CDD7428UB CAR AUDIO User manual

 

P2 142.5mm P13 16P 210mm 9682CMB4491QB339A 2014-9-13 2014-9-13 2014-9-13 2014-9-13 2014-9-13 2014-9-13 70g 127075006268 CMB4491QB339A, INSTRUCTION MANUAL OWNER'S MANUAL CDD7428UB-OR CDD7428UB-OR 9682CMB4491QB339A.indd 1 2014-9-5 15:06:23 Safety Information Precautions Use only in a 24-volt DC negative-

ground electrical system. Disconnect the vehicle's negative battery terminal while mounting and connecting the unit. When replacing the fuse, be sure to use one with an identical amperage rating. Using a fuse with a higher amperage rating may cause serious damage to the unit. DO NOT attempt to disassemble the unit. Laser beams from the optical pickup are dangerous to the eyes. Make sure that pins or other foreign objects do not get inside the unit, they may cause malfunctions, or create safety hazards such as electrical shock or laser beam exposure. If you have parked the car for a long time in hot or cold weather, wait until the temperature in the car becomes normal before operating the unit. Keep the volume at a level you can hear outside warning sounds (horns sirens, etc.). CD Notes Playing a defective or dusty CD can cause dropouts in sound. Hold CDs as illustrated. Do not touch the unlabeled side. Do not attach any seal, label or data protection sheet to either side of a disc. Do not expose a CD to direct sunlight or excessive heat. Wipe a dirty CD from the center outward with a cleaning cloth. Never use solvents such as benzine or alcohol. This unit cannot play 3-inch ( 8cm ) CDs. NEVER insert a 3-inch CD contained in the adapter or an irregularly shaped CD. The unit may not be able to eject it, resulting n a malfunction. Disc can not have foreign body, the damage caused by the disc with foreign body do not belong to the warranty scope. Before Operation Do not raise the volume level too much, as this will block outside sounds, making driving dangerous. Stop the car before performing any complicated operation. 2 Contents Safety Information........................................2 Contents.........................................................2 Panel Controls...............................................3 Operate guide ..............................................4 Sound setting ..............................................5 System Setting Item List..............................................6 USB MP3/WMA Overview.............................7 Bluetooth Operations.............................8 Electrical Connections................................10 Troubleshooting..........................................11 Specifications..............................................12 FCC Statement..............................................13 CAUTION DO NOT open covers and do not repair yourself. Consult the dealer or an experienced technician for help.

*

In addition to ordinary CDs, this unit can playback CD - R or CD - RW, MP3. Note: The system just support the English and number display , not all kinds letters are compatible with th unit. CDD7428UB-OR 9682CMB4491QB339A.indd 2 2014-9-5 15:06:24 Panel Controls 1. -Disc eject 2. -Rotate to adjust volume.

-Radio: Mute

-CD/MP3: Pause

-Hold it to power off 3.- Band select 4.-1-6 preset

-Automatically search and save station 5.-Channel 1/Play/Stop/Top 6.-Channel 2/SCN 7.-Channel 3/RPT 8.-Channel 4/RDM 9.-Channel 5/FOLDER-

10.-Channel 6/FOLDER+

11. - Display paly time and clock in the CD state.

- the LCD will display the ID3 TAG information recycle: file name/folder name/ID3 TAG/system time in the MP3 state.

- Display PTY info and system time in the Radio state. 12.-Menu select 13.-USB connector 14.-Seek+/Select the next track 15.-Seek-/Select the previous track 16.-Disc slot 17.-SCR button Radio Disc(when disc is in) USB(when USB inserted) AUX IN 18.-Reset hole 19.-Press to select VOL/BAS/TRE/BAL/LOUD/FAD/

AF/TA/PTY, rotate VOL knob to adjust

-RADIO: Rotate to adjust radio tune

-CD /MP3: Rotate to select the previous/next track 20.1-6 preset:

Press to tune in a preset station. Hold for more than 2 seconds to store a desired station. 21. Microphone CDD7428UB-OR 9682CMB4491QB339A.indd 3 2014-9-5 15:06:24 3 Operate Guide Disc Load / Eject Load : Insert the disc into the slot. to eject the disc. Eject: Press Band Mode Press the button to change bands:

FM1 FM2 FM3 AM1 AM2 LW SRC Press the [SRC] button to switch between and select available sources, the mode as follows: TUNER->CD/MP3/USB->AUX

->DAB Auto Memory Store(Radio mode) Press the [PS/AST] button to scan the preset stations 1-6 for 10 seconds each. Hold the [PS/AST] button more than 2 seconds, the strongest available stations will be automatically saved in the memory of preset button 1-6 . Seek Mode Disc/USB playback: Press the

/

to select the next or previous track. Hold the reverse back mode. to enter fast forward or

/

to select BAS/TRE, rotate the [TUNE]

EQ Loud Mode Press the [TUNE] Knob and rotate to select sound effect EQ OFF POP ROCK CLASSIC JAZZ CUSTOM Press the [TUNE] button and press

/

knob to adjust value. Clock Setting Long press the [DISP] button to set the time. On the non time display menu: Press the

[TUNE] knob to enter the time setting state. The hours blinks on the screen, rotate the

[TUNE] knob to set the hours and minutes, for adjusting is ok, press the [TUNE] knob to exit the clock setting. System Setting On the radio source hold the [DISP] to enter the system setup menu, press the to select: TA REG AF C L O C K C T D X / L O 12/24H LOGIC AREA SET, and rotate the [TUNE] to setting. BEEP setting: The beep tone feature allows the selection of an audible beep tone to be heard each time the menu is accessed. SWRC setting: Rotate the [TUNE] knob to select ON or OFF. DX/LO setting: Rotate the [TUNE] knob to select DX or LO. TA RETUN S T / M O N O SWRC SET BEEP

/

CT setting: Rotate the [TUNE] knob to select ON or OFF. REG setting: Rotate the [TUNE] knob to select ON or OFF. AF setting: Rotate the [TUNE] knob to select ON or OFF. TA RETUN setting: Rotate the [TUNE] knob to select RETUNE S or L. Setting for L, Auto search the TA time space for 180 sec,Setting for S, auto search the TA time space for 45 sec. TA setting: Rotate [TUNE] knob to select ON or OFF. AREA SEL setting: Rotate the [TUNE] knob to select USA, EUROPE, NORTH AFRICA, ASIA, JAPAN. LOGIC ON/OFF: Logic ON to limit the use of the set to one hour when the car ignition is switched off. Logic OFF to prevent the set from turning on when the car ignition is switched off. SCROLL setting(CD SRC): Rotate the [TUNE]

knob to select ON or OFF. MIC SEL setting(Bluetooth SRC): Rotate the [TUNE] knob to to choose Microphone EXTERNAL or INTERNAL. AUTO CON(Bluetooth SRC): To link incoming calls automatically. MP3 Track Search CD/MP3 mode:

Press the [MENU] button to select TRACK SCH mode, and press the [TUNE] knob to enter searching mode. Then rotate and press the [TUNE] knob to select a track number which CDD7428UB-OR 9682CMB4491QB339A.indd 4 2014-9-5 15:06:25 4 Operate Guide you want, then press the [TUNE] knob to confirm. RDS(PTY SEEK) Only the radio region is Europe and on the FM the PTY can be seached. Press the [MENU]

button to PTY function, rotate the [TUNE] knob to display the program types, and press [TUNE]

to select the desired. Note: If radio region isnt Europe, RDS and DAB FMLK wont display. Sound Setting Press the [TUNE] knob to enter sound effect setting mode. First press shows current EQ. Rotate the [TUNE] knob to changes BEAT EQ in this order:

EQ OFF -> POP -> ROCK -> CLASSIC ->

JAZZ -> CUSTOM Rotate the [TUNE] knob to select CUSTOM, and press the knob, then press the button to select: BAS-G -> TRE-G, rotate the knob to select a value. BAS-G / TRE-G: (-7)- (+7) Press the [TUNE] button, and press button to select USER preset:

BALANCE -> FADER -> LOUD, rotate the

[TUNE] knob to select a value. BALANCE: LEFT 1-7->CENTER->RIGHT 1-7 FADER: FRONT 1-7->CENTER->REAR 1-7 LOUD: ON/OFF

/

/

CDD7428UB-OR 9682CMB4491QB339A.indd 5 2014-9-5 15:06:25 5 System Setting Item List Radio source DAB source CD source BT source Radio region: Europe SETUP SETUP SETUP SETUP TA ON OFF TA RETUN RETUNE L RETUNE S AF REG CT DX/LO ON ON ON DX OFF OFF OFF LO ST/MONO STEREO MONO CLOCK _ _:00 00:_ _ 12/24H 24HOURS 12HOURS BEEP SWRC SET LOGIC ON ON ON OFF OFF OFF TA DAB FMLK DAB LBND ON ON ON OFF OFF OFF DAB ANT ACTIVE PASSIVE CLOCK _ _:00 00:_ _ 12/24H 24HOURS 12HOURS BEEP SWRC SET LOGIC ON ON ON OFF OFF OFF TA SCROLL ON ON OFF OFF CLOCK _ _:00 00:_ _ 12/24H 24HOURS 12HOURS BEEP SWRC SET LOGIC ON ON ON OFF OFF OFF TA ON OFF MIC SEL INTERNAL EXTERNAL AUTO CON ON CLOCK _ _:00 OFF 00:_ _ 12/24H 24HOURS 12HOURS BEEP SWRC SET LOGIC ON ON ON OFF OFF OFF AREA SET USA EUROPE NORTH AFRICA ASIA JAPAN Radio source DAB source CD source BT source Radio region: USA/Asia/Japan SETUP SETUP SETUP SETUP DX/LO DX LO ST/MONO STEREO MONO CLOCK _ _:00 00:_ _ 12/24H 24HOURS 12HOURS BEEP SWRC SET LOGIC ON ON ON OFF OFF OFF AREA SET USA EUROPE NORTH AFRICA ASIA JAPAN DAB LBND ON OFF DAB ANT ACTIVE PASSIVE CLOCK _ _:00 00:_ _ 12/24H 24HOURS 12HOURS BEEP SWRC SET LOGIC ON ON ON OFF OFF OFF SCROLL CLOCK ON _ _:00 OFF 00:_ _ 12/24H 24HOURS 12HOURS BEEP SWRC SET LOGIC ON ON ON OFF OFF OFF MIC SEL INTERNAL EXTERNAL AUTO CON ON CLOCK _ _:00 OFF 00:_ _ 12/24H 24HOURS 12HOURS BEEP SWRC SET LOGIC ON ON ON OFF OFF OFF CDD7428UB-OR 9682CMB4491QB339A.indd 6 2014-9-5 15:06:26 6 USB MP3/WMA Overview Note on MP3 MP3 is short for MPEG Audio Layer 3 and refers to an audio compression technology standard. This product allows playback of MP3 files on CD-ROM, CD-R or CD-RW discs. The unit can read MP3 files written in the format compliant with ISO 9660. However it does not support the MP3 data written by the method of packet write. The unit can not read an MP3 file that has a file extension other than ".mp3". If you play a non-MP3 file that has the

.mp3" extension, you may hear some noise. In this manual, we refer to what are called

"MP3 file" and "folder " in PC terminology as "track" and "Album," respectively. Maximum number of directory level is 8, including the root directory. Maximum number of files and folders per disc is 256. The unit may not play tracks in the order of Track numbers. The unit plays only the audio tracks if a disc contains both audio tracks and MP3 files. When playing a disc of 8kbps or VBR*, the elapsed playing time in the display window will not be correct and also the intro play may not function properly. *VBR: Variable Bit Rate In this case, data may not be reproduced correctly. High quality CD-R or CD-RW disc is recommended. Up to 16 characters are displayed for the name of an Album or a Track. ID3 TAG version 1.x is required. Note that the unit may not play Track in the order that you wrote them to the disc. USB Notes USB functions (flash memory type) MP3 music play.

(1) USB flash memory 2 in 1 support

(2) FAT 12/FAT 16/FAT 32 format supported.

(3) File name: 64 byte/dir name: 64 byte/tag name: 30 byte.

(4) Tag (id3 tag ver 2.0)

- title/artist/album: 32 byte support.

(5) USB 1.1 support, USB 2.0 support (For 2.0, speed performance is as USB 1.1)

(6) Not all USB devices are compatible with the unit.

(7) USB connector is support maximum work power with 500mA. Note on creating your own CD-Rs or CD-RWs containing MP3 files T o e n j o y h i g h q u a l i t y s o u n d , w e recommend converting to MP3 files with a sampling frequency of 44.1 kHz and a fixed bit rate of 128 kbps. DO NOT store more than 256 MP3 files per disc. For ISO 9660 -compliant format, the maximum allowable depth of nested folders is 8, including the root directory

(folder). When CD-R disc is used, playback is possible only for discs which have been finalized. Make sure that when MP3 CD-R or CD-

RW is burned that it is formatted as a data disc and NOT as an audio disc. You should not write non-MP3 files or unneeded folders along with MP3 files on the disc otherwise it takes a long time until the unit starts to play MP3 files. With some CD-R or CD-RW media, data may not be properly written depending on their manufacturing quality. CDD7428UB-OR 9682CMB4491QB339A.indd 7 2014-9-5 15:06:26 7 Bluetooth Operations The Bluetooth allows you to utilize your cars built-in audio system for wireless mobile phone or music handsfree communication. Some Bluetooth mobile phones have the audio features, and some portable audio players support Bluetooth feature. This system can play audio data stored in a Bluetooth audio device. The car stereo with Bluetooth will be able to retrieve phonebook contacts, received call, dialed call, missed call, incoming calls, outgoing call and listen to music. Notes:

Do not leave the microphone of Bluetooth handsfree in the places with wind passing such as air outlet of the air conditioner, etc. This may cause a malfunction. If leave it in the places subjected to direct sun, high temperature can cause distortion, d i s c o l o r a t i o n w h i c h m a y r e s u l t i n a malfunction. This system will not operate or may operate improperly with some Bluetooth audio players. Cannot guarantee the compatibility of all mobile phones together with unit. Audio playback will be set to the same volume level as set during telephone call. This might cause problems, if extreme volume level is set during telephone call. Handsfree Operations Pairing 1. Turn on Bluetooth function of your mobile phone. 2. Enter mobile phones Bluetooth setup menu. 3. Search for new Bluetooth devices. 4. Select Bluetooth devices from the pairing list on the mobile phone. 5. Enter 1234 as the password (The password default setting is 1234 ). 6. After pairing successfully, BT and HPF icons A2DP icon wil l light up after A2D P will light up. connected. Making a call Operation from Bluetooth menu Press the [SRC] button to switch the source to BT MUSIC. When display "A2DP" press the [MENU /

] button to to switch to DIAL NUM. Dial Number 1. Press the [TUNE] knob on the front panel to confirm to dial number. 2. Rotate the [TUNE] knob to select a number, press the knob to confirm, and continue to input the next digit. Repeat above until all numbers inputted. 3. Press the [BAND /

4. Press the [MENU /

] button to terminate

] button to dial. call. Dialled/Missed/ Received You can search any Dialled/Missed/Received. 8 1. Rotate the [TUNE] knob to select DIALLED , MISSED , RECEIVED. 2. Press the [TUNE] knob to enter the selected call history. 3. Rotate the [TUNE] knob to scroll the contacts. 4. When the contact name or mobile phone No.

] button to is displayed, press the [BAND /

call the mobile phone No. of that contact.

* Press the [MENU/

] button to end the call. Call from Phonebook User can search the contact name in the phonebook and make call. 1. Rotate the [TUNE] knob to select USER 2. Press the [TUNE] knob to enter the selected PBK . phonebook. 3. Rotate the [TUNE] knob to scroll the contacts. 4. The phone number and the name to scroll display.When the contact name is displayed,

] knob to call the mobile press the [BAND /

phone No. of that contact.

* Press the [MENU /

] button to end the call. Note:

Some mobile phones may not be able to transfer data of Phonebook. Transfer Call You can switch handsfree call and mobile phone call. CDD7428UB-OR 9682CMB4491QB339A.indd 8 2014-9-5 15:06:27 Bluetooth Operations

] button during call. Press the [BAND /

Answering a call You can answer an incoming call by pressing the [BAND /

* Press the [MENU /

] button to reject an

] button. incoming call. Audio Streaming Operations What is audio streaming?

Audio streaming is a technique for transferring audio data such that it can be processed as a steady and continuous stream. Users can stream music from their external audio player to their car stereo wirelessly and listen to the tracks through the cars speakers. Please consult your nearest dealer for more information on the product of wireless audio streaming transmitter offered. CAUTION Please avoid operating your connected mobile phone while audio streaming as this may cause noise or sound choppy on the song playback. Audio streaming may or may not resume after telephone interrupt as this is dependent on mobile phone. System will always return to Radio mode if audio streaming is disconnected. Note:

Be sure to read the chapter Pairing before proceeding. Play / Pause a track 1. Push the [ 1 ] button to pause audio 2. To resume audio playback, push the [ 1 ]

playback. button again. Selecting a track Track-up Press the beginning of the next track. button to move to the Track-down Press the beginning of the previous track. button to move to the Note:

Playing order will depend on Bluetooth audio player. When the button is pressed, some A2DP devices will restart the current track depends on the duration of playback. During music streaming playback, A2DP and HFP will be shown on the display. When A2DP device is disconnected, DISCONN will be shown on the display Some Bluetooth audio players may not have play / pause synchronized with this unit. Please make sure both device and main unit are in the same play / pause status in BT MUSIC mode. 9 CDD7428UB-OR 9682CMB4491QB339A.indd 9 2014-9-5 15:06:27 Troubleshooting If you suspect something is wrong, immediately switch power off. Do not use the unit in abnormal condition, for example without sound, or with smoke or foul smell, can cause fire or electric shock. Immediately stop using it and call the store where you purchased it. Never try to repair the unit yourself because it is dangerous to do so. Option General Function Selectable values No power or no sound Car's engine switch is not on Fuse is burnt Volume is too low If the above solutions cannot help Turn your car's key to ACC or ON Replace fuse Check volume or mute on / off Press the RESET button Disc Disc is inside but is no sound Disc is upside down Disc is dirty or damaged Disc sound is skips,tone quality is low Disc is dirty or damaged Radio Much noise in broadcasts Preset station lost Error Display Messages Station is too far, or signals are too weak Battery cable is not correctly connected Place disc in the correct direction, and the label side up Clean disc or change another disc Clean CD or change another CD Select other stations of higher signal level Connect the battery cable to the terminal that is always live. Disc is upside down Disc format is not support or file date is wrong check the disc Place disc in the correct direction, and the label side up CD ERR Disc is wrong Press case that the disc cannot be ejected by pressing press the RESET switch and press the to eject the disc. If still not ejecting, consult your dealer. button more than 2 seconds to eject the disc. In button, button 2 seconds Note: If the set inserts a non-standard size disc or card.you may long press the button for 5 second,then it will be eiected forcibly. CDD7428UB-OR 9682CMB4491QB339A.indd 11 2014-9-5 15:06:28 11 Specifications General Power supply:

Maximum audio power output:

Suitable speaker impedance: 4 ESP:

Dimensions(WxDxH):

Weight:

24V DC negative ground 15Wx4 channels (4

) 10s(CD-DA)/40s (MP3) 178X161X50mm 1.33kg Note: For different bit-rate MP3, ESP time are different;

40 seconds only for the bit-rate MP3 file of the 128Kbps FM Stereo Radio Frequency range:

Usable sensitivity:

Frequency response:

Stereo separation:

Image response ratio:

IF response ratio:

Signal/noise ratio:

87.5 - 108.0MHz 14dB 50Hz-10KHz 22dB (1KHz) 40dB 60dB 50dB AM(MW) Radio Frequency range:

Usable sensitivity(S/N=20dB): 35dB 522-1620KHz Disc Player System:

Frequency response:

Signal/noise ratio:

Total harmonic distortion:

Channel separation:

Disc digital audio system 20Hz - 20KHz

> 72dB(dBA) Less than 1% (1KHz)

> 55dB 531- 1602KHz 153 - 252KHz NORTH AFRICA JAPAN Depending on country, the change from a standard to another (DAB, or DAB+ or FM) shall be transparent to the user. Digital (DAB) Radio Frequency range:

Usable sensitivity (RF=-72 dBM):

Frequency response:

Stereo separation:

Signal/noise ratio:

DAB Band III: 174.928MHz ~ 239.200MHz DAB Band L:1452.960MHz ~ 1490.624MHz

-95dBM 20hz-20khz 50db 60db Min Item Far off selectivity:

42dB Adjacent channel rejection: 35dB Max 60dB 40dB Note: Specifications and the design are subject to change without notice due to improvements in technology. 12 CDD7428UB-OR 9682CMB4491QB339A.indd 12 2014-9-5 15:06:29 FCC Statement 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference.

(2) This device must accept any interference received, including i n t e r f e r e n c e t h a t m a y c a u s e undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate FCC Statement the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

. Reorient or relocate the receiving antenna.

. Increase the separation between the equipment and receiver.

. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

. C o n s u l t t h e d e a l e r o r a n experienced radio/TV technician for help. 13 CDD7428UB-OR 9682CMB4491QB339A.indd 13 2014-9-5 15:06:29 CDD7428UB-OR 9682CMB4491QB339A.indd 14 2014-9-5 15:06:29 P/N:127075006268