XJH1750 DATA PROJECTOR UserMan Users Manual

 

E DATA PROJECTOR XJ-H1600/XJ-H1650*

XJ-H1700/XJ-H1750*

XJ-ST145*/XJ-ST155*

* USB Port Models Users Guide

Be sure to read the precautions in the separate Setup Guide. For details about setting up the projector, see the Setup Guide.

Be sure to keep all user documentation handy for future reference.

DLP is a registered trademark of Texas Instruments of the United States.

Microsoft, Windows, and Windows Vista are registered trademarks or trademarks of Microsoft Corporation in the United States and other countries.

HDMI, the HDMI Logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing, LLC.

XGA is a registered trademark of IBM Corporation of the United States.

PJLink is a trademark applied for registration or is already registered in Japan, the United States of America and other countries and areas.

Crestron is a registered trademark of Crestron Electronics, Inc. of the United States.

AMX is a registered trademark of AMX LLC of the United States.

Other company and product names may be registered product names or trademarks of their respective owners.

Portions of this product are based in part on the work of the Independent JPEG Group.

The contents of this Users Guide are subject to change without notice.

Copying of this manual, either in part or its entirety is forbidden. You are allowed to use this manual for your own personal use. Any other use is forbidden without the permission of CASIO COMPUTER CO., LTD.

CASIO COMPUTER CO., LTD. shall not be held liable for any lost profits or claims from third parties arising out of the use of this product or this manual.

CASIO COMPUTER CO., LTD. shall not be held liable for any loss or lost profits due to loss of data due to malfunction or maintenance of this product, or any other reason.

The sample screens shown in this manual are for illustrative purposes only, and may not be exactly the same as the screens actually produced by the product.

Unless specifically stated otherwise, all illustrations in this manual show the XJ-H1650. 2 Contents About this manual... ..............................................................................5 Projector Overview ......................................................... 6 Projector Features and Main Functions .................................................6 Remote Controller and Projector Keys...................................................8 Back Terminals.......................................................................................9 Operation During Projection ........................................ 10 Selecting the Input Source...................................................................10 To select a different input source .............................................................................. 10 3D Input Mode ........................................................................................................... 11 Horizontal Flipping in the 3D Input Mode .................................................................. 12 Image Operations During Projection ....................................................13 Adjusting Image Brightness....................................................................................... 13 Selecting the Color Mode .......................................................................................... 14 Zooming an Image ..................................................................................................... 14 Momentarily Cutting Off the Input Source Image ...................................................... 15 Freezing an Image...................................................................................................... 15 Displaying a Pointer in the Projected Image.............................................................. 16 Changing the aspect ratio of the projected image .................................................... 17 Adjusting the Volume Level ..................................................................18 To adjust the volume level ......................................................................................... 18 To mute the audio...................................................................................................... 18 Eco Mode (Power Saving, Low Noise) .................................................19 To select the Eco Mode............................................................................................. 19 Using the [FUNC] Key ..........................................................................20 3 Configuring Advanced Projector Settings.................. 21 Basic Setup Menu Operations .............................................................21 Displaying the Setup Menu........................................................................................ 21 Configuring Setup Menu Settings.............................................................................. 21 Basic Setup Menu Example....................................................................................... 22 Direct Power On......................................................................................................... 23 Password Protecting the Projector ......................................................24 Inputting a Password ................................................................................................. 24 Using the Password Feature...................................................................................... 24 Entering the Password when Turning On the Projector ............................................ 26 Restoring Projector Settings to Their Initial Factory Defaults ..............27 Setup Menu Contents ..........................................................................29 Image Adjustment 1 Main Menu................................................................................ 29 Image Adjustment 2 Main Menu................................................................................ 31 Volume Adjustment Main Menu................................................................................. 31 Screen Settings Main Menu....................................................................................... 32 Input Settings Main Menu.......................................................................................... 34 Option Settings 1 Main Menu .................................................................................... 35 Option Settings 2 Main Menu .................................................................................... 36 Wired LAN Settings Main Menu (USB Port Models Only) ......................................... 38 USB Settings Main Menu (USB Port Models Only) ................................................... 38 Operational Info Main Menu ...................................................................................... 39 Restore All Defaults Main Menu................................................................................. 39 Cleaning the Projector.................................................. 40 Cleaning the Projector Exterior ............................................................40 Cleaning the Lens.................................................................................40 Cleaning the Vents ...............................................................................40 Error Indicators and Warning Messages .................... 41 4 Appendix ........................................................................ 44 Connecting to a Video Device..............................................................44 Connection to a composite video output or S-video output ..................................... 44 Connection to a component video output................................................................. 45 Connecting the HDMI Output of a Video Device or Computer to the Projector....................................................................46 Remote Controller Signal Range..........................................................47 Hanging the Projector from a Ceiling ...................................................48 Projection Distance and Screen Size ...................................................49 Aspect Ratio Setting and Projection Image .........................................50 Supported Signals................................................................................52 Using Wired LAN to Control the Projector

(XJ-H1650, XJ-H1750, XJ-ST145, XJ-ST155)......................................55 Supported External Devices ...................................................................................... 55 Controlling the Projector from a Computer ............................................................... 55 Projector RS-232C Control ..................................................................60 Connecting the Projector to a Computer................................................................... 60 Specifications.......................................................................................63 About this manual... All of the operations in this manual are explained using the remote controller that comes with the projector. D 5 Projector Overview This section describes the features of the projector, and explains the functions of the projector and remote controller keys. Projector Features and Main Functions XJ-H1600/XJ-H1650/XJ-H1700/XJ-H1750/XJ-ST145/XJ-ST155

Mercury-free Hybrid Light Source:

A CASIO-original laser and LED hybrid light source delivers high luminance from 2500 to 4000 lumens. This projector does not use a mercury lamp, making it environmentally friendly.

A wide selection of input sources:

Analog RGB, composite video, S-video, component video (YCbCr, YPbPr), and HDMI input sources are supported.

Intelligent Brightness Control function (Eco Mode):

The projector senses surrounding light levels and adjusts projection brightness automatically as required for efficient low-power operation. (Requires Eco Mode setting to be set to On (Auto).)

3D image projection support:

Projection of a 3D image signal (60Hz/120Hz field sequential protocol) via one of three input sources (analog RGB, composite video, S-video) is supported.

* Separately available 3D glasses (YA-G30) are required in order to view a projected 3D image in 3D. Also, separately available special software (CASIO 3D Converter) is required to project a 3D image with the projector when a computer (analog RGB) is the input source.

Pointer:

The remote controller can be used to select one of a variety of different pointers for use during projection.

Direct Power On:

The projector can be configured to turn on automatically and start projecting as soon as it is plugged into a power outlet. D 6 XJ-H1650/XJ-H1750/XJ-ST145/XJ-ST155

Projection of Data from USB Memory or a Memory Card without a Computer:

USB memory or a memory card (using a commercially available USB card reader) can be connected directly to the projectors USB-A port. The projector comes with special software for converting PowerPoint presentation data to a format that can be stored to USB memory or a memory card and projected without using a computer. Images and movies also can be projected directly from USB memory or a memory card.

Interactive Pointing Function:

You can use a separately available interactive pointer (YA-P10) to draw lines and figures directly on an image being projected by the projector from a connected computer. You can also use the pointer to perform mouse operations.

Multi Projection Camera (YC-400, YC-430) Connection:

A CASIO Multi Projection Camera can be connected directly to the projectors USB-A port for fine resolution projection of documents and other images. Document camera capabilities allow projection of data without going through a computer.

Graphic Scientific Function Calculator Connection:

Certain CASIO graphic scientific calculator models can be connected directly to the projectors USB-A port for projection of the calculator screen contents.

Projection of Computer Screen Contents via Wireless LAN:

The projector comes with a wireless LAN adapter. After a wireless LAN connection is established, the contents of the computer screen can be sent to the projector for projection.

Support for Wireless projection from MobiShow:

You can install AWINDs MobiShow (client software for wireless connection to a projector) on a smartphone or mobile terminal, and then use the projector to project photographs and presentation files stored in the smartphone or terminal memory.

* Note that the type of terminal and the MobiShow version can limit certain functions or can even make projection impossible.

Projector operation via wired or wireless LAN:

Remote control of the projector is supported via a wired connection to the LAN port on the back or the projector or via wireless LAN. D 7 Remote Controller and Projector Keys Operations in this manual are presented based on the remote controller that comes with the projector. Major operation keys are also provided on the projector unit, so the most of the same procedures can also be performed directly on the projector. Remote Controller Keys

[INPUT] key

[MENU] key

[P] (Power) key

[ESC] key

[FUNC] key

[AUTO] key

[BLANK] key

[FREEZE] key

[COLOR MODE] key

[VOLUME] key

[BRIGHT] key ([O] key)

[ECO] key ([f] key)

[ASPECT] key ([Z] key) Remote control signal emitter CLASS 1 LED PRODUCT Cursor keys (///)

[ENTER] key ([STYLE] key)

[D-ZOOM +] [D-ZOOM ] keys

[KEYSTONE +] [KEYSTONE ] keys

[POINTER] key The remote controller does not come with batteries loaded. You need to load the two supplied batteries before use. Important!

To avoid running down the batteries, store the remote control unit so its keys are not pressed inadvertently. Projector Keys and Indicators LIGHT indicator POWER/STANDBY indicator

[MENU] key TEMP indicator

[ENTER] key

[P] (Power) key

[ESC] key

[INPUT] key Cursor keys (q/w/U/I)

[AUTO] key 8 Back Terminals 1 2 3 4 5 6 87 9 bk bl bm bn bo bp bq br 1 USB-A port (XJ-H1650/XJ-H1750/XJ-ST145/XJ-ST155 only) 2 LAN port (XJ-H1650/XJ-H1750/XJ-ST145/XJ-ST155 only) 3 HDMI port 4 MONITOR OUT terminal 5 COMPUTER IN 1 terminal 6 COMPUTER IN 2 terminal 7 Remote control signal receiver 8 Power connector 9 SERIAL port*1 bk AUDIO OUT terminal bl Anti-theft lock hole bm AUDIO IN 1 terminal bn AUDIO IN 2 terminal bo AUDIO IN L/R terminals bp VIDEO terminal bq S-VIDEO terminal br USB-B port*2 (XJ-H1650/XJ-H1750/XJ-ST145/XJ-ST155 only)

*1 This terminal is for controlling the projector from an external device. It normally is not used. For information about using control commands and other details, See Projector RS-232C Control

(page 60).

*2 This port is for USB connection between the projector and a computer when using the optionally available interactive pointer (YA-P10). D 9 Operation During Projection Selecting the Input Source Turning on the projector initially causes the same input source that was selected the last time it was turned off to be selected. To select a different input source 1. Press the [INPUT] key.

This displays the input source selection screen. 2. Select either the Normal Input Mode or 3D Input Mode depending on the type of image you want to project.

For details about the 3D Input Mode, see the explanation in the following section. 3. Use the [] and [] keys to select the name of the input source you want to select and then press the [ENTER] key.

The name of the input source you select appears in the upper right corner of the projection screen for a few seconds.

The message No signal input. will appear if no input signal can be selected. Note The table below shows how the input source selection affects the projectors MONITOR OUT terminal and speaker (or AUDIO OUT terminal)*1 output signals. When this input source is selected:

The video input signal from this terminal is output to the MONITOR OUT terminal:

The audio input signal from this terminal is output to the speaker

(or AUDIO OUT terminal):

Computer 1 Computer 2 S-video Video HDMI USB COMPUTER IN 1*2 COMPUTER IN 2*2

*2 *3

*2 *3

*2 *3

*2 *3 AUDIO IN 1 AUDIO IN 2 AUDIO IN L/R AUDIO IN L/R HDMI USB

*1 Audio is output from either the speaker or AUDIO OUT terminal in accordance with the setup menu Option Settings 2 Audio Output setting.

*2 Output is proper only when the input signal is an RGB signal. Output is not guaranteed when the input signal is a component signal.

*3 The video input signal is output from either Computer 1 or Computer 2, in accordance with the last selected input source (COMPUTER IN 1 terminal or COMPUTER IN 2 terminal). For example, even if the input source is switched from Computer 1 to S-video, the MONITOR OUT terminal continues output the video input signal from COMPUTER IN 1. 10 3D Input Mode Your projector supports projection of 3D images. To project a 3D image, first enter the projectors 3D input mode, and then select the input source. Important!

Separately available 3D glasses (YA-G30) are required in order to view a projected 3D image in 3D.

Separately available special software (CASIO 3D Converter) is required to project a 3D image with the projector when a computer (analog RGB) is the input source. The input sources described below can be selected for projection in the 3D Input Mode. Input Source Projection Conditions Computer (Analog RGB)

Any of the following types of 3D image data played back using separately available special software (CASIO 3D Converter). 2D image file converted to a 3D image file using CASIO 3D Converter Side-by-side 3D format files

Signal with 60Hz/120Hz vertical scan frequency Composite Video, S-video Field sequential 3D format files recorded with field sequential DVD software, etc.

Signal with 60Hz vertical scan frequency Note See 3D Signals (3D Input Mode) (page 54) for a list of 3D image signals supported by this projector. Entering the 3D Input Mode 1. Press the [INPUT] key to display the input source selection screen. 2. Select Computer 1 (RGB), Computer 2 (RGB), S-video, or Video as the input source. 3. Use the [] and [] keys to move the highlighting to To 3D input mode and then press the [ENTER] key.

This enters the 3D input mode and closes the input source selection screen. Important!

You cannot select HDMI or USB as the input source in the 3D input mode. To use either of these input sources, change the input source setting back to normal input mode.

When Computer 1 (or Computer 2) is selected as the input source in the 3D input mode, a component video signal input through the projectors COMPUTER IN 1 (or COMPUTER IN 2) terminal is treated as an RGB signal resulting in abnormal image projection.

Except when using the projector for 3D image projection, you should normally leave it in the normal input mode. 11 Returning to the Normal Input Mode from the 3D Input Mode 1. Press the [INPUT] key to display the input source selection screen. 2. Use the [] and [] keys to move the highlighting to To normal input mode and then press the [ENTER] key.

This enters the normal input mode and closes the input source selection screen. Horizontal Flipping in the 3D Input Mode In side-by-side 3D, a full frame consists of two halves on the left and right for each eye. In rare cases, the left and right images may be reversed, which causes a loss of 3D depth. If this happens, try using the following procedure to swap the left and right images with each other. To swap the left and right images In the 3D input mode, press the [ENTER] key. 12 Image Operations During Projection You can perform the following operations while projecting an image.

Image brightness adjustment

Color mode selection

Image zooming

Momentary cut off of the input source image and projection of a black or blue screen, or a logo

Image freeze

Pointer display in the projected image

Aspect ratio switching Adjusting Image Brightness Note

(for USB port model users) Use the setup menu (page 21) to adjust image brightness when the input source is an external device connected to the USB-A port. To adjust image brightness 1. Press the [BRIGHT] key.

This displays the brightness adjustment window. 2. Use the [] and [] keys to adjust image brightness. 3. To hide the window, press the [ESC] key. 13 Selecting the Color Mode You can select from among various different color mode settings in accordance with image contents and projection conditions. Important!

The color mode cannot be selected in the following cases.

When Off is selected for the Eco Mode setting (page 19)

When the projector is in the 3D input mode. See 3D Input Mode (page 11).

The color mode cannot be selected while On is selected for the setup menu Option Settings 2 Interactive Pointer setting. Though the color mode change operation may be possible on some projector models, doing so may cause problems with the optional interactive pointer (YA-P10) in some color modes. To change the color mode 1. Press the [COLOR MODE] key.

This displays the color mode selection window. The currently selected color mode is the one whose button is selected (filled in). 2. Use the [] and [] keys to move the highlighting to the color mode you want to select, and then press the [ENTER] key.

This will select the button next to the highlighted color mode name.

For details on what each color mode does, see Color Mode under Image Adjustment 1 Main Menu on page 30. 3. To hide the window, press the [ESC] key. Zooming an Image 1. Press the [D-ZOOM +] key.

This will enlarge the center of the projected image one step. 2. To zoom in on the center of the projected image more, press the [D-ZOOM +]

key again. To zoom out, press the [D-ZOOM ] key.

Each press of [D-ZOOM +] zooms in (increases the zoom factor), while [D-ZOOM ] zooms out. Holding down either key continuously scrolls the zoom factor. 3. While an image is zoomed, use the [], [], [], and [] keys to scroll the view to other parts of the image. 4. To exit the zoom operation, press the [ESC] key. 14 Momentarily Cutting Off the Input Source Image 1. Press the [BLANK] key.

This temporarily cuts off the image from the input source and projects a black screen in its place. 2. To resume projection of the image from the input source, press the [BLANK] key

(or [ESC] key). Note You can specify projection of a black screen or blue screen, or a logo. For details, see Blank Screen under Screen Settings Main Menu on page 33. Freezing an Image Pressing the [FREEZE] key freezes the projected image. To freeze the projected image 1. While an image is being projected from an input source, press the [FREEZE] key.

This will capture the image that is on the screen at the moment you press [FREEZE] and stores it in projector memory. That image remains projected on the screen. 2. To restore projection of the image from an input source, press the [ESC] key. 15 Displaying a Pointer in the Projected Image You can select from among different pointer styles, including various arrow styles, for display in the projected image. Pointers can be used during a presentation to indicate or highlight a specific part of the image. Note Depending on the pointer style you are using, the pointer may not display properly when you are using keystone correction. If this happens, use the [KEYSTONE +] and [KEYSTONE ] keys to change the keystone correction value to zero. To display a pointer in the image 1. Press the [POINTER] key.

This will cause a pointer to appear in the image.

You also can use the setup menu to specify the pointer type that appears first when you press the [POINTER] key. For details, see Pointer under Option Settings 2 Main Menu on page 36. 2. Use the cursor keys to move the pointer to the location you want.

Holding down a cursor key moves the cursor at high speed. 3. To modify the pointer as described below, press the [STYLE] key. For this pointer type:

Pressing [STYLE] will change it like this:

Toggle between flashing and not flashing To select the pointer type 1. Press the [POINTER] key to display the pointer. 2. Keep pressing the [POINTER] key until the pointer you want is displayed.

Each press of the [POINTER] key cycles through the available pointer types. To clear the pointer from the image Press the [ESC] key. 16 Changing the aspect ratio of the projected image Press the [ASPECT] key to cycle through the aspect ratio settings for the projected image. Available settings are as shown below. For details about the meaning of each setting, see the Aspect Ratio setting under Screen Settings Main Menu on page 32. Input Source Pressing [ASPECT] will toggle between these settings:

Video, S-video, Component, HDMI (DTV) Normal 16:9 RGB, HDMI (PC) Normal Full Note

When the input source is a component or an HDMI (DTV) signal with an aspect ratio of 16:9, the aspect ratio is fixed at 16:9. In this case, pressing the [ASPECT] key will not change the aspect ratio setting.

For details about how the aspect ratio setting affects the projected image, see Aspect Ratio Setting and Projection Image (page 50).

You also can change the aspect ratio setting using the setup menu. For details, see Aspect Ratio under Screen Settings Main Menu on page 32. Important!

Note that enlarging or reducing the size of an image using the [ASPECT] key for commercial purposes or public presentation may infringe on the legally protected copyright of the copyright holder of the original material. 17 Adjusting the Volume Level You can use the remote controller keys to adjust the volume level of the audio that is output from the projectors speaker. To adjust the volume level 1. Press the [VOLUME] key.

This causes the [Volume] screen to appear on the projected image. 2. Press the [] key to increase the volume, or the [] key to lower the volume. 3. After the setting is the way you want, press the [ESC] key.

This causes the [Volume] screen to disappear. Note You also can use the setup menu to adjust the volume level. For details, see Volume Adjustment Main Menu on page 31. To mute the audio 1. Press the [VOLUME] key. 2. Press the [ENTER] key.

This stops output from the speaker. 3. To restore the audio, press the [VOLUME] key again. 18 Eco Mode (Power Saving, Low Noise) The following three Eco Mode settings are available to specify whether priority should be given to low-power, low-noise operation or to projection brightness. On (Auto)

: A brightness sensor on the top of the projector senses surrounding light, and automatically adjusts projection brightness and color accordingly. Brightness is reduced for darker surroundings, which saves power and reduces operation noise. On (Manual): Enables manual adjustment to balance the needs of low-power, quiet operation and projection brightness. Off

: Give top priority to projection brightness. Important!

While On (Auto) is selected as the Eco Mode setting, make sure that the brightness sensor on the top of the projector is not blocked by anything.

The local environment and setup conditions affect the brightness sensor, so operation when On (Auto) is selected for the Eco Mode depends on these factors. To select the Eco Mode 1. Press the [ECO] key.

This causes Eco Mode window to appear on the projection screen. 2. Use the [] and [] keys to select the setting you want.

If you select On (Manual) here, go to step 3. If you select another setting, jump to step 4. 3. Perform the following steps to adjust the Eco Level (the balance between low-power, quiet operation and projection brightness). 1 Press the [] key to move the highlighting to the Eco Level. 2 Use the [] and [] keys to adjust the Eco Level to the setting you want. Fewer priority to low-power, quiet operation. marks gives higher priority to projection brightness. A greater number gives high 4. To hide the window, press the [ESC] key. 19 Important!

The Eco Mode setting automatically changes to Off whenever the projector is in the 3D input mode (3D Input Mode, page 11) or On is selected for the Option Settings 2 Interactive Pointer setting.

The On (Auto) setting cannot be selected for the Eco Mode while On is selected for Screen Settings Ceiling Mount on the setup menu. If the Ceiling Mount setting is changed to On while On (Auto) is selected for the Eco Mode setting, the Eco Mode setting will automatically change to On (Manual).

The On (Auto) setting cannot be selected for the Eco Mode while Rear is selected for Screen Settings Projection Mode on the setup menu. If the Projection Mode setting is changed to Rear while On (Auto) is selected for the Eco Mode setting, the Eco Mode setting will automatically change to On (Manual). Note

While Off is selected for the Eco Mode setting, you also can specify whether brightness or color should be given emphasis. For details, see Eco Off Mode under Image Adjustment 1 Main Menu (page 30).

(for USB port model users) Use the setup menu (page 21) to select the Eco Mode when the input source is an external device connected to the USB-A port. Using the [FUNC] Key Pressing the [FUNC] key displays the menu shown below. You can use this menu to perform the operations described below.

Adjust image brightness Highlight Brightness and then press the [ENTER] key.

This performs the same operation as pressing the [BRIGHT] key (O key) described on page 13.

Turn the Eco Mode on or off Highlight Eco Mode and then press the [ENTER] key.

This performs the same operation as pressing the [ECO] key (f key) described on page 19.

Select the aspect ratio of the projected image Highlight Aspect Ratio and then press the [ENTER] key.

This performs the same operation as pressing the [ASPECT] key (Z key) described on page 17. Note

(for USB port model users) When the input source is an external device connected to the USB-A port, use the [FUNC], [O],

[f], and [Z] keys to control the connected device. For details, see the USB Function Guide and Wireless Function Guide on the bundled CD-ROM. 20 Configuring Advanced Projector Settings Your projector has a setup menu that you can use to configure advanced settings. Basic Setup Menu Operations Displaying the Setup Menu Pressing the [MENU] key displays the menu shown below in the center of the projection screen. Main menu Pressing the [MENU] key displays the main menu. The currently selected menu item is the one that is highlighted. Sub-menu The sub-menu shows each individual setting under each main menu item, and its current setting. Guidance text Guidance text provides a brief description of the main key operations available for the operation you are currently performing. To exit the setup menu Press the [MENU] key. Configuring Setup Menu Settings 1. Press the [MENU] key to display the setup menu. 2. Use the [] and [] keys to select the main menu item you want by highlighting it. 3. Press the [ENTER] key. 4. Use the [] and [] keys to select the sub-menu item you want by highlighting it. 5. Perform the required operation on the selected sub-menu item screen.

The guidance text explains the operations you need to perform to configure each setting. 6. To return to the main menu from the sub-menu, press the [ESC] key. 7. To exit the setup menu, press the [MENU] key. 21 Basic Setup Menu Example The procedure below shows how to configure the following three settings:

Image Adjustment 1 Contrast

Image Adjustment 1 Color Mode

Input Settings Signal Name Indicator Note

The setup menu items that you can change depend on whether or not an image signal is being input to the projector, and on the currently selected input source. Perform the procedure below after starting projection of an image from an input source in the normal input mode. See 3D Input Mode on page 11 for information about how to do this.

This example covers basic steps only. For more detailed information, see Setup Menu Contents on page 29. To configure the Image Adjustment 1 Contrast setting 1. Press the [MENU] key to display the setup menu. 2. Image Adjustment 1 is initially selected on the main menu, so simply press the

[ENTER] key. 3. Use the [] key to select Contrast. 4. Use the [] (lighter) and [] (darker) keys to adjust contrast. 22 To configure the Image Adjustment 1 Color Mode setting 5. Use the [] key to select Color Mode. 6. Press the [ENTER] key.

This displays the color mode menu. 7. Use the [] and [] keys to select the color mode you want, and then press the

[ENTER] key. 8. After selecting the color mode you want, press the [ESC] key. To configure the Input Settings Signal Name Indicator setting 9. Press the [ESC] key. 10. Use the [] key to select Input Settings. 11. Press the [ENTER] key. 12. Use the [] key to select Signal Name Indicator. 13. Use the [] and [] keys to select On or Off. 14. After you are finished, press the [MENU] key to exit the setup menu. Direct Power On You can configure the projector so it powers up automatically as soon as you plug it into a power source. With this Direct Power On feature, you do not even need to press the [P] (Power) key. To enable Direct Power On, display the setup menu, and then change the Direct Power On setting to On. Important!

When you have Direct Power On enabled, do not leave the projector plugged into an electrical outlet while it is turned off. If you do, there is the chance that it (and the light source unit) might turn on automatically when power is restored after being cut off by a power outage, tripping of a breaker, etc. Note

Direct Power On causes the projector to turn on automatically as soon as it is plugged into a power outlet. This greatly reduces the amount of time it takes until you are ready to start projecting. Note, however, that the actual startup sequence (Standby State Power On Projection Starts) that the projector performs is the same, regardless of whether Direct Power On is enabled or disabled. The only difference is what triggers the sequence (plugging in or pressing the [P] (Power) key).

For details about configuring the Direct Power On setting, see Direct Power On under Option Settings 1 Main Menu on page 35. 23 Password Protecting the Projector The password feature lets you keep unauthorized individuals from using the projector. You can specify whether password input is required whenever you turn on the projector, and you can specify and change the password as required. Use the setup menu Option Settings 1 Power On Password setting to configure power on password settings. Inputting a Password The password of your projector is not really a word made up of letters, but rather a sequence of remote controller key inputs. The following is the 8-key sequence that represents the initial factory default password.

[INPUT] [AUTO] [BLANK] [FREEZE] [] [] [] []

Using the Password Feature Note the following precautions whenever you use the password feature.

The password feature protects against unauthorized use of the projector. Note that it is not an anti-theft measure.

You will need to enter the initial factory default password the first time you use the projector after turning on the password feature. Change the initial factory default password to a different one of your choice as soon as possible after turning on the password feature.

Remember that password operations are always performed using the remote controller, so you should take care not to lose or misplace the remote controller.

Also note that you will not be able to input the password if the remote controller batteries are dead. Replace the remote control batteries as soon as possible after it starts to go low. If you forget your password... You will not be able to use the projector if you forget the password for some reason. If you forget the password, you will need to bring the following two items to your CASIO distributor to have the password cleared. Note that you will be charged to have the password cleared. 1. Personal identification (original or copy of your drivers license, employee I.D., etc.) 2. Projector unit Note that your CASIO distributor will not be able to clear the password of your projector unless you bring both of the items listed above. Also, keep the projectors warranty in a safe place. Important!

Having your password cleared using the procedure described above will return all of the settings of your projector, except for the Light Time, to their initial factory defaults. 24 Keep a written record of your password!

You will not be able to use the projector if you forget its password. We strongly suggest that you keep a written or other type of record of the password so you can look it up when necessary. To change the password 1. Press the [MENU] key to display the setup menu. 2. Use the [] key to select Option Settings 1, and then press the [ENTER] key. 3. Use the [] key to select Power On Password, and then press the [ENTER]

key.

This will display a dialog box prompting you to enter the current password. 4. Enter the current password.

If the projector is still protected by the factory default password, perform the key operation shown below to enter it.

[INPUT] [AUTO] [BLANK] [FREEZE] [] [] [] []

5. After entering the current password, press the [ENTER] key.

This displays the Power On Password setting screen. 6. Use the [] key to select Change Password, and then press the [ENTER] key.

This will display a dialog box prompting you to enter the new password. 7. Enter a key sequence up to eight key operations long.

You can use any of the following keys as part of your password key sequence.

[INPUT], [AUTO], [BLANK], [FREEZE], [VOLUME], [COLOR MODE], [D-ZOOM +], [D-ZOOM ],

[KEYSTONE +], [KEYSTONE ], [MENU], [POINTER], [O], [f], [Z], [], [], [], [], [FUNC]

8. After entering the new password, press the [ENTER] key.

This will display a dialog box prompting you to enter the same password again. 9. Re-enter the same password key sequence you entered in step 7 and then press the [ENTER] key.

The message Your new password has been registered. indicates that the password has been changed. Press the [ESC] key.

If the password you entered in this step is different from the one you entered in step 7, the message The password you input is wrong. appears. Press the [ESC] key to return to step 7. 25 To turn password protection on and off 1. Display the Power On Password setting screen by performing steps 1 through 5 of the procedure under To change the password on page 25.

At this time, make sure that Power On Password is selected on the Power On Password setting screen. 2. Use the [] and [] keys to select On or Off.

Changing the power on password setting from Off to On causes the confirmation dialog box shown below to appear. Press the [ENTER] key to confirm that you want to turn on power on password protection, or

[ESC] to exit the dialog box without doing anything. 3. After you are finished, press the [MENU] key to exit the setup menu. Entering the Password when Turning On the Projector When you turn on the projector while password protection is turned on will cause a password input dialog box to appear on the projection screen. All projector operations will be accessible to you after you input the correct password and press the [ENTER] key. 26 Restoring Projector Settings to Their Initial Factory Defaults You can use the procedures in this section to restore all of the settings on a particular main menu or all of the settings on the setup menu to their initial factory defaults. To restore all settings on a particular main menu to their initial factory defaults 1. Press the [MENU] key to display the setup menu. 2. Use the [] and [] keys to select the main menu whose settings you want to restore to their initial factory defaults.

You can select Image Adjustment 1, Image Adjustment 2, Volume Adjustment, Screen Settings, Input Settings, Option Settings 1, or Option Settings 2. 3. Press the [ENTER] key. 4. Use the [] key to select Restore Menu Defaults. 5. Press the [ENTER] key.

This will display a confirmation screen like the screen shown below. 6. Use the [] key to select Yes. 7. To restore the settings of the main menu to their initial defaults, press the

[ENTER] key.

To exit the operation without doing anything, press [ESC] instead of [ENTER]. 8. After you are finished, press the [MENU] key to exit the setup menu. Note

The language setting and the password are not returned to their initial factory defaults if you select Option Settings 1 in step 2.

For details about how the above procedure initializes settings, see the explanations of the settings under Setup Menu Contents on page 29. 27 To restore all settings on the setup menu to their initial factory defaults 1. Press the [MENU] key to display the setup menu. 2. Use the [] key to select Restore All Defaults and then press the [ENTER] key. 3. After confirming that Restore All Defaults sub-menu is selected, press the

[ENTER] key.

This displays a confirmation message asking if you want to initialize all settings. 4. Use the [] key to select Yes. 5. To restore all settings on the setup menu to their initial defaults, press the

[ENTER] key.

This will restore all of the settings to their initial factory defaults, except for the Language, Light Time, Unit Operating Time and password settings.

To exit the operation without doing anything, press [ESC] instead of [ENTER]. 6. After you are finished, press the [MENU] key to exit the setup menu. 28 Setup Menu Contents This section contains tables that provide detailed explanations of all of the items included on the setup menu. The following describes the type of information that appears in each of the columns of the tables. Setting Name: This column shows the names of the settings as they appear on the sub-menu. Input: This column shows the input source for which each setting is supported. Input source names are abbreviated as follows:

R : RGB input C : Component video input V : Video or S-video input H : HDMI (PC) input D : HDMI (DTV) input U : USB input (USB port models only) The letter N indicates that the setting can be configured while there is no input signal. Setting Unit: The setting unit indicates how a setting is stored. Source Specific in this column indicates that separate settings can be stored for each individual input source. Single in this column indicates that a single setting is stored and applied, regardless of the input source. Description: This column provides details about the setting item and how to select it. The initial default setting is indicated by an asterisk (*). Image Adjustment 1 Main Menu Setting Name Setting Unit Input Description Brightness R C V H D U Contrast R C V H D U Sharpness Saturation Tint V V V Source Specific Source Specific Source Specific Source Specific Source Specific Use this sub-menu to adjust the brightness of the projected image. A larger value produces a brighter image. Use this sub-menu to adjust the contrast of the projected image. A larger value produces a stronger contrast. Use this sub-menu to adjust the sharpness of the outlines in the projected image. A larger value makes the image sharper, while a smaller value makes it softer. Use this sub-menu to adjust the color saturation of the projected image. A larger value increases color saturation. Use this sub-menu to adjust the tint of the projected image. A larger value makes the overall image more bluish, while a smaller value makes the overall image more reddish. This setting is supported only when the signal is NTSC or NTSC4.43. 29 Setting Name Input Setting Unit Description Color Mode R C V H D U Source Specific Color Balance R C V H D U Source Specific Eco Off Mode R C V H D U N Single Restore Menu Defaults R C V H D U Source Specific You can select from among various different color mode settings in accordance with image contents and projection conditions. Standard:

Use this setting when you want to highlight the colors of your presentation. Graphics:

Use this setting when you want photographs and graphics to appear natural. Theater:

Use this setting to bring out the dark portions of your images. Blackboard:

Use this setting for easy viewing when projecting onto a blackboard. Game:

Use this setting to optimize hue and brightness. This sub-menu lets you adjust the color balance of the projected image. Preset:

You can select from among three preset color balance settings:

Warm, Normal,* Cold. Color:

You can adjust the intensity of red, green, and blue within the range of 50 to +50. The intensity of a color increases along with the setting value. Color settings can be adjusted individually only when Normal is selected as the Preset setting. When Off is selected for Option Settings 1 Eco Mode, you can select either of the following projection image modes. Bright:

Gives priority to brightness. Normal:

Suppresses brightness slightly and gives priority to color balance. Use this sub-menu to return all of the sub-menu items on the Image Adjustment 1 main menu to their initial default settings.

Restoring menu defaults when there is no input signal will restore defaults for the currently selected input source. 30 Image Adjustment 2 Main Menu Setting Name Setting Unit Input Description Vertical Position Horizontal Position R C V R C V Frequency R Signal Specific Signal Specific Signal Specific Use this sub-menu to adjust the vertical position of the input source image within the projection area. Use this sub-menu to adjust the horizontal position of the input source image within the projection area. When vertical bands appear in the projected image while RGB is selected as the input source, it means that the frequency setting is not correct. When this happens, use this setting to adjust the frequency manually. Important!

If, for some reason, your manual frequency settings cause the image input from the computer to disappear from the projection, you can press the [AUTO] key to perform an auto adjust operation, which should cause the image to appear. Phase R Signal Specific When there is flickering in the projected image while RGB is selected as the input source, it means that the phase setting is not correct. When this happens, use this setting to adjust the phase manually. Restore Menu Defaults R C V Source Specific Use this sub-menu to return all of the sub-menu items on the Image Adjustment 2 main menu to their initial default settings.

Restoring menu defaults will restore defaults for the current signal type (XGA/60Hz, SXGA/60Hz, etc.) only. About the Signal Specific Setting Unit For the items that have Signal Specific in the Setting Unit column of the above table, the setting is saved for the specific type of signal (XGA/60Hz, SXGA/60Hz, etc.) that is being input when the setting is performed, and not for a specific input source. Volume Adjustment Main Menu Setting Name Setting Unit Input Description Volume R C V H D U N Source Specific Use this sub-menu to adjust the volume level of the projectors speaker.

Changing this setting when there is no input signal changes the volume setting of the currently selected signal source. Restore Menu Defaults R C V H D U N Source Specific Use this sub-menu to return Volume to its initial default setting.

Restoring menu defaults when there is no input signal will restore defaults for the currently selected input source. 31 Screen Settings Main Menu Setting Name Setting Unit Input Description Keystone Correction R C V H D U N Single Use this sub-menu to correct vertical keystoning of the projected image. Aspect Ratio R C V H D Source Specific Use this sub-menu to select an aspect ratio setting for the projected image. Input Source: RGB or HDMI (PC) Normal*:

Projects at the projectors maximum possible size while maintaining the input signal aspect ratio. Full:

Projects at the projectors maximum possible size by enlarging or reducing the input signal. Input Source: Video, S-video, Component or HDMI (DTV) Normal*:

Projects at the projectors maximum possible size while maintaining the input signal aspect ratio. 16:9 :

This setting specifies a 16:9 aspect ratio, which is the same as a movie screen, high-definition TV, etc. Using this setting when the input signal is a 16:9 image that has been squeezed to a 4:3 image causes the image to be displayed with its normal 16:9 aspect ratio. Note

When the input source is a component or an HDMI (DTV) signal with an aspect ratio of 16:9, the aspect ratio is fixed at 16:9. The aspect ratio setting cannot be changed in this case.

For details about projection screen display conditions for different aspect ratio settings, see Aspect Ratio Setting and Projection Image (page 50). Projection Mode R C V H D U N Single Ceiling Mount R C V H D U N Single Important!

Note that enlarging or reducing the size of an image for commercial purposes or public presentation may infringe on the legally protected copyright of the copyright holder of the original material. Use this sub-menu to specify whether projection will be from the front of the screen or the back of the screen. Front*:

Select this option to project from the front of the screen. Rear:

Select this option to project from the back of the screen. This setting flips the front projected image horizontally. Use this sub-menu to configure the projector for use in an installation in which it is positioned upside down. On:

Flips the projected image horizontally and vertically. Off*:

Projects a normal image. 32 Setting Name Input Setting Unit Description Startup Screen R C V H D U N Single No Signal Screen R C V H D U N Single Blank Screen R C V H D U N Single Restore Menu Defaults R C V H D U N Source Specific Use this sub-menu to specify whether or not a startup screen should be projected whenever the projector is turned on. Logo:

Select this option to project the projectors built-in logo screen at startup. None*:

Select this option when you do not want to project a startup screen. Use this sub-menu to specify what should be projected when there is no input signal to the projector. Blue*:

Select this option to project a blue screen. Black:

Select this option to project a black screen. Logo:

Select this option to project the projectors built-in logo screen. Use this sub-menu to specify what should be projected after the

[BLANK] key is pressed. Blue:

Select this option to project a blue screen. Black*:

Select this option to project a black screen. Logo:

Select this option to project the projectors built-in logo screen. Use this sub-menu to return all of the sub-menu items on the Screen Settings main menu to their initial default settings.

Restoring menu defaults when there is no input signal will restore defaults for the currently selected input source.

Note that the Keystone Correction, Projection Mode, Ceiling Mount, Startup Screen, No Signal Screen, and Blank Screen settings are always returned to their initial defaults, regardless of the currently selected input source. 33 Input Settings Main Menu Setting Unit Setting Name Input R C N Single COMPUTER 1 Terminal/

COMPUTER 2 Terminal Video Signal/

S-video Signal V N Single Signal Name Indicator R C V H D U N Single Restore Menu Defaults R C V H D U N Source Specific Description Use this sub-menu to specify manually the type of signal being input from the projectors COMPUTER IN 1/COMPUTER IN 2 terminal. Auto*:

Automatically detects the signal being input from the COMPUTER IN 1/COMPUTER IN 2 terminal and configures the appropriate input protocol. RGB:

Select this option when a computer is connected to the COMPUTER IN 1/COMPUTER IN 2 terminal. For details about connecting a computer, see Connecting a Computer to the Projector in the Setup Guide. Component:

Select this setting when the projectors COMPUTER IN 1/

COMPUTER IN 2 terminal is connected to the component video output terminal of a video device using a commercially available component video cable. For information about connection, see Connecting to a Video Device (page 44). Note The setting of this item cannot be changed while the projector is in the 3D input mode (3D Input Mode, page 11) or On is selected for the Option Settings 2 Interactive Pointer setting. Use this sub-menu to specify manually the type of signal being input from the projectors VIDEO terminal or S-VIDEO terminal. Auto*:

Select this setting to have the projector switch the video signal system automatically in accordance with the input signal from the video device that is connected to the VIDEO terminal or S-VIDEO terminal. NTSC / NTSC4.43 / PAL / PAL-M / PAL-N / PAL60 / SECAM:

Each setting selects the applicable video system. Use these settings when you want to specify only one specific video signal for the VIDEO terminal or S-VIDEO terminal. Use this sub-menu to specify whether or not the name of the currently selected signal source should be displayed in the projected image. On*:

Select this option to turn on display of the name of the currently selected signal source in the projected image. Off:

Select this option to turn off display of the signal source name. Use this sub-menu to return all of the sub-menu items on the Input Settings main menu to their initial default settings.

Restoring menu defaults when there is no input signal will restore defaults for the currently selected input source.

Note that the Signal Name Indicator setting is always returned to its initial default, regardless of the currently selected input source. 34 Option Settings 1 Main Menu Setting Name Setting Unit Input Description Auto Keystone Correction R C V H D U N Single Auto Adjust R N Source Specific Use this sub-menu to turn auto keystone correction on or off. On*:

Select this option to turn on auto keystone correction. Off:

Select this option to turn off auto keystone correction. Use this sub-menu to select whether the projector should detect the RGB input signal type (resolution, frequency) and adjust the projection image accordingly (auto adjust). 1*:

Select this option to turn on auto adjust. 2:

3:

Select this option to turn on auto adjust when a 1360 768 or 1400 1050 signal is not projected correctly. Select this option to turn on auto adjust when a 1366 768 signal is not projected correctly. Off:

Select this option to turn off auto adjust. Eco Mode R C V H D U N Single See Eco Mode (Power Saving, Low Noise) (page 19). Auto White Balance R C V H D U N Single Auto Power Off R C V H D U N Single Power On Password R C V H D U N Single Direct Power On R C V H D U N Single Turns automatic white balance adjustment on or off. On*:

White balance adjusted automatically. Can improve color reproduction. Off:

White balance not adjusted automatically. Auto Power Off lets you specify the amount of time of projector operation and input signal inactivity to be allowed before Auto Power Off is triggered to turn off projector power automatically. Auto Power Off can be disabled, if you want. 5 min, 10 min*, 15 min, 20 min, 30 min:

Time until Auto Power off is triggered. Off:

Disables Auto Power Off. You can configure the projector to require input of a password before operation is enabled. For details, see Password Protecting the Projector on page 24. Use this sub-menu to turn Direct Power On on or off. See Direct Power On on page 23. On:

Select this option to turn on Direct Power On. Off*:

Select this option to turn off Direct Power On. 35 Setting Name Input Setting Unit Description Language R C V H D U N Single Restore Menu Defaults R C V H D U N Single Use this sub-menu to specify the language to use for messages, setup menus, etc. English / French / German / Italian / Spanish / Swedish /

Portuguese / Turkish / Russian / Chinese (Simplified) /

Chinese (Traditional) / Korean / Japanese Note

(for USB port model users) If you have Portuguese, Turkish, or Russian selected as the projectors language, selecting an external device connected to the projectors USB-A port as the input source will cause some menus and messages to be displayed in English. This sub-menu returns all of the sub-menu items on the Option Settings 1 main menu to their initial default settings.

The language setting and the password are not returned to their initial factory defaults.

The Auto Adjust item is returned to its initial default only when RGB input is selected for the input source. All of the other items are returned to their initial defaults regardless of the currently selected input source. Option Settings 2 Main Menu Setting Name Setting Unit Input Description Pointer R C V H D U N Single Use this sub-menu to specify the type of pointer that appears first when you press the [POINTER] key. Plug and Play

(USB port models only) R C V H D U N Single Use this sub-menu to turn plug-and-play*1 on or off. On*:

Select this option to turn on plug-and-play. This will allow the projector detect when an external USB device is connected and make that device the input source automatically. Off:

Select this option to turn off plug-and-play. Note Regardless of the setting of this item, plug-and-play is disabled while the projector is in the 3D input mode (3D Input Mode, page 11) or On is selected for the Option Settings 2

Interactive Pointer setting. Specifies whether the input audio signal should be output from the projectors built-in speaker or to the line output. Speaker*:

Outputs the audio signal being input to the projector from the speaker. Line:

Outputs the audio signal being input to the projector from the AUDIO OUT terminal. Audio Out R C V H D U N Single D 36 Setting Name Input Setting Unit Description High Altitude R C V H D U N Single Closed Caption V N Single Interactive Pointer R H Single Use this sub-menu to turn the high-altitude fan speed setting on or off in accordance with the altitude of the area where you are using the projector. On:

Select this setting when using the projector in a high altitude

(1,500 to 3,000 meters above sea level) area where air is thin. This setting increases cooling efficiency. Off*:

Select this setting at normal altitudes (up to 1,500 meters). Important!

Do not use this projector at altitudes greater than 3,000 meters above sea level. Specifies whether to display closed captions when projecting a video signal that includes them. Off*:

Closed captions not displayed. CC1, CC2, CC3, CC4:

Indicates the current closed caption output setting (CC1, CC2, CC3, CC4). Note Keystone correction does not affect displayed closed caption text. Enables/disables operation of the optionally available interactive pointer (YA-P10). On:

Interactive pointer operation enabled. Off*:

Interactive pointer operation disabled. Important!

Select On for this item only when using an interactive pointer. Select Off when you are not using it. Note Regardless of this setting, interactive pointer operation is always disabled when the projector is in the 3D input mode

(page 11). Restore Menu Defaults R C V H D U N Single This sub-menu returns all of the sub-menu items on the Option Settings 2 main menu to their initial default settings.

*1 When plug-and-play is turned on, the projector will make that device the input source automatically. For details about plug-and-play, see USB Function Guide on the bundled CD-ROM. 37 Wired LAN Settings Main Menu (USB Port Models Only) Setting Name Setting Unit Description Input Remote on R C V H D U N Single Specifies whether the projector can be turned on via wired LAN while the projector is in standby (projector off with power being supplied). Enable:

Power on enabled. Disable*:

Power on disabled. Important!

Performing an Initialize Network Settings operation or Restore All Defaults operation with the setup menu will cause this setting to change to Disable. If you are operating the projector using a wired LAN setting, be sure to change this setting back to Enable after initialization. PJLink authentication R C V H D U N Single Enables and disables PJLink connection authentication. Enable*:

PJLink connection authentication enabled. Wired LAN info R C V H D U N Single R C V H D U N Single Initialize Network Settings Disable:

PJLink connection authentication disabled. Displays the following information. Projector name:

Name currently assigned to the projector. MAC Address:

Fixed MAC address assigned to each individual projector. IP Address:

Projectors current IP address. DHCP:

Projectors current DHCP setting status (Auto or Disable). The projector name, IP address, and DHCP settings can be configured using the projector System Admin page, which can be accessed on a computer connected by LAN to the projector. For details, see the Wireless Function Guide on the CD-ROM that comes with the projector. Returns all projector network settings (all settings on the System Admin page) to their initial defaults. For detailed information about System Admin page settings, see the System Admin Page Settings section in the Wireless Function Guide on the CD-ROM that comes with the projector. USB Settings Main Menu (USB Port Models Only) The USB Settings main menu is available only when there is an external device connected to the USB-A port of the projector. For details, see USB Function Guide and Wireless Function Guide on the bundled CD-ROM. 38 Operational Info Main Menu Setting Name Setting Unit Input Description Input Signal R C V H D U N Source Specific Signal Name R C V H D U Resolution R H Horizontal Frequency Vertical Frequency R C V H D R C V H D Scan System R C H D Source Specific Source Specific Source Specific Source Specific Source Specific Light Time R C V H D U N Single This sub-menu item shows the currently selected input signal

(RGB, Component, Video, S-video, HDMI (PC), or HDMI (DTV)).

- - - - is indicated here when there is no input signal. This sub-menu item shows the signal name of the signal being input to the projector. For details about signal names, see Signal Name under Supported Signals on page 52. This sub-menu item appears only when RGB is the input signal. It shows the number of vertical and horizontal pixels of resolution of the RGB or HDMI (PC) input signal. This sub-menu item shows the horizontal frequency of the input signal. This sub-menu item shows the vertical frequency of the input signal. This sub-menu item appears only when RGB, Component, HDMI (PC), or HDMI (DTV) is the input signal, and shows the scan system of the input signal. The scan system is interlace or non-interlace for an RGB or HDMI (PC) signal input, and interlace or progressive for a component or HDMI (DTV) signal input. This sub-menu item shows the cumulative number of hours the current light source unit has been used to date. Restore All Defaults Main Menu Setting Name Setting Unit Input Description Unit Operating Time Restore All Defaults R C V H D U N Single R C V H D U N Single This sub-menu item shows the cumulative operating time of this unit. This time cannot be initialized. This sub-menu returns all sub-menu items on all main menus to their initial default settings. This operation can be performed regardless of the currently selected input source and regardless of whether or not a signal is currently being input. For details about this procedure, see To restore all settings on the setup menu to their initial factory defaults on page 28. 39 Cleaning the Projector Periodically clean the projector exterior, lens, intake vents, and intake-exhaust vents on a regular basis. Important!

Before cleaning the projector, be sure to unplug it from the power outlet and make sure it is cooled down completely. Cleaning the Projector Exterior Wipe the exterior of the projector with a soft cloth that has been moistened in a weak solution of water and a mild neutral detergent. Be sure to wring all excess moisture from the cloth before wiping. Never use benzene, alcohol, thinner, or any other volatile agent for cleaning. Cleaning the Lens Carefully wipe the lens with a commercially available lens cloth or optical lens paper, like those for eyeglasses or camera lenses. When cleaning the lens, do not apply undue force and take care to avoid damaging the lens. Cleaning the Vents Dust and dirt tend to collect around the vents. Because of this, you should use a vacuum cleaner to clean away accumulated dust and dirt periodically as shown below. Important!

Continued use of the projector after dust has accumulated around the vents can cause overheating of internal components and lead to malfunction. 40 Error Indicators and Warning Messages Warning messages and indicators let you know what the problem is when a projector error occurs. When an error occurs, wait until the fan stops before unplugging the AC power cord. If you unplug the AC power cord while the fan is still operating, an error may occur when you plug the AC power cord back in. Indicator/Error Message Description and Required Action POWER

: Green steady LIGHT TEMP

Message : Internal temperature is too high. Check projector air vents for blockage. POWER

: Amber flashing Amber steady LIGHT TEMP

Message : Internal temperature is too high. The projector will turn off. POWER

: Amber flashing Red steady

: Red steady

: Red steady LIGHT TEMP Message : There is a problem with the fan. The projector will turn off. POWER

: Amber flashing Red steady

: Red steady LIGHT TEMP Message : A system problem has occurred. The projector will turn off. The projectors internal temperature is very high. Press the [ESC] key to clear the warning message and perform the following steps. 1 Check for any blocking of the projectors vents, and make sure that there is sufficient space around the projector. See Setup Precautions in the Setup Guide. 2 If there is dust accumulated around the vents, turn off the projector and remove it. See Cleaning the Projector (page 40). Power has turned off automatically due to internal overheating. Perform the following steps. 1 Check for any blocking of the projectors vents, and make sure that there is sufficient space around the projector. See Setup Precautions in the Setup Guide. 2 If there is dust accumulated around the vents, remove it. See Cleaning the Projector (page 40). If there is no problem with the projectors vents, confirm that the POWER/

STANDBY indicator is lit amber (without flashing), and then turn power back on again. If the error occurs again when you turn power back on, contact your retailer or nearest authorized CASIO Service Center. Power has turned off automatically due to a fan problem. Confirm that the POWER/STANDBY indicator is lit red (without flashing) and that the fan has stopped. After checking the POWER/STANDBY indicator, disconnect the power cord from the projector and wait for all of the projectors indicators to go out. Next, reconnect the power cord and turn projector power back on. If the error occurs again when you turn power back on, contact your retailer or nearest authorized CASIO Service Center. Power has turned off automatically due to a system problem. After confirming that the POWER/STANDBY indicator is lit red (without flashing), disconnect the power cord from the projector and wait for all of the projectors indicators to go out. Next, reconnect the power cord and turn the projector back on. If the error occurs again when you turn power back on, contact your retailer or nearest authorized CASIO Service Center. 41 Indicator/Error Message Description and Required Action POWER

: Green steady LIGHT TEMP

Message : A system problem has occurred. Normal projection is not possible. POWER

: Green steady LIGHT TEMP

Message : There is some problem with the system. The audio function may not operate correctly. POWER

: Green steady LIGHT TEMP

Message : Some problem occurred with the USB port or LAN terminal. POWER

: Amber flashing Red steady

: Red steady LIGHT TEMP Message :

POWER

: Amber flashing Red steady LIGHT

: Red flashing

(0.5-second interval) TEMP

: Red flashing

(0.5-second interval) Message :

POWER

: Amber flashing Red steady LIGHT TEMP

: Not lit or red flashing

: Red flashing

(2-second interval) Message :

A system problem has occurred, which may cause problems with some functions. Turn off the projector, disconnect the power cord from the projector and wait for all of the projectors indicators to go out. Next, reconnect the power cord and turn the projector back on. If the error occurs again when you turn power back on, contact your retailer or nearest authorized CASIO Service Center. Press the [ESC] key to clear the warning message. The USB or LAN connection was terminated because of a problem with the USB port or LAN port. To use the USB or LAN function, turn off the projector and then turn it back on again. If the error occurs again when you turn power back on, contact your retailer or nearest authorized CASIO Service Center. Press the [ESC] key to clear the warning message. The projector was turned off automatically due to some problem that was probably caused by external digital noise or some other reason. Confirm that the POWER/STANDBY indicator is lit red (without flashing). After checking the POWER/STANDBY indicator, disconnect the power cord from the projector and wait for all of the projectors indicators to go out. Next, reconnect the power cord and turn projector power back on. If the error occurs again when you turn power back on, contact your retailer or nearest authorized CASIO Service Center. The projector was turned off automatically because the light source unit turned off or did not turn on. After confirming that the POWER/STANDBY indicator is lit red (without flashing), unplug the power cord. Wait for a short while and then plug it back in and turn on the projector again. If the error occurs again when you turn power back on, contact your retailer or nearest authorized CASIO Service Center. Power has turned off automatically due to a projector memory error. Confirm that the POWER/STANDBY indicator is lit red (without flashing). After checking the POWER/STANDBY indicator, disconnect the power cord from the projector and wait for all of the projectors indicators to go out. Next, reconnect the power cord and turn projector power back on. If the error occurs again when you turn power back on, contact your retailer or nearest authorized CASIO Service Center. 42 Indicator/Error Message POWER

: Amber flashing LIGHT TEMP Red steady

: Amber flashing

(1-second interval) Message :

Description and Required Action Power has turned off automatically because the light source unit cover is open. Perform the following steps. 1 After confirming that the POWER/STANDBY indicator is lit red (without flashing), disconnect the power cord from the projector. 2 Check to make sure that the light source unit cover is closed. 3 Plug the power cord back in and turn the projector back on again. If the error occurs again when you turn power back on, contact your retailer or nearest authorized CASIO Service Center. 43 Appendix Connecting to a Video Device The projector is able to project images from the composite video output, S-video output, or component video output of a connected video device. Important!

Always turn off the projector and the video device before connecting them. Connection to a composite video output or S-video output Projector Video device To S-VIDEO terminal S-video cable (commercially available) To S-video output terminal To video/audio output terminal Red: To AUDIO IN R terminal White: To AUDIO IN L terminal Yellow: To VIDEO terminal Pin plug type video/audio cable

(commercially available) Note Note that regardless of whether the image being projected is being input via the projectors S-VIDEO terminal or VIDEO terminal, the projector outputs audio that is input via the projectors AUDIO IN L/R terminals. 44 Connection to a component video output Projector COMPUTER IN 1 terminal AUDIO IN 1 terminal Component video cable (commercially available) Video device To component video output terminals COMPUTER IN 2 terminal AUDIO IN 2 terminal To AUDIO output terminals White Red Stereo mini plug Pin plug type audio cable

(commercially available)

Component video output terminals come in 3-terminal sets: YCbCr or YPbPr. Be sure to match the colors of the plugs on a component video cable with the colors of the terminals (Green: Y;

Blue: Cb/Pb; Red: Cr/Pr).

Note that connection only to an analog component video output terminal is supported. Connection to a digital output terminal is not supported. 45 Connecting the HDMI Output of a Video Device or Computer to the Projector The projector supports projection and output of HDMI video and audio output from a computer or video device. Important!

Turn off the projector and the computer or video device before connecting them. Projector HDMI port Computer or video device HDMI cable (commercially available) To HDMI output terminal

You will need to obtain a commercially available HDMI cable with a connector that matches the terminal of the output device on one end and a connector that matches the projectors HDMI port

(HDMI Type A Socket) on the other end.

For information about HDMI video signal supported by the projector, see page 54.

The projector supports L-PCM 32kHz, 44.1kHz, and 48kHz HDMI audio signals. 46 Remote Controller Signal Range When performing an operation on the remote controller, point it at the remote control signal receiver on the back or front of the projector. The following illustration shows the range of the remote controller signal. 30 degrees max. 5 meters (16.4 feet) max. Front 30 degrees max. 5 meters (16.4 feet) max. Back 30 degrees max. 5 meters (16.4 feet) max. 5 degrees to 30 degrees 5 meters (16.4 feet) max. Remote Controller Range The allowable distance between the remote controller and the projector is less when there is a sharp angle between the remote controller and the remote control signal receiver. Important!

To avoid running down the batteries, store the remote control unit so its keys are not pressed inadvertently. 47 Hanging the Projector from a Ceiling The projector can be hung from a ceiling. When doing so, the projector should be turned upside down, and secured to the ceiling. You also need to install a safety wire to ensure that the projector cannot fall accidentally. To attach the safety wire, remove the sticker on the bottom of the projector and attach the wire there. For full details, contact the retailer where you purchased the projector. Sticker Important!

When hanging the projector from a ceiling, make sure that it is at least one meter away from fire detectors, fire alarms, and other fire protection devices. Locating the projector too close to a fire protection device creates the risk of mis-operation of the device due to warm air exhausted from the projector. Also, avoid locating the projector close to fluorescent lights or other strong light sources. Bright light can shorten the operating range of the remote controller or even make remote control impossible. When selecting a location for the projector, be sure to test for proper operation of the remote controller.

The vertical and horizontal orientation of the projected image is reversed from the normal configuration when projecting from a projector hung from the ceiling. You need to change the setup of the projector in order to correct for this. For details, see the Ceiling Mount option under Screen Settings Main Menu (page 32). 48 Projection Distance and Screen Size h*

The following table shows the relationship between the distance and projected image size. XJ-H1600/XJ-H1650/XJ-H1700/XJ-H1750 XJ-ST145/XJ-ST155 Projection Size Approximate Projection Distance Projection Size Screen Diagonal Size

(cm) 27 40 60 80 100 150 200 300 69 102 152 203 254 381 508 762 Minimum Distance

(m / feet) 0.85/2.79 1.3/4.27 1.9/6.23 2.6/8.53 Maximum Distance

(m / feet) 1.0/3.28 1.6/5.25 2.3/7.55 3.1/10.17 3.3/10.83 3.9/12.8 4.9/16.08 5.9/19.36 6.6/21.65 7.9/25.92 9.9/32.48 11.9/39.04 h*

0 0 0 0 0 0 0 0 Screen Diagonal Size

(cm) 45 60 80 100 142 114 152 203 254 361 Approximate Projection Distance

(m / feet) h*

(cm / inch) 0.6/1.97 0.8/2.62 1.1/3.61 1.4/4.59 2.0/6.56 6/2.36 8/3.15 10/3.94 13/5.12 19/7.48

* h = Height from the center of the lens to the bottom edge of the projection screen. Important!

Note that the distances provided above are for reference only. D 49 Aspect Ratio Setting and Projection Image The following shows how images are projected in accordance with the type of the input signal and the aspect ratio setting of the projector. Input source: RGB or HDMI (PC) Input Signal SVGA (800 600) Normal Full XGA (1024 768) WXGA (1280 800) SXGA (1280 1024) 50 Input source: Video, S-video, component or HDMI (DTV) Input Signal 4:3 Aspect Image Normal 16:9 Squeezed Image Letter Box Image 51 Supported Signals Important!

Even if a signal is listed in the table below, it does not guarantee that you will be able to display its images correctly. RGB Signal VESA Other Signal Name Resolution Horizontal Frequency

(kHz) Vertical Frequency

(Hz) 640 480/60 640 480/72 640 480/75 640 480/85 800 600/56 800 600/60 800 600/72 800 600/75 800 600/85 1024 768/60 1024 768/70 1024 768/75 1024 768/85 1152 864/75 1280 768/60 1280 800/60 1280 960/60 1280 960/85 1280 1024/60 1280 1024/75 1280 1024/85 1360 768/60*1 1366 768/60*2 1400 1050/A*1 1440 900/60 1600 1200/60 1680 1050/60 1152 864/70 1400 1050/B*1 640 480 640 480 640 480 640 480 800 600 800 600 800 600 800 600 800 600 1024 768 1024 768 1024 768 1024 768 1152 864 1280 768 1280 800 1280 960 1280 960 1280 1024 1280 1024 1280 1024 1360 768 1366 768 1400 1050 1440 900 1600 1200 1680 1050 1152 864 1400 1050 31.5 37.9 37.5 43.3 35.2 37.9 48.1 46.9 53.7 48.4 56.5 60.0 68.7 67.5 47.8 49.7 60.0 85.9 64.0 80.0 91.1 47.7 47.7 65.3 55.9 75.0 65.3 64.0 64.0 60 73 75 85 56 60 72 75 85 60 70 75 85 75 60 60 60 85 60 75 85 60 60 60 60 60 60 70 60

*1 If these signals do not project correctly, change the Option Settings 1 Auto Adjust setting to 2

(page 35).

*2 If this signal does not project correctly, change the Option Settings 1 Auto Adjust setting to 3

(page 35). 52 Component Signal Signal Name Horizontal Frequency

(kHz) Vertical Frequency

(Hz) HDTV SDTV 1080p/50 1080p/60 720p/50 720p/60 1080i/50 1080i/60 576p/50 576i/50 480p/60 480i/60 56.3 67.5 37.5 45.0 28.1 33.7 31.3 16.6 31.5 15.7 50 60 50 60 50 60 50 50 60 60 Video Signal, S-video Signal Signal Name NTSC NTSC4.43 PAL PAL-M PAL-N PAL60 SECAM Horizontal Frequency

(kHz) Vertical Frequency

(Hz) 15.7 15.7 15.6 15.7 15.6 15.7 15.6 60 60 50 60 50 60 50 53 HDMI Signal Signal Name 640 480/60 800 600/60 1024 768/60 1280 768/60 1280 800/60 1280 960/60 1280 1024/60 1400 1050/60 SDTV (480p) SDTV (576p) HDTV (720p) (50) HDTV (720p) (60) HDTV (1080i) (50) HDTV (1080i) (60) HDTV (1080p) (50) HDTV (1080p) (60) Horizontal Frequency

(kHz) Vertical Frequency

(Hz) 31.5 37.9 48.4 47.8 49.7 60 64 65.3 31.5 31.25 37.5 45 28.13 33.75 56.25 67.5 60 60 60 60 60 60 60 60 60 50 50 60 50 60 50 60 3D Signals (3D Input Mode) Signal Name Horizontal Frequency

(kHz) Vertical Frequency

(Hz) RGB Signal 640 480/60 640 480/120 800 600/60 800 600/120 1024 768/60 1024 768/120 1280 768/60 1280 768/120 1280 800/60 1280 800/120 Video Signal NTSC 31.5 61.7 37.9 77.2 48.4 98.8 47.8 97.4 49.7 101.6 15.7 60 120 60 120 60 120 60 120 60 120 60 54 Using Wired LAN to Control the Projector

(XJ-H1650, XJ-H1750, XJ-ST145, XJ-ST155) The projector can be controlled by a computer or other external device by connecting the device to the projectors LAN port. Supported External Devices This projector supports all commands of PJLink Class1 (Version 1.00). http://pjlink.jbmia.or.jp/english/

This projector is supported by the commands of the Crestron Electronics controller and software

(RoomView). http://www.crestron.com/

This projector is supported by AMX Device Discovery. http://www.amx.com/

Information about the types of external devices that can be connected to the LAN port and control the projector, as well as the control commands supported for each external device will be published on the CASIO website below as such information becomes available. http://www.casio.com/support/

Controlling the Projector from a Computer When the projector is linked to a computer over a wired or wireless LAN connection, you can use the computers Web browser to access a Wireless Presentation System control panel to control the projector. To establish a wired LAN connection between the projector and a computer 1. Connect the LAN port of the projector to the LAN hub or other network devices to which the computer is connected. Projector Computer LAN hub

In a configuration like the one in the illustration above, you should normally use straight type LAN cables. If you are connecting the projectors LAN port directly to the LAN port of a computer, use a cross type LAN cable. D 55 2. Look up the projectors IP address.

Perform the following steps to look up the projectors current IP address. 1. Press the [MENU] key to display the setup menu. 2. Use the [] and [] keys to select Wired LAN settings and then press the [ENTER] key. 3. Use the [] and [] keys to select Wired LAN info and then press the [ENTER] key. 3. On the computer, start up a Web browser. 4. In the Web browser address bar, input the projectors IP address and then press the [Enter] key.

If the projectors current IP address is 192.168.100.10, for example, you would input:

http://192.168.100.10.

This displays the top page of the projectors System Admin page.

For information about what you should do next, see To control the projector using the Wireless Presentation System control panel (page 57). Important!

Under initial default settings, the projector is configured to obtain its IP address automatically from the DHCP server. This means that an IP address will be assigned automatically whenever the projector is connected to a DHCP environment network. Depending on the network environment being connected to, there may be cases where you will need to assign a projectors IP address manually. In such cases, you will need to configure projectors network settings. If you are unable to display the projectors System Admin page with your browser using the above procedure, it may mean that there is some problem with your network settings. Refer to the Wireless Function Guide on the CD-ROM that comes with the projector and establish a wireless LAN connection between the projector and your computer. After configuring the projectors network settings, try performing the above procedure again. For details about the projectors network settings, see To configure projectors network settings and wireless LAN connection settings in the Wireless Function Guide. 56 To control the projector using the Wireless Presentation System control panel 1. Depending on the type of LAN connection you are using, perform either of the following operations to display the top page of the projectors System Admin page. Wired LAN Connection

: To establish a wired LAN connection between the projector and a Wireless LAN Connection : Steps 1 and 2 under To log in to the projectors System Admin computer (page 55) page of the Wireless Function Guide on the CD-ROM that comes with the projector 2. Click System Admin. On the password input screen that appears, enter the password.

The initial default password is admin. 3. Click the [Login] button.

This logs in to the System Admin page and displays the Status screen. 4. Click Control Panel on the left side of the screen.

This will display a control panel screen like the one shown below.

The table below explains the status information and the projector operations included on the control panel screen. Group Item Description Refresh (Button) Click to refresh the screen with the latest information. Status Projector status Shows the projectors current status as either On or Standby. Error info Shows one of the following. Normal: Operating normally. Temperature error: Temperature error occurred. Fan error: Fan error occurred. Light error: Light source unit error occurred. Other error: Error other than above occurred. Power On/Power Off

(Buttons) Turn the projector on/off.

[Power On] button operation is supported only when the projector is connected to a computer of a wired LAN connection, and Enable is selected for the Remote on setting (pages 38). D 57 Group Item Image Input Description Specifies the input source. The following are the available input source options. 3D On Computer 1/2 (RGB) Video S-video 3D Off Computer 1/2 (Auto) Computer 1/2 (RGB) Computer 1/2 (Component) Video S-video HDMI USB 3D Puts the projector into the 3D input mode or normal input mode. On: 3D input mode Off: Normal input mode

Note that this setting cannot be change while the currently selected input source is Computer 1 (Component), Computer 2

(Component), HDMI, or USB. Color mode Specifies the color mode.

For details about this setting, see Selecting the Color Mode (page 14). Blank Selecting On for this setting temporarily blocks the image from the input source. Off causes the image from the input source to be projected.

The operation of this item is identical to that of the remote controllers

[BLANK] key. For details, see Momentarily Cutting Off the Input Source Image (page 15). Aspect ratio Changes the aspect ratio of the projected image.

For details about this setting, see Changing the aspect ratio of the projected image (page 17). Brightness Contrast Eco Mode Audio Volume Mute Audio Output Factory Defaults (Button) This corresponds to the Image Adjustment 1 Brightness setting of the setup menu. Input a value into the box and then click the [Apply]

button. This will change the projectors Brightness setting accordingly. This corresponds to the Image Adjustment 1 Contrast setting of the setup menu. Input a value into the box and then click the [Apply] button. This will change the projectors Contrast setting accordingly. Switches the Eco mode.

For details about this setting, see Eco Mode (Power Saving, Low Noise) (page 19). Input a value into the box and then click the [Apply] button. This will change the volume setting accordingly. Specifies the mute setting. Audio is output while Off is selected for this setting, and muted when On is selected. Specifies either output from the projectors speaker output or AUDIO OUT terminal for audio. Speaker: Audio output from the speaker Line: Audio output from the AUDIO OUT terminal Clicking to return all control panel items, except for the Projector status item, to their initial factory defaults. 58 5. After all of the settings are the way you want, click Logout. Note The Status, Setup, Change Password, and Restore Factory Defaults items along the left side of the screen are mainly for accessing information and configuring settings related to projector wireless LAN connection. You can access these items when connected over a wired LAN as well. For details, see System Admin Page Operations and Settings in the Wireless Function Guide on the CD-ROM that comes with the projector. 59 Projector RS-232C Control You can use a commercially available serial cable (cross) to connect the projector to a computer and control the projector from the computer. Connecting the Projector to a Computer Connect the projector to the computer as shown in the illustration below. Projector Serial port (RS-232C) D-Sub 9-pin (female) Computer Commercially available serial cable (cross) Serial port*

D-Sub 9-pin (female)

* A D-Sub 9-pin (male) type connector is standard for computer serial ports, but there may be cases where the shape of a particular computers connector is different. For details about connecting a commercially available serial cable to your computer, see the user documentation that comes with it. Using Control Commands This section explains the commands that are used to control the projector from a computer. Command Send Format Configure your computers serial port with the following settings. Communication Protocol Data Rate 19200bps Data Bit Parity Stop Bit Flow Control 8bit None 1bit None Send this command when you want information about the current setup of the data projector. Send Format

(<command name>?) Read Command Receive Format

(<applicable command setting range>,<current setting>) Command Send Example

( V O L ? ) sent from the computer to the projector. 4

( 0 - 3 0 , 1 5 ) returned from the projector to the computer. Send this command to control the data projector (power on/off, etc.) and to write data to it. Send Format

(<command name><setting value>) Write Command Command Send Example

( V O L 0 ) sent from the computer to the projector. 4 Projector volume setting becomes 0 (mute). 60

See the Command List for details about command names and settings.

All commands use ASCII characters and decimal format integers.

The projector will return a question mark (?) when it is sent a command it cannot recognize. Also, any command that attempts to set a value that is outside the applicable allowable range will be ignored.

If the projector is performing a process initiated by a previously sent command, a projector key operation, or a remote controller key operation, send of the next command must wait until the projector completes the previous process. Command List

Only the following functions are supported while the projector is turned off. Do not try to send any other command to the projector.

Power on/off: Read

Power on: Write

Get light time: Read

Input of a valid signal must be in progress in order to use a command to turn on blank screen or change the aspect ratio. R: Read enabled W: Write enabled Command Name RW Setting Range PWR SRC RW 0: Off, 1: On RW 0: RGB1, 1: Component1, 2: Video, 3: RGB2, 4: Component2, 5: USB, 6: Auto1 (RGB/Component), 7: HDMI, 9: S-video, 10: Auto2 (RGB/Component) Function Power On/Off:

Input Switching: 0: Switches the input source to the COMPUTER 1 terminal and changes the COMPUTER 1 terminal setting to RGB. 1: Switches the input source to COMPUTER 1 terminal and changes the COMPUTER 1 terminal setting to component. 2: Switches the input source to Video. 3: Switches the input source to the COMPUTER 2 terminal and changes the COMPUTER 2 terminal setting to RGB. 4: Switches the input source to COMPUTER 2 terminal and changes the COMPUTER 2 terminal setting to component. 5: Switches the input source to USB. This setting is supported only when the projector is equipped with a USB function and the USB application is running. 6: Switches the input source to COMPUTER 1 terminal and changes the COMPUTER 1 terminal setting to Auto. 7: Switches the input source to HDMI. 9: Switches the input source to S-video. 10: Switches the input source to COMPUTER 2 terminal and changes the COMPUTER 2 terminal setting to Auto. Blank Screen: Switches the blank screen on or off. Volume: Specifies a value to adjust the volume level. This setting is applied to the input source signal that is currently being projected by the projector. BLK VOL RW 0: Off, 1: On RW 0-30 61 Function Color Mode: Selects the color mode. Aspect Ratio: Specifies the aspect ratio. Command Name PST RW Setting Range RW 1: Graphics, 2: Theater, 3: Standard, 4: Blackboard, 5: Game ARZ RW 0: Normal*1, 1: 16:9, 2: Normal*2, 4: Full Get Light Time: Gets the light time from the projector. LMP R 0- Unit: Hours

*1 Input source: RGB or HDMI (PC)

*2 Input source: Video, S-video, component or HDMI (DTV) 62 Specifications Model Name XJ-H1600 XJ-H1650 XJ-H1700 XJ-H1750 XJ-ST145 XJ-ST155 Brightness

(ANSI Lumens) Projection System DLP chip Projection Lens Light Source Terminals 3500 4000 DLP 2500 3000 Size: 0.7 inch, Number of Pixels: XGA (1024 768) 1.2X manual optical zoom, manual focus Manual focus Laser and LED COMPUTER IN: RGB 15-pin mini D-Sub 2 (Also used as component signal input terminal.) MONITOR OUT: RGB 15-pin mini D-Sub 1 VIDEO: RCA pin jack 1 S-video: 4-pin mini DIN 1 HDMI: HDMI type A terminal 1 AUDIO IN: 3.5 stereo mini jack 2, RCA pin jack 2 AUDIO OUT: 3.5 stereo mini jack 1 SERIAL: 9-pin D-Sub 1 USB*: TYPE A terminal 1, TYPE B terminal 1 LAN*: RJ-45 terminal 1 Display Languages English, French, German, Italian, Spanish, Swedish, Portuguese, Turkish, Russian, Chinese (Simplified), Chinese (Traditional), Korean, Japanese

* XJ-H1650/XJ-H1750/XJ-ST145/XJ-ST155 only

CASIO COMPUTER CO., LTD. makes no guarantees concerning the operation or suitability of any USB device that you connect to the projectors USB port.

Specifications are subject to change without notice. D 63 MA1108-D