| submitted | available | document details (if available) | source link |
|---|---|---|---|
| February 14 2019 | February 14 2019 | Adobe PDF Library 15.0 |
| various | User manual DRA-2060 | Users Manual | 998.90 KiB | February 14 2019 |
AC2000 Mesh-Enabled Range Extender DRA-2060 QUICK INSTALLATION GUIDE GUA DE INSTALACIN RPIDAGUIA DE INSTALAO RPIDAPETUNJUK PEMASANGAN CEPAT CONTENTS OF PACKAGING AC2000 MESH-ENABLED RANGE EXTENDER DRA-2060 WI-FI CONFIGURATION CARD If any of these items are missing from your packaging, contact your reseller. INTRODUCTION The DRA-2060 extends the wireless coverage of an existing AP (access point) or wireless router, via wireless or Ethernet port, allowing you to reach more parts of your home with wireless. Internet Modem Router DRA-2060 Computer Tablet Smartphone Extend the wireless coverage of another AP or wireless router. DRA-2060 1 ENGLISH PRODUCT SETUP SETUP SELECT YOUR METHOD There are three methods available for setting up the DRA-2060 - using WI-FI Protected Setup (WPS) (recommended), the QRS Mobile App, or a web browser. SETTING UP THE DRA-2060 USING WI-FI PROTECTED SETUP (WPS) NOTE: To connect to a wireless router or AP and extend the Wi-Fi network in your home, please make sure the source router or AP features a WPS Button. Plug the DRA-2060 into a wall outlet and wait until the Status/WPS LED is blinking amber. Push the WPS button on the source wireless router or AP, and then push the WPS button on the DRA-2060. The Status/
WPS LED will start to flash green. Please allow up to two minutes for the process to finish. The Status/WPS LED will turn solid green when the DRA-2060 has connected successfully to the source wireless router or AP. If the Signal Indicator LED has a single amber bar after the connection process has finished, the DRA-2060 has established a poor quality connection. To improve the connection quality, the DRA-2060 should be relocated to a wall outlet closer to the source wireless router or AP. The more lit bars on the Signal Indicator LED, the better the wireless signal. The DRA-2060 is now ready to share the extended Wi-Fi network with your PCs and mobile devices. Connect to the extension network created by the DRA-2060 using the following network name (SSID):
2.4 GHz: (Your routers SSID)-EXT 5 GHz: (Your routers SSID)-EXT5G 5 GHz is recommended for the fastest wireless speeds. Please use your router's usual password. After WPS, the password of (Your routers SSID)-EXT will be the same as the router it is extending. DRA-2060 2 ENGLISH PRODUCT SETUP SETUP SET UP DRA-2060 WITH QRS MOBILE APP The DRA-2060 can be configured using your smartphone. Search for "D-Link QRS Mobile" on the Apple App Store or Google Play, and download the app. Next, connect your smartphone to the DRA-2060 using the SSID and Password information provided on the Wi-Fi Configuration Card and follow the helpful in-app prompts, or refer to the product manual for more information. SET UP DRA-2060 WITH A WEB BROWSER The DRA-2060 can also be configured using a web browser. Once you have plugged the DRA-2060 into a wall outlet within wireless range of your router or connected to your existing wired network, open the wireless utility on your computer, select the name (SSID) of the DRA-2060 network, and enter the password (both of these are found on your Wi-Fi Configuration Card). Next, open a web browser (e.g. Internet Explorer, Firefox, Safari, or Chrome) and enter http://dlinkap.local./ By default, the username is Admin, and the password field should be left blank. Please refer to the product manual for further information on configuring the DRA-2060 using a web browser. TROUBLESHOOTING SETUP AND CONFIGURATION PROBLEMS 1. HOW DO I RESET MY DRA-2060 AC2000 MESH-ENABLED RANGE EXTENDER TO FACTORY DEFAULT SETTINGS?
- Ensure the product is powered on.
- Using a paperclip, press and hold the reset button on the bottom of the device for 5 seconds. Note: Resetting the product to the factory default will erase the current configuration settings. The default Wi-Fi network name (SSID) and password are printed on the DRA-2060's Wi-Fi Configuration Card. 2. HOW DO I CONNECT A PC OR OTHER DEVICE TO THE DRA-2060 IF I HAVE FORGOTTEN MY WI-FI NETWORK NAME (SSID) OR WI-FI PASSWORD?
- If you haven't changed the extended Wi-Fi network's settings, you can use the network name (SSID) and Wi-Fi password on the Wi-Fi Configuration Card.
- If you did change the network name (SSID) or Wi-Fi password and you did not record this information on the Wi-Fi Configuration Card or somewhere else, you must reset the device as described in Question 1 above.
- It is recommended that you make a record of this information so that you can easily connect additional wireless devices in the future. You can use the included Wi-Fi Configuration Card to record this important information for future use. DRA-2060 3 ENGLISH TECHNICAL SUPPORT D-Link Middle East - Dubai, U.A.E. Plot No. S31102, Jebel Ali Free Zone South, P.O.Box 18224, Dubai, U.A.E. Tel: +971-4-8809022 Fax: +971-4-8809066 / 8809069 Technical Support: +971-4-8809033 General Inquiries: info.me@me.dlink.com Tech Support: support.me@me.dlink.com You can find software updates and user documentation on the D-Link website. Tech Support for customers in Australia:
Tel: 1300-700-100 24/7 Technical Support Web: http://www.dlink.com.au E-mail: support@dlink.com.au India:
Tel: +91-832-2856000 or 1860-233-3999 Web: www.dlink.co.in E-Mail: helpdesk@in.dlink.com Singapore, Thailand, Indonesia, Malaysia, Philippines, Vietnam:
Singapore - www.dlink.com.sg Thailand - www.dlink.co.th Indonesia - www.dlink.co.id Malaysia - www.dlink.com.my Philippines - www.dlink.com.ph Vietnam - www.dlink.com.vn Korea:
Tel : +82-2-2028-1810 Monday to Friday 9:00am to 6:00pm Web : http://d-link.co.kr E-mail : g2b@d-link.co.kr New Zealand:
Tel: 0800-900-900 24/7 Technical Support Web: http://www.dlink.co.nz E-mail: support@dlink.co.nz Egypt 1, Makram Ebeid Street -
City Light Building - floor 5 Nasrcity - Cairo, Egypt Tel.: +2 02 23521593 - +2 02 23520852 Technical Support: +2 02 26738470 General Inquiries: info.eg@me.dlink.com Tech Support: support.eg@me.dlink.com Kingdom of Saudi Arabia Office # 84 , Al Khaleej Building ( Mujamathu Al-Khaleej) Opp. King Fahd Road, Olaya Riyadh - Saudi Arabia Tel: +966 1121 70008 Technical Support:
+966 1121 70009 General Inquiries: info.sa@me.dlink.com Tech Support: support.sa@me.dlink.com 08600 DLINK (for South Africa only) South Africa and Sub Sahara Region:
Tel: +27 12 661 2025 Monday to Friday 8:30am to 9:00pm South Africa Time Web: http://www.d-link.co.za E-mail: support@za.dlink.com Pakistan Islamabad Office:
61-A, Jinnah Avenue, Blue Area, Suite # 11, EBC, Saudi Pak Tower, Islamabad - Pakistan Tel.: +92-51-2800397, 2800398 Fax: +92-51-2800399 Karachi Office:
D-147/1, KDA Scheme # 1, Opposite Mudassir Park, Karsaz Road, Karachi Pakistan Phone: +92-21-34548158, 34326649 Fax: +92-21-4375727 Technical Support: +92-21-34548310, 34305069 General Inquiries: info.pk@me.dlink.com Tech Support: support.pk@me.dlink.com 4 DRA-2060 ENGLISH TECHNICAL SUPPORT Morocco M.I.T.C Route de Nouaceur angle RS et CT 1029 Bureau N 312 ET 337 Casablanca , Maroc Phone : +212 663 72 73 24 Email: support.na@me.dlink.com Lebanon RMA center Dbayeh/Lebanon PO Box:901589 Tel: +961 4 54 49 71 Ext:14 Fax: +961 4 54 49 71 Ext:12 Email: taoun@me.dlink.com Bahrain Technical Support: +973 1 3332904 Kuwait:
Technical Support: + 965 22453939 / +965 22453949 This purpose of this product is to create a constant network connection for your devices. As such, it does not have a standby mode or use a power management mode. If you wish to power down this product, please simply unplug it from the power outlet. DRA-2060 5 ENGLISH AC1200 DRA-2060
- ,
. DRA-2060 ( )
(
Ethernet), . DRA-2060
. 6 DRA-2060 DRA-2060 Wi-Fi Protected Setup
(WPS) (), QRS Mobile Web-. DRA-2060 WI-FI PROTECTED SETUP (WPS)
:
, , , , WPS. DRA-2060
, /WPS
. WPS
, WPS DRA-2060.
/WPS .
, . DRA-2060
/WPS
.
, DRA-2060
. , DRA-2060 ,
.
, . DRA-2060.
(SSID):
2,4 : (SSID )-EXT 5 : (SSID )-EXT5G 5 . ,
.
* WPS "(SSID
)-EXT" ,
, . 7 DRA-2060 DRA-2060 QRS MOBILE DRA-2060, .
"D-Link QRS Mobile" Apple App Store Google Play . DRA-2060, SSID ,
,
. DRA-2060 WEB-
DRA-2060 Web-. DRA-2060
,
, DRA-2060 (SSID)
( ). Web- (, Internet Explorer, Firefox, Safari Chrome) http://dlinkap.local./ - Admin,
. , DRA-2060 . 1. DRA-2060 ?
- , .
- , Reset 5 .
:
. (SSID)
. 2. DRA-2060,
(SSID) ?
- ,
(SSID) ,
.
- (SSID)
, , 1.
- ,
. 8 DRA-2060 IEEE 802.11ac IEEE 802.11a IEEE 802.11n IEEE 802.11g IEEE 802.11b 1 2,4 2,4835 5,15 5,35 802.11ac/n/g/b/a 10/100/1000 /
Reset WPS Wi-Fi Protected Access (WPA/WPA2) Wi-Fi Protected Setup (WPS) 64/128- WEP QRS Mobile iOS Android 0 40C
-20 65C 0% 90% ( ) 5% 95% ( ) 110-240 5,5 FCC CE IC C-Tick UL Wi-Fi Certified 63x95x41 Web-
139
/WPS 3-
1 DRA-2060 9
- D-Link. D-Link . D-Link
. D-Link ,
. . D-Link:
8-800-700-5465
:
http://www.dlink.ru e-mail: support@dlink.ru
:
- , 114, , , , 3-, 289
, :
-
390043, . , . , .16
.: +7 (4912) 503-505 20 '
072-2575555 support@dlink.co.il
, , 14
. : +7 (495) 744-00-99 E-mail: mail@dlink.ru
, . , 87-
.: +38 (044) 545-64-40 E-mail: ua@dlink.ua Moldova Chisinau; str.C.Negruzzi-8 Tel: +373 (22) 80-81-07 E-mail:info@dlink.md
, - , 169
.: +375 (17) 218-13-65 E-mail: support@dlink.by
, -c,143
.: +7 (727) 378-55-90 E-mail: almaty@dlink.ru
, 3-
, 23/5
. +374 (10) 39-86-67
. info@dlink.am Latvija Rga, Lielirbes iela 27 Tel.: +371 (6) 761-87-03 E-mail: info@dlink.lv Lietuva Vilnius, irmn 139-303 Tel.: +370 (5) 236-36-29 E-mail: info@dlink.lt Eesti E-mail: info@dlink.ee Trkiye Uphill Towers Residence A/99 Ataehir /ISTANBUL Tel: +90 (216) 492-99-99 Email: info.tr@dlink.com.tr 10 DRA-2060 CONTENIDO DEL EMPAQUE AC2000 MESH-ENABLED RANGE EXTENDER DRA-2060 TARJETA DE INSTALACIN WI-FI Si cualquiera de estos artculos falta en su empaque, pngase en contacto con su distribuidor. INTRODUCCIN El DRA-2060 ampla la cobertura inalmbrica de un AP (punto de acceso) existente o router inalmbrico, a travs del puerto Ethernet o inalmbrico, permitiendo llegar a ms partes de su casa con la tecnologa inalmbrica. Internet Modem Router DRA-2060 Computador Tablet Smartphone Extiende la cobertura inalmbrica de otro punto de acceso o router inalmbrico. DRA-2060 11 ESPAOL CONFIGURACIN DE PRODUCTO CONFIGURAR SELECCIONE SU MTODO Hay tres mtodos disponibles para configurar el DRA-2060 - utilizando configuracin Wi-
Fi protegida (WPS) (recomendado), la aplicacin QRS Mobile, o un navegador web. CONFIGURACIN DEL DRA-2060 MEDIANTE WI-FI PROTECTED SETUP (WPS) NOTA: Para conectarse a un router o punto de acceso inalmbrico y extender la red Wi-Fi en su hogar, por favor asegrese de que el router o AP de origen cuenta con un botn WPS. Conecte el DRA-2060 a una toma de corriente y espere hasta que el LED Estado / WPS parpadea en color mbar. Pulse el botn WPS en el router inalmbrico o AP de origen, y luego pulse el botn WPS en el DRA-
2060. El LED Estado / WPS comenzar a parpadear de color verde. Por favor permita hasta dos minutos para que el proceso finalice. El LED Estado / WPS se enciende en verde cuando el DRA-2060 se ha conectado correctamente al enrutador inalmbrico o AP de origen. Si el indicador LED de seal tiene una sola barra de color mbar despus de que el proceso de conexin ha terminado, el DRA-2060 ha establecido una conexin de mala calidad. Para mejorar la calidad de la conexin, el DRA-2060 debe ser reubicado en una toma de corriente cerca del router inalmbrico o AP de origen. Mientras tenga ms barras encendidas en el indicador LED de seal, mejor ser la seal inalmbrica. El DRA-2060 ya est listo para compartir la Red Wi-
Fi extendida con sus PCs y dispositivos mviles. Conctese a la red extendida creada por el DRA-2060 utilizando el nombre siguiente de la red (SSID):
2.4 GHz: (SSID de su router) -EXT 5 GHz: (SSID de su router) -EXT5G 5 GHz se recomienda para mayores velocidades. Por favor utilice la contrasea habitual de su router.
*Despus de WPS, la contrasea de "(SSID de su router)-EXT" ser la misma que el router que se est extendiendo. DRA-2060 12 ESPAOL CONFIGURACIN DE PRODUCTO CONFIGURAR CONFIGURAR DRA-2060 CON APLICACIN QRS MOBILE El DRA-2060 se puede configurar utilizando un Smartphone. Busque "D-Link QRS Mobile" en el Apple App Store o Google Play y descargue la aplicacin. A continuacin, conecte el Smartphone para el DRA-2060 utilizando la informacin SSID y la contrasea proporcionada en la tarjeta de configuracin Wi-Fi y siga las tiles indicaciones de la aplicacin, o consulte el manual del producto para obtener ms informacin. CONFIGURAR DRA-2060 CON UN NAVEGADOR WEB El DRA-2060 tambin se puede configurar utilizando un navegador web. Una vez que haya conectado el DRA-2060 en una toma de corriente dentro del rango inalmbrico de su router o conectado a la red cableada existente, abra la utilidad inalmbrica en su equipo, seleccione el nombre (SSID) de la red DRA-2060, e ingrese la contrasea (ambos se encuentran en su tarjeta de configuracin Wi-Fi). A continuacin, abra un navegador web (por ejemplo, Internet Explorer, Firefox, Safari o Chrome) e introduzca http: //dlinkap.local./ Por defecto, el nombre de usuario es admin y el campo de la contrasea debe dejarse en blanco. Por favor, consulte el manual del producto para obtener ms informacin sobre cmo configurar el DRA-2060 utilizando un navegador web. SOLUCIN DE PROBLEMAS PROBLEMAS DE INSTALACIN Y CONFIGURACIN 1. CMO PUEDO RESTABLECER MI DRA-2060 AC1200 WIRELESS DUAL BAND EXTENDER A SU CONFIGURACIN PREDETERMINADA DE FBRICA?
- Asegrese de que el producto est encendido.
- Utilice un clip extendido, presione y mantenga presionado el botn de reset en la parte inferior del dispositivo durante 5 segundos. Nota: El Restablecimiento del producto a la configuracin predeterminada de fbrica borrar la configuracin actual. El nombre predeterminado de Wi-Fi de la red
(SSID) y la contrasea estn impresos en la tarjeta de configuracin Wi-Fi del DRA-2060. 2. CMO PUEDO CONECTAR UN PC U OTRO DISPOSITIVO AL DRA-2060 SI HE OLVIDADO MI NOMBRE WI FI-RED (SSID) O WI-FI CONTRASEA?
- Si no ha cambiado la configuracin de la red Wi-Fi extendida, puede utilizar el nombre de red (SSID) y la contrasea de Wi-Fi en la tarjeta de configuracin Wi-Fi.
- Si lo hizo cambie el nombre de red (SSID) o la contrasea Wi-Fi y si no guard esta informacin en la tarjeta de configuracin Wi-Fi o en otro lugar, debe restablecer el dispositivo como se describe en la pregunta 1 anterior.
- Se recomienda que realice un registro de esta informacin para que pueda conectar fcilmente dispositivos inalmbricos adicionales en el futuro. Puede utilizar la tarjeta de configuracin Wi-Fi incluida para registrar esta informacin importante para el uso futuro. DRA-2060 13 ESPAOL SOPORTE TCNICO Usted puede encontrar actualizaciones de softwares o firmwares y documentacin para usuarios a travs de nuestro sitio www.dlinkla.com SOPORTE TCNICO PARA USUARIOS EN LATINO AMERICA Por favor revise el nmero telefnico del Call Center de su pas en http://www.dlinkla.com/soporte/call-center Soporte Tcnico de D-Link a travs de Internet Horario de atencin Soporte Tcnico en www.dlinkla.com e-mail: soporte@dlinkla.com & consultas@dlinkla.com Por favor asegrese de que los canales 36/40/44/48 en la banda de 5 GHz estn sin licencia y sin restricciones de uso en su pas de residencia antes de utilizarlos. Cualquier uso ilegal de estos canales es responsabilidad del usuario. 14 DRA-2060 ESPAOL CONTEDO DA EMBALAGEM REPETIDOR & PONTO DE ACESSO WIRELESS AC1200 DRA-2060 CARTO DE CONFIGURAES WI-FI Se algum desses itens estiver faltando, favor contatar seu revendedor. INTRODUO O DRA-2060 estende o alcance da rede sem fios de um AP (Ponto de Acesso) ou roteador wireless existente, atravs de conexo Wi-Fi (como Repetidor) ou porta Ethernet (como Ponto de Acesso). Internet Modem Roteador DRA-2060 Computador Tablet Smartphone Estenda a cobertura da rede wireless de outro AP ou roteador wireless. DRA-2060 15 PORTUGUS INSTALAO DO PRODUTO INSTALAO SELECIONE SEU MTODO Existem trs mtodos disponveis para instalar o DRA-2060: usando o boto WI-FI Protected Setup (WPS) (recomendado), o Aplicativo QRS Mobile, ou um navegador de internet. INSTALANDO O DRA-2060 UTILIZANDO WI-FI PROTECTED SETUP (WPS) NOTA: Para conectar em um roteador wireless ou AP e estender a rede Wi-Fi em sua residncia, por favor, certifique-se de que o roteador ou AP principal possui um boto WPS. Plugue o DRA-2060 numa tomada e espere at que o LED Status/WPS esteja piscando na cor laranja. Aperte o boto WPS no roteador ou AP principal, e, em seguida, aperte o boto WPS no DRA-2060. O LED Status/WPS comear a piscar em verde. Por favor, aguarde 2 minutos at finalizar o processo. O LED Status/WPS ficar verde (luz fixa) quando o DRA-
2060 conectar com sucesso no roteador ou AP principal. Se o LED tiver uma nica barra de sinal na cor laranja depois de finalizado o processo de conexo, significa que o DRA-2060 estabeleceu uma conexo de baixa qualidade. Para melhorar a qualidade de conexo, o DRA-2060 deve ser colocado em uma tomada prxima do roteador ou AP principal. Quanto mais barras de sinal estiverem sendo exibidas no produto, melhor ser a qualidade Wi-Fi de toda a rede. Agora o DRA-2060 est pronto para compartilhar a rede Wi-
Fi estendida com seus PCs e dispositivos mveis. Conecte na rede estendida criada pelo DRA-2060 atravs dos seguintes nomes de rede (SSID):
2.4 GHz: (SSID do seu roteador)-EXT 5 GHz: (SSID do seu roteador)-EXT5G A rede de 5 GHz recomendada para a mais rpida velocidade de conexo wireless. Por favor, utilize a senha atual do seu roteador.
*Aps usar a tecnologia WPS, a senha da sua nova rede Wi-Fi (SSIDsuarede)-EXT ser a mesma que a de seu roteador. DRA-2060 16 PORTUGUS INSTALAO DO PRODUTO INSTALAO INSTALANDO O DRA-2060 COM O APLICATIVO QRS O DRA-2060 pode ser instalado atravs de seu smartphone. Procure por D-Link QRS Mobile na App Store da Apple ou no Google Play, e baixe o aplicativo. Em seguida, conecte seu smartphone no DRA-2060 usando a SSID e senha fornecidas no Carto de Configurao Wi-Fi e siga as instrues do prprio aplicativo, ou consulte o manual do produto para mais informaes. INSTALANDO O DRA-2060 ATRAVS DE UM NAVEGADOR DE INTERNET O DRA-2060 tambm pode ser instalado atravs de um navegador de internet. Aps plugar o DRA-2060 numa tomada que esteja dentro do alcance de sinal da rede wireless do seu roteador ou conectado na sua rede wireless existente, abra a opo de redes sem fio em seu computador, selecione o nome (SSID) da rede do DRA-2060, e digite a senha
(ambos podem ser encontrados no seu Carto de Configurao Wi-Fi). Em seguida, abra um navegador de internet (por exemplo, Internet Explorer, Firefox, Safari ou Chrome) e digite http://dlinkap.local/. Por padro, o nome de usurio Admin, e o campo da senha deixado em branco. Por favor consulte o manual do produto para informaes adicionais sobre a configurao do DRA-2060 atravs de um navegador de internet. SOLUO DE PROBLEMAS PROBLEMAS DE INSTALAO E CONFIGURAO 1. COMO REINICIO MEU REPETIDOR WI-FI DRA-2060 AC1200 PARA AS CONFIGURAES DE FBRICA?
- Certifique-se de que o produto est ligado.
-Utilizando um clipe de papel, pressione o boto de reset atrs do dispositivo por 5 segundos. Nota: Reiniciar o produto para o padro de fbrica ir apagar todas as configuraes j feitas. O nome padro da rede Wi-Fi (SSID) e senha esto impressos no Carto de Configuraes Wi-Fi do DRA-2060. 2. COMO CONECTO UM COMPUTADOR OU OUTRO DISPOSITIVO NO DRA-2060 SE TIVER ESQUECIDO O NOME DA MINHA REDE WI-FI (SSID) OU SENHA?
- Se voc no alterou as configuraes padres do DRA-2060, voc pode usar o nome de rede (SSID) e senha que esto no Carto de Configuraes Wi-Fi que acompanha o produto.
-Se voc alterou o nome de rede (SSID) ou senha e no guardou essa informao, seja no Carto de Configurao Wi-Fi ou em qualquer outro lugar, voc deve reiniciar o dispositivo como descrito na Questo 1 acima.
- recomendado que voc anote ou guarde essa informao para poder conectar outros dispositivos wireless futuramente. Voc pode usar o Carto de Configuraes Wi-fi incluso para guardar essa informao importante para uso futuro. DRA-2060 17 PORTUGUS SUPORTE TCNICO Caso tenha dvidas na instalao do produto, entre em contato com o Suporte Tcnico D-Link. Acesse o site: www.dlink.com.br/suporte 18 DRA-2060 PORTUGUS AC2000 MESH DRA-2060 The DRA-2060 DRA-2060 DRA-2060 19 DRA-2060:WPS()QRS Mobile App WPSDRA-2060
:
WPS DRA-2060LED WPS DRA-2060WPS(3)DRA-2060 LED 2 LEDDRA-2060 LED DRA-
2060 DRA-2060 DRA-2060 DRA-2060:
2.4GHZ:-EXT EX:SSID-EXT 5GHZ: -EXT5G EX:SSID-EXT5G
*WPS "
-EXT"
DRA-2060 20 QRS Mobile AppDRA-2060 IOS 1 QRS Mobile App DRA-2060SSID() 2 QRS Mobile APP 3 DRA-2060
: DRA-2060 DRA-2060 21 4 SSID
() SSID
: SSID 5 DRA-2060 6 DRA-2060 DRA-2060 22 DRA-2060 DRA-2060 DRA-2060DRA-2060 LEDDRA-2060(SSID
)http://dlinkap.local./
DRA-2060Admin 1. DRA-2060(RESET)?
(1)
(2) DRA-2060reset5
! DRA-2060 2. DRA-2060?
?
DRA-2060 SSID 1DRA-2060 DRA-2060 23 D-Link D-Link D-Link 0800-002-615
(02) 6600-0123#8715 http://www.dlink.com.tw dssqa_service@dlink.com.tw http://www.dlink.com.tw D-Link
(852) 8100 8892 10:00 ~ 13:0014:00 ~ 18:00 09:00 ~ 13:00 /
service@cn.synnex-grp.com http://www.dlink.com.hk http://www.dlink.com.hk/contact.html D-Linkwww.dlink.com QR code
!
:
:
24 DRA-2060 ISI KEMASAN AC2000 MESH-ENABLED RANGE EXTENDER DRA-2060 KARTU KONFIGURASI WI-FI Jika terdapat salah satu item yang hilang dari kemasan Anda, hubungi penjual. PENDAHULUAN DRA-2060 memperluas jangkauan nirkabel dari sebuah AP (akses point) yang ada atau router nirkabel, melalui port nirkabel atau Ethernet, memungkinkan Anda untuk menjangkau lebih banyak bagian dari rumah Anda dengan nirkabel. Internet Modem Router DRA-2060 Komputer Tablet Smartphone Memperluas jangkauan nirkabel dari AP atau router nirkabel lain. DRA-2060 25 BAHASA INDONESIA PENGATURAN PERANGKAT PENGATURAN PILIH METODE ANDA Ada tiga metode yang tersedia untuk menyiapkan DRA-2060 - menggunakan WI-FI Protected Setup (WPS) (dianjurkan), QRS Mobile App, atau web browser. MEMASANG DRA-2060 MENGGUNAKAN WI-FI PROTECTED SETUP (WPS) CATATAN: Untuk menghubungkan ke router nirkabel atau AP dan memperluas jaringan Wi-Fi di rumah Anda, pastikan router atau AP sumber memiliki tombol WPS. Colokkan DRA-2060 ke stopkontak dan tunggu sampai LED Status/WPS berkedip kuning. Tekan tombol WPS pada router nirkabel atau AP sumber, kemudian tekan tombol WPS pada DRA-2060. LED Status/WPS akan mulai berkedip hijau. Silahkan tunggu hingga dua menit sampai proses selesai. LED Status/WPS akan berubah menjadi hijau padat ketika DRA-2060 terhubung dengan sukses ke router nirkabel atau AP sumber. Jika LED Signal Indicator menunjukkan satu bar kuning setelah proses koneksi selesai, berarti DRA-
2060 telah membentuk koneksi dengan kualitas buruk. Untuk meningkatkan kualitas koneksi, DRA-2060 harus direlokasi ke stopkontak yang lebih dekat dengan router nirkabel atau AP sumber. Semakin banyak bar yang menyala pada LED Signal Indicator, berarti semakin baik sinyal nirkabelnya. Sinyal Wi-Fi DRA-2060 sekarang siap untuk digunakan Oleh PC dan perangkat mobile. Sambungkan ke jaringan ekstensi yang diciptakan oleh DRA-2060 dengan menggunakan nama jaringan berikut (SSID):
2,4 GHz: (SSID router Anda) -EXT 5 GHz: (SSID router Anda) -EXT5G 5 GHz dianjurkan untuk kecepatan nirkabel tinggi. Gunakan password router Anda yang biasa.
* Stelah WPS, password untuk "(Nama SSID router)-
EXT" akan menjadi sama seperti router yang diperluas. 26 DRA-2060 BAHASA INDONESIA PENGATURAN PERANGKAT PENGATURAN MENGATUR DRA-2060 DENGAN QRS MOBILE APP DRA-2060 dapat dikonfigurasi menggunakan smartphone Anda. Cari dan download aplikasi "D-Link QRS Mobile" di Apple App Store atau Google Play. Berikutnya, hubungkan smartphone Anda ke DRA-2060 dengan menggunakan informasi SSID dan Password yang disediakan di Kartu Konfigurasi Wi-Fi dan ikuti petunjuk dalam aplikasi, atau lihat manual produk untuk informasi lebih lanjut. MENGATUR DRA-2060 DENGAN WEB BROWSER DRA-2060 juga dapat dikonfigurasi dengan menggunakan web browser. Setelah Anda memasang DRA-2060 ke stopkontak dalam jangkauan nirkabel dari router atau terhubung ke jaringan kabel yang ada, buka utilitas nirkabel di komputer Anda, pilih nama (SSID) dari DRA-2060, dan masukkan password (kedua informasi ini dapat ditemukan pada Kartu Konfigurasi Wi-Fi Anda). Berikutnya, buka web browser (misalnya Internet Explorer, Firefox, Safari atau Chrome) dan masukkan http://dlinkap.local./ secara default, nama pengguna adalah Admin, dan bagian sandi harus dibiarkan kosong. Silakan lihat manual produk untuk informasi lebih lanjut tentang konfigurasi DRA-2060 menggunakan browser web. PENANGANAN MASALAH MASALAH DALAM PENGATURAN DAN KONFIGURASI 1. BAGAIMANA CARA ME-RESET DRA-2060 AC1200 WIRELESS DUAL BAND EXTENDER KE PENGATURAN DEFAULT PABRIK?
- Pastikan produk dihidupkan.
- Gunakan penjepit kertas, tekan dan tahan tombol reset di bagian bawah perangkat selama 5 detik. Catatan: Me-reset produk ke default pabrik akan menghapus pengaturan konfigurasi Anda. Nama default Wi-Fi (SSID) dan password tercetak pada Kartu Konfigurasi Wi-Fi DRA-2060 ini. 2. BAGAIMANA CARA MENGHUBUNGKAN PC ATAU PERANGKAT LAIN KE DRA-2060 JIKA SAYA LUPA NAMA WI-FI (SSID) ATAU PASSWORD WI-FI?
- Jika Anda belum mengubah pengaturan jaringan Wi-Fi, Anda dapat menggunakan nama jaringan (SSID) dan sandi Wi-Fi yang tercetak pada Kartu Konfigurasi Wi-Fi.
- Jika Anda tidak mengubah nama jaringan (SSID) atau password Wi-Fi dan Anda tidak merekam informasi ini di Kartu Konfigurasi Wi-Fi atau di tempat lain, Anda harus mengatur ulang perangkat seperti yang dijelaskan dalam Pertanyaan 1 di atas.
- Disarankan agar Anda membuat catatan informasi ini sehingga Anda dapat dengan mudah menghubungkan perangkat nirkabel tambahan di masa depan. Anda dapat menggunakan Kartu Konfigurasi Wi-Fi untuk merekam informasi penting ini untuk penggunaan masa depan. DRA-2060 27 BAHASA INDONESIA DUKUNGAN TEKNIS Update perangkat lunak dan dokumentasi pengguna dapat diperoleh pada situs web D-Link. Dukungan Teknis untuk pelanggan:
Dukungan Teknis D-Link melalui telepon:
Tel: 0800-14014-97 (Layanan Bebas Pulsa) Dukungan Teknis D-Link melalui Internet:
Pertanyaan Umum: sales@id.dlink.com Bantuan Teknis: support@id.dlink.com Website : http://www.dlink.co.id 28 DRA-2060 BAHASA INDONESIA FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement This device complies with FCC radiation exposure limits set forth for an uncontrolled environment and it also complies with Part 15 of the FCC RF Rules. This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and consider removing the no-col-
location statement. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. CAUTION!
Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. IC The device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems les dispositifs fonctionnant dans la bande 5150-5250 MHz sont rservs uniquement pour une utilisation lintrieur afin de rduire les risques de brouillage prjudiciable aux systmes de satellites mobiles utilisant les mmes canaux;
CANADA STATEMENT This device complies with Industry Canadas licence-exempt RSSs. Operation is subject to the following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :
(1) lappareil ne doit pas produire de brouillage;
(2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS-102 RF exposure, users can obtain Canadian information on RF exposure and compliance. Le dispositif rencontre l'exemption des limites courantes d'valuation dans la section 2.5 de RSS 102 et la conformit l'exposition de RSS-102 rf, utilisateurs peut obtenir l'information canadienne sur l'exposition et la conformit de rf. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. Cet metteur ne doit pas tre Co-plac ou ne fonctionnant en mme temps qu'aucune autre antenne ou metteur. Cet quipement devrait tre install et actionn avec une distance minimum de 20 centimtres entre le radiateur et votre corps. CIDF15000447 Ver.1.00(NCC)_125x85 2019/01/11 610000009179
This product uses the FCC Data API but is not endorsed or certified by the FCC