submitted | available | document details (if available) | source link |
---|---|---|---|
May 06 2016 | May 06 2016 | Adobe PDF Library 15.0 |
various | User manual | Users Manual | 386.81 KiB | May 06 2016 |
40 5 I Q U C K S T A R T G U D E I GET TO KNOW YOUR BRAVEN POWER BUTTON PLAY / PAUSE MUSIC /
PAIRING / ANSWER-END CALL
+ VOLUME UP / SKIP TRACK
(press and hold) FOLD-OUT KICKSTAND
- VOLUME DOWN / SKIP BACK (press and hold) LED BATTERY INICATOR RING
-Each pair of LEDs are 20%
2 PRESS FOR BATTERY CHECK WHEN CLOSED I/O PORT COVER
(remains attached, must be secured tightly to speaker for waterproofing) 3.5 MM AUDIO-IN JACK EXTERNAL USB CHARGING PORT BRAVEN CHARGING PORT BATTERY CHECK BUTTON RESET BUTTON Full manual and troubleshooting: braven.com/manuals TURN ON & BLUETOOTH PAIRING 1. Press the Power Button for 2-3 seconds to turn on your BRAVEN (405). Press the same button again for 2-3 seconds to turn your BRAVEN off. 2. Activate Bluetooth on the phone or device you are pairing with (see your devices instruction manual for information on activating its Bluetooth settings). 3. Press and hold the Play / Pause Button on your BRAVEN until you hear the BRAVEN pairing sound. LEDs and backlit buttons will flash during pairing process. 4. Go to your phone or devices Bluetooth settings and select BRAVEN 405 from the list. 5. If asked for a passcode enter 0000 Your BRAVEN will remember the last 8 devices it has paired with. NOTE: If your BRAVEN does not have an active Bluetooth connection and is left on, it will shut itself off after 30 minutes. To restart your BRAVEN you will need to press and hold the Power Button for 2-3 seconds. 3 10 Minutes before BRAVEN 405 runs out of power, an audio alert will sound. Just before complete power drain, the audio alert will sound once more and the speaker will shut down. CHARGING YOUR BRAVEN Before using your BRAVEN for the first time, charge the unit until all LEDs are off, indicating a full charge (typically 2 hours). To charge your BRAVEN, plug the included USB-to-Micro-USB cable into a wall power adapter (not included) or into a powered USB port on a computer. Plug the Micro-USB connector end of the cable into the BRAVEN charging port. 4 Full manual and troubleshooting: braven.com/manuals CHARGING EXTERNAL DEVICES 3. Plug the other end of the cable into your mobile device, and it will immediately begin charging. Your BRAVEN is designed to charge USB devices that draw from 0.3A - 1A
(most cell phones & mp3 players tablets and other 2A devices cannot be charged by your 405) using the full-
sized USB port located behind the I/O port cover. To use external charging:
1. Turn your BRAVEN on. 2. Plug the USB power cable that came with your phone, mp3 player, or other mobile device into the USB port on your BRAVEN. 5 SPEAKERPHONE WATERPROOF FEATURES Press the Play / Pause Button on your BRAVEN to answer the call over the speaker. Press the Play / Pause Button again to end the call. The BRAVEN 405 is IPX7 waterproof, and is designed to withstand rainfall, waterjets, water splashing, and dunk in the pool. 360 AUDIO Lay BRAVEN 405 down on rubber feet for 360 listening experience. IMPORTANT To ensure your BRAVEN 405 speaker is prepared for use in a wet environment, remove all cable connections and tightly close the I/O port cover which guards the charging port and AUX input on the side of the speaker. If this cover is not securely fastened to the speaker, BRAVEN 405 will not be waterproof. 6 Full manual and troubleshooting: braven.com/manuals WARNINGS, CAUTION & LEGAL INFORMATION To reduce the risk of fire or electric shock, do not expose the BRAVEN to rain or moisture while charging. The BRAVEN should not be exposed to dripping or splashing, and objects filled with liquids, such as vases, should not be placed on or near it while being charged or charging other devices. As with any electronic products, use care not to spill liquids into any part of the product. Liquids can cause a failure and/or a fire hazard. The power supply must be used indoors only. Make no modifications to the product or accessories. Unauthorized alterations may compromise safety, regulatory compliance, and system performance, and will void the warranty. Do not place any flame sources, such as lighted candles, on or near the BRAVEN. The BRAVEN contains small parts that may be a choking hazard and is not suitable for children under age 3. Do not continue charging the battery if it does not reach full charge within the specified charging time. Overcharging may cause the battery to become hot, rupture, or ignite. If you see any heat deformation or leakage, properly dispose of the battery. Do not attempt to charge the battery in temperatures outside the range of 32-104F (0-40C). If the battery begins to leak, do not allow the liquid to come in contact with your skin or eyes. If contact has been made, wash the affected area with plenty of water and seek medical attention immediately. Do not expose the product or battery to excessive heat, including direct sunlight or fire and storage or use inside cars in hot weather, where it can be exposed to temperatures in excess of 115F (60C). Doing so may cause the battery and power supply to generate heat, rupture, or ignite. Using the product in this manner also may result in a loss of performance and a shortened life expectancy. Extended exposure to direct sunlight may damage the external appearance and material qualities. Do not step on, throw, or drop batteries or the power supply or device, or expose them to a strong shock. Do not pierce, crush, dent, or deform the batteries or power supply in any way. If either becomes deformed, properly dispose of it. Do not short-circuit batteries. Do not attempt to service the BRAVEN yourself. Opening or removing covers may expose you to dangerous voltages or other hazards and will void the manufacturers warranty. To prevent risk of fire or electric shock, avoid overloading wall outlets, 7 WARNINGS, CAUTION & LEGAL INFORMATION (CONT) extension cords, or integral convenience receptacles. Your Bluetooth device (mobile phone, music player, tablet, laptop, etc.) must support the A2DP Bluetooth profile in order to work wirelessly with your new BRAVEN speaker. The A2DP profile is supported by most recent mobile products with built-in Bluetooth capability. Please refer to your devices user manual for details and instruction regarding the Bluetooth profiles it supports. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. CAUTION: Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. FCC RADIATION EXPOSURE STATEMENT: This device complies with FCC radiation exposure limits set forth for an uncontrolled environment. 8 Full manual and troubleshooting: braven.com/manuals This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. Lithium Battery installed is not intended to be replaced by the USER. CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. Where the MAINS plug is used as the disconnect device, the disconnect device shall remain readily operable. The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS-102 RF exposure, users can obtain Canadian information on RF exposure and compliance. Correct Disposal of this product. This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. This product complies with California Energy Commission efficiency standards for consumer battery chargers. 9 ONLINE: www.braven.com MANUAL: www.braven.com/manuals SUPPORT: www.braven.com/support EMAIL: support@braven.com PHONE: 1-877-9 BRAVEN (1-877-927-2836) TUTORIALS: www.braven.com/tutorials v3
This product uses the FCC Data API but is not endorsed or certified by the FCC