TRD7412UBA Car Radio User Manual

 

RADIO / USB MP3 / WMA / DAB+ / DMB / Bluetooth 12V OWNERS MANUAL Before operation

(cid:1) Do not raise the volume level too high. Keep the volume at a level at which you can hear outside warning sounds (horns sirens, etc.).

(cid:1) Stop the vehicle before performing any complicated operations. Caution

(cid:1) Do not open the cover and do not repair by yourself. Ask your authorised dealer for help. Note:

1. According to models with different wiring harness to connect the definition of the specific content, please refer to the model label. 2. Specifications and the design are subject to change without notice due to improvements in technology. Contents 2 Safety Information ........................................ 2 Panel Controls ............................................... 3 General Operation...................................... .. 4 Volume and Sound ........................................ 5 AM/FM Radio ............................................. 6 DAB Radio (applicable to DAB feature)................. 7 USB/MP3/WMA............................................. 8 Bluetooth............................................... 9 Dimming.............................................11 System Settings Items List ...............................12 Electrical connections...................................14 Troubleshooting............................................15 Specifications................................................16 Declaration of Conformity.......................17 FCC ................................................................18 Accessories....................................................19 Safety Information Thank you for purchasing this product, please read the manual carefully before operating, and reserve it for future reference. Precaution

(cid:1) Use only in a 12-volt DC negative- ground electrical system.

(cid:1) Disconnect the vehicle's negative battery terminal while mounting and connecting the unit.

(cid:1) When replacing the fuse, be sure to use one with an identical amperage rating.

(cid:1) Using a fuse with a higher amperage rating may cause serious damage to the unit.

(cid:1) Make sure that pins or obstacles do not get inside the unit, they may cause malfunctions, or create safety hazards such as electrical shock.

(cid:1) If you have parked the vehicle for a long time in hot or cold weather, wait until the temperature in the vehicle becomes normal before operating the unit. Panel Controls 3

(1) Microphone

(6) Display button

(2) Power button

- On/Off

- Mute

- Rotate the VOL knob to adjust volume

(long press)

(short press)

- Display System clock,

- Display PTY Information in Radio mode

- Display MP3 Information (USB Mode)

(7) << Button Previous Station/Previous Track

(3) Source Button

- Select Source

- Select PTY Mode

(4) Band /AST Button

(short press)

(long press)

(8) >> Button Next Station/Next Track

(9) USB slot

- Band select

- Auto store/DAB Service Scan

(short press)

(long press)

(applicable to DAB feature).

(10 15) AM/FM, DAB Favorites

(applicable to DAB feature)

(5) Select Button

- Manual and Automatic Equalizing

- Select Menu entry in user Menu

(10)

(11)

(12)

(13)

(14)

(15)

(16) MP3 folder ahead Phone: Hang up MP3 folder back Phone: Contact mode/Dial/Call transfer MP3 Random play MP3 repeat play Program intro Play (Scan) MP3/Bluetooth Play/Pause Front auxiliary input General Operation Power ON/OFF , Mute To Switch on the Radio push the Power ON/OFF button. To switch off the Radio push the Power ON/OFF button for more than 2 sec. The Radio will be muted by pushing the Power ON/OFF button for less that 2 sec. Ignition Logic With ignition logic activated (Default setting) the Radio can be switched on and off manually even if the vehicles ignition pin is not connected. To avoid battery discharge the radio is switched off after 1h without user operation. System Settings The system settings menu is entered by long pressing the [DISP] button. To access the available menu entries push the search buttons [ << />> ]. To select the available options of each menu entry rotate the [VOL] knob. For details see chapter system settings of this manual. Select Source Press the [SRC] button to switch between and select available sources: TUNER->USB->AUX F-

>AUX R-> Bluetooth->DAB (applicable to DAB feature). USB and Bluetooth is only visible in the menu when connected. Reception Area This Radio is designed to work in different regions with different frequency ranges. The Reception area can be adjusted via the System Settings menu. The default setting is EUROPE. The following Areas are available:

EUROPE/ASIA/JAPAN/NORTH AFRICA/USA Clock Setting The clock time can be adjust manually by long pressing the [DISP] button to set the time. Select [CLOCK] with the search buttons [ << />> ]. Press [SEL] button and rotate [VOL] knob to adjust the minutes. Press search buttons [ << />> ] to select adjust hours. Rotate [VOL] knob to adjust the hours. Press the [SEL] button to exit the clock setting. 4 Volume and Sound Volume To adjust the Volume rotate the [VOL] knob Predefined sound effects The Radio provides different predefined sound effects . Press the [SEL] button to enter the Sound settings menu. Rotate the [VOL] knob to select one of the following options: EQ OFF -> POP

-> ROCK -> CLASSIC -> JAZZ -> CUSTOM. BALANCE, FADE and Loudness To adjust Balance, Fader and Loudness press the [SEL] button and then push [ << / >> ]

button to select BALANCE -> FADER -> LOUDNESS. Rotate the [VOL] knob to adjust Balance, Fade and Loudness according your needs. Manual Sound Adjustment For manual sound adjustment first select CUSTOM. Push the [SEL] button again and then select BASS or TREBLE with the [ << / >> ] button. Rotate the [VOL] knob to adjust BASS and TREBLE according your needs. AM/FM Radio AM/FM Radio Selection To access AM/FM Radio press the [SRC] button and select Tuner Select Band Press the [ BAND ] Button to select one of the available Radio Bands. The Radio bands will be changed in the following order:

FM1 -> FM2 -> FM3 -> AM1 -> AM2 -> LW The AM and LW Bands can be deactivated by the user via the system settings menu. Automatic Tuning For Automatic tuning press the [ << / >> ] button. The Radio will search and select the next receivable station. When Traffic Announcement is activated (TA =

ON) only stations that broadcast Traffic announcements will be tuned. Manual Tuning For manual station selection press the [ << / >> ]

button for longer than 2 sec. MANUAL is shown in the display. Pressing the [ << / >> ] button again the frequency will be incrementally increased/decreased. Manual Storing Favourites There are 3 FM , 2 MW and 1 LW Favourite banks available. Select the favourite bank where to store the station and tune the station that shall be stored. Push the preset button longer than 2 sec .to store the station Recall Stored Favourites To recall a stored favourite push the according preset button Auto Memory Store To search for the best receivable stations and store them as favourite press the (BAND/AST] button for 2 sec. The Radio searches the best receivable station and stores them. 5 RDS Many FM Stations in Europe transmit RDS data

(Radio Data System) in addition to their audio program. With RDS the user has the following benefits:

(cid:1)The best audible frequency (AF) of a selected station is tuned automatically for best reception quality. To enable automatic selection of best audible frequency select AF=ON in the Settings menu

(cid:1) The Radio recognizes Traffic Announcements and can switch to Radio even if an other Audio source is selected. To enable automatic Traffic announcement select TA=ON in the Settings menu

(cid:1) Some Stations provide regional specific programs. With the regional (REG) function only those frequencies are followed that broadcast the selected regional program. To follow regional programs select REG=ON in the Settings menu

(cid:1) The stations name can be displayed For further settings see System Menu PTY Via the RDS System FM stations in many countries transmit the type of program (Program Type , PTY) that is broadcasted. To search for a desired Program type push [SRC] for about 2 sec. and select the Program type by rotating the[VOL] knob. The Radio will search for a Radio-Program with the selected Program type when the [SEL] button is pushed. PTY SEEK is shown in the Display. If no station with the selected Program Type can be found the last tuned station will be selected and NO PTY is shown in the Display. The following program types are available:

NEWS, AFFAIRS, INFO, SPORT, EDUCATE, DRAMA, CULTURE, SCIENCE, VARIED, POP-M, ROCK-M, EASY-M, LIGHT-M, CLASSICS-M , O T H E R-M , W E AT H E R, F I N A N C E , CHILDREN, SOCIAL, RELIGION, PHONE IN, TRAVEL, LEISURE, JAZZ, COUNTRY, NATIONAL-M , OLDIE S, FO L K- M , D O C U M E NT, T E S T, ALARM DAB Radio

(applicable to DAB feature) 6 DAB Radio Selection DAB/DAB+ Provides radio programs in digital sound quality. DAB Service List To get an overview of receivable DAB services a DAB Service List can be displayed. To access Digital Audio Broadcast (DAB) press the

[SRC] button and select DAB. Push [SEL] for 2 sec. to open the DAB Service List. Rotate the [VOL] Button to scroll through the list of receivable stations. DAB Service SCAN To search for receivable DAB Services the DAB service SCAN has to be started by pushing

[BAND/AST] for 2 sec. SCAN is shown in the display. Select DAB Band Press the [ BAND ] Button to select one of the available DAB Bands. The DAB bands will be changed in the following order:

DAB1 -> DAB2 -> DAB3 Tuning a DAB Service To tune a DAB service push [<< / >> ] to select the next/previous DAB service. Tuning is shown on the Display. To tune a DAB service push [SEL]. Tuning is shown on the display. In the case that a Service is temporary not receivable No Service will be shown on the display. Storing DAB Favourites There are 3 DAB favourite banks available. Select the favourite bank where to store the station and tune the station that shall be stored. Push the preset button longer than 2 sec .to store the station Recall Stored Favourites To recall a stored favourite push the according preset button Switching between DAB and FM When the DAB signal quality drops significant it is reasonable to switch and listen to the service via FM. Switching between DAB and FM (DABFMLNK) can be disabled via the system settings menu USB/MP3/WMA Note on MP3 MP3 is short for MPEG Audio Layer 3 and refers to an audio compression technology standard. This product allows playback of MP3 files. The unit can not read an MP3 file that has a file extension other than ".mp3". If you play a non-MP3 file that has the .mp3"

extension, you may hear some noise. In this manual, we refer to what are called "MP3 file" and "folder " in PC terminology as "track" and

"Album," respectively. Maximum number of directory and files is 65535, including the root directory. Maximum number of files per folder is 1000. The unit may not play tracks in the order of Track numbers. Supports bit rate from 8 to 320 kbps and VBR

(Variable Bit Rate). Note on WMA Supports bit rate from 5 to 384 kbps and VBR

(Variable Bit Rate). USB Notes USB functions (flash memory type) MP3 music play.

(cid:1) USB flash memory 2 in 1 support

(cid:1)FAT 12/FAT 16/FAT 32 format supported.

(cid:1)File name: 64 byte/dir name: 64 byte/tag name: 30 byte.

(cid:1)Tag (id3 tag ver 2.0)

- title/artist/album: 32 byte support.

(cid:1) USB 1.1 support, USB 2.0 support

(For 2.0, speed performance is as USB 1.1)

(cid:1) Not all USB devices are compatible with the unit.

(cid:1) USB connector is support maximum work power with 500 mA. Loading/ Removal of USB Device Insert a USB device into the USB-slot Reading is shown on the Display. MP3 Playback will start immediate afterwards. Before removing the USB Device switch to an other Source by pushing the [SRC] button. 7 MP3 Playback/Pause To pause and resume MP3 Playback push button

[1>]. Next/Previous MP3 Track. To select the next/previous track push the [<</>>]

button. Fast forward/fast rewind. To fast forward/fast rewind the current track push the [<</>>] button longer than 2 sec. Random Play To activate random play push the button [4 RND]. Repeat Push the [3 RPT] button to activate repeat Track/repeat directory/repeat all. SCAN To activate/stop the scan function push the button

[2 SCN]. In scan mode all titles are played for 10 sec. 8 Transfer Call You can switch between hands free call and mobile phone call. Press the [5 /] button during call. Answering a call You can answer an incoming call by pressing the

[5/] button. Press the [6 /] button to reject an incoming call. Bluetooth The Bluetooth allows you to utilize your vehicles built-in audio system for wireless mobile phone or music hands free communication. Some Bluetooth mobile phones have the audio features, and some portable audio players support Bluetooth feature. This system can play audio data stored in a Bluetooth audio device. The vehicle stereo with Bluetooth will be able to retrieve phonebook contacts, received call, dialed call, missed call, incoming calls, outgoing call and listen to music. Notes:

Do not leave the microphone on Bluetooth hands free in the places with wind passing such as air outlet of the air conditioner, etc. This may cause a malfunction. If left in places subjected to direct sun, high temperature can cause distortion, discoloration which may result in a malfunction. This system will not operate or may operate improperly with some Bluetooth audio players. Cannot guarantee the compatibility of all mobile phones together with unit. Audio playback will be set to the same volume level as set during telephone call. This might cause problems, if extreme volume level is set during telephone call. Hands free Operations Pairing 1.Turn on Bluetooth function of your mobile phone. 2.Enter mobile phones Bluetooth setup menu. 3.Search for new Bluetooth devices. 4.Select Bluetooth devices from the pairing list on the mobile phone. 5.Enter 1234 as the password ( The password default setting is 1234 ). 6.After pairing successfully, BT and HPF icons will light up. A2DP icon will light up after A2DP connected Dial Number 1. Phone dialing Mobile phone dialing, LCD screen displays dialing information. 2. Unit dialing Press [SRC] button swicth to BT /Audio mode press [5 D+] to choose the DIAL ON function, press

[SEL] button / [<</>>] button and rotate the knob to input dialing numbers, Audio Streaming 9 What is audio streaming?

Audio streaming is a technique for transferring audio data such that it can be processed as a steady and continuous stream. Users can stream music from their external audio player to their vehicle stereo wirelessly and listen to the tracks through the vehicle s speakers. Please consult your nearest dealer for more information on the product of wireless audio streaming transmitter offered. BT /Audio mode (A2DP) Playback/Pause To pause and resume Playback push button [1>]. Next/Previous Track. To select the next/previous track push the [<</>>]

button. Note:

Playing order will depend on Bluetooth audio player. When the [<</>>] button is pressed, some A2DP devices will restart the current track depends on the duration of playback. During music streaming playback, A2DP and HFP will be shown on the display. When A2DP device is disconnected, DISCONN will be shown on the display Some Bluetooth audio players may not have play / pause synchronized with this unit. Please make sure both device and main unit are in the same play/ pause status in BT /Audio mode. Please avoid operating your connected mobile phone while audio streaming as this may cause noise or sound choppy on the song playback. Audio streaming may or may not resume after telephone interrupt as this is dependent on mobile phone. The system will always return to Radio mode if audio streaming is disconnected. Note:

Be sure to read the chapter Pairing before proceeding. Dimming 10 Display and Button Dimming Brightness adjustment Manual Mode This radio allows manual or automatic dimming. Select DIMMING in the settings menu and select one of the following options:

(cid:1) Select OFF to disable Dimming

(cid:1) Select Manual dimming when the radio is not connected to the vehicles ignition pin.

(cid:1) Select Automatic dimming when the Radio is connected correct to the vehicles ignition-pin. To adjust your favourite brightness-setting for display- and button brightness select manual mode. Select Manual dimming to adjust Brightness of Display and Buttons Change between Day and Night Mode by selecting DIMDAY or DIMNIGHT Automatic Mode In automatic mode the display will change automatically between day and night mode when the radio is correct connected to the vehicles illumination pin. DAY/Night Selection Select DIM MAN and change between day mode and night mode by selecting DIMDAY or DIMNIGHT Night Brightness adjustment of display and Buttons To adjust Night Brightness of the display and buttons select DIMNIGHT. Then select LCD Menu and adjust the brightness of the Display accordingly. Then select Key Menu and adjust the brightness of the Buttons accordingly. Day Brightness adjustment of display and Buttons To adjust Day Brightness of the display and buttons select DIMDAY. Then select LCD Menu and adjust the brightness of the Display accordingly. Then select Key Menu and adjust the brightness of the Buttons accordingly System Setting Item List 11 Tuner source Radio region: Europe DAB source

(applicable to DAB feature) AUX/ USB / BT (A2DP) source System Setting Item List 12 Radio region: Asia/ Japan/ N Africa/ USA Tuner source DAB source

(applicable to DAB feature) AUX/ USB / BT (A2DP) source System Setting AM/FM Tuner Options TA Enable /Disable automatic switching to FM-tuner mode in case of incoming Traffic announcements. TA Return Switch back time in the case that Announcement-

Signal can not be detected any more. AF Enable/Disable automatic selection of best audible frequency in FM-Tuner Mode (RDS). REG Enable/Disable automatic selection of better audible frequencies that broadcast different regional content. CT Automatic synchronization of Clock with time received via RDS-Signal. DX/LO Search Level of AM/FM-Tuner. ST/Mono Selection of Stereo or Mono output of FM/AM tuner AERA SEL To adjust the AM/FM tuner to your region. 13 Dimming Options DIMMING To Select Dimming Mode (OFF, Manual, automatic) LCD Menu To Adjust Display brightness KEY Menu To adjust Button brightness DIM MAN To switch between DAY and Night Mode Others MW To enable/disable MW Reception LW To enable/disable LW Reception BEEP To enable/disable confirmation signal Logic To enable/disable ignition logic Clock To adjust hours and minutes 12/24H To select 12 / 24 h Clock format DAB Tuner Options

(applicable to DAB feature) DAB FMLINK Enable /Disable automatic switching to FM-tuner when DAB-Signal drops. DAB LBND Enable/Disable L-Band Decoding DAB ANT Selection of Active or Passive antenna is connected. DLS SCROLL Enable display of Artist and Song Bluetooth Options SCROLL ON: Display ID3 tag information cyclic: Track-

Folder-File-Album-Title-Artist-Track OFF: Display Track MIC SEL Use of integrated Microphone in front panel or external Microphone connected by rear connector AUTO CON To disable/enable Bluetooth connection Steering Wheel Control Options SWRC TYPE Selection of Steering Wheel control type

(Resistance/PWM) SWRC SET To enable/disable steering wheel control Electrical Connections Wiring Diagram DAB SMB connector

(applicable to DAB feature) AM/FM ISO connector 14 Pin No Note Pin No Note 3 4 5 6 7 8 21 22 23 24 31 Telephone mute low Ignition Antenna Remote Illumination Battery+

Power Ground SWRC+

SWRC GND Left AUX Input AUX Shield GND Mic+

9 10 11 12 13 14 15 16 25 26 32 Rear R+

Rear R-

Front R+

Front R-

Front L+

Front L-

Rear L+

Rear L-

AUX GND Right AUX Input Mic-

Trouble Shooting The following checklist can help you solve some problems which you may encounter when using the unit. Before consulting it, check the connections and follow the instructions in the user manual. Do not use the unit in abnormal condition, for example without sound, or with smoke or foul smell can cause fire or electric shock, immediately stop using it and call the store where you purchased it. 15 Problem General The unit will not switch on. No sound The unit or screen does not work normally. Mode TUNER Unable to receive stations. Poor quality reception of radio station. Mode USB Unable to insert USB device The USB device cannot be read. Possible cause Solution vehicle ignition is not on. Cable is not properly connected. Fuse is burnt. Volume is set at minimum or the mute function is on. The unit system is unstable. Turn your vehicle key in the ignition. Check cable connection. Replace fuse with a new fuse of the same capacity. Check the volume or switch the mute function off. Press the RESET button. The antenna is not connected properly. Connect the antenna properly. The antenna is not fully extended or it is broken. Fully extend the antenna and if broken, replace it with a new one. The USB device has been inserted the wrong way around. Insert it the other way around. NTFS format is not supported. Check that the file system is in FAT or FAT32 format. Due to different formats, some models of storage devices or MP3 players may not be read. Specifications General Power supply :

12-volt DC or a 24-volt DC negative ground according to the right radio variant. (Refer to variants table) Maximum power output:

41 W x 4 channels (4 ) for 12-volt variant Suitable speaker impedance:

Dimensions (W x D x H):

Weight:

4 188 x 114.7 x 58.5 mm 0.9Kg Note: for different bit-rate MP3, ESP time are different;

40 seconds only for bit-rate MP3 file of 128Kbps FM Stereo Radio Frequency range:

Usable sensitivity:

Frequency response:

Stereo separation:

Image response ratio:

IF response ratio:

Signal/noise ratio:

AM/MW) radio Refer to AM/FM Tuner table

< 14 dB 50 Hz 10 KHz 22dB (1KHz) 40dB 60 dB 50dB Frequency range:

Usable sensitivity (S/N = 20 dB):

Refer to AM/FM Tuner table

< 35 dB USB Charging:

0.5A 5V AM/FM tuner BAND American EUROPE*

ASIA Japan LATAM NORTH AFRICA FM AM FM MW LW FM AM FM AM FM AM FM MW LW RECEIVED FREQUENCY 87.5 - 107.9MHz 530 - 1710KHz 87.5 - 108.0MHz 522 - 1620KHz 144 - 288KHz 87.5 - 108.0MHz 522 - 1629KHz 76,0 - 95,0MHz 522 - 1629KHz 76,0 - 107.9MHz 530 - 1710KHz 87.5 - 108.0MHz 531 - 1602KHz 153 - 252KHz

(applicable to DAB feature) 16 CHANNEL SPACE 100KHz 10KHz 50KHz 9KHz 3KHz 50KHz 9KHz 100KHz 9KHz 50KHz 10KHz 50KHz 9KHz 3KHz AUTO SPACE 200KHz 10KHz 100KHz 9KHz 3KHz 50KHz 9KHz 100KHz 9KHz 50KHz 10KHz 100KHz 9KHz 3KHz Note: specifications and the design are subject to change without notice due to improvements in technology Bluetooth Output power Frequency band Range Standard 4 dBm (Class 2) 2.4000 GHz - 2.4835 GHz (ISM Band) 10 meters (free space) Bluetooth 2.0 specification Declaration of Conformity 17 Caterpillar Inc. declares the radio has been so constructed that it complies with basic requirements and other relevant regulations of the European Union directives 2014/53/EU and 2014/35/EU 18 FCC FCC STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

(1) This device may not cause harmful interference. Increase the separation between the equipment and receiver

(2) This device must accept any interference received, including interference that may cause undesired operation. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/ TV technician for help. FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator &

your body.

(3) Changes or modifications not expressly a p p r o v e d b y t h e p a r t y r e s p o n s i b l e f o r compliance could void the user's authority to operate the equipment. NOTE:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or Accessories 19 Metal sleeve Removal Tools Bezel www.parts.cat.com 2017 Caterpillar All Rights Reserved. CAT, CATERPILLAR, their respective logos, Caterpillar Yellow the Power Edge trade dress, as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission. P/N: 127075017331