Hanchett Entry Systems 10027 S. 51st Street, Ste 102 Phoenix, AZ 85044 Tel +1 623-582-4626 April 18, 2023 Federal Communications Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 Subject: Class II Permissive Change To Whom It May Concern:
This is to request a Class II permissive change for FCC ID: Y88-MBM1CC2640, originally granted on 03/23/2016. We changed the following points from the original model:
o Added a new installation use case for use of module FCC ID: Y88-MBM1C2640 in module FCC ID: VC3-DR100V3. o The FCC ID: Y88-MBM1C2640 module can simultaneously transmit with module FCC ID:
VC3-DR100V3 Both the FCC ID: Y88-MBM1C2640 and FCC ID: VC3-DR100V3 are used in host device model numbers DR100. Meanwhile, we submit the following documents related to this change. There is no change before and after this change except for these documents. Test Report External Photo Internal Photo User Manual Label Drawing / Location Block Diagram Schematic Diagram Parts List Please note that, this module is to be installed only by us in our end products and will not be marketed to any other party. Installation will be under our control and therefore full compliance of the end product will always be ensured. Hanchett Entry Systems 10027 S. 51st Street, Ste 102 Phoenix, AZ 85044 Tel +1 623-582-4626 Additional Q&A Related to Limited Modular Approval Pre-Approval Guidance (PAG) (KDB 388624 D01 v11r04) Q. How will new hosts in the future be handled?
RFID fundamental levels and all radiated spurious emissions will be checked for each future host. Q. Will the module be certified as stand alone or host dependent?
The module will be certified as host dependent with test results in a specific host. Q. Will this module be available for sale or will it be used solely by the grantee?
The module will be used by the grantee (HES) in their end products only. Installation will be under full control of the grantee in the end product only. Q. Will there be clear and complete module integration instructions in the module manual?
The module will be integrated by the grantee (HES) at their manufacturing plant, therefore detailed installation instructions should not be necessary in the module user manual that will be part of the certification application package to the TCB. HES does not, nor does it intend to, sell or supply the module to any other divisions, factories, or plants within ASSA ABLOY. If you have any questions, please feel free to contact me at the address or telephone number shown below. Sincerely, Baruch Spence Principal Engineer ASSA ABLOY EMS&OEM Group 10027 S. 51st Street, Suite 102 Phoenix, AZ 85044 Phone: +1 623-582-4626 x7137 Fax: +1 623-434-1658 Email: baruch.spence@assaabloy.com