DCD248R40 WIRELESS DIGITAL CAMERA User Manual

 

WiFi Car DVR User Manual Names of Parts Lens Tripod Mount LCD Panel Mic microSD Card Slot GPS Receiver Slot GPS Receiver (Optional) Micro USB Port Micro HDMI Port Power/Menu/Emergency Button Status Indicator Record Button Speaker

| 1 English Getting Started Inserting a microSD Card Before initial use, insert a microSD card.

(suggested at least 4GB, up to 64GB) Charging the Unit Fully charge camcorder for initial use by:

Car charger PC USB port USB adapter (not included) During charging, screen shows [

When camcorder is fully charged, the indicator turns off.

] or status indicator flashes in orange. microSD card to turn on camcorder. to start recording. to enter menu settings.

] to play the video and press [Stop] to stop. Shooting a Video 1. Power on:

Press 2. Record:

Press Press again to stop. 3. Playback:

Press Select [Playback Press [Play 4. Return to preview:

Switch to [

5. Power off:

Press and hold

].

] to return. for 2 seconds. English

| 2 Camcorder Operation In preview, press Button functions indicated above to enter menu settings. to navigate menu

.Use settings. Menu Settings Camcorder has eight menu settings. Advanced settings can be set up via mobile APP. Menu Settings Descriptions Playback Play recorded images Portable Mode Car Mode WiFi Cloud Switch between Portable mode and Car mode Enable/Disable WiFi for wireless connection Enable/Disable internet cloud connection Voice Record Enable/Disable voice recording (car mode only) Auto REC Auto Record 60 SEC OFF Screen Auto Off Enable/Disable auto recording when car engine starts (car mode only) Screen turns off after 60 seconds of non-

operation (car mode only) Factory Settings Reset to factory default settings Note: After 30 seconds of non-operation in menu settings, screen returns to preview.

| 3 English Record Modes Camcorder has two recording modes for different applications:

Portable Mode: Shoot normal videos. Car Mode: Shoot loop and emergency videos. Comparison between modes:

Mode Record type Normal Portable Mode Car Mode Loop Emergency Record trigger Press in preview Car impact Press loop recording during Record duration Unlimited Three min. sections One min. section

(30 seconds before and after the event) Display info. 00:06:36 SD card remaining time 2014/01/01 21:06:36 2013-10-07 21:06:36 Current date & time Note: During loop recording, oldest files are overwritten if microSD card is full. Transfer Files to PC:

1. Connect camcorder to PC via Micro USB cable. 2. Find video at "My computer\Removable Disk\". 3. Copy, move, delete, and playback videos on PC. View Camcorder Screen on TV:

1. Connect camcorder to TV via Micro HDMI cable (not included). 2. Turn on camcorder. 3. Camcorder screen displays on TV simultaneously. English

| 4 Wireless & APP Operation Before inital using wirless connections, download and install APP

[Unieye Drive] from Google Play Store and Apple Store.

[Unieye Drive] has two functions:

(1) Local - Direct control (2) Internet - Internet live view Unieye Drive Local Internet

(1) Local Local Internet Mobile connects to camcorder directly via WiFi for remote control, live view, album management and camcorder setup. Local Mobile Camcorder

(2) Local Internet Internet Mobile connects to cloud server to view live videos uploaded from internet remote camcorder. Internet Mobile Unieye Server AP Wireless Router AP 3G/4G Mobile Wireless Router AP 3G/4G Mobile Hotspot Camcorder

| 5 English LocalFunction Internet Local Before using mobile APP'sLocalfunction, ensure camcorder WiFi is on and camcorder Cloud setting is off. Once WiFi is ready, preview shows camcorder name (R2-xxxxxxxx) for few seconds. Mobile Connects to Camcorder 1. For Android: Turn on [Wi-Fi]. For iOS: Go to [Settings]

Turn on [Wi-Fi] and select the camcorder name. 2. Run [Unieye Drive]. 3. TapLocaland select the camcorder to enterLocalView Page. Tap [

] to scan again if camcorder is not found.

[Wi-Fi]. Note:

Mobile cannot connect to camcorder while camcorder is recording. For first use, password is not required. User can set camcorder password in Setup Page. iOS Settings Local Main Page Local View Page English

| 6 4.Localfunction has three function pages: View, Album and Setup. View Page Items Descriptions Shoot videos and files are saved into camcorder microSD card Shoot videos or Take photos and files are saved into mobile "Album\Unieye Drive\"

For multiple camcorders user :

Enable Quad-View for multiple live view on mobile In Quad-View, select a window for single view. Upside down image Talk to camcorder from mobile Album Page (for camcorder) Folders Descriptions View or delete video files recorded in portable mode View or delete video files recorded in car mode Setup Page (for camcorder) Groups Descriptions Camcorder Settings Edit name, password, format SD card, etc. Edit Email and AP and save in camcorder.

(For internet cloud server connection) Set motion detector, impact sensor, etc. Car DVR Settings Internet Settings Note: In Setup Page, tap [Save] to complete settings to camcorder.

| 7 English Camcorder SD Card Setup When SD card is first-time use or reformatted in camcorder, user should allocate memory for Portable Mode and Car Mode. Go to [Setup]

[ Camcorder Settings]

Adjust slide bar and press [Format]

button to complete SD card setup. Camcorder Internet Setup Before using internet cloud service, Email and AP must be properly set up.

[ Internet Settings]

Edit Email and AP 1. Go to [Setup]

2. Tap [Save] to complete Email & AP settings. Note: AP(Access Point) can be Wireless Router or 3G/4G Mobile Wireless Router or 3G/4G Mobile Hotspot AP AP AP AP AP AP AP AP AP Wireless Router 3G/4G Mobile Wireless Router 3G/4G Mobile Hotspot English

| 8 Local Internet InternetFunction Before using APP'sInternetfunction, ensure camcorder internet setup has been completed. Camcorder Connects to Cloud Server Enable [Cloud server. Connecting status will be shown on screen.

] in camcorder to upload video streaming to cloud Status Descriptions

] and Connection successful. Preview shows [

camcorder ID. Login failed:

Invalid AP name or password Weak WiFi signal or not in WiFi coverage Connection failed:

No internet or cloud server is not accessible Blocked by some firewall Remote Internet Live View 1. Connect mobile to internet (via WiFi, 3G/4G). 2. Run [Unieye Drive] and tapInternet. 3. For adding camcorder or using another mobile, tap [

and password. 4. Tap camcorder ID/name to view internet live videos. Enter the camcorder ID

]

Internet Main Page 9

|

English Troubleshooting Situation Camcorder cannot turn on Camcorder is frozen Camcorder cannot record Camcorder cannot connect to AP or could server Mobile cannot find camcorder Local Mobile cannot watch live view Local Mobile cannot connect to cloud server Internet Mobile cannot watch live view Internet Forget camcorder password Cause/Solution Power is low. Recharge battery button for 5 seconds to Press and hold force shutdown; press again to turn on No microSD card or microSD card is full microSD card cannot be recognized Format microSD card in [Unieye Drive] or replace microSD card Invalid AP name or password Weak WiFi signal or not in WiFi coverage No internet or cloud server is not accessible Blocked by some firewall Camcorder WiFi is disabled or not in WiFi coverage Mobile WiFi is disabled iOS user does not choose camcorder name in Wi-Fi Settings Tap [Refresh] button on [Unieye Driver]

Weak WiFi signal Camcorder is recording Camcorder is occupied by other mobile Check mobile 3G/4G or WiFi internet connection The internet bandwidth is insufficient for camcorder upload or mobile download Enter camcorder menu settings and select

[Factory Settings] to reset English | 10 FCC Regulations:

15.19 (a)(3) This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 15.21 Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. 15.105 (b) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC RF Exposure Compliance (SAR) This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. The exposure standard for wireless devices employs a unit of measurement known as the Specific Absorption Rate (SAR). The SAR limit adopted by the FCC is 1.6W/kg for an uncontrolled environment. Tests for SAR are conducted using standard operating positions accepted by the FCC with the device transmitting at its highest certified power level in all tested frequency bands. The FCC has granted an Equipment Authorization for this device with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. Although the SAR is determined at the highest certified power level, the actual SAR level of the device while operating can be well below the maximum value. This is because the device is designed to operate at multiple power levels so as to use only the poser required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output.