| submitted | available | document details (if available) | source link |
|---|---|---|---|
| February 18 2014 | February 18 2014 |
| various | User Manual | Users Manual | 2.03 MiB | February 18 2014 |
N300 Wi-Fi RANGE EXTENDER User Manual F9K1015v1 8820-01753 Rev. A00 Table Of COnTenTs Getting started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Regulatory Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22 FCC Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 IC Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Whats in the Box. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Initial Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Set Up Your Range Extender Wirelessly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Wired Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Getting to Know Your Wi-fi Range extender . . . . . . . . . . . . . . . . . . . . . . 5 Technical Details . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 advanced settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Resetting the Wi-fi Range extender . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Troubleshooting, support, and Warranty . . . . . . . . . . . . . . . . . . . . . . . . 17 Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Technical Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Belkin International, Inc., Limited 2-Year Product Warranty . . . . . . . . . . .20 GeTTInG sTaRTeD Congratulations on buying an N300 Wi-Fi Range Extender (the Range Extender). This device will enable you to extend the range of your dual-band router to eliminate dead spots in your wireless network. The Range Extender extends your 2.4GHz network. Whats in the box N300 Wi-Fi Range Extender Quick Installation Guide User Manual on CD Initial setup To get started, you will need:
Your primary wireless router, its network name (SSID), and password. A personal computer with a web browser 1 GeTTInG sTaRTeD set Up Your Range extender Wirelessly step 1 step 2 Find a spot that receives about half of your routers Wi-Fi signal. Find a power outlet near that spot and plug in your Range Extender. Belkin.setup Agness home wi-fi MyNetwork belkin.f84 http://Belkin.range 2 Belkin.setup Agness home wi-fi MyNetwork belkin.f84 http://Belkin.range GeTTInG sTaRTeD step 3 step 4 On your device, connect to the Wi-Fi network belkin.setup Complete setup by opening browser to:
On Windows Vista or Windows 7, please check the option Connect Automatically when you select the network. Belkin.setup Agness home wi-fi MyNetwork belkin.f84 Belkin.setup Agness home wi-fi MyNetwork belkin.f84 http://Belkin.range http://Belkin.range 3 GeTTInG sTaRTeD How to reset the Range extender and get it connected if you change your routers network name or password:
step 1: Locate the Range Extenders reset button on the base of the unit. step 2: With the unit still powered on, press and hold the Range Extenders reset button for 10 seconds. step 3: Connect your computer to the Belkin.setup wireless network. Make sure nothing is plugged into your Ethernet port. step 4: In your Internet browser, open the address http://Belkin.range and follow the on-screen instructions. 4 GeTTInG TO KnOW YOUR Wi-fi RanGe exTenDeR a) Wi-fi Protected setup (WPs) light and button (not pictured) The WPS button on the top of your Range Extender can be used to help establish a secure connection between your Range Extender and other WPS-enabled Wi-Fi devices such as computers. To use the WPS feature on your Range Extender, see Advanced Settings > Wi-Fi Protected Setup > Using Wi-Fi Protected Setup. The small LED light near the WPS button shows what is happening while you are using WPS to establish a connection. Off: Idle blinking blue: The Range Extender is listening for a WPS-enabled computer or other device. solid blue: The Range Extender has made a secure connection with the computer or other device. 5 blinking amber: A connection was not created. b) status light Your Range Extenders status is shown by the light on the front. Off: The Range Extender is not plugged into a power source. blinking blue: The Range Extender is starting up. solid blue: The Range Extender is connected to the Wi-Fi network. solid amber: The Range Extender is connected to the Wi-Fi network but is experiencing a weak signal. A weak signal may lead to performance problems. Consider moving the Range Extender closer to the wireless router. blinking amber: The Range Extender is not connected to the Wi-Fi network. Check to make sure that your wireless router is functioning properly, and/or move the Range Extender closer to the wireless router. alternating blue/amber: The Range Extender is ready to be set up.
(Refer to Getting Started for instructions on how to set up your Range Extender.) C) Reset button (not pictured) This button is used to restart your Range Extender in rare cases when it functions incorrectly. Resetting the Range Extender will preserve your settings. This button may also be used to restore the factory default settings. Please see the Troubleshooting section for more information. TeCHnICal DeTaIls system Requirements specifications 802.11/b/g/n 2.4GHz wireless router with broadband Internet connection At least one computer with:
- Installed wireless network interface card and TCP/IP protocol
- Windows XP 32 (SP3 or greater), Windows Vista 32/64, or Windows 7 32/64; or Mac OS X v10.5 or above
- Internet Explorer v7 or above, Firefox, Google Chrome, or Safari
- Minimum 1.8GHz processor
- Minimum 512MB RAM Wireless Standards with Link Rate
- IEEE 802.11n (up to 300Mbps for 2.4GHz)
- IEEE 802.11g (up to 54Mbps*)
- IEEE 802.11b (up to 11Mbps*) Wireless Operating Spectrum:
- 2.4GHz Wireless Security:
- Wi-Fi Protected Setup
- 256-bit WPA/WPA2 encryption
- 64/128-bit WEP encryption 6 aDvanCeD seTTInGs Connecting to the Web Interface When you are connected to your Range Extender, you can access the Range Extenders Web-Based Advanced User Interface (UI) using your Internet browser. In your browser, type belkin.range. Then press the Enter key. http://Belkin.range 7 aDvanCeD seTTInGs The status Page This page shows the detailed status of your Range Extender. The meaning of the various items is detailed below. 1 1 . Quick-navigation links You can go directly to any of the Range Extenders advanced UI pages by clicking directly on these links. 2 . language Shows the active language for the Advanced User Interface. Select the desired language by clicking one of the available languages. 3 . version Info The Version Info section gives you information on the hardware part number, version number, firmware version, and serial number. Belkin Technical Support may ask you for this information in certain troubleshooting situations. 4 . features This section details whether the WPS function is enabled or disabled. 5 . 2 .4GHz extender These sections provide detailed information on the extended network. 4 3 5 2 8 aDvanCeD seTTInGs logging into the firmware The Range Extenders home page is visible to any user who wants to see it. To make any changes to the Range Extenders settings, you have to log in. Clicking on any one of the links on the home page will take you to the login screen. The Range Extender ships with no password entered. In the login screen, leave the password blank and click the Submit button to log in. 9 aDvanCeD seTTInGs Configuring the 2 .4GHz Wireless Connection This option will change the settings for the Range Extenders connection to your main 2.4GHz network. You can use this option for the following tasks:
Connecting to a different wireless network Updating the settings after youve changed the wireless settings
(e.g., security type or password) on your Range Extender Click on the 2.4GHz Wireless Connection link on the left side of the screen. The Range extender will provide the following options:
network name (ssID) This is the name of the 2.4GHz network you wish to extend. security Type You must specify the type of security for your Range Extender (WPA2, WPA, WEP, or None). Password (Key) This is the password or passkey that you normally use to connect to your wireless router. 10 aDvanCeD seTTInGs extended network settings These options enable you to configure your Extended Networks. ssID settings This screen enables you to configure the SSID, security, and other features of your Extended Network. We recommend accepting the default values here, which will mirror your main network. However, if you wish to change settings for the Extended Network, you can do so here. 11 aDvanCeD seTTInGs for the network, you may configure the following:
network name (ssID) This is the name of your extended Wi-Fi Range Extender as it will show up when you try to connect to it from a laptop, tablet, etc. broadcast ssID Note: This advanced feature should be employed by advanced users only. For security, you can choose not to broadcast your extended networks SSID. Doing so will keep your network name hidden from computers that are scanning for the presence of wireless networks. To turn off the broadcast of the SSID, remove the check mark from the box next to Broadcast SSID, and then click Apply Changes. The change is immediate. Each wireless computer or device now needs to be set to connect to your specific SSID. Refer to the documentation of your computer, tablet, or other device. Protected Mode Protected mode ensures proper operation of draft 802.11n-compliant devices on your wireless network when 802.11g or 802.11b devices are present or when there is heavy 802.11g or 802.11b traffic in the operating environment. Use protected mode if your network consists of a mix of Belkin Double N+ Wireless Cards and 802.11g or 802.11b cards. If you are in an environment that includes little to no 802.11g or 802.11b wireless network traffic, you will achieve the best wireless performance with protected mode OFF. Conversely, in an environment with HEAVY 802.11g or 802.11b traffic or interference, you will achieve the best wireless performance with protected mode ON. This will ensure wireless performance is not affected. 802 .11e/WMM Qos 802.11e/WMM QoS is a feature that prioritizes the traffic on your wireless network based on the type of traffic. We recommend leaving this enabled for optimal performance. 12 aDvanCeD seTTInGs security This screen enables you to change the wireless security settings such as WPA or WEP. We recommend leaving the settings you used when you went through the Setup Wizard. By default, your Range Extender will use the same security settings as your main network. However, if you wish, you may specify different security settings here. security Type: You may specify the type of security here. Available options are WPA2/WPA, WEP, and None (no security). We recommend you use the same type of security as your main router. Password (Key):
For WPA2 security, this can be any set of characters from 8 to 63 characters in length, (only accept printable ASCII characters). For WEP security, this must be a string of hex characters (0-9 or A-F).
(If you specify None for the security, this field will be hidden.) We recommend you use the same password as your main router. Obscure password:
If this box is checked, the password will be obscured in your browser so that others cannot see it when you type it in. 13 aDvanCeD seTTInGs Wi-fi Protected setup Your Wi-Fi Range Extender supports the Wi-Fi Protected Setup
(WPS) specification, which simplifies the setup of a wireless network. WPS uses familiar methodologies, such as typing in a Personal Identification Number (PIN) or pushing a button, to enable users to automatically configure network names and strong WPA/WPA2 data encryption and authentication. Using Wi-fi Protected setup Belkin recommends that you set up WPA2 as your wireless security. WPS does not provide additional security, but rather simplifies the addition of wireless devices to your wireless network. You may use either the Push Button Configuration (PBC) method or PIN method to allow a device access to your wireless network. PbC: Push and hold the WPS button located on the front of your Range Extender for two seconds and the security LED will flash, indicating that WPS has been initiated. Then, initiate WPS on the client device within two minutes (refer to your clients documentation on this procedure). The wireless device and Range Extender will automatically exchange a security key and establish a secure connection. PIn: The client device has a WPS PIN number (eight digits) that will be provided to you when you initiate the connection to the Range Extender. Enable WPS through the screen illustrated to the below. Enter the clients PIN into the Range Extenders internal registrar (accessed through this screen). The client will be securely enrolled into your wireless network within two minutes. 14 ReseTTInG THe Wi-fi RanGe exTenDeR Restart your Wi-fi Range extender Restoring factory Defaults In some situations, it may be necessary to restore factory defaults;
this will restore the unit to the settings when you pulled it out of the box. If you do this, youll need to set it up again. 15 ReseTTInG THe Wi-fi RanGe exTenDeR Updating the Range extenders firmware via the Web Interface The following steps show you how to update your Wi-Fi Range Extenders firmware using its web interface. Click the button to Check for Firmware Updates. This will show you whether there is new firmware available. Download the firmware file and save it to your PC. Click Choose Update File; a box will open up. Select the firmware file you just downloaded. Click Update Firmware. 16 TROUblesHOOTInG, sUPPORT, anD WaRRanTY Troubleshooting The Range extender is having trouble connecting to your wireless network . belkin setup cannot find my Wi-fi Range extender . blinking amber leD If Belkin Setup is not able to communicate with your Wi-Fi Range Extender during the installation process, please make sure that the Range Extender is powered on. This indicates that the Wi-Fi Range Extender is not connected to your wireless network. Please move the Range Extender closer to your router. solid amber leD This indicates that the Wi-Fi Range Extender is connected to your wireless network but the signal is weak. You might experience slower performance. Please move the Range Extender closer to your router. 17 TROUblesHOOTInG, sUPPORT, anD WaRRanTY My wireless network performance is slow, inconsistent, suffers from weak signal, or Im having difficulty maintaining a connection with my wireless network . Wireless technology is radio-based, which means connectivity and the throughput performance between devices decreases when the distance between devices increases. Other factors that will cause signal degradation (metal is generally the worst culprit) are obstructions such as walls and metal appliances. Note also that connection speed may decrease as you move your computer farther away from the Range Extender. Finally, note that all your wireless devices are sharing the same network. So, if you have another device that is generating a lot of network traffic (for example, transferring large files) that will compromise the performance of other devices on the network. Try moving high-traffic devices closer to the Range Extender, or try wiring them to your router with an Ethernet cable. Reset button The Reset button is used in rare cases when the Range Extender may function improperly. Resetting the Range Extender will restore the Range Extenders normal operation while maintaining the programmed settings. You can also restore the factory default settings by using the Reset button. Use the restore option in instances where you may have forgotten your custom password. Resetting the Wi-fi Range extender Push and release the Reset button. The light on the Range Extender will momentarily flash and then become solid again, indicating that the reset is complete. Restoring Your Range extender to factory Defaults Press and hold the Reset button for at least 10 seconds, and then release it. The light on the Range Extender will momentarily flash and then will begin to blink. When the light becomes solid again, the restore is complete. 18 TROUblesHOOTInG, sUPPORT, anD WaRRanTY Technical support Us http://www.belkin.com/support UK http://www.belkin.com/uk/support australia http://www.belkin.com/au/support new Zealand http://www.belkin.com/au/support singapore 1800 622 1130 europe http://www.belkin.com/uk/support 19 TROUblesHOOTInG, sUPPORT, anD WaRRanTY belkin International, Inc ., limited 2-Year Product Warranty What this warranty covers . Belkin International, Inc. (Belkin) warrants to the original purchaser of this Belkin product that the product shall be free of defects in design, assembly, material, or workmanship. What the period of coverage is . Belkin warrants the Belkin product for two years. What will we do to correct problems?
Product Warranty. Belkin will repair or replace, at its option, any defective product free of charge (except for shipping charges for the product). Belkin reserves the right to discontinue any of its products without notice, and disclaims any limited warranty to repair or replace any such discontinued products. In the event that Belkin is unable to repair or replace the product (for example, because it has been discontinued), Belkin will offer either a refund or a credit toward the purchase of another product from Belkin.com in an amount equal to the purchase price of the product as evidenced on the original purchase receipt as discounted by its natural use. What is not covered by this warranty?
All above warranties are null and void if the Belkin product is not provided to Belkin for inspection upon Belkins request at the sole expense of the purchaser, or if Belkin determines that the Belkin product has been improperly installed, altered in any way, or tampered with. The Belkin Product Warranty does not protect against acts of God such as flood, lightning, earthquake, war, vandalism, theft, normal-use wear and tear, erosion, depletion, obsolescence, abuse, damage due to low voltage disturbances (i.e. brownouts or sags), non-authorized program, or system equipment modification or alteration. How to get service . To get service for your Belkin product you must take the following steps:
1 . Contact Belkin International, Inc., at 12045 E. Waterfront Drive, Playa Vista, CA 90094, Attn: Customer Service, or call (800)-223-5546, within 15 days of the Occurrence. Be prepared to provide the following information:
a. The part number of the Belkin product. b. Where you purchased the product. c. When you purchased the product. d. Copy of original receipt. 2 . Your Belkin Customer Service Representative will then instruct you on how to forward your receipt and Belkin product and how to proceed with your claim. Belkin reserves the right to review the damaged Belkin product. All costs of shipping the Belkin product to Belkin for inspection shall be borne solely by the purchaser. If Belkin determines, in its sole discretion, that it is impractical to ship the damaged equipment to Belkin, Belkin may designate, in its sole discretion, an equipment repair facility to inspect and estimate the cost to repair such equipment. The cost, if any, of shipping the equipment to and from such repair facility and of such estimate shall be borne solely by the purchaser. Damaged equipment must remain available 20 This warranty gives you specific legal rights, and you may also have other rights, which may vary from state to state. Some states do not allow the exclusion or limitation of incidental, consequential, or other damages, so the above limitations may not apply to you. DeClaRaTIOn Of COnfORMITY WITH fCC RUles fOR eleCTROMaGneTIC COMPaTIbIlITY We, Belkin International, Inc., of 12045 E. Waterfront Drive, Playa Vista, CA 90094, declare under our sole responsibility that the device, f9K1015v1, complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. TROUblesHOOTInG, sUPPORT, anD WaRRanTY for inspection until the claim is finalized. Whenever claims are settled, Belkin reserves the right to be subrogated under any existing insurance policies the purchaser may have.Belkin reserves the right to review the damaged Belkin product. All costs of shipping the Belkin product to Belkin for inspection shall be borne solely by the purchaser. If Belkin determines, in its sole discretion, that it is impractical to ship the damaged equipment to Belkin, Belkin may designate, in its sole discretion, an equipment repair facility to inspect and estimate the cost to repair such equipment. The cost, if any, of shipping the equipment to and from such repair facility and of such estimate shall be borne solely by the purchaser. Damaged equipment must remain available for inspection until the claim is finalized. Whenever claims are settled, Belkin reserves the right to be subrogated under any existing insurance policies the purchaser may have. How state law relates to the warranty . THIS WARRANTY CONTAINS THE SOLE WARRANTY OF BELKIN. THERE ARE NO OTHER WARRANTIES, EXPRESSED OR, EXCEPT AS REQUIRED BY LAW, IMPLIED, INCLUDING THE IMPLIED WARRANTY OR CONDITION OF QUALITY, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, AND SUCH IMPLIED WARRANTIES, IF ANY, ARE LIMITED IN DURATION TO THE TERM OF THIS WARRANTY. Some states do not allow limitations on how long an implied warranty lasts, so the above limitations may not apply to you. IN NO EVENT SHALL BELKIN BE LIABLE FOR INCIDENTAL, SPECIAL, DIRECT, INDIRECT, CONSEQUENTIAL OR MULTIPLE DAMAGES SUCH AS, BUT NOT LIMITED TO, LOST BUSINESS OR PROFITS ARISING OUT OF THE SALE OR USE OF ANY BELKIN PRODUCT, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. 21 REGULATORY INFORMATION FCC Statement Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generate, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o(cid:31) and on, the user is encouraged to try to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit di(cid:31)erent from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. IC Statement:
This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numrique de la classe B conforme la norme NMB-003 du Canada. This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes : (1) lappareil ne doit pas produire de brouillage, et (2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. 22 REGULATORY INFORMATION Cet appareil et son antenne (s) ne doit pas tre co-localiss ou fonctionnement en association avec une autre antenne ou transmetteur. IMPORTANT NOTE:
IC Radiation Exposure Statement:
This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. NOTE IMPORTANTE: (Pour lutilisation de dispositifs mobiles) Dclaration dexposition aux radiations:
Cet quipement est conforme aux limites dexposition aux rayonnements lC tablies pour un environnement non contrl. Cet quipement doit tre install et utilis avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. 23 2014 Belkin International, Inc. All rights reserved. All trade names are registered trademarks of respective manufacturers listed. Mac OS and Safari are trademarks of Apple Inc., registered in the U.S. and other countries. Windows, Windows Vista, and Internet Explorer are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
This product uses the FCC Data API but is not endorsed or certified by the FCC