M-SONIC-600BH BLUETOOTH HEADSET SYSTEMS User manual revised

 

HARLEY-DAVIDSON ROAD TECH BLUETOOTH HEADSET SYSTEMS INSTRUCTION MANUAL Congratulations on your purchase of the HD Motorcycle Bluetooth Headset System!

Thank you for purchasing our product. This manual is for ROAD TECH-600BH. Please read this instruction manual thoroughly for proper usages and application before connecting and operating the equipment. HD owns all intellectual property rights including copyrights of in-

struction manual, hardware and related software of ROAD TECH-600BH which will be protected by the Copyright Act. Without HD's written permission, they cannot be copied, re-printed or translated into other languages. Design and specifications are subject to change without notice. 1YEAR LIMITED WARRANTY

- HD products are warranted with a 1 year limited warranty. The warranty period is 1 year from the date it was purchased.

- In order to ensure the highest warranty quality, you must com-

plete and send in the attached registration/warranty card anda copy of your original invoice. HD authorized dealer reserves the right to request the above documents.

- Keep the original package in case your system needs to be re-

turned or repaired.

- The limited warranty does NOT cover physical damage such as misuse, modification, incorrect installation, unauthorized ser-

vice, and normal wear and tear. It also does not cover damage by accident or abuse caused by improper cleaning or care.

- HD shall not be liable for any damages or injury to persons or property which occurs while wearing a HD Bluetooth headset system.

} Bluetooth Bluetooth wireless technology is a short-range communication system intended to replace the cables connecting portable and/or fixed de-

vices used for communication. How to Use Bluetooth System Connect two or more Bluetooth devices on your wireless network sys-

tem via subsequent setup process and entering the PIN code provid-

ed. Once the Bluetooth devices are connected, you are free to listen to music or have a phone call via Bluetooth headsets without any cables. Static noise or signal interference can occur depending on the en-

vironment. Situations prone to cause signal interference include below but is not limited to 1) When holding the Bluetooth module while wearing the headset on the ears or while holding a cell phone, the human body can inter-

rupt signals between the devices. 2) When the external signal receptor of the Bluetooth module, head-

sets, or cell phone touches the human body. 3) When a wall or furniture blocks the signal. 4) When satellites, electromagnetic waves or wireless internet con-

nections interrupt the signal in the same range of frequencies. When the bluetooth module and headsets, cell phone or external sig-

nal receptor gets further apart than the limited distance, the pairing between the devices can be disconnected. Place the bluetooth module and connected device near each other while pairing. Static noise or signal interference can occur while underground or in industrial areas. This Bluetooth system may not be compatible with some navigation or GPS systems. The volume on the speaker of the Bluetooth headset can be low due to the wind sound while over-speeding. Please observe the speed limit. SAFEGUARD INSTRUCTIONS Safeguard instructions +... PREPARATION Contents . Headset charge Product function check ...::+1e Names and functions of each Parts ..-:ssceeesseeessesesreeeeeenteeeenee KEY operating times and status .... Headset mounting and GisMmounting -+--ssescesessessesssseeseesesnseee oo onanNn Headset Care eeeeeeeeeceeeeeeteeeeeeerereees OPERATION Headset power ON/OFF Volume UP/DOWN How to connect your headset Operating Instructions ...... _To answer a Call ....::sessseeeeeeees TG WARE A GAM cata ccteseeceus st ecoues listening to MUSIC +--+

_To talk on the phone while music is playing --+1+..1+1s+0 APPENDIX Battery charging and standard use time Product specifications -

SAFEGUARD INSTRUCTIONS Please read the Safeguard Instructions carefully before using this product. Following these safeguard instructions prevents users from any damage related with the misuse of this product. It is very impor-

tant that users follow these instructions.We state Caution and Warn-

ing to indicate any potential for damage associated with the misuse of the product. Warning Indicates a potentially hazardous Indicates a potentially hazardous. situation, which if not avoided. 11 Caution situation, which if not avoided, injury could result in property damage. Caution Indicates a potentially hazardous About signs O0OQ90O0900900 situation, which if not avoided, could result in moderate or minor a Potential Injury Hazard S Do Not

@ Follow Directions Carefully Do not use in water. Do not pull the plug with wet hands.

-This could cause electric shock. Do not use unapproved power voltage.

-This could cause fire or electric shock. Do not use damaged electric cord.

-This could cause fire and/or electric shock. Do not place electric cord near a heating product.

-The cord surface could melt and cause fire and/or electric shock. Do not disassemble, repair, or modify if you are not an authorized ser-

vice person

-This could cause electric shock and or malfunction. Do not pull the cord line when you unplug it.

-It could damage cords and cause fire and/or electric shock. Place the product where it does not block the riders view.

-This could obstruct the view and could result in death or serious injury. Keep electric cord properly positioned.

- An improperly positioned electric cord may cause fire or electric shock when metal material is in contact with a power source. 8 8 6 8 8 8 8 Q\cavtion Q@eee Do not operate with wet hands or get the product wet.

-It could cause damage and electric shock. Do not put metallic materials such as pins and needles in the hole and between the cracks of the product.

-It could cause fire, electric shock and damage. In case of fire, stop using immediately. Do not use water, a thinner or solvent to clean the product.

-It could cause damage and fire. Keep the product unplugged when not in use. It may cause fire and electric shock from overheating. Do not use if you observe or smell smoke coming from the product. This could be a fire hazard. Do not place the product in areas of very high temperature, where there is a sudden increase in temperature and/or indirect sunlight for long period of time.

-This could cause fire, electric shock and/or malfunction. Stop using the product immediately when dropped, thrown or there is damage to the outside shell.

- Continuous use could cause fire, electric shock and/or malfunction. Unplug the product when not in use for a long period of time.

-It could damage cords and cause fire and/or electric shock. Unplug the product and remove cords when moving.

-It could damage cords and cause fire and/or electric shock. Keep the product firmly secured on the helmet.

- Otherwise the unit could separate from the helmet during use. Use a dry cloth when you clean the exterior of the product. Clean the product often.

- Dust build up could cause malfunction. Do not put the product in an unstable place where the product may be exposed to shock and/or impact.

-The product could fall and get damaged. SW |

DC Adaptor Instruction Manual 1/2 Helmet MAIN MODULE 1A elenat Do not use this product in the following condtions.

- High in humidity or bad ventilation

- Dusty or oily conditions

- Low temperatures below -20 degree Fahrenheit 144 ET CHARGE This headset is powered by a lithium polymer battery. Use the device after charging the battery completely.

- Display device : RED LED

- When the unit is charging the RED LED turns on, and when charging is complete, the RED LED turns off.

- Separate charger from Headset after the RED LED turns off.

- When battery is low,a beeping sound will ring. Please use the DC adapter provided by HD. Use of an unapproved adaptor may cause damage. If you find any strange occurrences or malfunction in the product or any foreign substance gets into the product, please contact M-Sonics customer service at 1-866-506-

2443. PRODUCT FUNCTION CHECK Phone Feature Music Feature

- Auto call answering - To play music

- Making calls - To stop music

- Calling the last number dialed - Volume control (up/down)

- Transfer Dialing

- Voice Dialing

- End call function

- Volume control (up/down) caer RESET KEY mmTauiier EARPHONE S eRACKETONT Jace te KEY FUNCTION

(+)KEY Volume UP

(-)KEY Power ON/OFF, Volume DOWN, Pairing TALK KEY Last number redialing, Transfer dialing

[(T) KEY] Voice dialing, End call RESET KEY Power OFF in various active states KEY OPERATING TIMES AND STATUS MODE key TIME LEDSTATUS BEEP Power ON [OKEY] sec. Flashing for 2 sec, then stand-by mode times Power OFF [eKEY] 3 sec, Flashing for 2 sec,, in every 100ms. 3times Stand BY - - Every 100ms 1Xflashing/sec -

Pairing [OKEY] 7sec. Flashingin every 1oorsuntil completed(Max amin) S times Connected - - - times Dialing - - - Sound Last Number Dialing [KEY] Quick - Once Voicedialing [KEY] 2sec :

Transfer Call [KEY] 2 sec - Twice End Call (KEY] Quick - -

MusicPLAVSTOP [GO KEY] sec Flashing twicefor2sec. -

Low Battery Status - - Interval beeping every 20 sec Twice Charging - - RED LED ON beforefully charged -

HEADSET MOUNTING AND DISMOUNTING This process is applicable to 1/2 helmet, 3/4 helmet and full face helmet. STEP 1. Push down the Bluetooth main module into the bracket. HELMET BRACKET

-Keep the power off when not in use.

- Keep ina cool place avoiding extremely high temperatures, and/or direct sunlight for extended periods of time such as inside hot vehicles.

-Keep accompanying parts in a dry place. HEADSET POWER ON/OFF To POWER ON, press the [(-)KEY] for 3 sec. Press again for 3 sec. to POWER OFF.

- POWER ON : Press [(-) KEY] for 3 sec.

+ POWER OFF : Press [(-)KEY] for 3 sec. VOLUME UP/DOWN Press (+)KEY or (-)KEY to control volume when the device is turned on. Volume level is adjustable while the device is turned on. HOW TO CONNECT YOUR HEADSET WARNING Always stop motorcycle before using the phone. Using A phone while riding can cause distractions which could lead to loss of control, resulting in death or serious injury. 1. Pairing Headset with cellular phone Please pair the Headset to your Bluetooth device(ex. Cellular phone) before using. This process connects the two devices to enable the Blue-

tooth function. Select ROAD TECH-600BH in searched device list. 1) Press and hold [(-)KEY] button on the headset for approximately 7-10 sec-

onds until the red indicator light flashes rapidly. (Initially, the red indicator lightwill blink; continue to hold the button until it flashes rapidly.) 2) Release the [(-)KEY] button when the red indicator light flashes rapidly. 3) From your Bluetooth cell phone, perform a Bluetooth device discovery or search mode. (Refer to your cell phone manual for detail instructions on Bluetooth devices searching) 4) Select ROAD TECH-600BH. 8) Select OK to pair your communication system with your phone. 6) Enter pass code 0000 if needed. In order to disconnect the cellular phone, disable the Bluetooth function on your phone. To reconnect the Bluetooth headset with your phone, enable the Bluetooth function on the phone and turn on the headset. 10 2. Pairing Headset with Audio Device/MP3 Player 1) Press and hold [(-)KEY] button on the headset for approximately 7-10 sec. until the red indicator light flashes rapidly. (Initially, the red indicator light will blink slowly; continue to hold the button until it flashes rapidly.) 2) Release the [(-)KEY] button when red indicator light flashes rapidly. 3) From your Bluetooth audio device, perform a Bluetooth device discovery or search mode. (Refer to your Bluetooth audio device manual for detailed instructions on Bluetooth devices searching) 4) Select add new devices or search for new devices. 8) Select ROAD TECH-600BH. 6) Select OK to pair your communication system with Bluetooth device. 7) Enter pass code 0000 to pair. OPERATING INSTRUCTIONS WARNING Always stop motorcycle before using the phone. Using a phone while riding can cause distractions which could lead to loss of control, resulting in death or serious injury. 1. To answer a call 1) When the pairing of the Headset to your cell phone is completed, it is ready to answer and make calls. 2) The function of Auto Answer Call is included in this Headset and does not re-

quire additional key operation. Incoming calls are answered automatically. 3) Press [(T)KEY] briefly to disconnect. 2. To make a call 1) Last Number Dialing : Briefly press [(T)KEY] to call the last number dialed. 2) Voice Dialing : If youpress the [(T)KEY] for 2 sec., voice prompt is announced. At this time, please follow the voice prompt to make a call. Please refer to the instruction manual of your cellular phone for voice dialing. The bluetooth voice dialing function is only compatible for the cellular phones that have a voice dialing option and registered for the stereo headset service. If a cellular phone is disconnected from the headset due to the distance, the devices will automatically pair with each other once they are within 30 feet of each other. Avoid using the [TALK(T) KEY] when the Bluetooth adaptor is paired with the headset. 3. Listening to music WARNING Set volume; make music selections and other control ad-

justments before riding. Making these adjustments or se-

A lections while riding can cause distractions which could lead to loss of control, resulting in death or serious injury. In some region, the use of helmet mounted headset is prohibited. Check with local authorities and obey all application laws and regulations. 1) Listening to music stored on a cellular phone _Pair Headset with Cellular phone (audio built-in). _Please refer to the cellular phone manual to find out how to select the music to play. _To stop the music press (-)KEY and (+)KEY at the same time for | sec. _To play the music again press (-)KEY and (+)KEY at the same time for 1 sec. On some cell phones, only MP3 files can be played. Check the format to see ifthe music files are stored as MP3's. 2) To listen to music files stored in an audio device _Pair Headset with an Audio device. _Please refer to the audio device manual to play the music. _To stop the music press (-)KEY and (+)KEY at same time for 1 sec. _To listen the music press (-)KEY and (+)KEY at same time for 1 sec. _Stopping / Playing music by pressing (-)KEY and (+)KEY for ] sec. is only possible on audio devices and phones that have this feature. 4.To talk on the phone while music is playing WARNING Always stop motorcycle before using the phone. Using A phone while riding can cause distractions which could lead to loss of control, resulting in death or serious injury. 1) To talk on the phone while playing music files stored in your cell phone _When there is an in-coming call while the music is playing, the music will mute and the headset will answer the call. _When the user hangs up the phone call by briefly pressing [(T)KEY] on the headset, the stopped audio device will return to playing mode. _Kiter the call is disconnected, the headset will resume playing the music. 12 2) To use the phone while playing the music files stored in audio device _First, activate Bluetooth mode on the cellular phone. _Set Bluetooth to ON mode on the cellular phone so that it connects the Head set with the cellular phone. _Pair Headset to cellular phone. _Pair Headset with audio device to listen to music. _When you receive a call on your cellular phone while listening to music, the music will be disconnected and you can answer your call. _Kiter the call is disconnected, the headset will resume playing music. _In order to connect the headset with an audio device and cellular phone at the same time, your cellular phone must be a mono version.

(To check if it is mono or stereo, refer to the manual of your cell phone.) _If you press the [TALK(T) KEY] once briefly, the music is disconnected and cellular phone returns to call the last number dialed. Depending on the cellular phone, you may have to press the [(T)KEY] twice. _If the phone is powered off or disconnected from the headset, music will discontinue playing from the headset. BATTERY CHARGING and STANDARD USE TIME Charging time Talk Stand-BY time Speak /Play About 3 hours 120 hours 13 hours Device name ROAD TECH-600BH Bluetooth version Version 2.0 Frequency range 2402~2.480MHz Transmission output 0.01mW Wireless use distance At max. 30 feet Dimension 2"(W) x3.5(H) x0.8"(D) Weight 13 ounces Operating temperature -20C ~ +55C Adapter input AC 100 ~ 240, 50/60Hz Adapter output DC 5Y, 1A 13 14 Getting the Most out of your Bluetooth Device 1. The best condition to listen to music while driving :

1) Open face helmet : Below 50 mph 2) Full face helmet : Below 60 mph 2. The best condition to have a phone call 1) Open face helmet :Below 60mph 2) Full face helmet : Below 70 mph 3. Static noise 1) When the headset is being paired with other bluetooth devices, 2) When the distance between the headset and bluetooth device is further than 30 feet. 3) When passing heavy radio signal interference areas. 4) When the pairing is disconnected. 3) When several bluetooth devices are being used at the same time. 4. Fox proper use of device 1) Place the cell phone or audio device near the headset when riding, the ideal place to keep the headset includes pants, shirt, and jacket pockets. pSa He] UW NFORMATION FCC Compliance Information This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions;

1) This device may not cause harmful interference, and 2) This device must accept any interference received. This inchides interference that may cause undesired operation. FCC WARNING This equipment may generate or use radio frequency energy. Changes or modi-

fications to this equipment may cause harmful interference unless the modifica-

tions are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made. Hereby, [Camos Co., LTd.], declares that this [ ROAD TECH-600BH ]

Is in corapliance with the essential requirements and other relevant Provisions of Directive 1999/8/EC. 15 M-Sonics.com 1-866-506-2443(toll free) a VERSION 1.0