NDC1A00 Wireless Transceiver Users Manual

Operating Instructions Network Date Collector Model No. NDC-01 1 Contents:

Introduction..3 Warranty Policy...3 Safety precautions..3 Use Precautions..4 Accessories Confirmation..5 Unit parts and functions..6 Basic operations..8 Specifications..9 2 Introduction:

Thank you for purchasing ARCT NDC-01 Transmitter. This operating instruction is for ARCT NDC-01 Transmitter. Before connecting and operating pager, please read following instructions completely, and save this manual for future use. Model: NDC-01 Contains FCC ID: 2ADKH-NDC1A00 Here by, we declare this device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Warranty Policy:

The warranty period is 12 months of service time from date of invoice.

(For further warranty period, please contact your distributor or dealer) Note:

The following damages are not covered by the warranty, including dropping, water contact or any other wrong use, other than the purpose designed for. Safety precautions:

To prevent severe injury and loss of life/property, read this section carefully before using the unit to ensure proper and safe operation of your unit. The section explains the graphic symbols used in this manual. Denotes a potential hazard that could result in serious injury or death. 3 Transmitter :NDC-01 Do not use this equipment close to automatic control equipment like automatic door fire alarm and so on. Radio waves from this equipment may cause the trouble by a malfunction for medical equipment or automatic equipment. Use only the specified AC adaptor with this product. Using unspecified AC adaptor may cause smoke or fire. Do not touch AC adaptor and power cable during lighting storms. There is the risk of electric shock. Do not pull or insert the power plug with wet hands. Failure using may cause electric shock. Do not exceed the ratings of AC outlet and wirings, and connect the AC adaptor only within 110~240V AC. Exceeding the rating may result in overheating and fire. Do no attempt to disassemble or modify this product. Failure using may cause fire or electric shock. Use Precautions:

Read the following instructions to use this product correctly. Staff paging transmitter Do not open or modify the main unit case. Operation environment and service place Do not leave this product in a place exposed to high temperature or excessive dust. Do not put this product where static is likely to be generated or where magnetism generating devices such as TV set and radio are nearby. Do not leave this product under direct sunshine or at excessive high or low temperatures of long time. Protect this product form rain or water Mounting the antenna near any large metal objects will minimize the operation range. How to maintain the device:

Be sure to turn off the power before maintenance. Use a dry soft cloth to remove dirt from this product. When stubborn stains are observed, use a tightly twisted water soaked cloth to wipe the point softly and use dry another cloth to wipe the point again. Do not use thinner, benzene, wax, kerosene, polish, hot water, chemical cloth and the like. The dirty connector may cause communication failure. 4 Accessories Confirmation:

Before using, examine the following accessories. If there missing any items, please contact your dealer. Main unit:

Antenna:

5V/3A power adaptor 5 Unit parts and functions:

Main unit(front side) The following illustration shows the layout of keys 5 4 No Name Details 1 2 3 POWER POWER LED, indicate the transmitter has been turned on TX/RX Channel 1, Dual color LED, indicate the CH1 TX/RX state Cloud-LINK Reserve, for ARCT- Cloud version USB JACK 4 USB Ports Ethernet 10/100 Mbps Ethernet port 6 1 2 3 4 5 Main unit(back side) 7 6 No Name Details ANTENNA 2 CH2, SMA Antenna Jack DC IN 5V/3A DC input 7 6 7 System Installations Hardware Installation LCD monitor To connect the gateway to the LCD monitor, please follow the steps in the picture below. Hardware Installation LAN mode with Android Tablet To connect the NDC-01 to Android tablets, please follow the steps in the figure below. 8 Specifications NDC-01 Transmitter Item Frequency Baud rate:

Modulation type Output power Maximum Dev. Channel Spacing Harmonic Radiation Frequency stability Output connector Current consumption Power supply Operating temperature Operating humidity Dimension Weight Certification Specifications 433~434MHz 1200 bps FSK 10mWatt

+/- 2.5K 12.5K Less -25dBm 2ppm at -10~+60 SMA(F) Standby: 200mA ; Transmit: 500mA 5V/3A adapter

-10~+60 20% RH to 80% RH(no condensation) Approx. 138mm x90mm x 30 mm Approx. 390 g 9