CM05 TUBULAR MOTOR User Manual -part 1

 

MANUAL CM-05 Li-ion battery powered tube motors with pull and remote operation CM-03 MOTION CM-05 LI-ION TUBULAR MOTOR MOTION CM-05 LI-ION TUBULAR MOTOR CM-05 Li-ion battery powered tube motors with pull and remote operation Motor features Li-ion Battery Integrated lithium-ion battery USB Rechargeable Rechargeable with micro USB Wireless Cable free installation Speed Control Consistent rolling speed Bi-directional Two-way communication for real-time response Control options Pull Control Operate with pull control Remote Control Operate with a remote control App Control Operate with the MOTION app Connectivity Compatible with home and building automation Support Video How to install, program and operate rtube.nl/red980 App Store Download the MOTION app rtube.nl/red981 Google Play Download the MOTION app rtube.nl/red982 WARNING Read the instructions carefully before assembling and using the product. Assembly can be completed by non-

professionals. For indoor use only. Young children can strangle themselves with the loop of pull cords, chains and tapes, and cords that operate window coverings. To avoid strangulation and entanglement, keep cords out of reach of young children. Cleaning Follow these general rules when cleaning the outside of the device and its components:

Use a damp, soft, lint-free cloth. Avoid getting moisture in openings. Do not use aerosol sprays, solvents, alcohol, or abrasives. Service & Support Do not perform repairs yourself. Do not attempt to open the device or disassemble it. You run the risk of electric shock and voiding the limited warranty. No user-serviceable parts are inside. Cords may ensnare a childs neck. Move beds, cots and furniture away from window covering cords. Do not tie cords together. Make sure cords do not twist together and form a loop. Warranty Service First follow the advice in this manual. If the product appears to be damaged or does not function properly, go to your local dealer for instructions on how to obtain warranty service. Recycle This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collec-tion systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling. E n g l i s h MOTION CM-05 LI-ION TUBULAR MOTOR MOTION CM-05 LI-ION TUBULAR MOTOR Reorient or relocate the receiving antenna Increase the distance separating the equipment and receiver Connect the equipment to an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio/TV technician for help EU Declaration Hereby, Coulisse declares that the radio equipment type CM-05 is in compliance whith directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.my.coulisse.com Important Safety instructions WARNING: To reduce the risk of severe injury or death, it is important to follow these instructions for personal safety. Save these instructions. Important Installation instructions WARNING: Important safety instructions. Follow all instructions, since incorrect installation can lead to severe injury. Read and follow all installation instructions. This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children should not play with the appliance. Cleaning and user maintenance should not be performed by children without supervision. Do not allow children to play with fixed controls. Keep remote controls away from children. Frequently examine the installation for imbalance and signs of wear or damage to cables and springs. Do not use if repair or adjustment is necessary. This instruction manual is also available on the website. The drive must be disconnected from its power source during cleaning, maintenance and when replacing parts. The A-weighted emission sound pressure level of the drive is equal to or less than 70dB(A). Indoor and household use only. Disconnect the drive from the power supply or switch off the automatic controls when maintenance, such as window cleaning, is being carried out in the vicinity. When operating a biased switch, make sure that other persons are kept away. Do not operate when maintenance, such as window cleaning, is being carried out in the vicinity. The tube motor must only be supplied with safety extra low voltage corresponding to the marking on the appliance. This appliance contains batteries that are non-

replaceable. This motor can only be used with soft material for driven parts. Hazardous unprotected moving parts of the drive must be installed higher than 2.5m above the floor or any other level surface that could provide access to it. Install the actuating member of a manual release at a height less than 1.8m. The actuating member of a biased switch is to be located within direct sight of the driven part but away from moving parts. It is to be installed at a minimum height of 1.5m and not accessible to the public. The mass and the dimension of the driven part must be compatible with the rated torque and rated operating time. Fixed controls have to be clearly visible after installation. The driven part must be compatible with the rated torque (CM-05 2.0N.m) and rated operating time

(12min). Minimum tube diameter: 28mm. The drive is intended to be installed at a height of at least 2.5m above the floor or any other accessible level surface. All-pole disconnection switches must be incorporated in the fixed wiring in accordance with the wiring rules. The appliance must only be supplied at safety extra low voltage corresponding to the marking on the appliance. Before installing the drive, remove any unnecessary cords or components and disable any equipment not needed for powered operation. The battery must be removed from the appliance before it is scrapped. The appliance must be disconnected from the supply mains when removing the battery. The battery is to be disposed of safely. FCC Manual | FCC ID: ZY4CM05 Regulatory Information 1 FCC Information for User This product does not contain any user serviceable components and is to be used with approved antennas only. Any product changes or modifications will invalidate all applicable regulatory certifications and approvals. 2 FCC Electronic Emission Notices This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference 2. This device must accept any interference received, including interference that may cause undesired operation. 3 FCC Radio Frequency Interference statement This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. Operation of this equipment in a residential area may cause harmful interference, in which case the user will be required to correct the interference at their own expense. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

E E n n g g l l i i s s h h MOTION CM-05 LI-ION TUBULAR MOTOR MOTION CM-05 LI-ION TUBULAR MOTOR Motor CM-05 Application Description Motor diameter Tube compatibility Torque Speed Battery Capacity Power supply Input Cable free Speed control Working temperature Frequency emission power Certificates Tubular motor 28 mm 42-50-65mm 2.0 Nm 28 rpm 2600mAh 31Wh (12V)

-10C~50C 2.32dBm Channels Wall mount Program blinds Single select Channel select Max. blinds Max. scenes Frequency Range Power supply Length Width Height Certificates CM-11 Hand-held remote CM-12 Hand-held remote 1 5 CM-13 Hand-held remote 15 CM-15 Wall remote CM-16 Wall remote CM-17 Table remote CM-18 Pull remote 1 4 4 1

-

-

CM-20 Motion Wi-Fi bridge n/a

-

-

-

-

-

-

-

-

-

-

-

-

-

-

unlimited n/a 433.925 MHz 30 m with 1 concrete wall CR2430 3.0V 120 mm 45 mm 14 mm unlimited n/a 433.925 MHz 30 m with 1 concrete wall CR2430 3.0V 120 mm 45 mm 14 mm unlimited n/a 433.925 MHz 30 m with 1 concrete wall CR2430 3.0V 120 mm 45 mm 14 mm unlimited n/a 433.925 MHz 30 m with 1 concrete wall CR2430 3.0V 66 mm 32,5 mm 13,8 mm unlimited n/a 433.925 MHz 30 m with 1 concrete wall 3 x CR2430 3.0V 86 mm 86 mm 17 mm unlimited n/a 433.925 MHz 30 m with 1 concrete wall 2 x CR2450 3.0V 70,3 mm 62,7 mm 52,3 mm unlimited n/a 433.925 MHz 20 m open space 2 x LR44 1.5V 19,5 mm 69,9 mm 30 20 433.925 MHz Wi-FI 2.4 GHz 30 m with 1 concrete wall Micro USB - 5V DC 100 mm 25 mm E n g l i s h CM-05 MOTION CM-05 LI-ION TUBULAR MOTOR MOTION CM-05 LI-ION TUBULAR MOTOR CM-11 1 Channel Remote CM-12 5 Channel Remote CM-13 15 Channel Remote CM-17 4 Channel Table Remote 1 3 2 4 Centre

(stop/favourite) Channel indicator Up Down Centre

(stop/favourite) Left Channel Selection Channel indicator Up Right Down Centre

(stop/favourite) Left Previous Channel Channel indicator Up Right Down Next Channel Channel 1 Centre

(stop/favourite) Channel 2 Down 1 2 Up Channel 3 Channel 4 3 4 Pair button Pair button Pair button Pair button E n g l i s h MOTION CM-05 LI-ION TUBULAR MOTOR MOTION CM-05 LI-ION TUBULAR MOTOR CM-15 1 Channel Wall Remote CM-16 4 Channel Wall Remote CM-18 1 Channel Tassel Remote CM-20 Motion Bridge Up Centre

(stop/favourite) Right Left Down Up Down Centre

(stop/favourite) Pair button Pair button Pair button See manual CM-20 E n g l i s h MOTION CM-05 LI-ION TUBULAR MOTOR MOTION CM-05 LI-ION TUBULAR MOTOR 1 Install the blind 6 Pair a remote Pair a remote control that is able to program blinds. See pages 4 and 5 for remote control details. In this manual, CM-12 is displayed. Click!

Click!

2 3 4 Click!

5 Activate the motor Activate the motor by charging it with a micro USB cable. A green LED will start flashing. The motor can be used during charging.

(To activate the motor without a micro USB cable, see step 25) 6.1 6.2 6.3 Shortly press the program button on the motor. The blind will start stepping, indicating that program mode has been activated.

(The blind keeps stepping until the program mode is deactivated.) Select a desired channel for the blind using the channel selection button on the remote control. Press the pair button on the back of the remote control to pair the blind with the selected channel. The blind will shortly stop stepping, indicating that the remote has been paired to the blind. Repeat steps 6.1 - 6.3 to remove a blind from a channel. Channel indicator Channel Selection Pair button End limits must be programmed to use a blind properly and to prevent it from being damaged. Proceed to step 12 if end limits are already set. 7 Check rotational direction WARNING: risk of damage. Stop the blind before reaching the end positions. Up Down 7.1 7.2 Shortly press the down button to check if the blind unrolls the right way. If the blind moves up, the rotational direction must be changed. Simultaneously press the up and down button to change the rotational direction. E n g l i s h