CM20 MOTION Wi-Fi bridge user manual

MANUAL CM-20 MOTION Wi-Fi bridge E n g l i s h The MOTION Wi-Fi bridge is the heart of your automated blinds network at home. The bridge unlocks endless possibilities to operate blinds with the MOTION app. Cloud connections with leading smart home applications enable voice control and a variety of smart automation options. Max. blinds Scenes Timers Frequency Range radio Power supply Length Height Certificates 30 20 20 433 MHz 2.4 GHz 30 m Micro USB DC 5V 1A 100 mm 25 mm Set button Reset button Micro-USB 5VDC Data transfer Internet connectivity Power indicator This box includes the following items:

100mm 100mm

(4 in)

(4 in) CM-20 MOTION Wi-Fi Bridge Micro-USB cable 75cm For the latest information and updated manuals, visit rtube.nl/cm-20 25mm 25mm

(1 in)

(1 in) 54mm 54mm

(2.1 in)

(2.1 in) FCC Manual I FCC ID: ZY4CM20 Regulatory Information 1 FCC Information for User This product does not contain any user-serviceable components and is to be used with approved an-

tennas only. Any product changes or modifications will invalidate all applicable regulatory certifications and approvals. 2 FCC Electronic Emission Notices This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference 2. This device must accept any interference received, including interference that may cause undesired operation. 3 FCC Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses and can radiate ra-

dio-frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. Operation of this equipment in a residential area may cause harmful interference, in which case the user will be required to correct the interference at their own expense. If this equipment does cause harmful interference to radio or television reception, which can be de-

termined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the distance separating the equipment and receiver. Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. MPE Reminding To satisfy FCC RF exposure requirements, a separation distance of 20 cm or more should be maintained between the antenna of this device and persons during device operation. To ensure compliance, operations at closer than this distance is not recommended. Safety WARNING: Important safety instructions. Follow all instructions, since incorrect installation can lead to severe injury. Do not let children play with the blind and/or remote control. Take care that the blind can move freely and is not blocked by any objects. Do not paint the device. Keep the device dry. Do not drop, knock, or shake the device. Rough handling can break internal circuit boards. Cleaning Follow these general rules when cleaning the outside of the device and its components:

Use a damp, soft, lint-free cloth. Avoid getting moisture in openings. Do not use aerosol sprays, solvents, alcohol, or abrasives. Service & Support Do not perform repairs yourself. Do not attempt to open the device or disassemble it. You run the risk of electric shock and voiding the limited warranty. No user-serviceable parts are inside. Warranty Service First follow the advice in this manual. If the product appears to be damaged or does not function properly, go to your local dealer for instructions on how to obtain warranty service. Recycle This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collec-tion systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling. EU Declaration Hereby, Coulisse declares that the radio equipment type CM-20 is in compliance whith directive 2014/53/EU The full text of the EU declaration of conformity is available at the following internet address: www.coulisse.com 1 Download the app and create an account 2 Power the bridge The MOTION Wi-Fi bridge needs to be set up with the MOTION Blinds app before installation on the wall or ceiling. Download the MOTION Blinds app from the App Store or Google Play with your smartphone or tablet. Open the MOTION app and create an account. There is no charger included with this product. Any universal DC 5V 1A micro-USB charger can be used to power the MOTION bridge. LED indicators App Store Download the MOTION Blinds app rtube.nl/red981 Google Play Download the MOTION Blinds app rtube.nl/red982 MOTION LED indicators Color Solid Red Blinking purple Blinking red Solid Yellow Solid Blue Blinking purple Blinking green Solid blue Status Bridge is powered on Bridge connecting mode Not connected to Wi-Fi Connected to Wi-Fi, not connected to MOTION cloud Connected to Wi-Fi Connected to MOTION cloud Pairing blind with bridge Bridge firmware update LED Right Center Center Center Center Left Left Center 1. DOWNLOAD THE APP AND CREATE AN ACCOUNT 2. POWER THE BRIDGE 3 Connect the bridge to a Wi-Fi network An active internet connection is required to add the MOTION bridge to your home Wi-Fi network. Choose a location for the MOTION bridge in your home. Connect your smartphone or tablet to your home Wi-Fi network to check the strength of the Wi-Fi signal at this location. To avoid interference please make sure the MOTION bridge is located at least one meter away from any other Wi-Fi devices, including your router. 3G/4G Video MOTION app:

how it works rtube.nl/red1074 3.1 Choose Edit at the top right of your screen and open Settings. 3.2 Click on your location

(MyHouse) to add the MOTION bridge to this location. 3.3 Press Add Bridge and follow the installation wizard to setup your bridge. The MOTION Blinds app allows to create 5 different locations. Up to 3 bridges can be added per location. 3. CONNECT THE BRIDGE TO A WI-FI NETWORK 3. CONNECT THE BRIDGE TO A WI-FI NETWORK 3.5 Return to the MOTION Blinds app and enter the password of the Wi-Fi network. 3.6 3.4 Make sure the MOTION bridge is powered ON. Open the Wi-Fi settings of your mobile device and connect to the Wi-Fi network you want to connect the MOTION bridge with. Press and hold the Set button on the MOTION bridge until the LED on top of the bridge starts to flash purple. Go to the app and press Connect. Now a MOTION Wi-Fi network is created by the bridge. 3.7 Keep the MOTION Blinds app running on the background, while opening the Wi-Fi settings of your mobile device. 3.8 Choose the MOTION_ XXXX network to connect with the bridge. Return to the MOTION Blinds app to finish the installation wizard. 3.9 The bridge automatically connects to your Wi-Fi network. The middle LED on the bridge first turns yellow and then blue. Now the bridge is connected to your Wi-Fi network and the MOTION cloud. 3. CONNECT THE BRIDGE TO A WI-FI NETWORK 3. CONNECT THE BRIDGE TO A WI-FI NETWORK 4 Add a blind Before adding a blind to the MOTION bridge, the end positions of the blind must be programmed with a remote control. 4.1 Go back to the start screen in the app and open your location. 4.2 4.3 Choose the blind type and follow the setup wizard. Navigate to Blind and press the + button to add a new blind.

(Make sure your blind has a top and bottom position programmed. If your blind does not have end positions please program first.) Program button on motor Pair button 4.4 Shortly press the program button on the blind. (Please see the manual of your motor to see where the program button is located.) The blind will start stepping, indicating that program mode is activated. Press the pair button to connect the blind with your bridge. 4. ADD A BLIND 4. ADD A BLIND 5 Roller/ Honeycomb/ Roman blind control 6 Double roller control Power indicator Edit blind Blind position Press to move the blind Blind position Press to move the blind Blind position Press to move the blind Hold and slide to set the favorite position. Tap to move the blind to the favorite position Blind position Slide to move the blind to any position Light control Slide to control the stripes with high precision Power indicator Edit blind Blind position Press to move the blind Hold and slide to set the favorite position. Tap to move the blind to the favorite position Blind position Slide to move the blind to any position Open blind Tap to move the blind to 100%

Close blind Tap to move the blind to 0%

Open blind Tap to move the blind to 100%

Close blind Tap to move the blind to 0%

Stop blind Tap to stop the blind 5. ROLLER BLIND CONTROL Stop blind Tap to stop the blind 6. DOUBLE ROLLER CONTROL 7 Top-down/Bottom-up control 8 Venetian control Blind position Press to move the blind Hold and slide to set the favorite position. Tap to move the blind to the favorite position Dual control Slide to move both rails at the same time Power indicator Edit blind Blind position Press to move the blind Mid rail position Slide to move the mid rail to any position Hold and slide to set the favorite position. Tap to move the blind to the favorite position Bottom rail position Slide to move the bottom bar to any position Blind position Press to move the blind Tilt control Press to tilt Tilt control Slide to tilt the blind Power indicator Edit blind Blind position Press to move the blind Tilt control Press to tilt Hold and slide to set the favorite position. Tap to move the blind to the favorite position Blind position Slide to move the blind to any position Open blind Tap to move the blind to 100%

Close blind Tap to move the blind to 0%

Open blind Tap to move the blind to 100%

Close blind Tap to move the blind to 0%

Stop blind Tap to stop the blind 7. TOP-DOWN/BOTTOM-UP CONTROL Stop blind Tap to stop the blind 8. VENETIAN CONTROL 9 Create a room Add blinds to a room to control individual blinds or all blinds in a room at the same time. Shortly click on a room to see/control all the blinds in this room 10 Create a scene Scenes can be created to move your blinds to preset positions. Swipe right to edit Position slider Target Position Edit scenes Swipe left to delete Play scene Add room 9.1 Press the + button to add a new room. 9.2 Click and hold on a room and control all the blinds to a certain postion. Add new scene 9. CREATE A ROOM 10. CREATE A SCENE 11 Create a timer Timers can be created to automate blinds and scenes to make the home seem inhabited. 12 Connect to third party Swipe right to edit Edit timers The MOTION bridge allows to seamlessly connect motorised blinds to smart home applications. Scan the QR code below to discover the third party connections. Swipe left to delete Turn on/off timer Add new timer Third party Discover third party connections for MOTION blinds rtube.nl/red1062 11. CREATE A TIMER 12. CONNECT TO THIRD PARTY 13 Frequently Asked Questions Problem Cause Solution Blind is not responding Can not pair your bridge Motor battery is empty Charge the motor. See the manual of your motor Radio interference / shielding Make sure that the bridge/antenna of the motor is out of the way from metal objects The distance from the bridge to the motor is too far Move the bridge closer to the blind The bridge is turned off Power the bridge Wrong password Router does not give an IP address to the bridge Start the setup wizard again and use the right password. The password is case sensitive Press and hold the reset button for 10 seconds. The center LED indicator will be RED. Retry to add the bridge 13. FREQUENTLY ASKED QUESTIONS All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form, by any means, electronic, mechanical, photocopying, recording, digital or otherwise without the written permission of the publisher. Although this manual has been composed with the utmost care, Coulisse b.v. does not accept any responsibility for damage due to mistakes and/or faults in this manual. Coulisse b.v. reserves the right to revise the manual and to revise and/or change its content at any time, without obligation to notify any person or entity of such revisions or changes. motion-blinds.com 2 R

-

U 0 2 M C