SP770 Amplifier Speaker User manual

Bluetooth Speaker with Drum MODEL NO.: SP770 INSTRUCTION MANUAL FCC ID: RSB-SP770

* The picture is only provided for reference. Please refer to the actual unit!

SYLVANIA is a registered trademark of OSRAM Sylvania Inc. used under license. Instructions for use Please read all instructions carefully Getting started Remove the unit from the box Remove any packaging from the product Place the packaging inside the box and store for safekeeping In the box Bluetooth Speaker with Drum Kit AC/DC Adaptor Instruction Manual Drum sticks Features 7 drum pads DJ sound eects Bluetooth wireless connection functionality Speaker lights With USB and SD card support 5 bands equalizer control Built in FM radio 3.5MM aux in jack Microphone input Guitar input Product Diagram TOP:

VOL-

VOL+

PLA Y REC REC STANDBY GT.IN MIC.IN DRUMSTYLE DJ MODE S T O P D E M O A U X U S B / C A R D 62Hz 250 Hz 1KHz 4KHz 16KHz M O D E MUSIC.VOL MIC ECHO MIC/

GT.VOL 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 MIC.IN GT.IN STANDBY VOL-

Drum pad Drum pad Drum pad Drum pad Drum pad Drum pad Drum pad VOL+

SD card port USB port Aux input MODE Vol +-

Echo +-

MIC/GT +-

STOP Demo REC DJ eects LED display Record light Play DJ MODE DRUM STYLE EQUALIZER GRAPHIC Microphone input Guitar input Switch device into/out of standby mode Reduce volume of drum eects Drum pad (Closed Hi-hat) Drum pad (Ride) Drum pad (TOM2) Drum pad (TOM1) Drum pad (Crash cymbal) Drum pad (Snare drum) Drum pad (Bass drum) Increase volume of drum eects SD card port USB port Aux input (3.5mm) Start/stop playback Select mode playback made (AUX/Bluetooth/USB/SD/FM) Play next track/channel Master volume controller Play previous track//channel Microphone echo eect controller Microphone/Guitar volume controller Stop demo songs playback Play pre-installed demo songs Drum eects record (Up to 800 notes DJ sound eect knob LED display REC light up red during recording Play record drum eects DJ sound eects mode select (11 modes) Modify drum eect pitch Make equalizer settings 1 2 3 1 2 3 FM antenna Power switch DC in socket FM antenna Switch device of/o power supply (DC 15V) INSTRUCTION FOR USE Connecting the power Plug the DC jack of AC/DC adaptor into the DC socket of the unit. Turning on/o the speaker Switch the POWER switch on the rear of the speaker to the ON position to switch the device on. Press the standby button the top panel to turn on/o the unit. Drum eects There are seven drum eect pressure pads on the top of the speaker that you can use to generate various drum eects. Press one or more of the seven drum eect pressure pads to generate various Drum eects. pads. Press the DRUM STYLE button to select various sound eects for the drum eect pressure Press the VOL+ button to increase the volume of the drum eects and the VOL- button to decrease the volume of the drum eects. Record drum eects You can record the drum eects that you create or a drum eect sequence to play it back later from the speaker. Press the REC button to start recording. The REC LED lights up red. Generate the desired drum eects that you want to record. The recording is stored in the party speakers internal memory (up to 800 notes). Press the PLAY button to play your recording. The REC LED goes out. Demo songs play/stop You can play the pre-installed demo songs. Press the DEMO button to play demo songs, press again to switch songs. Press the STOP button to stop demo songs. DJ sound eect You can play DJ sound eects. Turn the DJ sound eects knob to have DJ sound eects. Press the DJ MODE button to change DJ sound eects style. Connect Bluetooth audio output device To connect a Bluetooth audio output device (e.g. smart phone or tablet PC), proceed as follows: Switch the speaker on. Press the MODE button once or repeatedly until the screen shows bt to switch to the Bluetooth mode. The speaker is now in pairing mode. During this time, bt ashes on the display. The party speaker attempts to automatically connect itself to the last audio output device connected via Bluetooth. If this is not possible, the speaker sends its device identication via Bluetooth and bt ashes on the screen. Switch on the Bluetooth function on your audio output device and enable search mode. On your audio output device select your speaker SYLVANIA SP770 from the list of available devices and link the devices. You may nd more information about the Bluetooth function of your playback device in its operating instructions. If you are prompted to enter a password, enter 0000. After successful Bluetooth paired, a beep sounds will come up and the bt on the screen will be solid. You can control how tracks are played and the volume on your external device and on the party speaker. The functions available when using an audio playback device on the party speaker depend on your external device and the software used. Connecting an external playback device VIA AUX IN You can use the AUX IN connection to connect an external playback device (for example a CD player or MP3 player). Switch the party speaker ON. Switch on your external device. Plug the end of a 3.5 mm cinch cord (not supplied with the device) into the AUX IN plug on the top of the speaker. Connect the other end of the cord to your external device. Switch on your external device. Press the MODE button several times until you see AUX in the display. The audio signal from your external device will now be played back. The track playback is controlled via the external device. The volume can be controlled both on your external device and the speaker. Inserting USB memory sticks Insert the USB drive into the USB slot on the top of the party speaker. It will enter to USB mode, the display will appear on the display. And it will play the songs from the USB immediately. Due to the numerous dierent le systems and le formats, compatibility with the connected memory media cannot be guaranteed. Depending on the size of the data medium, it may take some time for the system to be detected. The supported le format is MP3/WMA. USB sticks up to 32 GB are supported. External hard disks are not supported. Inserting SD memory card Insert the SD memory card into the slot on the top of the party speaker. The cards contacts show towards the front of the device. Sd will appear in the display. Please note the following when connecting an SD memory card:

Due to the numerous dierent memory cards on the market, compatibility with the connected memory media cannot be guaranteed. Depending on the size of the data medium, it may take some time for the system to be detected. The MP3/WMA le format is supported. SD memory cards up to 32 GB are supported. FM function Press the MODE button once or several times to select the operating mode you require. The frequency will appear on the display. Press and hold the button to search channels automatically. It will store all stations after stop searching. Press the or button to next or previous channel. Connect guitar The guitar can be used in any operating mode. To connect the guitar, proceed as follows:

Insert the connection cord (6.3 mm cinch) for the guitar into the guitar plug GT in. Connect the guitar with the connection cord. Use the MIC/GT volume knob to select the desired guitar volume Connecting a microphone Insert the cord of the microphone supplied into the MIC plug on the top of the speaker. Use the MIC/GT volume knob to select the desired microphone volume. Use the MIC ECHO knob to set any desired echo sound eect for the microphone. DOS and Donts Read the following recommendations before using the speaker. Following these you will be able to enjoy the product for many years. Dont use abrasive cleaning solvents to clean the speaker. Do not expose the speaker to extremely high or low temperature as this will short-

en the life of electronic devices, distort certain plastic parts. Dont attempt to disassemble the speaker as it may get damaged if you are not professional. Do not expose the speaker to heat or re. Avoid storage in direct sunlight. Do not subject the speaker to mechanical shock. Do not add any uids or solids to your speaker. Do not use the speaker if it has been damaged in any way, Specications Bluetooth specication Operating distance Speaker output Size Weight Bluetooth 4.2 10 meter 50W 402*350*221mm 5.7KG Note: This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generate uses and can radiate radio frequency energy and, if, not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that the interference will not occur in particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected. Consult dealer or an experienced radio/TV technician for help changes or modications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including the interference that may cause undesired operation. For service assistance and product information, please call:

1-800-968-9853. Curtis international Ltd. 7045 BECKETT DRIVE, UNIT 15, MISSISSAUGA, ON, L5S 2A3