual 68 Chapter 4 Configuration Shared Service Assign AirStation and workgroup names to access shared folders. Parameter Shared Folder AirStation name AirStation Description Workgroup name Meaning Enable to make a USB disk available on your local network. Rename your AirStation if desired. Up to 15 alphanumeric characters, space, and hyphens (-), may be used. The AirStation name is also used as the host name that will be used with the shared service. The shared service may not be available you use over 15 alphanumeric characters in your AirStations name. Describe the AirStation (optional). Up to 48 alphanumeric characters, space, hyphens (-), and underscores (_) may be used. Enter your workgroup name. Up to 15 alphanumeric characters, space, hyphens (-), underscores (_) and period (.) may be used. Windows Client Language Select the language to be used by the Windows client. Shared Service Displays the status of the USB disk that is to be used with the shared service. WBMR-HP-G300H User Manual 69 Chapter 4 Configuration Web Access The screen to set to use the Web Access function. Parameter Web Access Meaning Check [Enable] to use Web Access. Web Access Display Language Set the language to be used with Web Access. HTTPS/SSL Encryption Check [Enable] to use SSL encryption for protected data transfer. Web Access External Port Automatically sets the external port used for Web access. To select the port manually, select [Manual]. WBMR-HP-G300H User Manual 70 Chapter 4 Configuration Parameter Meaning DNS Service Host Name Sets the DNS Service Host Name when the Web access function is activated. Select [Use BuffaloNAS.com registration function]

to use the Web access function easily. Youll have to configure a [BuffaloNAS.com name] and [BuffaloNAS.com key] to use BuffaloNAS.com. Up to 3-20 alphanumeric characters, space, hyphens (-), underscores (_) and period (.), may be used in the BuffaloNAS.com name. Up to 3-20 alphanumeric characters, space, hyphens (-), underscores (_) and period (.), may be used in the BuffaloNAS.com key. Note:

disconnected from power, even for a moment. The registered name is deleted from the server if the AirStation is Web Access Displays the status of web access. External Port Status Display the status of the external port. BuffaloNAS.com Display the status of BuffaloNAS.com. WBMR-HP-G300H User Manual 71 Chapter 4 Configuration Media Server Media Server settings. Parameter Media Server Status Meaning Enable to use the media server. Displays the status of the media server. WBMR-HP-G300H User Manual 72 Chapter 4 Configuration BitTorrent Configure the BitTorrent client. Parameter BitTorrent Function Meaning Enable to use the BitTorrent client. If the BitTorrent client is enabled, overall communication performance may decrease and the reactions to setting screens slow down. If that happens, reformat the USB disk with XFS. This may reverse the performance slowdown. External Port Number Select the external port number. WBMR-HP-G300H User Manual 73 Chapter 4 Configuration Parameter Meaning Bandwidth Restriction Set a bandwidth limit for BitTorrent.

[Download Manager]

Displays the BitTorrent download manager screen. Add a torrent and then click [Add] to download the file(s).

[Delete BitTorrent information]

Deletes all files, including the torrent files and files which are currently downloading. The downloaded file is not deleted. BitTorrent Status Display the status of the BitTorrent client. BitTorrent External Port Status Display the external port status of the BitTorrent client. Access here to download the latest BitTorrent client for PC. http://www.bittorrent.com/

WBMR-HP-G300H User Manual 74 Chapter 4 Configuration Admin Config Name Configure basic AirStations settings. Parameter AirStation Name List Network Services Meaning Enter a name for the AirStation. Names may include up to 64 alphanumeric characters and hyphens (-). Enable or disable this item to display the computers and devices on your network with their supported services. WBMR-HP-G300H User Manual 75 Chapter 4 Configuration Password Configure the password to log in to the AirStations configuration screen. Parameter Administrator Name Meaning The Administrator name is used to log in to the AirStations configuration utility. This name is fixed as [root]. Administrator Password The password is required to log in. It may contain up to 8 alphanumeric characters and underscores (_). WBMR-HP-G300H User Manual 76 Chapter 4 Configuration Time/Date Configure the AirStations internal clock. Parameter Local Date Local Time Time Zone Meaning You may manually set the date of the AirStations internal clock. You may manually set the time of the AirStations internal clock. Specify the time zone (offset of Greenwich Mean Time) of the AirStations internal clock. WBMR-HP-G300H User Manual 77 Chapter 4 Configuration NTP Configure an NTP server to automatically synchronise the AirStations internal clock. Parameter Meaning NTP Functionality Enable to use an NTP server. The default is Enabled. NTP Server Enter the name of the NTP server as a host name, host name with domain name, or IP address. Up to 255 alphanumeric characters, hyphens (-), and underscores (_) may be used. The default is [time. nist.gov]. Update Interval How often will the AirStation check the NTP server for the correct time? Intervals of 1 - 24 hours may be set. The default is 24 hours. WBMR-HP-G300H User Manual 78 Chapter 4 Configuration ECO Configure Eco mode from this screen. WBMR-HP-G300H User Manual 79 Chapter 4 Configuration Parameter Schedule feature Weekly schedule Register schedule User Define Mode Meaning Enable to schedule Eco mode. Note: If Schedule is enabled, AOSS will only function while the AirStation is in Normal Operating Mode. Graphically displays the configured schedule. Configure operational mode for time periods in the weekly schedule. If User Defined mode is chosen, configure it below. Individual power saving elements may be configured individually for User Defined mode. WBMR-HP-G300H User Manual 80 Chapter 4 Configuration Network-USB Configure Network-USB from this screen. Parameter Network-USB Use multifunction Printer Meaning This is a function for sharing USB devices connected to the AirStation from multiple computers on a wired or wireless LAN. Set this to Disable to reduce the impact on the NAS and other functions, reduce the effect on performance, or if you do not want to share for security reasons. This function uses a multifunction printer supporting mass storage classes as a printer. If you want to use as a NAS function instead of a printer, set this to Disable. WBMR-HP-G300H User Manual 81 Chapter 4 Configuration Access Restrict access to the AirStations settings screens. Parameter Log Output Meaning Enabling outputs a log of changes to access settings. Prohibit configuration from wireless LAN If enabled, prevents access to settings screens from wirelessly connected devices (only wired devices may configure). Prohibit configuration from wired LAN If enabled, prevents access to settings screens from wired devices

(only wirelessly connected devices may configure). Permit configuration from wired Internet If enabled, allows access to settings screens from network devices on the WAN (Internet) side. Permitted IP address Permitted Port Displayed only if Internet side configuration is enabled. Enter the IP address of a device that is permitted to configure the AirStation remotely from the WAN (Internet) side. Displayed only if Internet side configuration is enabled. Set a port number (1 - 65535) to configure the AirStation from the WAN

(Internet) side. WBMR-HP-G300H User Manual 82 Chapter 4 Configuration Log Transfer the AirStations logs to a syslog server. Parameter Log Transfer Syslog Server Meaning Enable to send logs to a syslog server. Identify the syslog server by host name, host name with domain name, or IP address. You may enter up to 255 alphanumeric characters, hyphens (-), and underscores (_). Transfer Logs Choose which logs will be transferred to the syslog server. WBMR-HP-G300H User Manual 83 Chapter 4 Configuration Save/Restore Save AirStation settings as a file, and restore from them later. Parameter Save current settings Restore Configuration from Backup File Meaning Clicking [Save] will save the current configuration of the AirStation to a file. If the [Encrypt the configuration file with a password]

option is checked, then the configuration file will be password protected with the current Administrator Password. Restore the configuration of the AirStation from a saved configuration file by clicking the [Browse...] button, navigating to the configuration file, and then clicking Restore. If the configuration file was password protected, then put a check next to [To restore from the file you need the password], enter the password, and click

[Open]. WBMR-HP-G300H User Manual 84 Chapter 4 Configuration Initialize/Restart Initialize or restart the AirStation. Parameter Restart Initialize Meaning Click [Restart Now] to restart the AirStation. Click [Initialize Now] to initialize and restart the AirStation. WBMR-HP-G300H User Manual 85 Chapter 4 Configuration Update Update the AirStations firmware. Parameter Firmware Version Update method Firmware File Name Meaning Displays the current firmware version of the AirStation. Specify Local File Updates the firmware stored on your computer. Auto Update Online Automatically updates the latest firmware that is available online. Click [Browse...] to specify a firmware file and click [Update Firmware.] You dont need to specify the firmare lodcation if selecting [Auto Update Online]. WBMR-HP-G300H User Manual 86 Chapter 4 Configuration Diagnostic System Info View system information for the AirStation. WBMR-HP-G300H User Manual 87 Chapter 4 Configuration Parameter Model AirStation Name Operational Mode Meaning Displays the product name of the AirStation and the firmware version. Displays the AirStation Name. Displays the current operational mode of the AirStation. Movie Engine Status Displays the current Movie Engine Status. Internet LAN Wireless NAS ECO Mode Displays the information about the Internet port. Displays the information about the LAN port. Displays the wireless status. Displays the information about USB disk. Display current ECO Mode status. WBMR-HP-G300H User Manual 88 Chapter 4 Configuration Logs The AirStations logs are recorded here. Parameter Display log info Logs Meaning Choose the types of logs to display. Displays the log information recorded in the AirStation. WBMR-HP-G300H User Manual 89 Chapter 4 Configuration Packet Info View packet transfer information. Parameter Sent Received Meaning Displays the number of packets sent to the Internet side of Ethernet, the LAN side of the Ethernet, and the LAN side of the wireless connection. Displays the number of packets received from the Internet side of Ethernet, the LAN side of the Ethernet, and the LAN side of the wireless connection. WBMR-HP-G300H User Manual 90 Chapter 4 Configuration Client Monitor This screen shows devices that are connected to the AirStation. Parameter Client Monitor Meaning Displays information ( MAC address, lease IP address, host name, communication method, wireless authentication and 802.11n) for devices that are connected to the AirStation. WBMR-HP-G300H User Manual 91 Chapter 4 Configuration Ping A Ping test checks whether the AirStation can communicate with a specific network device. Parameter Destination Address Meaning Enter an IP address or a host name of the device for which you try to verify the connection, and click [Execute]. The result will be displayed in the [Result] field. WBMR-HP-G300H User Manual 92 Chapter 4 Configuration DSL Connection (Router Mode only) View DSL Connection for the AirStation. Parameter DSL Status PCV Connection Meaning If a DSL link has been established, technical information about it is shown here. This section reflects settings in the Internet Connection Type and VC settings sections of the Internet/LAN setup panel. See that panels Help page for detailed descriptions. WBMR-HP-G300H User Manual 93 Chapter 5 - Connect to a Wireless Network Automatic Secure Setup (AOSS/WPS) AOSS and WPS are systems which enable you to automatically configure wireless LAN settings. Just pressing the buttons will connect wireless devices and complete security settings. Easily connect to any wireless devices, computers, or game machines which support AOSS or WPS. AOSS (AirStation One-Touch Secure System) was developed by Buffalo Technology. WPS was created by the Wi-Fi Alliance. Internet PUSH PUSH AirStation PC or Game console

(AOSS Devices) Before using AOSS or WPS to connect to a Buffalo wireless client, install Client Manager software from the included AirNavigator CD. Consult your wireless clients documentation for more information. Buffalos Client Manager software can be used with the wireless LAN devices built into your computer. However, it is not guaranteed to work with all wireless LAN devices available. Some wireless clients may require manual setup. WBMR-HP-G300H User Manual 94 Chapter 5 Connect to a Wireless Network Windows 7/Vista (Client Manager V) If you are using Windows 7/Vista, use the included Client Manager V software to connect wirelessly with AOSS/WPS. 1 2 3 4 Click the icon in the system tray. When the screen at left is displayed, click [Create Profi le]. If the User Account Control screen opens, click [Yes] or [Continue]. Click the [WPS AOSS] button. Follow any instructions displayed on the screen. When the Security LED on the front of the AirStation stops fl ashing and is lit steadily, the connection is complete. WBMR-HP-G300H User Manual 95 Chapter 5 Connect to a Wireless Network Windows XP (Client Manager 3) If you are using Windows XP, use Client Manager 3 to connect wirelessly with AOSS/WPS. Right click on the icon in the system tray, and select [Profi le]. 1 2 Click the [WPS AOSS] button. Follow any instructions displayed on the screen. When the Security LED on the front of the AirStation stops fl ashing and is lit steadily, the connection is complete. Other Devices (e.g. Game Console) If you are using a game machine which supports AOSS or WPS, refer to that devices manual to initiate AOSS/WPS. When instructed, hold down the AOSS button on the AirStation for 1 second. When the Security LED stops blinking and is lit steadily, the connection is complete. WBMR-HP-G300H User Manual 96 Chapter 5 Connect to a Wireless Network Manual Setup You can also connect to the AirStation without installing Client Manager V or Client Manager 3 by using the utility built-in to Windows. The procedure varies depending on which version of Windows you are using. Note:

If the AirNavigator CD is used to perform setup when making the initial settings of AirStation, the wireless connection settings for the AirStation are completed during the Setup process. As a result, you do not need to make the settings below. After setup is complete, once the LAN cable is removed, you can connect from your wireless client to the AirStation. Before performing setup, make the settings to enable the wireless client of the computer. Windows 7 (WLAN AutoConfig) With Windows 7, use WLAN AutoConfig to connect to the AirStation. 1 2 Click on the network icon in the system tray. Select the target AirStations name and click

[Connect]. If you will be connecting to this device in the future, checking [Connect automatically] is recommended. WBMR-HP-G300H User Manual 97 Chapter 5 Connect to a Wireless Network 3 Enter the encryption key and click [OK]. Windows Vista (WLAN AutoConfig) With Vista, use WLAN AutoConfig to connect to the AirStation. 1 2 3 Right click on the wireless network icon in the system tray. Click [Connect to a network]. When the screen at left is displayed, select the network to connect to and click [Connect]. WBMR-HP-G300H User Manual 98 Chapter 5 Connect to a Wireless Network If the screen below is displayed, click [I want to enter the network key or passphrase instead]. Otherwise, go to step 4. WBMR-HP-G300H User Manual 99 Chapter 5 Connect to a Wireless Network 4 Enter the encryption key and click [Connect]. Step through the wizard to finish configuration. If the Set Network Location screen is displayed, select [Home], [Work], or [Public location] depending where youre using the AirStation. WBMR-HP-G300H User Manual 100 Chapter 5 Connect to a Wireless Network Windows XP (Wireless Zero Configuration) Windows XP includes a built-in utility to connect to your AirStation. Note:

If Client Manager 3 is installed on your computer, Wireless Zero Configuration is disabled. Uninstall Client Manager 3 to use Wireless Zero Configuration, or just use Client Manager 3 to connect to the AirStation. 1 2 3 4 Right click on the wireless network icon displayed in the system tray. Click [View Available Wireless Networks]. Select the network to connect to and click

[Connect]. Enter the encryption key (twice) and click

[Connect]. Follow the instructions displayed on the screen to finish configuration. WBMR-HP-G300H User Manual 101 Chapter 5 Connect to a Wireless Network Mac OS X (AirPort) Use AirPort in the Mac OS X to connect to the AirStation. 1 2 3 4 Refer to the label on the side of the AirStation, and make a note of the SSID and KEY printed on the label. icon in the top Click the section of the screen, and select

[Turn Airport On]. Click the value that matches the SSID that was noted in step 1. Enter the value for the KEY that was noted in step 1 into the Password entry box, insert a check mark into

[Remember this network], and click

[OK]. Follow the instructions displayed on the screen to finish configuration. WBMR-HP-G300H User Manual 102 Chapter 6 - Trouble Shooting Cannot connect to the Internet over wired connection. Make sure that your AirStation is plugged in!

Check that the status LEDs of your AirStation are lit as below:

Power DSL Internet Green light is ON or flashing Green light is ON Green light is ON or OFF (depending on your environment) Make sure that your computer is set to [Obtain an IP address automatically]. (see appendix D) Refer to the documentation provided by your provider, and make the correct ADSL settings. Restart your AirStation. Cannot access the web-based configuration utility. See chapter 4 for instructions to open the AirStations configuration utility. Enter the correct user name and password to login to the configuration screen. The factory defaults are [root] (in lower case) for the user name and a blank password (enter nothing). If you changed the password, enter the new password that you set. Verify that your web browser is not set to use proxies. Make sure that your computer is configured to [Obtain an IP Address Automatically]. (see appendix D) Restart your AirStation. WBMR-HP-G300H User Manual 103 Chapter 6 Trouble Shooting Cannot connect to the network wirelessly. Configure your wireless client with the same SSID, encryption type, and encryption key as set on the AirStation. The factory defaults are:

SSID -

Encryption Type -

Encryption Key -

Note:

BUFFALO-XXXXXX (the last 6 digits of the AirStations MAC address) WPA/WPA2 mixed mode - PSK (Connect with either WPA-PSK TKIP or WPA2-PSK AES). Printed on the label of the AirStation. Encryption is disabled by default in Asia Pacific. Place your AirStation and wireless devices 2 - 10 feet apart. Restart your AirStation. You forgot AirStations SSID, Encryption Key, or Password. Hold down the Reset button on the base of your AirStation for 3 seconds to initialize its settings. All settings, including your password, SSID, and encryption key will be initialized to their defaults. The factory defaults are:

SSID -

Encryption Type -

Encryption Key -

BUFFALO-XXXXXX (the last 6 digits of the AirStations MAC address) WPA/WPA2 mixed mode - PSK (Connect with either WPA-PSK TKIP or WPA2-PSK AES). Printed on the label of the AirStation.

(Encryption is disabled by default for Asia Pacific AirStations.) The link speed is slower than 300 Mbps (Maximum link speed is only 144 Mbps). By default, the AirStations 300 Mbps mode is not enabled. You may enable it with the following procedure:

1. Open the configuration utility (chapter 4). 2. Click [Wireless SSID & Channel (11n 300 Mbps Mode)] in Easy Setup. 3. Change the value in [300Mbps Mode] - [Band Width] to 40 MHz and click [Apply]. If you still cannot connect at 300 Mbps, check the settings of your wireless client device. WBMR-HP-G300H User Manual 104 Chapter 6 Trouble Shooting Other Tips Issue:

I reset my wireless router to factory settings and forgot how to log in to the configuration utility. Answer:

Open your browser and enter 192.168.11.1 as the browser address and hit Enter. You will be prompted to log in. Enter the user name as root and the password box is left empty (no password). Click [OK] to complete the login and the option to reset your password will be available on the first page. Issue:

How do I forward ports on my wireless router for my gaming console?

Answer:

Log in to the router's configuration utility. From the home page, go to the Internet Game/ Port Mapping section. Enter the port that needs to be forwarded, and the IP address of the gaming console. Issue:

How do I enable or modify security encryption settings on the wireless router?

Answer:

Log in to the configuration utility with your browser. Go to the Wireless Config tab and then select the Security tab. Buffalo recommends WPA for wireless encryption. The passphrase/key should be at least 8 characters in length. Issue:

How do I change my wireless router's broadcasted network name (SSID)?

Answer:

Log in to the configuration utility. Go to the Wireless Config tab and then select the Basic tab if necessary. Find the settings area for SSID. Select the [Use] radio button and enter the name you WBMR-HP-G300H User Manual 105 Chapter 6 Trouble Shooting wish to use for your network in the text field provided. Click [Apply] to save the settings. Once the wireless router has rebooted, you will need to manually select the new network name for all wireless devices and enter your encryption key if necessary. Issue:

What can I do if my wireless connection drops randomly or seems slow?

Answer:

There are many environmental factors that may cause this. First, ensure the issue is not range related by moving the wireless router and the client device closer together. If the connection drops continue, then range is probably not the issue. Other 2.4 GHz devices such as microwaves, other wireless networks, and 2.4 GHz wireless phones may impact performance. Try a different wireless channel for your wireless router. Log in to the wireless router with your browser. Click on the Wireless Config tab and then the Basic tab. Wireless channels from 1 - 11 may be selected. Try the Auto-Channel option if available. Otherwise, manually select an alternate channel and click [Apply]. Issue:

Where can I download the latest drivers, firmware and instructions for my Buffalo wireless products?

Answer:

The latest drivers and firmware are available online at www.buffalotech.com WBMR-HP-G300H User Manual 106 Appendix A - Specifications Wireless LAN Interface Standard Compliance Transmission Method Frequency Range Transmission Rate Access Mode Security Wired LAN Interface Standard Compliance Transmission Rate Transmission Encoding Access Method Speed and Flow Control Number of LAN Ports LAN Port Connector DSL Interface Standard Compliance Number of DSL Ports DSL Port Connector 54, 48, 36, 24, 18, 12, 9, 6, 11, 5.5, 2, 1 Mbps IEEE802.11b / IEEE802.11g / IEEE802.11n Direct Sequence Spread Spectrum (DSSS), OFDM, MIMO 2,412 - 2,462 MHz (Channels 1 - 11) 802.11b/g:

802.11n Infrastructure Mode AOSS, WPA2-PSK (TKIP/AES), WPA/WPA2 mixed PSK, WPA-PSK (TKIP/AES), 128/64bit WEP, Mac Address Filter

(LongGI) 130, 117, 104, 78, 52, 39, 26, 13Mbps (2 stream) 65, 58.5, 52, 39, 26, 19.5, 13, 6.5Mbps (1 stream)

(ShortGI) 130, 115.5, 86.6, 57.7, 43.3, 28.8, 14.4Mbps (2 stream)

(LongGI) 270, 243, 216, 162, 108, 81, 54, 27Mbps (2 stream)

(ShortGI) 300, 270, 240, 180, 120, 90, 60, 30Mbps (2 stream) 20 MHz BW 40 MHz BW 65, 72.2, 57.8, 43.3, 28.9, 21.7, 14.4, 6.5Mbps (1 stream) 135, 121.5, 108, 61, 54, 40.5, 27, 13.5Mbps (1 stream) 150, 135, 120, 90, 60, 45, 30, 15Mbps (1 stream) IEEE802.3u (100BASE-TX), IEEE802.3 (10BASE-T) 10 / 100 / 1000 Mbps 1000BASE-T 4DPAM5, 100BASE-TX 4B5B/MLT-3, 10BASE-T Manchester Cording CSMA/CD 10/100/1000 Mbps, Auto Sensing, Auto MDIX 4 RJ-45 ADSL2+

1 RJ-11 WBMR-HP-G300H User Manual 107 Appendix A Specifications USB Interface Interface Connector Type Compliance Other Power Supply Power Consumption Dimensions Weight Operating Environment USB 2.0 Type A (plug) 5.0 V 500 mA (MAX 1000 mA) External AC 100-240 V Universal, 50/60 Hz About 12.0 W (Max) 165 mm x 158 mm x 35 mm (6.5 x 6.2 x 1.3 in.) (not including the stand) 330g (11.6 oz.) (not including the stand) 0-40 C (32-104 F) , 10-85 % (non-condensing) WBMR-HP-G300H User Manual 108 Appendix B - Default Configuration Settings Feature ADSL DDNS

(Router Mode only) VPN Server

(Router Mode only) Parameter Encapsulation IP Settings Host Name Domain Name MTU Modulation Multiplexing QoS Type PCR Rate SCR Rate Auto Detect Virtual Circuit Dynamic DNS Service Current Dynamic DNS Information LAN Side IP Address DHCP Server Function DHCP IP Address Pool PPTP Server Function Authorization Type Server IP Address Client IP Address DNS Server IP Address WINS Server IP Address MTU/MRU value PPTP User List Default Setting RFC1483 Bridged Obtain an IP Address Automatically (DHCP) none none Auto Multimode LLC UBR 0 cps 0 cps Disabled 0 VPI 35 VCI Disabled none 192.168.11.1(255.255.255.0) Enabled 192.168.11.2 for up to 64 Address(es) Disabled MS-CHAPv2 (40/128-bit Encryption) Auto Auto LAN IP address of the AirStation none none none WBMR-HP-G300H User Manual 109 Appendix B Default Configuration Settings Feature LAN DHCP Lease

(Router Mode only) NAT

(Router Mode only) Route WPS Parameter LAN Side IP Address DHCP Server Function

(Router Mode only) DHCP IP Address Pool

(Router Mode only) LAN Side IP Address

(IP Unnumbered)

(Router Mode only) Lease Period

(Router Mode only) Default Gateway

(Router Mode only) DNS Servers

(Router Mode only) WINZ Server

(Router Mode only) Domain Name

(Router Mode only) Default Gateway

(Bridge Mode only) DNS Server Address

(Bridge Mode only) Current DHCP Client Information Address Translation Log Output of Deleted Packets Routing Information WPS External Registrar AirStation PIN WPS Security Information Default Setting 192.168.11.1 Enabled 192.168.11.2 for up to 64 Addresses none 48Hours AirStation's IP Address AirStation's IP Address Do Not Specify Assigned Domain Name none none none Enabled Disabled none Enabled Enabled An 8-digit random value

(Printed on the label of the AirStation) WPS status:

SSID:

Security:

configured or unconfigured BUFFALO-XXXXXX (the last 6 digits of the AirStations MAC address) WPA/WPA2 mixedmode - PSK TKIP/AES mixedmode or none Encryption key: A 13-digit random value or disabled. (Printed on the label of the AirStation. Encryption is disabled by default settings on AirStation for Asia Pacific.) WBMR-HP-G300H User Manual 110 Appendix B Default Configuration Settings Feature AOSS Basic Default Setting none Enabled Parameter Encryption Type of Exclusive SSID for WEP Encryption level expansion function Disabled Dedicated WEP SSID isolation Allow WEP for Game Console Only Disabled AOSS Button on the AirStation Enabled Unit Wireless Radio Wireless Channel 300Mbps Mode Broadcast SSID Separate feature SSID Wireless authentication Wireless encryption WPA-PSK (Pre-Shared Key) Advanced Rekey interval Multicast Rate DTIM Period Privacy Separator 20MHz Enabled Auto Channel Band Width:

Extension Channel: -

Allow not used Use AirStation's MAC address WPA/WPA2 mixedmode - PSK, or no authentication TKIP/AES mixedmode, or no encryption A 13-digit random value or disabled

(Printed on the label of the AirStation. Encryption is disabled in default settings on AirStation for Asia Pacific.) 60 minutes Auto 1 Disabled WBMR-HP-G300H User Manual 111 Appendix B Default Configuration Settings Feature WMM Parameter WMM-EDCA Parameters

(Priority AC_BK (Low) ) WMM-EDCA Parameters

(Priority AC_BE (Normal) ) WMM-EDCA Parameters

(Priority AC_VI (High) ) WMM-EDCA Parameters

(Priority AC_VO (Highest) ) MAC Filter Multicast Control Firewall

(Router Mode only) Enforce MAC Filter Registration List Snooping Multicast Aging Time Log Output Basic Rules IP Filter

(Router Mode only) Log Output IP Filter Information Default Setting CWmin CWmax AIFSN TXOP Limit Admission Control CWmin CWmax AIFSN TXOP Limit Admission Control CWmin CWmax AIFSN TXOP Limit Admission Control For AP 15 1023 7 0

-----

For AP 15 63 3 0

-----

For AP 7 15 1 94

-----

For AP 3 7 1 47

-----

For STA 15 1023 7 0 Disabled For STA 15 1023 3 0 Disabled For STA 7 15 2 94 Disabled For STA 3 7 2 47 Disabled CWmin CWmax AIFSN TXOP Limit Admission Control Disabled none Enabled 300 Sec. Disabled Prohibit NBT and Microsoft-DS Routing Disabled Enabled Reject IDENT Requests Block Ping from Internet Enabled Disabled none WBMR-HP-G300H User Manual 112 Appendix B Default Configuration Settings Feature VPN Pass Through

(Router Mode only) Port Forwarding

(Router Mode only) DMZ

(Router Mode only) UPnP

(Router Mode only) QoS

(Router Mode only) Movie Engine Parameter IPv6 Pass Through PPPoE Pass Through PPTP Pass Through Port Forwarding Registration Information IP Address of DMZ UPnP QoS for transmission to the Internet Movie Engine switch status IPv6 Pass Through Multicast Rate Multicast Control Disk Management Shared Folder User Management Shared Service TCP Rwin Size Limit Wireless Priority Control Rules Transmission Rate Limit Automatic USB Disk Assignment FAT format file name character code HDD power-saving function Access Limits Web Access Current Users Shared Folder AirStation Name AirStation Description Workgroup Name Windows Client Language Shared Service Default Setting Disabled Disabled Enabled none none Enabled Disabled OFF Use 11 Mbps Use Snooping Function 300 Seconds Aging Time Seconds VI (priority) Change Priority Size Limit No limit Maximum Rwin Size 65536 bytes none No Limits Use North America (CP437) Not used HDD stop time 10 Minutes No Limits (Read/Write) Use Access Limits guest Enabled AP + AirStations MAC Address none WORKGROUP North America (CP437) none WBMR-HP-G300H User Manual 113 Appendix B Default Configuration Settings Feature Web Access Media Server BitTorrent Name Password Time/Date NTP ECO Parameter Web Access Web Access Display Language HTTPS/SSL Encryption Web Access External Port DNS Service Host Name Web Access status Media Server Status BitTorrent Function External Port Number Bandwidth Restriction BitTorrent Status AirStation Name List Network Services Administrator Name Administrator Password Local Date Local Time Time Zone NTP Functionality NTP Server Update Interval schedule Feature Register schedule User Define Mode Default Setting Disabled English Disabled Auto (Port Number:9000) Use BuffaloNAS.com registration function none Disabled none Disabled Auto (Port Number: 9002) Enabled Maximum Download Speed 1000 kB/s Maximum Upload Speed 200 kB/s none AP + AirStation's MAC Address Enabled root (fixed) none 2010 Year 1 Month 1 Day 0 Hour 0 Minute 0 Seconds

(GMT+00:00) Greenwich Mean Time, London Enabled time.nist.gov 24 hours Disabled Operational Mode: Normal Start time: 0:00 End time: 0:30 The day of week: none LED: Off Wired LAN: ECO (Slow operation) Wireless LAN: Off WBMR-HP-G300H User Manual 114 Appendix B Default Configuration Settings Feature Network-USB Access Log Parameter Network-USB Use multifunction Printer Log Output Limitation Item Log Transfer Syslog Server Transfer Logs Default Setting Enabled Enabled Disable Prohibit configuration from wireless LAN Disabled Prohibit configuration from wired LAN Disabled Permit configuration from wired Internet Disabled Disabled none Router Mode:

Address Translation, IP Filter, Firewall, PPPoE Client, Dynamic DNS, DHCP Client, DHCP Server, AOSS, Wireless Client, Authentication, Setting Changes, System Boot, NTP Client, and Wired Link Bridge Mode:

IP Filter, DHCP Client, AOSS, Wireless Client, Authentication, Setting Changes, System Boot, NTP Client, and Wired Link WBMR-HP-G300H User Manual 115 Appendix C - Network-USB Navigator Network-USB Navigator is compatible only with printers and multifunction printers (all-in-one devices with a printer, scanner, and memory card reader). It cannot be used with any other type of USB devices. Initial Setup for Windows Users Insert the AirNavigator CD into your computer. The setup wizard will launch automatically. If not, open the CD and click on the [ASSetWiz. exe] in the win folder. 1 2 Click [Install Network-USB Navigator]. WBMR-HP-G300H User Manual 116 Appendix C Network-USB Navigator 3 4 5 Click [Next]. Click [Next]. Click [Yes]. WBMR-HP-G300H User Manual 117 Appendix C Network-USB Navigator 6 7 8 Click [Next]. Click [Next]. Click [Start]. WBMR-HP-G300H User Manual 118 Appendix C Network-USB Navigator Installation on Windows XP (SP2 or later) Installation on Windows 7/Vista Click [Yes] when this screen is shown. Click [Install] when this screen is shown. Click [Yes] when this screen is shown. WBMR-HP-G300H User Manual 119 Appendix C Network-USB Navigator 9 1 You can select the behavior of this product when a USB device is detected. Select the connection behavior suited to your usage environment. 2 Click [Next]. 10 Click [Finish] when the Network-USB Navigator Install Complete screen is shown. The Network-USB Navigator installation is complete. WBMR-HP-G300H User Manual 120 Appendix C Network-USB Navigator Initial Setup for Macintosh Users 1 Insert the Air Navigator CD. 2 3 4 5 Double-click the CD-ROM icon which is mounted on the desktop, then double-click the Mac folder. Double-Click [USB-Navigator] > [Cosetup.app]. Click [Continue]. Click [Continue]. WBMR-HP-G300H User Manual 121 Appendix C Network-USB Navigator 6 7 8 Click [Agree]. Click [Continue]. Click [Install]. WBMR-HP-G300H User Manual 122 Appendix C Network-USB Navigator 9 10 11 Input your name and password. Click [OK]. Click [Continue Installation]. Click [Restart]. WBMR-HP-G300H User Manual 123 Appendix C Network-USB Navigator 12 1 During the first program launch only, the screen at left will appear before the main program screen is displayed. From here, you can select the behavior of this product when a USB device is detected. Select the connection behavior suited to your usage environment. 2 Click [OK]. The Network-USB Navigator installation is complete. Opening the Network-USB User Manual 1 Launch Network-USB Navigator. There are two ways to launch the program. Windows Users a) Click the task tray icon b) From the Start menu, click [(All) Programs]-[BUFFALO]-[Network-USB Navigator]-[Network-

. USB Navigator]. Macintosh Users a) Click the Dock icon b) Click [Macintosh HD]-[Applications]-[BUFFALO]-[Device Server]-[Network-USB Navigator]. WBMR-HP-G300H User Manual 124 Appendix C Network-USB Navigator 2 3 Network-USB User Manual will open. Click Page].

, then click [Manual How to use the Network-USB To configure Network-USB, refer to the Network-USB User Manual. WBMR-HP-G300H User Manual 125 Appendix D - TCP/IP Settings Windows 7 To configure TCP/IP in Windows 7, follow the procedure below. 1 2 3 4 5 6 7 8 Click [Start] > [Control Panel] > [Network and Internet]. Click [Network and Sharing Center]. Click [Change Adapter Settings] on the left side menu. Right click on [Local Area Connection], then click [Properties]. If the User Account Control screen opens, click [Yes] or [Continue]. Select [Internet Protocol Version 4 (TCP/IPv4)] then click [Properties]. Select [Obtain an IP address automatically] and [Obtain DNS server address automatically], then click [OK]. Click [OK]. WBMR-HP-G300H User Manual 126 Appendix D TCP/IP Settings Windows Vista To configure TCP/IP in Windows Vista, follow the procedure below. 1 2 3 4 5 6 7 8 Click [Start] > [Settings] > [Control Panel]. Click [Network and Sharing Center]. Click [Manage network connections] on the left side menu. Right click on [Local Area Connection], then click [Properties]. If the User Account Control screen opens, click [Yes] or [Continue]. Select [Internet Protocol Version 4 (TCP/IPv4)] then click [Properties]. Select [Obtain an IP address automatically] and [Obtain DNS server address automatically], then click [OK]. Click [Close]. WBMR-HP-G300H User Manual 127 Appendix D TCP/IP Settings Windows XP To configure TCP/IP in Windows XP, follow the procedure below. 1 2 3 4 5 6 Click [Start] > [Settings] > [Control Panel]. Double click [Network]. Right click on [Local Area Connection], then click [Properties]. Select [Internet Protocol (TCP/IP)], then click [Properties]. Select [Obtain an IP address automatically] and [Obtain DNS server address automatically], and then click [OK]. Click [Close]. WBMR-HP-G300H User Manual 128 Appendix D TCP/IP Settings Mac OS X To configure TCP/IP in Mac OS X, follow the procedure below. 1 2 3 4 5 Click [Apple menu] > [System Preferences]. Click [Network]. Click [Ethernet]. Select [Using DHCP] in the Configure IPv4 field, and click [Apply]. Close the window. WBMR-HP-G300H User Manual 129 Appendix E - Restoring the Default Configura-

tion With the AirStation powered on, hold down this button for 3 seconds to return it to factory default settings. WBMR-HP-G300H User Manual 130 Appendix F - Shared Folders and the USB Port There are several restrictions on using the AirStations USB port:

Bus powered hard drives are not supported. Always use the hard drives AC adapter. When using full-byte characters (such as Japanese), keep folder and file names within 80 characters. You may not be able to copy a folder or a file whose name length is more than 80 characters. You cannot set attributes (hidden or read-only) to folders or files on the AirStatoin. When using access restrictions, you can register up to 16 users for the AirStation. Please note that you are not allowed to use any of the following words as a user or group name:

adm, administrator, all, bin, daemon, disk, ftp, guest, halt, hdusers, kmen, lp, mail, man, news, nobody, nogroup, none, operator, root, shadow, shutdown, sshd, sync, sys, ttyusers, utmp, uucp, www. Please note that you are not allowed to use any of the following words as a shared folder name:

global, homes, printers, bittorrent, disk1_pt1, disk1_pt2, disk1_pt3, disk1_pt4, disk2_pt1, disk2_pt2, disk2_pt3, disk2_pt4, disk3_pt1, disk3_pt2, disk3_pt3, disk3_pt4, disk4_pt1, disk4_pt2, disk4_pt3, disk4_pt4. If shared folder names, work group names and file names contain any of the following characters, you may not access data or manipulate files on the AirStation properly. In such a case, use a different character. If a file created on a Macintosh contains any of the following characters, it will not be displayed correctly under Windows OS. Also, you cannot copy or properly display a file when connecting via SMB from Mac OS X if it contains any of these characters:

? [ ] / \ = + < > ; : , | *

Cancelling or aborting a file copy may leave the file incomplete, and you may no longer be able to delete the incomplete file. This can also happen during a power outage or if the LAN cable is suddenly disconnected. If it happens, restart the AirStation, delete the file, and try copying the file again. Use the same user name and password for the AirStation as the users Windows login. If they are different, the user may not be able to access shared folders with access restrictions on the AirStation. Date and Time stamps stored on the USB hard disk may be updated by the OS accessing the AirStation. File creation or access dates may not be maintained. If you display and check the size of hard drives on the browser, it shows a bigger value than when WBMR-HP-G300H User Manual 131 Appendix F Technical Detail of the USB port you see it in Windows drive properties. If you have logged in using a guest account from Windows 7, Vista, XP or 2000, access restrictions may not work properly. A guest account already exists on the AirStation by factory default. If you access a shared folder from a Macintosh computer, additional Mac OS X information files may be automatically generated. Do not delete these files from a Windows computer. Otherwise, you may no longer be able to access folders from a Macintosh. Device types that can be connected to the AirStations USB connector are; a USB hard disk, USB memory, or a USB card reader. Card readers with 5 or more slots are not supported. USB devices such as a digital cameras, CD/DVD drives, USB hubs, mice, or keyboards are not supported. Encrypted USB hard drives are not supported. Only one single drive may be connected to the AirStations USB port at a time. Drives manufactured by other companies besides Buffalo Technology are not supported. If your hard disk has an auto power mode switch, move the switch to manual or on. Leaving the switch set to auto may result in unpredictable behavior. Up to 4 partitions can be recognized on a USB hard disk. Available file systems for USB hard disks are FAT12, FAT16, FAT32, and XFS. WBMR-HP-G300H User Manual 132 Appendix G - Regulatory Compliance Informa-

tion Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Caution:

Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Important Note - FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for uncontrolled equipment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The availability of some specific channels and/or operational frequency bands are country dependent and are firmware programmed at the factory to match the intended destination. The firmware setting is not accessible by the end user. WBMR-HP-G300H User Manual 133 Appendix G Regulatory Compliance Information Europe EU Declaration of Conformity This device complies with the essential requirements of the R&TTE Directive 1999/5/EC. The following test methods have been applied in order to prove presumption of conformity with the essential requirements of the R&TTE Directive 1999/5/EC:

EN60950-1: 2006 Safety of Information Technology Equipment EN 50385: 2002 Product standard to demonstrate the compliance of radio base stations and fixed terminal stations for wireless telecommunication systems with the basic restrictions or the reference levels related to human exposure to radio frequency electromagnetic fields (110MHz - 40 GHz) - General public EN 300 328 V1.7.1 (2006-10) Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband transmission systems;

Data transmission equipment operating in the 2,4 GHz ISM band and using wide band modulation techniques; Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive EN 301 489-1 V1.8.1 (2008-04) Electromagnetic compatibility and Radio Spectrum Matters (ERM); ElectroMagnetic Compatibility

(EMC) standard for radio equipment and services; Part 1: Common technical requirements EN 301 489-17 V2.1.1 (2009-05) Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility

(EMC) standard for radio equipment and services; Part 17: Specific conditions for 2,4 GHz wideband transmission systems , 5 GHz high performance RLAN equipment and 5,8GHz Broadband Data Transmitting Systems. This device is a 2.4 GHz wideband transmission system (transceiver), intended for use in all EU member states and EFTA countries, except in France and Italy where restrictive use applies. In Italy the end-user should apply for a license at the national spectrum authorities in order to obtain authorization to use the device for setting up outdoor radio links and/or for supplying public access to telecommunications and/or network services. This device may not be used for setting up outdoor radio links in France and in some areas the RF output power may be limited to 10 mW EIRP in the frequency range of 2454 2483.5 MHz. For detailed information the end-user should contact the national spectrum authority in France. WBMR-HP-G300H User Manual 134 Appendix G Regulatory Compliance Information esky[Czech]

Buffalo Technology Inc. tmto prohlauje, e tento AirStation WBMR-HP-G300H je ve shod se zkladnmi poadavky a dalmi pslunmi ustanovenmi smrnice 1999/5/ES. Dansk[Danish]

Undertegnede Buffalo Technology Inc. erklrer herved, at flgende udstyr AirStation WBMR-HP-

G300H overholder de vsentlige krav og vrige relevante krav i direktiv 1999/5/EF. Deutsch[German]

Hiermit erklrt Buffalo Technology Inc. dass sich das Gert AirStation WBMR-HP-G300H in bereinstimmung mit den grundlegenden Anforderungen und den brigen einschlgigen Bestimmungen der Richtlinie 1999/5/EG befindet. Eesti[Estonian]

Kesolevaga kinnitab Buffalo Technology Inc. seadme AirStation WBMR-HP-G300H vastavust direktiivi 1999/5/E phinuetele ja nimetatud direktiivist tulenevatele teistele asjakohastele stetele. English Hereby, Buffalo Technology Inc. declares that this AirStation WBMR-HP-G300H is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Espaol[Spanish]

Por medio de la presente Buffalo Technology Inc. declara que el AirStation WBMR-HP-G300H cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE.

[Greek]

Buffalo Technology Inc. AirStation WBMR-HP-G300H 1999/5/. Franais[French]

Par la prsente Buffalo Technology Inc. dclare que lappareil AirStation WBMR-HP-G300H est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 1999/5/

CE. Italiano[Italian]

Con la presente Buffalo Technology Inc. dichiara che questo AirStation WBMR-HP-G300H conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE. WBMR-HP-G300H User Manual 135 Appendix G Regulatory Compliance Information Latviski[Latvian]

Ar o Buffalo Technology Inc. deklar, ka AirStation WBMR-HP-G300H atbilst Direktvas 1999/5/EK btiskajm prasbm un citiem ar to saisttajiem noteikumiem. Lietuvi[Lithuanian]

iuo Buffalo Technology Inc. deklaruoja, kad is AirStation WBMR-HP-G300H atitinka esminius reikalavimus ir kitas 1999/5/EB Direktyvos nuostatas. Nederlands[Dutch]

Hierbij verklaart Buffalo Technology Inc. dat het toestel AirStation WBMR-HP-G300H in overeenstemming is met de essentile eisen en de andere relevante bepalingen van richtlijn 1999/5/EG. Malti[Maltese]

Hawnhekk, Buffalo Technology Inc. , jiddikjara li dan AirStation WBMR-HP-G300H jikkonforma mal-

tiijiet essenzjali u ma provvedimenti orajn relevanti li hemm fid-Dirrettiva 1999/5/EC. Magyar[Hungarian]

Alulrott, Buffalo Technology Inc. nyilatkozom, hogy a AirStation WBMR-HP-G300H megfelel a vonatkoz alapvet kvetelmnyeknek s az 1999/5/EC irnyelv egyb elrsainak. Polski[Polish]

Niniejszym, Buffalo Technology Inc. , deklaruj, e AirStation WBMR-HP-G300H spenia wymagania zasadnicze oraz stosowne postanowienia zawarte Dyrektywie 1999/5/EC. Portugus[Portuguese]

Buffalo Technology Inc. declara que este AirStation WBMR-HP-G300H est conforme com os requisitos essenciais e outras disposies da Directiva 1999/5/CE. Slovensko[Slovenian]

Buffalo Technology Inc. izjavlja, da je ta AirStation WBMR-HP-G300H v skladu z bistvenimi zahtevami in ostalimi relevantnimi doloili direktive 1999/5/ES. Slovensky[Slovak]

Buffalo Technology Inc. tmto vyhlasuje, e AirStation WBMR-HP-G300H spa zkladn poiadavky a vetky prslun ustanovenia Smernice 1999/5/ES. Suomi[Finnish]

Buffalo Technology Inc. vakuuttaa tten ett AirStation WBMR-HP-G300H tyyppinen laite on direktiivin 1999/5/EY oleellisten vaatimusten ja sit koskevien direktiivin muiden ehtojen mukainen. Svensk[Swedish]

Hrmed intygar Buffalo Technology Inc. att denna AirStation WBMR-HP-G300H str I verensstmmelse med de vsentliga egenskapskrav och vriga relevanta bestmmelser som framgr av direktiv 1999/5/EG. WBMR-HP-G300H User Manual 136 Appendix G Regulatory Compliance Information Safety This equipment is designed with the utmost care for the safety of those who install and use it. However, special attention must be paid to the dangers of electric shock and static electricity when working with electrical equipment. All guidelines of this manual and of the computer manufacturer must therefore be allowed at all times to ensure the safe use of the equipment. FCC Part 68 Statement This equipment complies with Part 68 of FCC Rules and the requirements adopted by the ACTA.. On the bass unit of this equipment is a label that contains, among other information, a product identifier in the format US: ACYDL01BAR7516VW. If requested, this number must be provided to the telephone company. The REN for this product is part of the product identifier that has the format US:

ACYDL01BAR7516VW. The digits represented by 01 are the REN without a decimal point. The REN is useful to determine the quantity of devices you may connect to your telephone line and still have those devices ring when your telephone number is called. In most, but not all areas, the sum of the REN of all devices connected to one line should not exceed five (5.0). To be certain of the number of devices you may connect to your line, as determined by the REN, you should contact your local telephone company to determine the maximum REN for your calling area. If your equipment causes harm to the telephone network, the telephone company may discontinue your service temporarily. If possible, they will notify you in advance. If advance notice is not practical, you will be notified as soon as possible. You will be informed of your right to file a complaint with the FCC. Your telephone company may make changes in its facilities, equipment, operations or procedures that could affect the proper functioning of your equipment. If they do, you will be notified in advance to give you an opportunity to maintain uninterrupted telephone service. If you experience trouble with this telephone equipment, please contact the following address and phone number for information on obtaining service or repairs:

The telephone company may ask that you disconnect this equipment from the network until the problem has been corrected or until you are sure that the equipment is not malfunctioning. This equipment may not be used on coin service provided by the telephone company. Connection to party lines is subject to state tariffs. Buffalo Technology (USA) Inc. 11100 Metric Boulevard, Suite 750, Austin, TX 78758 USA TEL:1-800-688-7466 WBMR-HP-G300H User Manual 137 Appendix H - Environmental Information The equipment that you have purchased has required the extraction and use of natural resources for its production. The equipment may contain hazardous substances that could impact health and the environment. In order to avoid the dissemination of those substances in our environment and to diminish the pressure on the natural resources, we encourage you to use the appropriate take-back systems. The take-back systems will reuse or recycle most of the materials of your end life equipment in a sound way. The crossed-out wheeled bin symbol invites you to use those systems. If you need more information on the collection, reuse and recycling systems, please contact your local or regional waste administration. WBMR-HP-G300H User Manual 138 Appendix I - GPL Information The source code for Buffalo products that use GPL code is available at http://opensource.buffalo.jp/ . WBMR-HP-G300H User Manual 139 Appendix J - Warranty Information Buffalo Technology (Buffalo Inc.) products come with a two-year limited warranty from the date of purchase. Buffalo Technology (Buffalo Inc.) warrants to the original purchaser the product; good operating condition for the warranty period. This warranty does not include non-Buffalo Technology

(Buffalo Inc.) installed components. If the Buffalo product malfunctions during the warranty period, Buffalo Technology/(Buffalo Inc.) will, replace the unit, provided the unit has not been subjected to misuse, abuse, or non-Buffalo Technology/(Buffalo Inc.) authorized alteration, modifications or repair. All expressed and implied warranties for the Buffalo Technology (Buffalo Inc) product line including, but not limited to, the warranties of merchantability and fitness of a particular purpose are limited in duration to the above period. Under no circumstances shall Buffalo Technology/(Buffalo Inc.) be liable in any way to the user for damages, including any lost profits, lost savings or other incidental or consequential damages arising out of the use of, or inability to use the Buffalo products. In no event shall Buffalo Technology/(Buffalo Inc.) liability exceed the price paid for the product from direct, indirect, special, incidental, or consequential damages resulting from the use of the product, its accompanying software, or its documentation. Buffalo Technology (Buffalo Inc.) does not offer refunds for any product.

@ 2003-2010 Buffalo Technology (Buffalo, Inc.) WBMR-HP-G300H User Manual 140