QBREMOTE QBee Remote Control User Manual

Whats in the box 1 Start 2 Connect QBee Gateway QBee on TV 3 Insert Batteries ACCESSORIES OR Ethernet /

Router Power Supply 1 L A N 2 I n t e r n e t D C 1 2 V H D M I R e s e t HDMI / TV Your TV can be your QBee command, entertainment and control center. You decide what tiles you see, what colour they are and in which order you see them. Each tile is a function and gives you a certain information. And to control it all, you can use the QBee remove control or the virtual remote control on the Mobile App. 4 Turn on TV TV Remote HDMI Input 1 4 4 2 5 5 3 6 6 Gateway Switch Remote Multi-Sensor Camera Accessories Box Gateway Power Supply Camera Power Supply Ethernet Cable HDMI cable To use QBee, you need A high-definition TV with HDMI capable of displaying 720p or 1080p video or a smartphone with Apple iOS 7 or higher / Android 4.2 or higher A broadband Internet connection (DSL, cable, or LAN) Plug your QBee Gateway into a power outlet, connect it to your router with the Ethernet cable and connect to your television with the HDMI cable. If you do no want to use/connect QBee with a TV then please go to step 5 . Insert the batteries into your QBee remote control and press any button. Turn on your TV, then select the HDMI input thats connected to your QBee Gateway. On some televisions, this may occur automatically. Get started with QBee 5 Set-up QBee Gateway 6 Download QBee App QBee App 7 Start App 8 Enjoy QBee Power ON/OFF 1 L A N 2 I n t e r n e t H D M I The QBee App is available for Your QBee App is your command, entertainment and control center. You decide what tiles you see, what colour they are and in which order you see them. Each tile is a function and gives you a certain information. And its also a virtual remote control for QBee on TV. QBee Media Connected Home Remote 29 C Taipei Settings Welcome Turn on your QBee Gateway and follow the on-screen instructions. A series of screens assists you with the setup. Please download the App from one of the App-Stores. Create an account and follow the on-screen instructions to connect the QBee Gateway with your account. Power-on the Switch and the Camera and they will appear on your mobile and/or TV screen. Discover more / Support Discover more QBee features on the back of this user manual or online at www.shiftcontrolplay.com QBee support is available on the back of this user manual or online at www.shiftcontrolplay.com To contact QBee support go to www.shiftcontrolplay.com/contact www.shiftcontrolplay.com Play your own content Configure QBee Gateway You have the possibility to configure the network settings of your QBee Gateway via the embedded Web UI. To do so, connect your computer to your Gateway by using an Ethernet cable and inserting it into the Gateways Internet Port at the back. Log into the QBee Web UI 1 On your web browser, enter the QBee Gateways default IP address 192.168.1.1 2 On the login page, enter the default user name

(admin) and password (admin). 3 You can configure the settings of your QBee Gateway. QBee allows you to play and view your favourite content in any format. SD card Insert your SD card and view whats on it and sync its contents to the built-in hard drive with the push of one button. USB port Insert your USB drive into the blue USB port at the back of the QBee Gateway you can view and play your content directly from your USB drive. Web Services play and view content from the Internet. YouTube, Spotify and The Onion are already configured for you. QBee Mobile App Upload the content from the App via Media/File Section. PC/Mac Copy the content from your computer via Windows/Samba (SMB) or Mac (AFP). Troubleshooting Gateway Devices QBee Gateway Remote Camera Switch QBee Home Button No image on TV Check that the Power and HDMI cables are properly connected. Power the Gateway off and on again. Check the input source on the TV Reconnect Switch or Camera In case the Switch or the Camera loses the connection to your QBee Gateway, they have to be paired with the Gateway again. No content in the media library Please refer to section Play your on content of this manual. Pairing To do so, press the WPS button of your QBee Gateway for 2 seconds. The LED on the Gateway will start blinking in white. LED Remote Remote not working / New remote Remove the batteries from your remote control. Press the OK button on your remote and then reinsert the batteries. Reconnect the QBee Gatewy to the remote. Press and hold the WPS button on the Gateway for three seconds. Done. WPS Button 1 L A Then press the WPS button on the Switch or Camera for 2 seconds. WPS Button WPS Button Not powered OK SD Card syncing LED Off White Blinks white fast Blinks white slowly WPS Pairing in progress Red Blinks red Booting Problem / Not connected Sync Button SD Card Slot OK Back Menu Navigation Play/Pause Volume Up Favorites Volume Down The LED on the Switch or Camera will start blinking in white. When the pairing is done, the LED will light continuously in white. Power ON/OFF WPS Button If the pairing of the Switch or Camera does not work, please reset your Switch or Camera by pushing the WPS button for 10 seconds. This will restore your Switch or Camera to factory settings. Once the reset is complete, please repeat the Pairing process. LAN Internet USB 3.0 for Media Power Supply 1 L A N 2 I n t e r n e t D C 1 2 V H D M I R e s e t HDMI > TV Headset / Stereo USB Keyboard/

Mouse Reset Press 2 s Lens Night Vision LEDs Temperature Sensor Humidity Sensor LED Ambient Light Sensor LED Off White Blinks white Red Blinks red Not powered OK WPS Pairing in progress Booting Problem / Not connected Privacy Button (on top) LED White > Privacy on Power ON/OFF WPS Button Power Supply Camera Stand Slide up and turn 90 for Wall-Mount WPS Button Pairing Reset Reconnect the Camera press 2 s Sets the Camera to its factory settings. Pairing is lost Press 10 s LED blinks red fast LED LED Off White Blinks white Red Blinks red Not powered OK WPS Pairing in progress Booting Problem / Not connected ON/OFF Button WPS Button WPS Button Pairing Reset Reconnect the Switch press 2 s Sets the Switch to its factory settings. Pairing is lost Press 10 s LED blinks red fast v1 122015 Security & Safety Information & Warnings Federal Communications Commission (FCC) Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generate, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. RF exposure warning This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter. European Union Regulatory Conformance The equipment complies with the RF Exposure Requirement 1999/5/EC; Council Recommendation of 12 July 1999 on the limitation of exposure of the general public to electromagnetic fields (0300 GHz). Changes or modifications to this product not authorized by our company could void the EMC compliance and negate your authority to operate the product. This product has demonstrated EMC compliance under conditions that included the use of compliant peripheral devices and shielded cables between system components. It is important that you use compliant peripheral devices and shielded cables between system components to reduce the possibility of causing interference to radios, televisions, and other electronic devices. This equipment meets the following conformance standards:

EN 301489-1/-17, EN 55022, EN 55024 EN 300328, EN 301893 EN 62311 EN 60950-1 The device complies with RF specifications when the device used at 20cm form your body. WLAN function of this device is restricted only to indoor use when operating in the 5150 to 5350 MHz frequency range. MPE MPE 1mW/cm234cm 5.15~5.25GHz