1 Deiscription of QP3000S Reader:
Power 1 2 3 4 5 6 7 LCD Display LED (Blue) LED (Orange) LED (Green) LED (Red) Landing Zone SAM Card Cover There are several ways to supply power to a QProx reader
By external DC adapter supplying12V/1A through DB9 RS232 connector. By USB port supplying 5V/500mA. Packing List QPROX *1 ADAPTER*1(Optional) USB/RS232 CABLE (Choose one of the cables prior to ordering) 2 Installation 2.1 QP3000S SAM Card Installation Procedures Step1. Unscrew SAM card cover screws Step2. Push SAM card cover upward Step3. Remove SAM card cover Step4. Insert SAM cards into SAM slots Step5. Reinstall SAM card cover and screws back 2.2 Reader Stand Installation Step1. Align and insert a reader stand to the fixture Step2. Push the reader stand upward until hearing holes at the back of a reader a click sound 2.3 Installation Notice Do not place the reader on a metallic surface to avoid interferences 3 LED Indicator There are 4 LED indicators on a QProx. From left to right are blue, orange, green and red color LEDs Status Description of LED Indicators The states of the LED indicators are described below:
After QProx is initialized and ready for transaction, the blue LED will light up. The blue LED indicates the reader is ready for contactless card transactions
The blue and yellow LED indicate that a card has been detected and the transaction process is started.
The blue, yellow and green LED indicate a SUCCESSFUL transaction.
The red LED indicates transaction FAILURE or malfunction. Contactless Card Landing Zone The Land Zone icon is printed on the center of working area, which indicates the correct location to detect user's card. 4 Notice This device complies with Part 15 of FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning:
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.