submitted | available | document details (if available) | source link |
---|---|---|---|
August 03 2018 | August 03 2018 |
various | User Manual | Users Manual | 254.49 KiB | August 03 2018 |
Brunt Wi-Fi Blind Engine Manual 1. General Description The Blind Engine is a device that transforms your standard home blinds into smart motorized blind. 2. Composition 3. General Specifications Model : Brunt WiFi Blind Engine (BEAKR1601) Rated Voltage :DC 12V Rated Current : 2A Power Consumption : 36W (Max) Communication Frequency : 2.4GHz Wireless Communication Method : Wi-Fi Wireless Specifications : IEEE 802.11b/g/n Security : WEP/WPA-PSK/WPA2-PSK Motor Speed :41RPM Motor Torque : 1.96N.m 4. Functional Description Raise : Raise the blind to the highest set position. Press one more time to stop movement. Lower : Lower the blind to the lowest set position. Press one more time to stop movement. LED : Red light means connection stand-by (1time/sec), or overstatus warning
(10times/sec) Green light means that device is on working searching network. (See the Signal guide in App for details) Reset : Press and hold the button for 5 seconds. You can reconnect another Wi-Fi AP or set the calibration again. Adjustment Bar : Pull the adjustmenr bar forward to help you position the Blind Engine vertically or detach it. Adapter : Always be connected while using the product. Blind engine can be influenced by material of the blind, age or other factore, so we recommend to use within stable range. 5. Installation Guide Search by the keyword Brunt on App Store or Google Play. You can download the application for free. For more information on installing hardware or connecting apps, see the installation guide on Brunt App. 6. Warning Please read the below instructions for safety. Do not disassemble or attempt to service this product. Do not immerse product in any liquid or expose to heat or moisture. If product is operating improperly, contact Brunt support immediately. Do not use any other types of adapter other than the supplied one. Do not give a shock to the product while it is powered. Do not use modified gears other than supplied one. Do not connect to blind which is larger than the supported specification. Keep out of reach of children. If the product smells strange or smoke coming out from it, immediately unadapter and contact brunt Support. For other questions, please refer to the FAQ. ( www.brunt.co/be/support.html ) *
FAQ . ( www.brunt.co/be/support.html ) 7. Labeling Model Name: BEAKR1601 Trade Name : Brunt.Co.,Ltd. Manufacturer Name: NCTECH Co.,LTD. FCC ID : 2AODVBEAKR1601 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1) This device may not cause harmful interference, and 2) This device must accept any interference received, including NOTE: This equipment has been tested and found to comply with the limits for a Class B digital interference that may cause undesired operation. device, pursuant to part 15 of the FCC Rules. These limits are designed to pro-vide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not in-stalled and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
- This appliance and its antenna must not be co-located or operation in conjunction with any other antenna or transmitter. A minimum separation distance of 20 must be maintained between the antenna and the person for this appliance to satisfy the RF exposure requirements. CAUTION : Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the users authority to operate the equipment.
This product uses the FCC Data API but is not endorsed or certified by the FCC