COVR2200A1 Tri Band Whole Home Wi-Fi Extender User Manual

Company: D-Link Corporation

FCC ID: KA2COVR2200A1

submitted	available	document details (if available)	source link
March 04 2018	October 04 2018	Adobe PDF Library 10.0.1

exhibit
download
text

various

User Manual

Users Manual

pdf

3.79 MiB

March 04 2018 / October 04 2018

Covr your whole home in Seamless Wi-Fi C100 M0 Y19 K23 Pantone 3145C High Performance More Coverage One Seamless Network AC2200 TRI-BAND WHOLE HOME WI-FI SYSTEM C100 M0 Y19 K23 Pantone 3145C COVR-2202/2200 USER MANUAL D-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any person or organization of such revisions or changes. Preface Manual Revisions Revision 1.00 Date Description March 13, 2018 Initial release. Trademarks D-Link and the D-Link logo are trademarks or registered trademarks of D-Link Corporation or its subsidiaries in the United States or other countries. All other company or product names mentioned herein are trademarks or registered trademarks of their respective companies. Apple, Apple logo, Safari, iPhone, iPad, iPod touch and Macintosh are trademarks of Apple Inc., registered in the U.S. and other countries. App StoreSM is a service mark of Apple Inc. Chrome browser, Google Play and Android are trademarks of Google Inc. Internet Explorer, Windows and the Windows logo are trademarks of the Microsoft group of companies. Copyright 2018 by D-Link Corporation, Inc. All rights reserved. This publication may not be reproduced, in whole or in part, without prior expressed written permission from D-Link Corporation, Inc. Power Usage ErP Power Usage This device is an Energy Related Product (ErP) that automatically switches to a power-saving Network Standby mode within 1 minute of no packets being transmitted. If it is not needed during certain periods of time, it can be unplugged to save energy. Network Standby: 3.5 watts D-Link COVR-2202 User Manual i Table of Contents Product Overview ..............................................................1 Package Contents ......................................................................... 1 System Requirements ................................................................. 2 Introduction ................................................................................... 3 Features ............................................................................................ 3 Hardware Overview ..................................................................... 5 COVR-2200 LED Indicator .................................................. 5 COVR-2200 Rear Panel ........................................................ 6 Hardware Setup ............................................................................ 7 Using The D-Link Wi-Fi App .............................................. 7 Manual Installation ...........................................................10 Configuration ...................................................................12 Home ..............................................................................................13 Internet ...................................................................................14 COVR-2200 ............................................................................15 Connected Clients ..............................................................16 Extenders ...............................................................................17 Settings ..........................................................................................18 Wizard .....................................................................................18 Internet ...................................................................................19 IPv4 .....................................................................................19 IPv6 .....................................................................................29 VLAN ...................................................................................42 Wireless ..................................................................................44 Wi-Fi ....................................................................................44 Guest Zone .......................................................................46 Network ..................................................................................47 Advanced ......................................................................................49 QoS Engine............................................................................49 Firewall ...................................................................................51 IPv4/IPv6 Rules ...............................................................53 Port Forwarding ..................................................................54 Port Forwarding .............................................................54 Virtual Server ...................................................................55 Website Filter ...................................................................56 Static Routes .........................................................................57 IPv4 .....................................................................................57 IPv6 .....................................................................................58 Dynamic DNS .......................................................................59 Management ................................................................................61 Time & Schedule .................................................................61 Time ....................................................................................61 Schedule ...........................................................................62 System Log ............................................................................63 System Admin ......................................................................65 Admin.................................................................................65 System ...............................................................................67 Upgrade .................................................................................68 Statistics .................................................................................69 Adding Additional Covr Points .......................................70 Using the D-Link Wi-Fi App .....................................................70 D-Link COVR-2202 User Manual ii Table of Contents Connect to a Wireless Client ...........................................73 WPS Button ...................................................................................73 Upgrading Firmware .......................................................74 Using the Web User Interface .................................................74 Using the D-Link Wi-Fi App .....................................................74 Resetting Your Device .....................................................76 Wireless Basics .................................................................77 What is Wireless? .........................................................................78 Tips ...................................................................................................80 Technical Specifications ..................................................81 Regulatory Information ..................................................83 D-Link COVR-2202 User Manual iii Table of Contents Product Overview Package Contents COVR-2200 Covr Point A Router (x 1) COVR-2200 Covr Point (x 1) Ethernet Cable Power adapter (x 2) Quick Installation Guide Wi-Fi Configuration Card Wi-Fi Configuration Card If any of the above items are missing or damaged, please contact your local reseller. D-Link COVR-2202 User Manual 1 Section 1 - Product Overview System Requirements Network Requirements An Ethernet-based cable or DSL modem IEEE 802.11ac/n/g/b/a wireless clients 10/100/1000 Mbps Ethernet Computer with the following:

Windows, Macintosh, or Linux-based operating system An installed Ethernet adapter or Wi-Fi interface Web-based Configuration Utility Requirements Browser requirements:

Internet Explorer 10 or higher Firefox 28 or higher Safari 6 or higher Chrome 28 or higher D-Link Wi-Fi App Requirements iOS or Android smartphone or tablet. (Please refer to the mobile app's store page to check whether your device is compatible.) D-Link COVR-2202 User Manual 2 Section 1 - Product Overview Introduction The COVR-2202 AC2200 Tri-Band Whole Home Wi-Fi System is an elegant, high-performance home networking solution comprised of three COVR-2200 Covr Points. Each Covr Point features powerful AC1200 Wi-Fi combined with two on-board Gigabit Ethernet ports to bring the uncompromised, full potential of AC1200 Wi-Fi to any area in your home, offering true seamless whole home coverage. With COVR-2202, D-Link has got you Covrd. Features Powerful Wi-Fi - Most whole home Wi-Fi systems use multiple low-performance devices to disperse Wi-Fi throughout areas of the home. COVR-2202 uses AC1200 Wi-Fi to create a blazing-fast, seamless whole home network throughout your home, even in the most hard-to-reach places. Smart Roaming - The AC2200 Tri-Band Whole Home Wi-Fi System creates a single, seamless wireless network throughout your entire home using a single wireless network name (SSID). This means that once you connect, your connection is maintained seamlessly as you and your wireless device roam throughout your home, allowing you to experience an uninterrupted connection without buffering, drop-outs, or dead spots. MU-MIMO Technology - Multi-User Multiple Input Multiple Output (MU-MIMO) sends and receives data to and from multiple devices simultaneously to increase speed and efficiency. Your laptop, tablet, media player, and game console can all be sending and receiving data at the same time, with no need to wait in line, allowing you to get more out of your home Wi-Fi network than ever before. 1 Maximum wireless signal rate derived from IEEE Standard 802.11a, 802.11g, 802.11n and 802.11ac specifications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead, may lower actual data throughput rate. Environmental conditions will adversely affect wireless signal range. D-Link COVR-2202 User Manual 3 Section 1 - Product Overview Features (continued) Smart Steering - Behind the scenes, each Covr Point automatically determines whether to connect a device to the 2.4 or 5 GHz band, providing the best speed and range for each device and optimally distributing devices to each network. Expandable Network - Covr is a scalable solution; extra Covr Points can be added to increase the reach of your network. Scale up your Wi-Fi by adding another Covr Point to get true whole-home coverage. Easy Setup - Using the free D-Link Wi-Fi app or the intuitive web-based user interface, you can quickly set up the COVR-2202 and configure your network with your specific settings in a matter of minutes. D-Link COVR-2202 User Manual 4 Section 1 - Product Overview Hardware Overview COVR-2200 LED Indicator 1 1 COVR Status LED Solid red The COVR-2200 is booting up. Blinking orange The COVR-2200 is syncing to another COVR-2200 Covr Point. Once set up, a blinking orange LED indicates there is no connection to the device. Blinking white Once set up, a blinking white LED indicates a weak connection, or that the Covr Point is connecting to a wireless client using Wi-Fi Protected Setup (WPS). Solid white The COVR-2200 is powered on and running. Once set up, a solid white LED indicates a strong connection. Off The COVR-2200 is powered off. If the device is powered on and Status LED is disabled, the device is working as normal. Refer to the Admin section on page 65 for more information. D-Link COVR-2202 User Manual 5 Section 1 - Product Overview COVR-2200 Rear Panel 3 1 2 1 2 3 Power Connector Connect the included power adapter here to power on the device. Gigabit LAN ports Connect Ethernet devices such as computers, switches, storage (NAS) devices, and game consoles. On Covr Point A, LAN port 1 is designated as the WAN port that connects to your modem. WPS Press this button to establish an instant connection to a wireless client using Wi-Fi Protected Setup

(WPS). D-Link COVR-2202 User Manual 6 Section 1 - Product Overview Hardware Setup Using The D-Link Wi-Fi App The free D-Link Wi-Fi app allows you to install and configure your COVR-2202 AC2200 Tri-Band Whole Home Wi-Fi System from your mobile device or tablet. This following section will walk you through the installation and configuration steps for the COVR-2202 AC2200 Tri-Band Whole Home Wi-Fi System using the D-Link Wi-Fi app. To get the D-Link Wi-Fi app, browse the App Store or Google Play and search for D-Link Wi-Fi. You can also scan the QR code on the right, which will take you to the respective D-Link Wi-Fi app store page directly. Note: The screenshots may differ depending on your mobile devices OS version. The following steps show the Android interface of the D-Link Wi-Fi app. If you are using an iOS device, the appearance may differ from that of the screenshots, but the process is the same. D-Link Wi-Fi D-Link COVR-2202 User Manual 7 Section 2 - Installation Using The D-Link Wi-Fi App (Continued) 1. Open the D-Link Wi-Fi app and tap Install Your Device at the bottom. 2. Next, select COVR-2202 from the list and tap NEXT. D-Link COVR-2202 User Manual 8 Section 2 - Installation Using The D-Link Wi-Fi App (Continued) 3. When asked to create a new network, or add to an existing network, choose Create a new Covr network and tap NEXT. 4. You will now be guided through a step-by-step process for setting up the COVR-2202 hardware. Simply follow the on-screen instructions to complete the installation and Covr Wi-Fi configuration process. D-Link COVR-2202 User Manual 9 Section 2 - Installation If you do not wish to use the D-Link Wi-Fi app, you can manually set up the COVR-2202 and configure your Covr Wi-Fi network using the web-based user interface. Follow the instructions below to set up your COVR-2202 AC2200 Tri-Band Whole Home Wi-Fi System. Manual Installation 1. Position the Covr Point labeled A close to your Internet-connected modem. Next, connect the power adapter and plug the Covr Point into a power outlet. A G 2. Wait for Covr Point A to boot up. When the COVR LED starts blinking orange, wirelessly connect your PC or laptop to the Wi-Fi name (SSID) printed on the back of the device, or on the included Wi-Fi Configuration Card. Wi-Fi Wi-Fi SSID Password D-Link COVR-2202 User Manual 10 Section 2 - Installation Manual Installation (Continued) 3. Type http://covr.local./ into a web browser and follow the on-screen instructions to complete the setup. http://covr.local./

Your COVR-2202 AC2200 Tri-Band Whole Home Wi-Fi System is now set up and ready to use. You can now configure your Covr Wi-Fi settings using the free D-Link Wi-Fi mobile app or the web-based user interface. Refer to the Configuration section on page 12 for more information on configuring your network using the web-based user interface. D-Link COVR-2202 User Manual 11 Section 2 - Installation Configuration To access the web configuration utility, open a web browser such as Internet Explorer and enter http://covr.local./ in the address bar. If you want to access the web interface using a wireless connection, connect to your Covr Wi-Fi, then open a web browser such as Internet Explorer and enter http://covr.local./ in the address bar. Note: If you have previously changed the Management Link in the Network settings, use this link to access the web user interface instead. When prompted, enter your password. If you previously followed the setup wizard, please use the admin password you entered during the wizard. Otherwise, leave the password blank. Click Log In to proceed. Note: If you cannot remember your password and cannot log in, press the Reset button on the bottom of the device with an unfolded paper clip to restore the device to its default settings. Refer to Resetting your Device on page 76 for more information. When you are logged in, the device's home page will open, displaying its current connection status. The bar at the top of the page has quick access to Settings , Features, and Management functions. You may quickly jump back Home at any time. Note: The system will automatically log out after a period of inactivity. D-Link COVR-2202 User Manual 12 Section 3 - Configuration Home The Home page displays the current status of your Covr Wi-Fi network in the form of an interactive diagram. You can click each icon to display information about each part of the network at the bottom of the screen. The menu bar at the top of the page will allow you to quickly navigate to other pages. Refer to the following pages for a description of each section. D-Link COVR-2202 User Manual 13 Section 3 - Configuration Internet Click on the Internet icon to bring up more details about your Internet connection. Click IPv4 or IPv6 to see details of the IPv4 and IPv6 connection respectively. The Home page displays whether or not Covr Point A is currently connected to the Internet. If it is disconnected, click Click to repair to bring up the setup wizard, refer to Wizard on page 18 for more information. Click Release IP Address to release the current IP address and disconnect from the Internet. If you wish to reconnect the Internet, click Renew IP Address. To reconfigure the Internet settings, click Go to settings at the bottom-right. D-Link COVR-2202 User Manual 14 Section 3 - Configuration COVR-2200 Click on the COVR-2200 icon to view details about the Covr Point's wireless and local network settings. This includes IPv4 and IPv6 local network, and Wi-Fi information. This overview is only informational. To configure these sections, refer to the corresponding configuration sections in this manual. D-Link COVR-2202 User Manual 15 Section 3 - Configuration Connected Clients Click on the Connected Clients icon to view details about the clients currently connected to your Covr Wi-Fi network. To edit each clients settings, click the pencil icon on the client you want to edit. Name: Displays the name of this client. You can edit the client's name here. Vendor: Displays the vendor of the device. MAC Address: Displays the MAC address of the device. IP Address: Displays the current IP address of this client. Reserve IP: Enable to reserve an IP address for this client. IP Address

(Reserved):

Specify an IP address for the DHCP server to assign to this client. Parental Control: Enable or disable parental control to allow or block access to the network for this user. Schedule:

If Parental Control is enabled, use the drop-down menu to select the time schedule that the rule will be enabled for. The schedule may be set to Always Off, or you can create your own schedules in the Schedule section. Refer to Schedule on page 62 for more information. Click Save when you are done. D-Link COVR-2202 User Manual 16 Section 3 - Configuration Extenders Click on the Extenders icon to view details about all additional Covr Points in your Covr whole home Wi-Fi network. To edit a Covr Points name, click the pencil icon in the top-right of the box of the Covr Point that you want to rename. To reboot a Covr Point, click the settings icon in the bottom-right of the Covr Point's box and click Reboot. To remove a Covr Point from your Covr Wi-Fi network, click the settings icon in the bottom-right of the Covr Point's box and click Remove. Name: Enter a name for the Covr Point. MAC Address: Displays the MAC address of the Covr Point. Click Save when you are done. D-Link COVR-2202 User Manual 17 Section 3 - Configuration Settings Wizard In the Settings menu on the bar on the top of the page, click Wizard to open the setup wizard. This is the same wizard that appears when you set up the device using the web-user interface for the first time. This Wizard will also launch when clicking the Click to Repair button when no Internet connection is detected. Refer to Manual Installation on page 10 for more information. D-Link COVR-2202 User Manual 18 Section 3 - Configuration Internet IPv4 In the Settings menu on the bar on the top of the page, click Internet to see the Internet configuration options. My Internet Connection Is:

Choose your Internet connection type from the drop-down menu. You will be presented with the appropriate options for your connection type. Click Advanced Settings... to expand the list and see all of the options. For Dynamic IP (DHCP) refer to page 20. For Static IP refer to page 21. For PPPoE refer to page 22. For PPTP refer to page 24. For L2TP refer to page 26. For DS-Lite refer to page 28. To configure an IPv6 connection, click the IPv6 link. Refer to page 29. D-Link COVR-2202 User Manual 19 Section 3 - Configuration Dynamic IP (DHCP) Select Dynamic IP (DHCP) to obtain IP address information automatically from your Internet Service Provider (ISP). Select this option if your ISP does not specify an IP address to use. Advanced Settings Host Name: The host name is optional but may be required by some ISPs. Leave it blank if you are not sure. Primary DNS Server:

Enter the primary DNS server IP address assigned by your ISP. This address is usually obtained automatically from your ISP. Secondary DNS Server:

Enter the secondary DNS server IP address assigned by your ISP. This address is usually obtained automatically from your ISP. MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your ISP. MAC Address Clone:

The default MAC address is set to the physical interface MAC address of port 1 on Covr Point A. You can use the drop-down menu to replace the Internet ports MAC address with the MAC address of a connected client. Click Save when you are done. D-Link COVR-2202 User Manual 20 Section 3 - Configuration Static IP Select Static IP if your IP information is provided by your Internet Service Provider (ISP). IP Address: Enter the IP address provided by your ISP. Subnet Mask: Enter the subnet mask provided by your ISP. Default Gateway: Enter the default gateway address provided by your ISP. Primary DNS Server:

Enter the primary DNS server IP address assigned by your ISP. Advanced Settings Secondary DNS Server:

Enter the secondary DNS server IP address assigned by your ISP. MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your ISP. MAC Address Clone:

The default MAC address is set to the physical interface MAC address of port 1 on Covr Point A. You can use the drop-down menu to replace the Internet ports MAC address with the MAC address of a connected client. Click Save when you are done. D-Link COVR-2202 User Manual 21 Section 3 - Configuration PPPoE Select PPPoE if your ISP provides and requires you to enter a PPPoE username and password in order to connect to the Internet. Username: Enter the username provided by your ISP. Password: Enter the password provided by your ISP. Reconnect Mode: Select either Always on, On Demand, or Manual. Maximum Idle Time:

Enter a maximum idle time (in minutes) during which the Internet connection is maintained during inactivity. To disable this feature, select Always on as the reconnect mode. Advanced Settings Address Mode: Select Static IP if your ISP assigned you the IP address, subnet mask, gateway, and DNS server addresses. In most cases, select Dynamic IP. If you selected Dynamic IP as the Address Mode:

Service Name: Enter the ISP service name (optional). Primary DNS Server:

Enter the primary DNS server IP address assigned by your ISP. This address is usually obtained automatically from your ISP. Secondary DNS Server:

IP Address: Enter the IP address provided by your ISP. Service Name: Enter the ISP service name (optional). Primary DNS Server:

Secondary DNS Server:

Enter the primary DNS server IP address assigned by your ISP. Enter the secondary DNS server IP address assigned by your ISP. MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your ISP. MAC Address Clone:

The default MAC address is set to the physical interface MAC address of port 1 on Covr Point A. You can use the drop-down menu to replace the Internet ports MAC address with the MAC address of a connected client. Click Save when you are done. D-Link COVR-2202 User Manual 23 Section 3 - Configuration PPTP Choose PPTP (Point-to-Point-Tunneling Protocol ) if your Internet Service Provider (ISP) uses a PPTP connection. Your ISP will provide you with a username and password. PPTP Server: Enter the PPTP server IP address provided by your ISP. Username: Enter the username provided by your ISP. Password: Enter the password provided by your ISP. Reconnect Mode: Select either Always on, On demand, or Manual. Maximum Idle Time:

Enter a maximum idle (in minutes) time during which the Internet connection is maintained during inactivity. To disable this feature, select Always on as the reconnect mode. Advanced Settings Address Mode: Select Static IP if your ISP assigned you the IP address, subnet mask, gateway, and DNS server addresses. In most cases, select Dynamic IP. If you selected Dynamic IP as the Address Mode:

Primary DNS Server:

Enter the primary DNS server IP address assigned by your ISP. This address is usually obtained automatically from your ISP. Secondary DNS Server:

PPTP IP Address: Enter the IP address provided by your ISP. PPTP Subnet Mask:

PPTP Gateway IP Address:

Primary DNS Server:

Secondary DNS Server:

Enter the subnet mask provided by your ISP. Enter the gateway IP address provided by your ISP. Enter the primary DNS server IP address assigned by your ISP. Enter the secondary DNS server IP address assigned by your ISP. MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your ISP. Click Save when you are done. D-Link COVR-2202 User Manual 25 Section 3 - Configuration L2TP Choose L2TP (Layer 2 Tunneling Protocol) if your Internet Service Provider

(ISP) uses a L2TP connection. Your ISP will provide you with a username and password. L2TP Server: Enter the L2TP server IP address provided by your ISP. Username: Enter the username provided by your ISP. Password: Enter the password provided by your ISP. Reconnect Mode: Select either Always on, On demand, or Manual. Maximum Idle Time:

Primary DNS Server:

Enter the primary DNS server IP address assigned by your ISP. This address is usually obtained automatically from your ISP. Secondary DNS Server:

L2TP IP Address: Enter the IP address provided by your ISP. L2TP Subnet Mask:

L2TP Gateway IP Address:

Primary DNS Server:

Secondary DNS Server:

Enter the subnet mask provided by your ISP. Enter the gateway IP address provided by your ISP. Enter the primary DNS server IP address assigned by your ISP. Enter the secondary DNS server IP address assigned by your ISP. MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your ISP. Click Save when you are done. D-Link COVR-2202 User Manual 27 Section 3 - Configuration DS-Lite DS-Lite is an IPv6 connection type. After selecting DS-Lite, the following parameters will be available for configuration:

Advanced Settings DS-Lite Configuration:

Select DS-Lite DHCPv6 Option to let Covr Point A allocate the AFTR IPv6 address automatically. Select Manual Configuration to enter the AFTR IPv6 address manually. If you selected DS-Lite DHCPv6 Option as the DS-Lite Configuration:

B4 IPv6 Address: Enter the B4 IPv4 address value used here. WAN IPv6 Address:

Once connected, the WAN IPv6 address will be displayed here. IPv6 WAN Default Gateway:

Once connected, the IPv6 WAN default gateway address will be displayed here. If you selected Manual Configuration as the DS-Lite Configuration:

AFTR IPv6 Address:

Enter the AFTR IPv6 address used here. B4 IPv6 Address: Enter the B4 IPv4 address value used here. WAN IPv6 Address:

Once connected, the WAN IPv6 address will be displayed here. IPv6 WAN Default Gateway:

Once connected, the IPv6 WAN default gateway address will be displayed here. Click Save when you are done. D-Link COVR-2202 User Manual 28 Section 3 - Configuration IPv6 To configure an IPv6 connection, click the IPv6 link. To return to the IPv4 settings, click IPv4. My Internet Connection Is:

Choose your IPv6 connection type from the drop-down menu. You will be presented with the appropriate options for your connection type. Click Advanced Settings... to expand the list and see all of the options. For Auto Detection refer to page 30. For Static IPv6 refer to page 32. For Auto Configuration (SLAAC/DHCPv6) refer to page 34. For PPPoE refer to page 36. For 6rd refer to page 39. For Local Connectivity Only refer to page 41. D-Link COVR-2202 User Manual 29 Section 3 - Configuration Auto Detection Select Auto Detection to automatically detect the IPv6 connection method used by your Internet Service Provider (ISP). If Auto Detection fails, you can manually select another IPv6 connection type. IPv6 DNS Settings DNS Type: Select either Obtain DNS server address automatically or Use the following DNS address. If Use the following DNS address is selected:

Primary DNS Server:

Secondary DNS Server:

Enter the primary DNS server address. Enter the secondary DNS server address. LAN IPv6 Address Settings Enable DHCP-PD: Enable or disable DHCP Prefix Delegation. LAN IPv6 Link-

Local Address:

Displays Covr Point A's LAN link-local address. If Enable DHCP-PD is disabled, these additional parameters are available for configuration:

LAN IPv6 Address: Enter a valid LAN IPv6 address. LAN IPv6 Link-

Local Address:

Displays Covr Point A's LAN link-local address. D-Link COVR-2202 User Manual 30 Section 3 - Configuration Auto Detection (Continued) Advanced Settings - Address Autoconfiguration Settings Enable Automatic IPv6 Address Assignment:

Enable Automatic DHCP-PD in LAN:

Autoconfiguration Type:

Enable or disable the Automatic IPv6 Address Assignment feature. Enabling this feature presents additional configuration options. Enable or disable DHCP-PD for other IPv6 routers connected to the LAN interface. This option is only available if Enable DHCP-PD is enabled. Note: This feature requires a smaller subnet prefix than /64 (i.e. allowing for a larger address allocation), such as /63. Contact your ISP for more information. Select SLAAC+RDNSS, SLAAC+Stateless DHCP, or Stateful DHCPv6. If you selected SLAAC+RDNSS or SLAAC+Stateless DHCP as the Autoconfiguration Type:

Router Advertisement Lifetime:

Enter the router advertisement lifetime (in minutes). If you selected Stateful DHCPv6 as the Autoconfiguration Type:

IPv6 Address Range (Start):

IPv6 Address Range (End):

Enter the starting IPv6 address for the DHCP servers IPv6 assignment. Enter the ending IPv6 address for the DHCP servers IPv6 assignment. IPv6 Address Lifetime:

If Enable DHCP-PD is disabled, enter the IPv6 address lifetime (in minutes). Click Save when you are done. D-Link COVR-2202 User Manual 31 Section 3 - Configuration Static IPv6 Select Static IP if your IPv6 information is provided by your Internet Service Provider (ISP). Use Link-Local Address:

Enable or disable link-local address use. Enabling this feature will use your local IPv6 address as the static IP. Disable this feature to manually enter your static IPv6 address and subnet prefix length. IPv6 Address:

If Use Link-Local Address is disabled, enter the address supplied by your ISP. Subnet Prefix Length:

If Use Link-Local Address is disabled, enter the subnet prefix length supplied by your ISP. Default Gateway: Enter the default gateway for your IPv6 connection. Primary DNS Server:

Secondary DNS Server:

Enter the primary DNS server address. Enter the secondary DNS server address. LAN IPv6 Address Settings LAN IPv6 Address: Enter the LAN (local) IPv6 address for Covr Point A. LAN IPv6 Link-

Local Address:

Displays Covr Point A's LAN link-local address. D-Link COVR-2202 User Manual 32 Section 3 - Configuration Static IPv6 (Continued) Advanced Settings - Address Autoconfiguration Settings Enable Automatic IPv6 Address Assignment:

Autoconfiguration Type:

Enable or disable the Automatic IPv6 Address Assignment feature. Select SLAAC+RDNSS, SLAAC+Stateless DHCP, or Stateful DHCPv6. If you selected SLAAC+RDNSS or SLAAC+Stateless DHCP as the Autoconfiguration Type:

Router Advertisement Lifetime:

Enter the router advertisement lifetime (in minutes). If you selected Stateful DHCPv6 as the Autoconfiguration Type:

IPv6 Address Range (Start):

IPv6 Address Range (End):

IPv6 Address Lifetime:

Enter the starting IPv6 address for the DHCP servers IPv6 assignment. Enter the ending IPv6 address for the DHCP servers IPv6 assignment. Enter the IPv6 address lifetime (in minutes). Click Save when you are done. D-Link COVR-2202 User Manual 33 Section 3 - Configuration Auto Configuration (SLAAC/DHCPv6) Select Auto Configuration if your ISP assigns your IPv6 address when your router requests one from the ISPs server. Some ISPs require you to adjust settings on your side before your router can connect to the IPv6 Internet. IPv6 DNS Settings DNS Type: Select either Obtain DNS server address automatically or Use the following DNS address. If Use the following DNS address is selected:

Primary DNS Server:

Secondary DNS Server:

Enter the primary DNS server address. Enter the secondary DNS server address. LAN IPv6 Address Settings Enable DHCP-PD: Enable or disable prefix delegation services. LAN IPv6 Link-

Local Address:

Displays Covr Point A's LAN link-local address. If Enable DHCP-PD is disabled, these additional parameters are available for configuration:

LAN IPv6 Address: Enter a valid LAN IPv6 address. LAN IPv6 Link-

Local Address:

Displays Covr Point A's LAN link-local address. D-Link COVR-2202 User Manual 34 Section 3 - Configuration Auto Configuration (SLAAC/DHCPv6) (Continued) Advanced Settings - Address Autoconfiguration Settings Enable Automatic IPv6 Address Assignment:

Enable Automatic DHCP-PD in LAN:

Autoconfiguration Type:

Router Advertisement Lifetime:

Enter the router advertisement lifetime (in minutes). If you selected Stateful DHCPv6 as the Autoconfiguration Type:

IPv6 Address Range (Start):

IPv6 Address Range (End):

Enter the starting IPv6 address for the DHCP servers IPv6 assignment. Enter the ending IPv6 address for the DHCP servers IPv6 assignment. IPv6 Address Lifetime:

If Enable DHCP-PD is disabled, enter the IPv6 address lifetime (in minutes). Click Save when you are done. D-Link COVR-2202 User Manual 35 Section 3 - Configuration PPPoE Select PPPoE if your ISP provides and requires you to enter a PPPoE username and password in order to connect to the Internet. PPPoE Session: Select Create a new session to start a new PPPoE session. Username: Enter the username provided by your ISP. Password: Enter the password provided by your ISP. Address Mode: Select Static IP if your ISP assigned you an IP address. In most cases, select Dynamic IP. IP Address:

If you selected Static IP as the Address Mode, enter the IP address provided by your ISP. Service Name: Enter the ISP service name (optional). Reconnect Mode: Select either Always On or Manual. MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your ISP. D-Link COVR-2202 User Manual 36 Section 3 - Configuration PPPoE (Continued) IPv6 DNS Settings DNS Type: Select either Obtain DNS server address automatically or Use the following DNS address. If Use the following DNS address is selected:

Primary DNS Server:

Secondary DNS Server:

Enter the primary DNS server address. Enter the secondary DNS server address. LAN IPv6 Address Settings Enable DHCP-PD: Enable or disable prefix delegation services. LAN IPv6 Link-

Local Address:

Displays Covr Point A's LAN link-local address. If Enable DHCP-PD is disabled, these additional parameters are available for configuration:

LAN IPv6 Address: Enter a valid LAN IPv6 address. LAN IPv6 Link-

Local Address:

Displays Covr Point A's LAN link-local address. D-Link COVR-2202 User Manual 37 Section 3 - Configuration PPPoE (Continued) Advanced Settings - Address Autoconfiguration Settings Enable Automatic IPv6 Address Assignment:

Enable Automatic DHCP-PD in LAN:

Autoconfiguration Type:

Router Advertisement Lifetime:

Enter the router advertisement lifetime (in minutes). If you selected Stateful DHCPv6 as the Autoconfiguration Type:

IPv6 Address Range (Start):

IPv6 Address Range (End):

Enter the starting IPv6 address for the DHCP servers IPv6 assignment. Enter the ending IPv6 address for the DHCP servers IPv6 assignment. IPv6 Address Lifetime:

If Enable DHCP-PD is disabled, enter the IPv6 address lifetime (in minutes). Click Save when you are done. D-Link COVR-2202 User Manual 38 Section 3 - Configuration In this section the user can configure the IPv6 6rd connection settings. 6rd Assign IPv6 Prefix: Currently unsupported. Primary DNS Server:

Secondary DNS Server:

Enter the primary DNS server address. Enter the secondary DNS server address. 6rd Manual Configuration Enable Hub and Spoke Mode:

Enable this feature to minimize the number of routes to the destination by using a hub and spoke method of networking. 6rd Configuration: Choose the 6rd DHCPv4 Option to automatically discover and populate the data values, or choose Manual Configuration to enter the settings yourself. If you selected Manual Configuration as the 6rd Configuration:

6rd IPv6 Prefix: Enter the 6rd IPv6 prefix and mask length supplied by your ISP. WAN IPv4 Address:

6rd Border Relay IPv4 Address:

Displays Covr Point A's IPv4 address. Enter the 6rd border relay IPv4 address settings supplied by your ISP. LAN IPv6 Address Settings LAN IPv6 Address: Displays Covr Point A's LAN IPv6 Address link-local address. LAN IPv6 Link-

Local Address:

Displays Covr Point A's LAN link-local address. D-Link COVR-2202 User Manual 39 Section 3 - Configuration 6rd (Continued) Advanced Settings - Address Autoconfiguration Settings Enable Automatic IPv6 Address Assignment:

Autoconfiguration Type:

Router Advertisement Lifetime:

Enter the router advertisement lifetime (in minutes). If you selected Stateful DHCPv6 as the Autoconfiguration Type:

IPv6 Address Range (Start):

IPv6 Address Range (End):

IPv6 Address Lifetime:

Enter the starting IPv6 address for the DHCP servers IPv6 assignment. Enter the ending IPv6 address for the DHCP servers IPv6 assignment. Enter the IPv6 address lifetime (in minutes). Click Save when you are done. D-Link COVR-2202 User Manual 40 Section 3 - Configuration Local Connectivity Only Local Connectivity Only allows you to set up an IPv6 connection that will not connect to the Internet. Advanced Settings - IPv6 ULA Settings Enable ULA: Click here to enable Unique Local IPv6 Unicast Addresses settings. Use Default ULA Prefix:

Enable this option to use the default ULA prefix. If you selected Enable ULA and disabled Default ULA Prefix:

ULA Prefix: Enter your own ULA prefix. Current IPv6 ULA Settings Current ULA Prefix:

Displays the current ULA prefix. LAN IPv6 ULA: Displays the LAN's IPv6 ULA. Click Save when you are done. D-Link COVR-2202 User Manual 41 Section 3 - Configuration VLAN A Virtual Local Area Network (VLAN) is sometimes used for services such as Triple-Play, and divides a network into segments that can only be accessed by other devices in the same VLAN. In the Settings menu on the bar on the top of the page, click Internet, then click the VLAN link. Triple-Play Status: Click to enable or disable the Triple-Play VLAN feature. Priority ID: Enable or disable traffic priority ID for the Internet, IPTV, and VOIP VLANs. Higher priority ID traffic takes precedence over traffic with a low priority ID tag. If Status is enabled:

Internet VLAN ID: Enter the VLAN ID for your Internet connection provided by your ISP. IPTV VLAN ID: Enter the VLAN ID for your digital cable provided by your ISP. VOIP VLAN ID: Enter the VLAN ID for your Voice over IP network provided by your ISP. If Priority ID is enabled:

Priority ID: Select a priority ID from the drop-down menu to assign to the corresponding VLAN. D-Link COVR-2202 User Manual 42 Section 3 - Configuration VLAN (Continued) Interface Traffic Type Setting LAN Port 1: From the drop-down menu, select the VLAN for LAN port 1. Click Save when you are done. D-Link COVR-2202 User Manual 43 Section 3 - Configuration From this page you can configure your Covr Wi-Fi settings. Covr Wi-Fi System Wireless Wi-Fi Status:

Indicates the status of the seamless Covr Wi-Fi system. This feature cannot be disabled. MU-MIMO:

Click to enable or disable Multi-User Multiple Input Multiple Output

(MU-MIMO). Enabling this feature will allow the Covr Points to communicate with multiple devices at once for faster and more efficient throughput. It is recommend to leave this feature enabled. Advanced Settings Wi-Fi Name (SSID): Enter a name for your Covr Wi-Fi network. Password: Create a password for your Covr Wi-Fi network. Wireless clients will need to enter this password to successfully connect to the network. Schedule: Use the drop-down menu to select the time schedule that the rule will be enabled on. The schedule may be set to Always Enable, or you can create your own schedules in the Schedule section. Refer to Schedule on page 62 for more information. D-Link COVR-2202 User Manual 44 Section 3 - Configuration Wi-Fi (Continued) Wi-Fi Protected Setup The easiest way to connect your wireless devices to your Covr Points is with Wi-Fi Protected Setup (WPS). WPS-PBC Status: Enable or disable WPS Push Button Configuration (PBC) functionality. Enabling this feature allows wireless clients to connect to the Covr Wi-Fi through an encrypted connection by using the WPS button. Click Save when you are done. D-Link COVR-2202 User Manual 45 Section 3 - Configuration Guest Zone The Guest Zone feature will allow you to create a temporary wireless network that can be used by guests to access the Internet. This zone will be separate from your main Covr Wi-Fi network. In the Settings menu on the bar on the top of the page, click Wireless, then click the Guest Zone link. Covr Wi-Fi System Status: Enable or disable the Covr Guest Wi-Fi network. Wi-Fi Name (SSID): Enter a name for your guest wireless network. Password: Create a password for your guest Wi-Fi network. Wireless clients will need to enter this password to successfully connect to the network. Schedule: Use the drop-down menu to select the time schedule that the rule will be enabled on. The schedule may be set to Always Enable, or you can create your own schedules in the Schedule section. Refer to Schedule on page 62 for more information. Home Network Access Internet Access Only:

Enabling this option will confine connectivity to the Internet, preventing guests from accessing other local network devices. Click Save when you are done. D-Link COVR-2202 User Manual 46 Section 3 - Configuration Network This section will allow you to change the local network settings of Covr Point A and configure the DHCP settings. In the Settings menu on the bar on the top of the page, click Network. Click Advanced Settings... to expand the list and see all of the options. Network Settings LAN IP Address: Enter the IP address of Covr Point A. The default IP address is 192.168.0.1. If you change the IP address, once you click Save, you will need to enter the new IP address in your browser to get back into the configuration utility. Subnet Mask: Enter the subnet mask of the router. The default subnet mask is 255.255.255.0. Management Link:

The default address to access the web configuration utility is http://covr.local/ Here, you can replace "covr" with a different name. If you change the management link, you will be required to browse to the new URL in order to access the web UI. Local Domain Name:

Enter the domain name (optional). Enable DNS Relay: Disable to transfer the DNS server information from your ISP to your computers. If enabled, your computers will use Covr Point A for a DNS server. D-Link COVR-2202 User Manual 47 Section 3 - Configuration Network (Continued) DHCP Server Status: Enable or disable the DHCP server. DHCP IP Address Range:

Enter the starting and ending IP addresses for the DHCP servers IP assignment. Note: If you have reserved static IP addresses to client devices, make sure the IP addresses are outside of this range or you might have an IP conflict. Refer to Connected Clients section page 16 for how reserve IP addresses for clients. DHCP Lease Time: Enter the length of time for the IP address lease (in minutes). Always Broadcast: Enable this feature to broadcast your network's DHCP server to LAN/

WLAN clients. Advanced Settings WAN Port Speed: You may set the port speed of the Internet port to 10 Mbps, 100 Mbps, 1000 Mbps, or Auto (recommended). UPnP: Enable or disable Universal Plug and Play (UPnP). UPnP provides compatibility with networking equipment, software, and peripherals. IPv4 Multicast Streams:

Enable to allow IPv4 multicast traffic to pass through Covr Point A from the Internet. IPv6 Multicast Streams:

Enable to allow IPv6 multicast traffic to pass through Covr Point A from the Internet. Click Save when you are done. D-Link COVR-2202 User Manual 48 Section 3 - Configuration Advanced QoS Engine This Quality of Service (QoS) Engine will allow you to prioritize particular clients over others, so that those clients receive higher bandwidth. For example, if one client is streaming a movie and another is downloading a non-urgent file, you might wish to assign the former device to a higher priority than the latter so that the movie streaming is not disrupted by the traffic of the other devices on the network. In the Advanced menu on the bar on the top of the page, click QoS Engine. Management Type:

From the drop-down menu, select Off to disable or select Manage by Device to enable the Quality of Service (QoS) feature. Download Speed

(Mbps):

Enter the maximum download speed (in Mbps) for connected clients. If QoS is enabled, clients will not be able to exceed this value. Upload Speed

(Mbps):

Enter the maximum upload speed (in Mbps) for all connected clients combined. If QoS is enabled, once this threshold is reached, traffic of clients with higher priority will be processed first, while traffic of lower priority clients will wait until enough bandwidth becomes available. D-Link COVR-2202 User Manual 49 Section 3 - Configuration QoS Engine (Continued) Under Connected Clients, you will see device cards representing each connected client. If some are off-screen, you can use the < and > buttons to scroll through the cards. A maximum of one device can be assigned Highest priority. A maximum of two devices can be assigned High priority. A maximum of eight devices can be assigned Medium priority. If no devices are explicitly assigned with any priority, they will all be treated with equal priority. If some devices are not assigned with any priority and others are, the unassigned devices will be treated a devices with the lowest priority. To assign a priority level to a device, drag the device card from the Connected Clients list over an empty slot and release the mouse button. The card will remain in the slot. If you want to remove a priority assignment from a device and return it to the Connected Clients list, click the close button (x) in the top right of the device card. Click Save when you are done. D-Link COVR-2202 User Manual 50 Section 3 - Configuration Firewall Advanced The integrated firewall helps protect your network from malicious attacks over the Internet. In the Features menu on the bar on the top of the page, click Firewall Settings. Click Advanced Settings... to expand the list and see all of the options. Enable DMZ: Enable or disable Demilitarized Zone (DMZ). This completely exposes the client to threats over the Internet, and is not recommended in ordinary situations. DMZ IP Address:

If you enabled DMZ, enter the IP address of the client you wish to expose, or use the drop-down menu to quickly select it. Enable SPI IPv4: Enabling Stateful Packet Inspection (SPI) helps to prevent cyber attacks by verifying that the traffic passing through the session conforms to known protocols. Enable Anti-Spoof Checking:

Enable this feature to protect your network from certain kinds of spoofing attacks. IPv6 Simple Security:

IPv6 Ingress Filtering:

Enable or disable IPv6 simple security. Enable or disable IPv6 ingress filtering. D-Link COVR-2202 User Manual 51 Section 3 - Configuration Advanced (Continued) Advanced Settings - Application Level Gateway (ALG) Configuration PPTP: Allows multiple machines on the LAN to connect to their corporate network using the PPTP protocol. IPSec (VPN): Allows multiple VPN clients to connect to their corporate network using IPSec. Some VPN clients support traversal of IPSec through NAT. This Application Level Gateway (ALG) may interfere with the operation of such VPN clients. If you are having trouble connecting with your corporate network, try turning this ALG off. Please check with the system administrator of your corporate network whether your VPN client supports NAT traversal. RTSP: Allows applications that uses Real Time Streaming Protocol (RTSP) to receive streaming media from the Internet. SIP: Allows devices and applications using VoIP (Voice over IP) to communicate across NAT. Some VoIP applications and devices have the ability to discover NAT devices and work around them. This ALG may interfere with the operation of such devices. If you are having trouble making VoIP calls, try turning this ALG off. Click Save when you are done. D-Link COVR-2202 User Manual 52 Section 3 - Configuration IPv4/IPv6 Rules The IPv4/IPv6 Rules section is an advanced option that lets you configure what kind of traffic is allowed to pass through the network. To configure the IPv4 rules, from the Firewall Settings page click IPv4 Rules. To configure IPv6 rules, from the Firewall Settings page click IPv6 Rules. To return to the main Firewall Settings page, click Advanced. To begin, use the drop-down menu to select whether you want to ALLOW or DENY the rules you create. You can also choose to turn filtering OFF. If you wish to remove a rule, click on its trash can icon in the Delete column. If you wish to edit a rule, click on its pencil icon in the Edit column. If you wish to create a new rule, click the Add Rule button. Click Save when you are done. If you edit or create a rule, the following options will appear:

Name: Enter a name for the rule. Source IP Address Range:

Enter the source IP address range that the rule will apply to, and using the drop-down menu, specify whether it is a WAN or LAN IP address. Destination IP Address Range:

Enter the destination IP address range that the rule will apply to, and using the drop-down menu, specify whether it is a WAN or LAN IP address. Protocol & Port Range:

Select the protocol of the traffic to allow or deny (Any, TCP, or UDP) and then enter the range of ports that the rule will apply to. Schedule: Use the drop-down menu to select the time schedule that the rule will be enabled on. The schedule may be set to Always Enable, or you can create your own schedules in the Schedule section. Refer to Refer to Schedule on page 62 for more information. Click Apply when you are done. D-Link COVR-2202 User Manual 53 Section 3 - Configuration Port Forwarding Port Forwarding Port forwarding allows you to specify a port or range of ports to forward to specific devices on the network. This might be necessary for certain applications to connect through Covr Point A. In the Features menu on the bar on the top of the page, click Port Forwarding. If you wish to remove a rule, click on its trash can icon in the Delete column. If you wish to edit a rule, click on its pencil icon in the Edit column. If you wish to create a new rule, click the Add Rule button. Click Save when you are done. If you edit or create a rule, the following options will appear:

Name: Enter a name for the rule. Local IP: Enter the IP address of the device on your local network to which the port will be forwarded. Alternatively, select the device from the drop-down menu. TCP Port: Enter the TCP ports that you want to forward. You can enter a single port or a range of ports. Separate ports with a comma (for example:

24,1009,3000-4000). UDP Port: Enter the UDP ports that you want to forward. You can enter a single port or a range of ports. Separate ports with a comma (for example:

24,1009,3000-4000). Schedule: Use the drop-down menu to select the time schedule that the rule will be enabled on. The schedule may be set to Always Enable, or you can create your own schedules in the Schedule section. Refer to Schedule on page 62 for more information. Click Apply when you are done. D-Link COVR-2202 User Manual 54 Section 3 - Configuration Virtual Server The virtual server allows you to specify a single public port on Covr Point A for redirection to an internal LAN IP address and Private LAN port. To configure the virtual server, from the Port Forwarding page click Virtual Server. To return to the main Port Forwarding page, click Port Forwarding. If you wish to remove a rule, click on its trash can icon in the Delete column. If you wish to edit a rule, click on its pencil icon in the Edit column. If you wish to create a new rule, click the Add Rules button. Click Save when you are done. If you edit or create a rule, the following options will appear:

Name: Enter a name for the rule. Alternatively, select the protocol/Application from the drop-down menu. Local IP: Enter the IP address of the device on your local network to which the external port will forward. Alternatively, select the device from the drop-down menu. Protocol: Select the protocol of the traffic that will be forwarded to the selected IP address (TCP, UDP, Both, or Other). Protocol Number:

If you selected Other as the protocol, enter the protocol number. External Port:

If you selected TCP, UDP, or Both as the protocol, enter the public port you want to forward. Internal Port:

If you selected TCP, UDP, or Both as the protocol, enter the private port you want to open. Schedule: Use the drop-down menu to select the time schedule that the rule will be enabled on. The schedule may be set to Always Enable, or you can create your own schedules in the Schedule section. Refer to Schedule on page 62 for more information. Click Apply when you are done. D-Link COVR-2202 User Manual 55 Section 3 - Configuration Website Filter The website filter settings allow you to control access to certain web sites. You can either create a list of sites to block, or create a list of sites to allow (with all other sites being blocked). In the Features menu on the bar on the top of the page, click Website Filter. If you want to create a list of sites to block, select DENY client access to ONLY these sites from the drop-down menu. All other sites will be accessible. If you want to specify a list of sites to allow, select ALLOW clients access to ONLY these sites from the drop-down menu. All other sites will be blocked. To add a new site to the list, click Add Rule. Next, under Website URL/Domain enter the URL or domain. If you wish to remove a rule, click on its trash can icon in the Delete column. If you wish to edit a rule, simply replace the URL or domain. Click Save when you are done. D-Link COVR-2202 User Manual 56 Section 3 - Configuration The Static Routes section allows you to define custom routes to control how traffic moves around your network. Static Routes IPv4 In the Features menu on the bar on the top of the page, click Static Routes. To configure IPv6 rules, click IPv6 and refer to IPv6 on page 58. To return to the main IPv4 static routes page, click IPv4. If you wish to remove a rule, click on its trash can icon in the Delete column. If you wish to edit a rule, click on its pencil icon in the Edit column. If you wish to create a new rule, click the Add Route button. Click Save when you are done. If you edit or create a rule, the following options will appear:

Name: Enter a name for the route. Destination Network:

Enter the destination IP address of this route. Mask: Enter the subnet mask of the route. Gateway: Enter your next hop gateway to be taken if this route is used. Metric: The route metric is a value from 1 to 16 that indicates the cost of using this route. A value of 1 is the lowest cost and 16 is the highest cost. Interface: Select the interface that the IP packet must use to transit out of the router when this route is used. Click Apply when you are done. D-Link COVR-2202 User Manual 57 Section 3 - Configuration IPv6 To configure IPv6 routes, on the Static Routes page click IPv6. To return to the main IPv4 static routes page, click IPv4. If you wish to remove a rule, click on its trash can icon in the Delete column. If you wish to edit a rule, click on its pencil icon in the Edit column. If you wish to create a new rule, click the Add Rules button. Click Save when you are done. If you edit or create a rule, the following options will appear:

Name: Enter a name for the route. DestNetwork: This is the IP address of the router used to reach the specified destination. PrefixLen: Enter the IPv6 address prefix length of the packets that will take this route. Gateway: Enter your next hop gateway to be taken if this route is used. Metric: The route metric is a value from 1 to 16 that indicates the cost of using this route. A value of 1 is the lowest cost and 16 is the highest cost. Interface: Select the interface that the IP packet must use to transit out of the router when this route is used. Click Apply when you are done. D-Link COVR-2202 User Manual 58 Section 3 - Configuration Dynamic DNS Most Internet Service Providers (ISPs) assign dynamic (changing) IP addresses. Using a dynamic DNS service provider, people can enter your domain name in their web browser to connect to your server no matter what your IP address is. In the Features menu on the bar on the top of the page, click Dynamic DNS. Enable Dynamic DNS:

Enable or disable dynamic DNS. Enabling this feature will reveal further configuration options. Status: Displays the current dynamic DNS connection status. Server Address: Select a Dynamic DNS server from the drop-down menu, or select Manual to manually enter a DDNS server address. Host Name: Enter the host name that you registered with your dynamic DNS service provider. User Name: Enter your dynamic DNS username. Password: Enter your dynamic DNS password. Time Out: Enter a timeout time (in hours). Click Save when you are done. At the bottom of the page are the IPv6 host settings. To configure an IPv6 dynamic DNS host, refer to following page. D-Link COVR-2202 User Manual 59 Section 3 - Configuration Dynamic DNS (Continued) The IPv6 host settings are found at the bottom of the Dynamic DNS page. If you wish to remove a rule, click on its trash can icon in the Delete column. If you wish to edit a rule, click on its pencil icon in the Edit column. If you wish to create a new rule, click the Add Record button. Click Save when you are done. If you edit or create a rule, the following options will appear:

Host Name: Enter the host name that you registered with your dynamic DNS service provider. IPv6 Address: Enter the IPv6 address of the dynamic DNS server. Alternatively, select the server device in the drop-down menu. Click Apply when you are done. D-Link COVR-2202 User Manual 60 Section 3 - Configuration Management Time & Schedule Time The Time page allows you to configure, update, and maintain the correct time on the internal system clock. From here you can set the time zone, the Network Time Protocol (NTP) server, and enable or disable daylight saving time. In the Management menu on the bar on the top of the page, click Time &

Schedule. Time Configuration Time Zone: Select your time zone from the drop-down menu. Time: Displays the current date and time of the extender. Enable Daylight Saving:

Enable or disable daylight saving time. Automatic/Manual Time Configuration Update Time Using an NTP Server:

Enable or disable to allow an NTP server on the Internet to synchronize the time and date with your extender. If you enable this option, select an NTP server from the drop-down menu. To configure the Covr Point's time and date manually, disable this option and use the drop-down menus that appear to input the time and date. Click Save when you are done. D-Link COVR-2202 User Manual 61 Section 3 - Configuration Schedule Some functions can be controlled through a pre-configured schedule. To create, edit, or delete schedules, from the Time page click Schedule. To return to the Time page, click Time. If you wish to remove a rule, click on its trash can icon in the Delete column. If you wish to edit a rule, click on its pencil icon in the Edit column. If you wish to create a new rule, click the Add Device button. Click Save when you are done. If you edit or create a rule, the following screen will appear:

First, enter the name of your schedule in the Name field. Each box represents one hour, with the time at the top of each column and the day of the week to the left of each row. To add a time period to the schedule, simply click on the starting hour and drag to the ending hour. You can add multiple days to the schedule, but only one time period per day. To remove a time period from the schedule, click on the cross icon at the end of the highlighted section. Click Apply when you are done. D-Link COVR-2202 User Manual 62 Section 3 - Configuration System Log Covr Point A keeps a running log of events. This log can be sent to a Syslog server, or be sent to your email address. In the Management menu on the bar on the top of the page, click System Log. Log Settings System Log: Click the Check System Log to download a copy of the system log to your hard drive. SysLog Settings Enable Logging to Syslog Server:

Check this box to send the Covr Point logs to a SysLog Server. If Logging to the Syslog Server is Enabled:

Syslog Server IP Address:

Enter the IP address for the Syslog server. If the Syslog server is connected to Covr Point A, select it from the drop-down menu to automatically populate the field. Email Settings Enable E-mail Notification:

Enable this option if you want the logs to be automatically sent to an email address. If E-mail notification is Enabled:

From E-mail Address:

Enter the email address your SysLog messages will be sent from. To E-mail Address: Enter the email address your SysLog messages will be sent to. D-Link COVR-2202 User Manual 63 Section 3 - Configuration System Log (Continued) SMTP Server Address:

Enter your SMTP server address. SMTP Server Port: Enter your SMTP server port. Enable Authentication:

Enable this option if your SMTP server requires authentication. Account Name: Enter your SMTP account name. Password: Enter your SMTP account password. E-mail Log When Full or On Schedule Send When Log Full:

If enabled, this option will set Covr Point A to automatically send the log when it is full. Send on Schedule:

If enabled, this option will set Covr Point A to send the log according to a set schedule. Schedule:

If you enable Send On Schedule, use the drop-down menu to select a schedule to apply. The schedule may be set to Always, or you can create your own schedules in the Schedule section. Refer to Schedule on page 62 for more information. Click Save when you are done. D-Link COVR-2202 User Manual 64 Section 3 - Configuration System Admin Admin This page will allow you to change the administrator (Admin) password and enable the HTTPS server. In the Management menu on the bar on the top of the page, click System Admin. Admin Password Password: Enter a new password for the administrator account. You will need to enter this password whenever you configure Covr Point A using a web browser. Enable Graphical Authentication

(CAPTCHA):

Enables a challenge-response test to require users to type letters or numbers from a distorted image displayed on the screen to help prevent online hackers and unauthorized users from access to your network. Advanced Settings - Administration Enable HTTPS Server:

Check to enable HTTPS to connect to the extender securely. Instead of using http://covr.local./, you must use https://covr.local./ in order to connect to Covr Point A. Note: If you previously changed the management link in the Network section, replace covr.local./ with the new management link. Enable Remote Management:

Remote management allows Covr Point A to be configured from the Internet by a web browser. A password is still required to access the web management interface. Enable Admin Port:

The port number used in the URL to access Covr Point A. Example: http://x.x.x.x:8080 where x.x.x.x is the Internet IP address of Covr Point A and 8080 is the port used for the web management interface. Note: If you enabled Use HTTPS and wish to access Covr Point A remotely and securely, you must enter https:// at the beginning of the address. D-Link COVR-2202 User Manual 65 Section 3 - Configuration Admin (Continued) Advanced Settings - LED Control Status LED: Choose to enable or disable the COVR status indicator LED on the top panel. When disabled, the LED will no longer light up solid white during normal operation and will instead turn off. The LED will still light up in the corresponding color and mode in any of the following circumstances:

-Firmware upgrade

-Device reboot

-Establishing a WPS connection

-Weak uplink signal

-No uplink signal Once any of the above situations has ended, the LED will briefly light up solid white and then turn off again. Click Save when you are done. D-Link COVR-2202 User Manual 66 Section 3 - Configuration System This page will allow you to backup, restore configuration settings, or restore settings from a previous backup, reset, and set up a reboot schedule for the device. On the System Admin page click System. System Save Settings To Local Hard Drive:

Click Save to download a backup of your current configuration settings to your local hard drive. This backup can later be used to restore your settings. Load Settings From Local Hard Drive:

Click Select File to browse your local hard drive for a configuration file to restore your configuration settings from. Once selected, click Restore to apply the settings from the configuration backup. Restore To Factory Default Settings:

Click Restore to restore all configuration settings back to the settings that were in effect at the time the device was shipped from the factory. Any settings that have not been saved will be lost, including any rules that you have created. Auto Reboot Configuration Reboot the Device:

Click the Reboot to reboot the device immediately. Auto Reboot: Use the drop-down menu to select a schedule for the device to automatically reboot. The schedule may be set to Never, Daily, or Weekly. Depending on your selection, set a time and date for the auto reboot schedule. Click Save when you are done. D-Link COVR-2202 User Manual 67 Section 3 - Configuration Upgrade This page will allow you to upgrade the extenders firmware, either automatically or manually. To manually upgrade the firmware, you must first download the newest firmware file from http://support.dlink.com. In the Management menu on the bar on the top of the page, click Upgrade. Firmware Information Current Firmware Version/Date:

Displays the current firmware version and date for Covr Point A (master) and any additional Covr Points unit (extender). Check for New Firmware:

Click this button to prompt the extender to automatically check for a new firmware version. If a newer version is found, click Upgrade Firmware to download and install the new firmware. Upgrade Manually Upgrade Firmware:

If you wish to upgrade manually, first download the firmware file you wish to upgrade to. Next, select a device from the drop-down menu to upgrade firmware for. Then, click the Select File button and browse to the firmware file you want to install. With the file selected, click Upload to begin the upgrade process. D-Link COVR-2202 User Manual 68 Section 3 - Configuration Statistics On the Statistics page you can view the amount of packets that pass through your Covr Wi-Fi network. In the Management menu on the bar on the top of the page, click Statistics. You can view the Internet, LAN, Wi-Fi 2.4GHz, and Wi-Fi 5GHz by clicking on the respective tabs at the top of the graph. The graph will update in real time. To clear the information on the graph, click Clear. The traffic counter will reset if the device is rebooted. D-Link COVR-2202 User Manual 69 Section 3 - Configuration Adding Additional Covr Points Covr is a scalable solution. You can add additional Covr Points at any time to increase coverage in your home whenever you need to. Adding more Covr Points is a quick and easy process. You can add up to 4 additional units, for a combined total of 6 Covr Points. Using the D-Link Wi-Fi App You can easily add additional units using your mobile device or tablet. Refer to the steps below to learn how to add more Covr Points to your Covr network using the D-Link Wi-Fi app. 1. Open the D-Link Wi-Fi app, then tap the menu icon in the top-left to open the app menu. D-Link COVR-2202 User Manual 70 Section 4 - Adding Additional Extenders Using the D-Link Wi-Fi App (Continued) 2. From the app menu, tap Install Your Device. 3. Next, select COVR-2202 from the list and tap NEXT. D-Link COVR-2202 User Manual 71 Section 4 - Adding Additional Extenders Using the D-Link Wi-Fi App (Continued) 4. When asked to create a new network, or add to an existing network, choose Add to existing Covr network and tap NEXT. 5. You will now be guided through a step-by-step process for setting up the new Covr Point. Simply follow the on-screen steps to complete the installation process. Repeat this process to add additional Covr Points. D-Link COVR-2202 User Manual 72 Section 4 - Adding Additional Extenders Connect to a Wireless Client WPS Button The easiest way to connect your wireless devices to your Covr Wi-Fi network is with WPS (Wi-Fi Protected Setup). Most wireless devices such as wireless adapters, media players, Blu-ray DVD players, wireless printers, and cameras will have a WPS button that you can press to connect to the Covr Point. Please refer to your user manual for the wireless device you want to connect to make sure you understand how to enable WPS. After consulting your device's manual, follow the steps below:

Step 1 - Press the WPS button on the nearest Covr Point for about 1 second. The COVR LED on the front will start to blink white. WPS Button Step 2 - Within 120 seconds, press the WPS button on your wireless device (or launch the software utility and start the WPS process). Step 3 - Allow up to 1 minute for your connection to be configured. Once the COVR LED stops blinking, you will be connected and your wireless connection will be encrypted with WPA2. D-Link COVR-2202 User Manual 73 Section 5- Connecting a Wireless Client Upgrading Firmware To ensure that you are always enjoying the latest features and improvements, it is recommended to always keep your device up-to-date with the latest firmware. You can upgrade your device's firmware using the web-based user interface, or on your mobile device using the D-Link Wi-Fi app. Using the Web User Interface To upgrade firmware using the web-based user interface, refer to Upgrade on page 68. Follow the instructions below to learn how to upgrade the firmware of your Covr device using the D-Link Wi-Fi app. Using the D-Link Wi-Fi App 1. When a new firmware is available, the device icon on the home page will show a red exclamation mark. Tap on the device icon to continue. D-Link COVR-2202 User Manual 74 Section 6 - Troubleshooting Using the D-Link Wi-Fi App (Continued) 2. A window will appear to confirm that a new firmware version is available. Tap Yes to continue. 3. In the Firmware Upgrade window, tap Upgrade Now to begin the upgrade process. Note: Do not power off or reboot the device while the upgrade is in progress, as this may result in the device not working properly. D-Link COVR-2202 User Manual 75 Section 6 - Troubleshooting Resetting Your Device If you cannot remember your password and cannot log in, or the device is not working properly, you can reset your device to factory default settings. Note that resetting to factory settings will undo all of your settings. To reset the device, press and hold down the Reset button on the bottom of the device using an unfolded paper clip until the COVR LED on the front panel turns solid red, then release. Once the device has been reset and the LED starts blinking orange, you can set up your device again using the D-Link Wi-Fi app or the web-based user interface. Refer to Hardware Setup on page 7 for more information. D-Link COVR-2202 User Manual 76 Reset Button Section 6 - Troubleshooting Wireless Basics D-Link wireless products are based on industry standards to provide easy-to-use and compatible high-speed wireless connectivity within your home, business, or public access wireless networks. Strictly adhering to the IEEE standard, the D-Link wireless family of products will allow you to securely access the data you want, when, and where you want it. You will be able to enjoy the freedom that wireless networking delivers. A wireless local area network (WLAN) is a cellular computer network that transmits and receives data with radio signals instead of wires. Wireless LANs are used increasingly in both home and office environments, and public areas such as airports, coffee shops and universities. Innovative ways to utilize WLAN technology are helping people work, and communicate more efficiently. Increased mobility and the absence of cabling and other fixed infrastructure have proven to be beneficial for many users. Wireless users can use the same applications they use on a wired network. Wireless adapter cards used on laptop and desktop systems support the same protocols as Ethernet adapter cards. Under many circumstances, it may be desirable for mobile network devices to link to a conventional Ethernet LAN in order to use servers, printers or an Internet connection supplied through the wired LAN. A wireless router is a device used to provide this link. D-Link COVR-2202 User Manual 77 Appendix A - Wireless Basics What is Wireless?

Wireless or Wi-Fi technology is another way of connecting your computer to the network without using wires. Wi-Fi uses radio frequency to connect wirelessly so you have the freedom to connect computers anywhere in your home or office network. Why D-Link Wireless?

D-Link is the worldwide leader and award winning designer, developer, and manufacturer of networking products. D-Link delivers the performance you need at a price you can afford. D-Link has all the products you need to build your network. How does wireless work?

Wireless works similarly to how cordless phones work, through radio signals that transmit data from one point A to point B. But wireless technology has restrictions as to how you can access the network. You must be within the wireless network range area to be able to connect your computer. There are two different types of wireless networks: Wireless Local Area Network (WLAN), and Wireless Personal Area Network (WPAN). Wireless Local Area Network (WLAN) In a wireless local area network, a device called an Access Point (AP) connects computers to the network. The access point has a small antenna attached to it, which allows it to transmit data back and forth over radio signals. With an indoor access point the signal can travel up to 300 feet. With an outdoor access point the signal can reach out up to 30 miles to serve places like manufacturing plants, industrial locations, university and high school campuses, airports, golf courses, and many other outdoor venues. D-Link COVR-2202 User Manual 78 Appendix A - Wireless Basics Wireless Personal Area Network (WPAN) Bluetooth is the industry standard wireless technology used for WPAN. Bluetooth devices in WPAN operate in a range up to 30 feet away. Compared to WLAN the speed and wireless operation range are both less than WLAN, but in return it doesnt use nearly as much power. This makes it ideal for personal devices, such as mobile phones, PDAs, headphones, laptops, speakers, and other devices that operate on batteries. Who uses wireless?

Wireless technology as become so popular in recent years that almost everyone is using it, whether its for home, office, business, D-Link has a wireless solution for it. Home uses/benefits Gives everyone at home broadband access Surf the web, check email, instant message, etc. Gets rid of the cables around the house Simple and easy to use Stay on top of everything at home as you would at office Remotely access your office network from home Share Internet connection and printer with multiple computers No need to dedicate office space Small office and home office uses/benefits D-Link COVR-2202 User Manual 79 Appendix A - Wireless Basics Where is wireless used?

Wireless technology is expanding everywhere, not just at home or office. People like the freedom of mobility and its becoming so popular that more and more public facilities now provide wireless access to attract people. The wireless connection in public places is usually called hotspots. Using a D-Link USB adapter with your laptop, you can access the hotspot to connect to the Internet from remote locations like:

airports, hotels, coffee shops, libraries, restaurants, and convention centers. Wireless network is easy to setup, but if youre installing it for the first time it could be quite a task not knowing where to start. Thats why weve put together a few setup steps and tips to help you through the process of setting up a wireless network. Tips Here are a few things to keep in mind, when you install a wireless network. Centralize your router or access point Make sure you place the router/access point in a centralized location within your network for the best performance. Try to place the router/access point as high as possible in the room, so the signal gets dispersed throughout your home. If you have a two-story home, you may need a repeater to boost the signal to extend the range. Eliminate Interference Place home appliances such as cordless telephones, microwaves, and televisions as far away as possible from the router/access point. This would significantly reduce any interference that the appliances might cause since they operate on same frequency. Security Dont let your next-door neighbors or intruders connect to your wireless network. Secure your wireless network by turning on the WPA or WEP security feature on the router. Refer to the product manual for detail information on how to set it up. D-Link COVR-2202 User Manual 80 Appendix A - Wireless Basics Technical Specifications COVR-2200 Technical Specifications General Device Interfaces (per unit) IEEE 802.11 ac/n/g/a wireless WAN 2 x Gigabit LAN ports LEDs Antenna Type Data Signal Rate Standards Functionality Security Advanced Features Physical Dimensions (L x W x H) Weight (per unit) Power Input COVR 6 x internal antennas 2.4 GHz 5 GHz Up to 300 Mbps1 Up to 866 Mbps1 IEEE 802.3i IEEE 802.3u IEEE 802.3ab Supports auto-negotiation Supports auto-MDI/MDIX 128-bit AES data encryption Covr Wi-Fi Auto-configuration Wireless roaming Wireless band steering Wireless Air Time Fairness (ATF) Web-based setup wizard 90 x 100 x 200 mm (3.54 x 3.94 x 7.87 in) TBD g (TBD lbs) 100 V to 240 V/AC, 50/60 Hz 5 GHz [backhaul]

Up to 866 Mbps1 Ethernet 10/100/1000 Mbps (auto-negotiation) IEEE 802.11ac Wave II IEEE 802.11n IEEE 802.11g IEEE 802.11a WPA/WPA2 wireless security Smart Backhaul Quality of Service (QoS) MU-MIMO (Wi-Fi) Wi-Fi Protected Setup (WPS) Power Consumption 20 W Temperature Humidity Operating: 0 to 40 C (32 to 104 F) Operating: 10% to 90% non-condensing Storage: -20 to 70 C (-4 to 158 F) Storage: 5% to 90% non-condensing D-Link COVR-2202 User Manual 81 Appendix B - Technical Specifications Certifications FCC IC CE RCM IDA CB LVD UL RoHS 1 Maximum wireless signal rate derived from the IEEE 802.11ac and 802.11n standards specifications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead, may lower actual data throughput rate. Environmental factors will adversely affect wireless signal range. D-Link COVR-2202 User Manual 82 Appendix B - Technical Specifications Federal Communication Commission Interference Statement Regulatory Information This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Operations in the 5.15-5.25GHz band are restricted to indoor usage only. This device meets all the other requirements specified in Part 15E, Section 15.407 of the FCC Rules. IMPORTANT NOTICE:

FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 35cm between the radiator & your body. Note The country code selection is for non-USA models only and is not available to all USA models. Per FCC regulations, all WiFi product marketed in the USA must be fixed to USA operational channels only. D-Link COVR-2202 User Manual 83 Appendix C - Safety Statements Innovation, Science and Economic Development Canada (ISED) Statement:

This device complies with ISED licence-exempt RSS standard(s). Operation is subject to the following two conditions:

(1) this device may not cause interference, and

(2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'ISED applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes :

(1) l'appareil ne doit pas produire de brouillage, et

(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. Caution :

(i) the device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems;

(ii) the maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 5470-5725 MHz shall be such that the equipment still complies with the e.i.r.p. limit;

(iii) the maximum antenna gain permitted for devices in the band 5725-5850 MHz shall be such that the equipment still complies with the e.i.r.p. limits specified for point-to-point and non-point-to-point operation as appropriate; and

(iv) the worst-case tilt angle(s) necessary to remain compliant with the e.i.r.p. elevation mask requirement set forth in Section 6.2.2(3) shall be clearly indicated.

(v) Users should also be advised that high-power radars are allocated as primary users (i.e. priority users) of the bands 5250-5350 MHz and 5650-

5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices. D-Link COVR-2202 User Manual 84 Appendix C - Safety Statements Avertissement:

Le guide dutilisation des dispositifs pour rseaux locaux doit inclure des instructions prcises sur les restrictions susmentionnes, notamment :

(i) les dispositifs fonctionnant dans la bande 5150-5250 MHz sont rservs uniquement pour une utilisation lintrieur afin de rduire les risques de brouillage prjudiciable aux systmes de satellites mobiles utilisant les mmes canaux;

(ii) le gain maximal d'antenne permis pour les dispositifs utilisant les bandes de 5250 5 350 MHz et de 5470 5725 MHz doit tre conforme la limite de la p.i.r.e;

(iii) le gain maximal d'antenne permis (pour les dispositifs utilisant la bande de 5 725 5 850 MHz) doit tre conforme la limite de la p.i.r.e. spcifie pour l'exploitation point point et lexploitation non point point, selon le cas;

(iv) les pires angles dinclinaison ncessaires pour rester conforme lexigence de la p.i.r.e. applicable au masque dlvation, et nonce la section 6.2.2 3), doivent tre clairement indiqus.

(v) De plus, les utilisateurs devraient aussi tre aviss que les utilisateurs de radars de haute puissance sont dsigns utilisateurs principaux

(c.--d., quils ont la priorit) pour les bandes 5250-5350 MHz et 5650-5850 MHz et que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL. Radiation Exposure Statement This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 40 cm between the radiator and your body. Dclaration d'exposition aux radiations Cet quipement est conforme aux limites d'exposition aux rayonnements ISED tablies pour un environnement non contrl. Cet quipement doit tre install et utilis avec un minimum de 40 cm de distance entre la source de rayonnement et votre corps. D-Link COVR-2202 User Manual 85 Appendix C - Safety Statements

1. MPE1mW/cm2 40 cm D-Link COVR-2202 User Manual 86 Appendix C - Safety Statements Frequency Band(s) Frequenzband Frquence bande(s) Bandas de Frecuencia Frequenza/e Frequentie(s) 5.15 5.25 GHz 5.25 5.35 GHz 5.47 5.725 GHz 2.4 2.4835 GHz 5 G 2.4 G Max. Output Power (EIRP) Max. Output Power Consommation dnergie max. Potencia mxima de Salida Potenza max. Output Max. Output Power 200 mW 200 mW 1 W 100 mW D-Link COVR-2202 User Manual 87 Appendix C - Safety Statements esky [Czech]

Dansk [Danish]

Deutsch [German]

Eesti [Estonian]

English Espaol [Spanish]

[Greek]

Franais [French]

Italiano [Italian]

European Community Declaration of Conformity:

Tmto D-Link Corporation prohlauje, e tento produkt, jeho psluenstv a software jsou v souladu se smrnic 2014/53/EU. Cel text ES prohlen o shod vydanho EU a o firmwaru produktu lze sthnout na strnkch k produktu www.dlink.com. D-Link Corporation erklrer herved, at dette produkt, tilbehr og software er i overensstemmelse med direktiv 2014/53/EU. Den fulde tekst i EU-overensstemmelseserklringen og produktfirmware kan wnloades fra produktsiden hos www.dlink.com. Hiermit erklrt die D-Link Corporation, dass dieses Produkt, das Zubehr und die Software der Richtlinie 2014/53/

EU entsprechen. Der vollstndige Text der Konformittserklrung der Europischen Gemeinschaft sowie die Firmware zum Produkt stehen Ihnen zum Herunterladen von der Produktseite im Internet auf www.dlink.com zur Verfgung. Kesolevaga kinnitab D-Link Corporation, et see toode, tarvikud ja tarkvara on koosklas direktiiviga 2014/53/EL. Euroopa Liidu vastavusdeklaratsiooni tistekst ja toote psivara on allalaadimiseks saadaval tootelehel www.dlink. com. Hereby, D-Link Corporation, declares that this product, accessories, and software are in compliance with directive 2014/53/EU. The full text of the EU Declaration of Conformity and product firmware are available for download from the product page at www.dlink.com Por la presente, D-Link Corporation declara que este producto, accesorios y software cumplen con las directivas 2014/53/UE. El texto completo de la declaracin de conformidad de la UE y el firmware del producto estn disponibles y se pueden descargar desde la pgina del producto en www.dlink.com.

, D-Link Corporation , 2014/53/. www.dlink. com. Par les prsentes, D-Link Corporation dclare que ce produit, ces accessoires et ce logiciel sont conformes aux directives 2014/53/UE.Le texte complet de la dclaration de conformit de l'UE et le icroprogramme du produit sont disponibles au tlchargement sur la page des produits www.dlink.com. Con la presente, D-Link Corporation dichiara che questo prodotto, i relativi accessori e il software sono conformi alla direttiva 2014/53/UE. Il testo completo della dichiarazione di conformit UE e il firmware del prodotto sono disponibili per il download dalla pagina del prodotto su www.dlink.com. D-Link COVR-2202 User Manual 88 Appendix C - Safety Statements Latviski [Latvian]

Lietuvi [Lithuanian]

Nederlands [Dutch]

Malti [Maltese]

Magyar [Hungarian]

Polski [Polish]

Portugus [Portuguese]

Slovensko[Slovenian]

Slovensky [Slovak]

Suomi [Finnish]

Svenska[Swedish]

Ar o uzmums D-Link Corporation apliecina, ka is produkts, piederumi un programmatra atbilst direktvai 2014/53/ES. ES atbilstbas deklarcijas pilno tekstu un produkta apartprogrammatru var lejupieldt attiecg produkta lap vietn www.dlink.com. iuo dokumentu D-Link Corporation pareikia, kad is gaminys, priedai ir programin ranga atitinka direktyv 2014/53/ES. Vis ES atitikties deklaracijos tekst ir gaminio programin aparatin rang galima atsisisti i gaminio puslapio adresu www.dlink.com. Hierbij verklaart D-Link Corporation dat dit product, accessoires en software voldoen aan de richtlijnen 2014/53/

EU. De volledige tekst van de EU conformiteitsverklaring en productfirmware is beschikbaar voor download van de productpagina op www.dlink.com. Bil-preenti, D-Link Corporation tiddikjara li dan il-prodott, l-aessorji, u s-software huma konformi mad-Direttiva 2014/53/UE. Tista tniel it-test si tad-dikjarazzjoni ta konformit tal-UE u l-firmware tal-prodott mill-pana tal-

prodott fuq www.dlink.com. Ezennel a D-Link Corporation kijelenti, hogy a jelen termk, annak tartozkai s szoftvere megfelelnek a 2014/53/

EU sz. rendeletek rendelkezseinek. Az EU Megfelelsgi nyilatkozat teljes szvege s a termk firmware a termk oldalrl tlthet le a www.dlink.com cmen. D-Link Corporation niniejszym owiadcza, e ten produkt, akcesoria oraz oprogramowanie s zgodne z dyrektywami 2014/53/EU. Peen tekst deklaracji zgodnoci UE oraz oprogramowanie sprztowe do produktu mona pobra na stronie produktu w witrynie www.dlink.com. Desta forma, a D-Link Corporation declara que este produto, os acessrios e o software esto em conformidade com a diretiva 2014/53/UE. O texto completo da declarao de conformidade da UE e do firmware Podjetje D-Link Corporation s tem izjavlja, da so ta izdelek, dodatna oprema in programnska oprema skladni z direktivami 2014/53/EU. Celotno besedilo izjave o skladnosti EU in vdelana programska oprema sta na voljo za prenos na strani izdelka na www.dlink.com. Spolonos D-Link tmto vyhlasuje, e tento produkt, prsluenstvo a softvr s v slade so smernicou 214/53/

E. pln znenie vyhlsenia E o zhode a firmvri produktu s k dispozcii na prevzatie zo strnky produktu www. dlink.com. D-Link Corporation tten vakuuttaa, ett tm tuote, lisvarusteet ja ohjelmisto ovat direktiivin 2014/53/EU vaatimusten mukaisia. Tydellinen EU-vaatimustenmukaisuusvakuutus samoin kuin tuotteen laiteohjelmisto ovat ladattavissa osoitteesta www.dlink.com. D-Link Corporation frskrar hrmed att denna produkt, tillbehr och programvara verensstmmer med direktiv 2014/53/EU. Hela texten med EU-frskran om verensstmmelse och produkt-firmware kan hmtas frn produktsidan p www.dlink.com. D-Link COVR-2202 User Manual 89 Appendix C - Safety Statements slenska [Icelandic]

Norsk [Norwegian]

Hr me lsir D-Link Corporation v yfir a essi vara, fylgihlutir og hugbnaur eru samrmi vi tilskipun 2014/53/EB. Skja m ESB-samrmisyfirlsinguna heild sinni og fastbna vrunnar af vefsu vrunnar www. dlink.com. Herved erklrer D-Link Corporation at dette produktet, tilbehret og programvaren er i samsvar med direktivet 2014/53/EU. Den fullstendige teksten i EU-erklring om samsvar og produktets fastvare er tilgjengelig for nedlasting fra produktsiden p www.dlink.com. Warning Statement:

The power outlet should be near the device and easily accessible. D-Link COVR-2202 User Manual 90 Appendix C - Safety Statements NOTICE OF WIRELESS RADIO LAN USAgE IN ThE EUROPEAN COMMUNITy (FOR WIRELESS PRODUCT ONLy):

This device is restricted to indoor use when operated in the European Community using channels in the 5.15-5.35 GHz band to reduce the potential for interference. This device is a 2.4 GHz wideband transmission system (transceiver), intended for use in all EU member states and EFTA countries. This equipment may be operated in AL, AD, BE, BG, DK, DE, FI, FR, GR, GW, IS, IT, HR, LI, LU, MT, MK, MD, MC, NL, NO, AT, PL, PT, RO, SM, SE, RS, SK, ES, CI, HU, and CY. Usage Notes:

To remain in conformance with European National spectrum usage regulations, frequency and channel limitations will be applied on the products according to the country where the equipment will be deployed. This device is restricted from functioning in Ad-hoc mode while operating in 5 GHz. Ad-hoc mode is direct peer-to-peer communication between two client devices without an Access Point. Access points will support DFS (Dynamic Frequency Selection) and TPC (Transmit Power Control) functionality as required when operating in 5 GHz band within the EU. Please refer to the product manual or datasheet to check whether your product uses 2.4 GHz and/or 5 GHz wireless. hINWEIS ZUR VERWENDUNg VON DRAhTLOS-NETZWERK (WLAN) IN DER EUROPISChEN gEMEINSChAFT ( NUR FR EIN DRAHTLOSES PRODUKT ) Der Betrieb dieses Gerts in der Europischen Gemeinschaft bei Nutzung von Kanlen im 5,15-5,35 GHz Frequenzband ist ausschlielich auf Innenrume beschrnkt, um das Interferenzpotential zu reduzieren. Bei diesem Gert handelt es sich um ein zum Einsatz in allen EU-Mitgliedsstaaten und in EFTA-Lndern - ausgenommen Frankreich. Der Betrieb dieses Gerts ist in den folgenden Lndern erlaubt: AL, AD, BE, BG, DK, DE, FI, FR, GR, GW, IS, IT, HR, LI, LU, MT, MK, MD, MC, NL, NO, AT, PL, PT, RO, SM, SE, RS, SK, ES, CI, HU, CY Gebrauchshinweise:

Um den in Europa geltenden nationalen Vorschriften zum Nutzen des Funkspektrums weiterhin zu entsprechen, werden Frequenz und Kanalbeschrnkungen, dem jeweiligen Land, in dem das Gert zum Einsatz kommt, entsprechend, auf die Produkte angewandt. Die Funktionalitt im Ad-hoc-Modus bei Betrieb auf 5 GHz ist fr dieses Gert eingeschrnkt. Bei dem Ad-hoc-Modus handelt es sich um eine Peer-to-Peer-Kommunikation zwischen zwei Client-Gerten ohneeinen Access Point. Access Points untersttzen die Funktionen DFS (Dynamic Frequency Selection) und TPC (Transmit Power Control) wie erforderlich bei Betrieb auf 5 GHz innerhalb der EU. Bitte schlagen Sie im Handbuch oder Datenblatt nach nach, ob Ihr Gert eine 2,4 GHz und / oder 5 GHz Verbindung nutzt. D-Link COVR-2202 User Manual 91 Appendix C - Safety Statements AVIS CONCERNANT L'UTILISATION DE LA RADIO SANS FIL LAN DANS LA COMMUNAUT EUROPENNE (UNIQUEMENT POUR LES PRODUITS SANS FIL) Cet appareil est limit un usage intrieur lorsqu'il est utilis dans la Communaut europenne sur les canaux de la bande de 5,15 5,35 GHz afin de rduire les risques d'interfrences. Cet appareil est un systme de transmission large bande (metteur-rcepteur) de 2,4 GHz, destin tre utilis dans tous les tats-

membres de l'UE et les pays de l'AELE. Cet quipement peut tre utilis dans les pays suivants : AL, AD, BE , BG, DK, DE, FI, FR, GR, GW, IS, IT, HR, LI, LU, MT , MK, MD, MC, NL, NO, AT, PL, PT, RO, SM, SE, RS, SK, ES, CI, HU, CY Notes d'utilisation:

Pour rester en conformit avec la rglementation nationale europenne en matire d'utilisation du spectre, des limites de frquence et de canal seront appliques aux produits selon le pays o l'quipement sera dploy. Cet appareil ne peut pas utiliser le mode Ad-hoc lorsqu'il fonctionne dans la bande de 5 GHz. Le mode Adhoc fournit une communication directe pair pair entre deux priphriques clients sans point d'accs. Les points d'accs prendront en charge les fonctionnalits DFS (Dynamic Frequency Selection) et TPC (Transmit Power Control) au besoin lors du fonctionnement dans la bande de 5 GHz au sein de l'UE. Merci de vous rfrer au guide d'utilisation ou de la fiche technique afin de vrifier si votre produit utilise 2.4 GHz et/ou 5 GHz sans fil. AVISO DE USO DE LA LAN DE RADIO INALMBRICA EN LA COMUNIDAD EUROPEA (SOLO PARA EL PRODUCTO INALMBRICO) El uso de este dispositivo est restringido a interiores cuando funciona en la Comunidad Europea utilizando canales en la banda de 5,15-5,35 GHz, para reducir la posibilidad de interferencias. Este dispositivo es un sistema de transmisin (transceptor) de banda ancha de 2,4 GHz, pensado para su uso en todos los estados miembros de la UE y en los pases de la AELC. Este equipo se puede utilizar en AL, AD, BE, BG, DK, DE, FI, FR, GR, GW, IS, IT, HR, LI, LU, MT, MK, MD, MC, NL, NO, AT, PL, PT, RO, SM, SE, RS, SK, ES, CI, HU, CY Notas de uso:

Para seguir cumpliendo las normas europeas de uso del espectro nacional, se aplicarn limitaciones de frecuencia y canal en los productos en funcin del pas en el que se pondr en funcionamiento el equipo. Este dispositivo tiene restringido el funcionamiento en modo Ad-hoc mientras funcione a 5 Ghz. El modo Ad-hoc es la comunicacin directa de igual a igual entre dos dispositivos cliente sin un punto de acceso. Los puntos de acceso admitirn la funcionalidad DFS (Seleccin de frecuencia dinmica) y TPC (Control de la potencia de transmisin) si es necesario cuando funcionan a 5 Ghz dentro de la UE. Por favor compruebe el manual o la ficha de producto para comprobar si el producto utiliza las bandas inalmbricas de 2.4 GHz y/o la de 5 GHz. D-Link COVR-2202 User Manual 92 Appendix C - Safety Statements AVVISO PER LUSO DI LAN RADIO WIRELESS NELLA COMUNIT EUROPEA (SOLO PER PRODOTTI WIRELESS) Nella Comunit europea, luso di questo dispositivo limitato esclusivamente agli ambienti interni sui canali compresi nella banda da 5,15 a 5,35 GHz al fine di ridurre potenziali interferenze. Questo dispositivo un sistema di trasmissione a banda larga a 2,4 GHz (ricetrasmittente), destinato alluso in tutti gli stati membri dellUnione europea e nei paesi EFTA. Questo dispositivo pu essere utilizzato in AL, AD, BE, BG, DK, DE, FI, FR, GR, GW, IS, IT, HR, LI, LU, MT, MK, MD, MC, NL, NO, AT, PL, PT, RO, SM, SE, RS, SK, ES, CI, HU, CY Note per luso Al fine di mantenere la conformit alle normative nazionali europee per luso dello spettro di frequenze, saranno applicate limitazioni sulle frequenze e sui canali per il prodotto in conformit alle normative del paese in cui il dispositivo viene utilizzato. Questo dispositivo non pu essere attivato in modalit Ad-hoc durante il funzionamento a 5 Ghz. La modalit Ad-hoc una comunicazione diretta peer-to-peer fra due dispositivi client senza un punto di accesso. I punti di accesso supportano le funzionalit DFS (Dynamic Frequency Selection) e TPC (Transmit Power Control) richieste per operare a 5 Ghz nellUnione europea. Ti invitiamo a fare riferimento al manuale del prodotto o alla scheda tecnica per verificare se il tuo prodotto utilizza le frequenze 2,4 GHz e/o 5 GHz. KENNISgEVINg VAN DRAADLOOS RADIO LAN-gEBRUIK IN DE EUROPESE gEMEENSChAP (ALLEEN VOOR DRAADLOOS PRODUCT) Dit toestel is beperkt tot gebruik binnenshuis wanneer het wordt gebruikt in de Europese Gemeenschap gebruik makend van kanalen in de 5.15-5.35 GHz band om de kans op interferentie te beperken. Dit toestel is een 2.4 GHz breedband transmissiesysteem (transceiver) dat bedoeld is voor gebruik in alle EU lidstaten en EFTA landen. Deze uitrusting mag gebruikt worden in AL, AD, BE, BG, DK, DE, FI, FR, GR, GW, IS, IT, HR, LI, LU, MT, MK, MD, MC, NL, NO, AT, PL, PT, RO, SM, SE, RS, SK, ES, CI, HU, CY Gebruiksaanwijzingen:

Om de gebruiksvoorschriften van het Europese Nationale spectrum na te leven, zullen frequentie- en kanaalbeperkingen worden toegepast op de producten volgens het land waar de uitrusting gebruikt zal worden. Dit toestel kan niet functioneren in Ad-hoc mode wanneer het gebruikt wordt in 5 GHz. Ad-hoc mode is directe peer-to-peer communicatie tussen twee klantenapparaten zonder een toegangspunt. Toegangspunten ondersteunen DFS (Dynamic Frequency Selection) en TPC (Transmit Power Control) functionaliteit zoals vereist bij gebruik in 5 GHz binnen de EU. Raadpleeg de handleiding of de datasheet om te controleren of uw product gebruik maakt van 2.4 GHz en/of 5 GHz. D-Link COVR-2202 User Manual 93 Appendix C - Safety Statements SAFETY INSTRUCTIONS The following general safety guidelines are provided to help ensure your own personal safety and protect your product from potential damage. Remember to consult the product user instructions for more details. Static electricity can be harmful to electronic components. Discharge static electricity from your body (i.e. touching grounded bare metal) before touching the product. Do not attempt to service the product and never disassemble the product. For some products with a user replaceable battery, please read and follow the instructions in the user manual. Do not spill food or liquid on your product and never push any objects into the openings of your product. Do not use this product near water, areas with high humidity, or condensation unless the product is specifically rated for outdoor application. Keep the product away from radiators and other heat sources. Always unplug the product from mains power before cleaning and use a dry lint free cloth only. SICHERHEITSVORSCHRIFTEN Die folgenden allgemeinen Sicherheitsvorschriften dienen als Hilfe zur Gewhrleistung Ihrer eigenen Sicherheit und zum Schutz Ihres Produkts. Weitere Details finden Sie in den Benutzeranleitungen zum Produkt. Statische Elektrizitt kann elektronischen Komponenten schaden. Um Schden durch statische Aufladung zu vermeiden, leiten Sie elektrostatische Ladungen von Ihrem Krper ab,

(z. B. durch Berhren eines geerdeten blanken Metallteils), bevor Sie das Produkt berhren. Unterlassen Sie jeden Versuch, das Produkt zu warten, und versuchen Sie nicht, es in seine Bestandteile zu zerlegen. Fr einige Produkte mit austauschbaren Akkus lesen Sie bitte das Benutzerhandbuch und befolgen Sie die dort beschriebenen Anleitungen. Vermeiden Sie, dass Speisen oder Flssigkeiten auf Ihr Produkt gelangen, und stecken Sie keine Gegenstnde in die Gehuseschlitze oder

-ffnungen Ihres Produkts. Verwenden Sie dieses Produkt nicht in unmittelbarer Nhe von Wasser und nicht in Bereichen mit hoher Luftfeuchtigkeit oder Kondensation, es sei denn, es ist speziell zur Nutzung in Auenbereichen vorgesehen und eingestuft. Halten Sie das Produkt von Heizkrpern und anderen Quellen fern, die Wrme erzeugen. Trennen Sie das Produkt immer von der Stromzufuhr, bevor Sie es reinigen und verwenden Sie dazu ausschlielich ein trockenes fusselfreies Tuch. D-Link COVR-2202 User Manual 94 Appendix C - Safety Statements CONSIgNES DE SCURIT Les consignes gnrales de scurit ci-aprs sont fournies afin dassurer votre scurit personnelle et de protger le produit dventuels dommages. Veuillez consulter les consignes dutilisation du produit pour plus de dtails. Llectricit statique peut endommager les composants lectroniques. Dchargez llectricit statique de votre corps (en touchant un objet en mtal reli la terre par exemple) avant de toucher le produit. Nessayez pas dintervenir sur le produit et ne le dmontez jamais. Pour certains produits contenant une batterie remplaable par lutilisateur, veuillez lire et suivre les consignes contenues dans le manuel dutilisation. Ne renversez pas daliments ou de liquide sur le produit et ninsrez jamais dobjets dans les orifices. Nutilisez pas ce produit proximit dun point deau, de zones trs humides ou de condensation sauf si le produit a t spcifiquement conu pour une application extrieure. loignez le produit des radiateurs et autres sources de chaleur. Dbranchez toujours le produit de lalimentation avant de le nettoyer et utilisez uniquement un chiffon sec non pelucheux. INSTRUCCIONES DE SEGURIDAD Las siguientes directrices de seguridad general se facilitan para ayudarle a garantizar su propia seguridad personal y para proteger el producto frente a posibles daos. No olvide consultar las instrucciones del usuario del producto para obtener ms informacin. La electricidad esttica puede resultar nociva para los componentes electrnicos. Descargue la electricidad esttica de su cuerpo (p. ej., tocando algn metal sin revestimiento conectado a tierra) antes de tocar el producto. No intente realizar el mantenimiento del producto ni lo desmonte nunca. Para algunos productos con batera reemplazable por el usuario, lea y siga las instrucciones del manual de usuario. No derrame comida o lquidos sobre el producto y nunca deje que caigan objetos en las aberturas del mismo. No utilice este producto cerca del agua, en zonas con humedad o condensacin elevadas a menos que el producto est clasificado especficamente para aplicacin en exteriores. Mantenga el producto alejado de los radiadores y de otras fuentes de calor. Desenchufe siempre el producto de la alimentacin de red antes de limpiarlo y utilice solo un pao seco sin pelusa. D-Link COVR-2202 User Manual 95 Appendix C - Safety Statements ISTRUZIONI PER LA SICUREZZA Le seguenti linee guida sulla sicurezza sono fornite per contribuire a garantire la sicurezza personale degli utenti e a proteggere il prodotto da potenziali danni. Per maggiori dettagli, consultare le istruzioni per lutente del prodotto. Lelettricit statica pu essere pericolosa per i componenti elettronici. Scaricare lelettricit statica dal corpo (ad esempio toccando una parte metallica collegata a terra) prima di toccare il prodotto. Non cercare di riparare il prodotto e non smontarlo mai. Per alcuni prodotti dotati di batteria sostituibile dallutente, leggere e seguire le istruzioni riportate nel manuale dellutente. Non versare cibi o liquidi sul prodotto e non spingere mai alcun oggetto nelle aperture del prodotto. Non usare questo prodotto vicino allacqua, in aree con elevato grado di umidit o soggette a condensa a meno che il prodotto non sia specificatamente approvato per uso in ambienti esterni. Tenere il prodotto lontano da caloriferi e altre fonti di calore. Scollegare sempre il prodotto dalla presa elettrica prima di pulirlo e usare solo un panno asciutto che non lasci filacce. VEILIghEIDSINFORMATIE De volgende algemene veiligheidsinformatie werd verstrekt om uw eigen persoonlijke veiligheid te waarborgen en uw product te beschermen tegen mogelijke schade. Denk eraan om de gebruikersinstructies van het product te raadplegen voor meer informatie. Statische elektriciteit kan schadelijk zijn voor elektronische componenten. Ontlaad de statische elektriciteit van uw lichaam (d.w.z. het aanraken van geaard bloot metaal) voordat uhet product aanraakt. U mag nooit proberen het product te onderhouden en u mag het product nooit demonteren. Voor sommige producten met door de gebruiker te vervangen batterij, dient u de instructies in de gebruikershandleiding te lezen en te volgen. Mors geen voedsel of vloeistof op uw product en u mag nooit voorwerpen in de openingen van uw product duwen. Gebruik dit product niet in de buurt van water, gebieden met hoge vochtigheid of condensatie, tenzij het product specifiek geclassificeerd is voor gebruik buitenshuis. Houd het product uit de buurt van radiators en andere warmtebronnen. U dient het product steeds los te koppelen van de stroom voordat u het reinigt en gebruik uitsluitend een droge pluisvrije doek. D-Link COVR-2202 User Manual 96 Appendix C - Safety Statements Disposing and Recycling Your Product ENGLISH EN This symbol on the product or packaging means that according to local laws and regulations this product should be not be disposed of in household waste but sent for recycling. Please take it to a collection point designated by your local authorities once it has reached the end of its life, some will accept products for free. By recycling the product and its packaging in this manner you help to conserve the environment and protect human health. D-Link and the Environment At D-Link, we understand and are committed to reducing any impact our operations and products may have on the environment. To minimise this impact D-Link designs and builds its products to be as environmentally friendly as possible, by using recyclable, low toxic materials in both products and packaging. D-Link recommends that you always switch off or unplug your D-Link products when they are not in use. By doing so you will help to save energy and reduce CO2 emissions. To learn more about our environmentally responsible products and packaging please visit www.dlinkgreen.com. DEUTSCH DE Dieses Symbol auf dem Produkt oder der Verpackung weist darauf hin, dass dieses Produkt gem bestehender rtlicher Gesetze und Vorschriften nicht ber den normalen Hausmll entsorgt werden sollte, sondern einer Wiederverwertung zuzufhren ist. Bringen Sie es bitte zu einer von Ihrer Kommunalbehrde entsprechend amtlich ausgewiesenen Sammelstelle, sobald das Produkt das Ende seiner Nutzungsdauer erreicht hat. Fr die Annahme solcher Produkte erheben einige dieser Stellen keine Gebhren. Durch ein auf diese Weise durchgefhrtes Recycling des Produkts und seiner Verpackung helfen Sie, die Umwelt zu schonen und die menschliche Gesundheit zu schtzen. D-Link und die Umwelt D-Link ist sich den mglichen Auswirkungen seiner Geschftsttigkeiten und seiner Produkte auf die Umwelt bewusst und fhlt sich verpflichtet, diese entsprechend zu mindern. Zu diesem Zweck entwickelt und stellt D-Link seine Produkte mit dem Ziel grtmglicher Umweltfreundlichkeit her und verwendet wiederverwertbare, schadstoffarme Materialien bei Produktherstellung und Verpackung. D-Link empfiehlt, Ihre Produkte von D-Link, wenn nicht in Gebrauch, immer auszuschalten oder vom Netz zu nehmen. Auf diese Weise helfen Sie, Energie zu sparen und CO2-Emissionen zu reduzieren. Wenn Sie mehr ber unsere umweltgerechten Produkte und Verpackungen wissen mchten, finden Sie entsprechende Informationen im Internet unter www.dlinkgreen.com. D-Link COVR-2202 User Manual 97 Appendix C - Safety Statements FRANAIS FR Ce symbole appos sur le produit ou son emballage signifie que, conformment aux lois et rglementations locales, ce produit ne doit pas tre limin avec les dchets domestiques mais recycl. Veuillez le rapporter un point de collecte prvu cet effet par les autorits locales; certains accepteront vos produits gratuitement. En recyclant le produit et son emballage de cette manire, vous aidez prserver lenvironnement et protger la sant de lhomme. D-Link et lenvironnement Chez D-Link, nous sommes conscients de l'impact de nos oprations et produits sur l'environnement et nous engageons le rduire. Pour limiter cet impact, D-Link conoit et fabrique ses produits de manire aussi cologique que possible, en utilisant des matriaux recyclables et faiblement toxiques, tant dans ses produits que ses emballages. D-Link recommande de toujours teindre ou dbrancher vos produits D-Link lorsque vous ne les utilisez pas. Vous raliserez ainsi des conomies dnergie et rduirez vos missions de CO2. Pour en savoir plus sur les produits et emballages respectueux de lenvironnement, veuillez consulter le www.dlinkgreen.com. ESPAOL ES Este smbolo en el producto o el embalaje significa que, de acuerdo con la legislacin y la normativa local, este producto no se debe desechar en la basura domstica sino que se debe reciclar. Llvelo a un punto de recogida designado por las autoridades locales una vez que ha llegado al fin de su vida til; algunos de ellos aceptan recogerlos de forma gratuita. Al reciclar el producto y su embalaje de esta forma, contribuye a preservar el medio ambiente y a proteger la salud de los seres humanos. D-Link y el medio ambiente En D-Link, comprendemos y estamos comprometidos con la reduccin del impacto que puedan tener nuestras actividades y nuestros productos en el medio ambiente. Para reducir este impacto, D-Link disea y fabrica sus productos para que sean lo ms ecolgicos posible, utilizando materiales reciclables y de baja toxicidad tanto en los productos como en el embalaje. D-Link recomienda apagar o desenchufar los productos D-Link cuando no se estn utilizando. Al hacerlo, contribuir a ahorrar energa y a reducir las emisiones de CO2. Para obtener ms informacin acerca de nuestros productos y embalajes ecolgicos, visite el sitio www.dlinkgreen.com. D-Link COVR-2202 User Manual 98 Appendix C - Safety Statements ITALIANO IT La presenza di questo simbolo sul prodotto o sulla confezione del prodotto indica che, in conformit alle leggi e alle normative locali, questo prodotto non deve essere smaltito nei rifiuti domestici, ma avviato al riciclo. Una volta terminato il ciclo di vita utile, portare il prodotto presso un punto di raccolta indicato dalle autorit locali. Alcuni questi punti di raccolta accettano gratuitamente i prodotti da riciclare. Scegliendo di riciclare il prodotto e il relativo imballaggio, si contribuir a preservare l'ambiente e a salvaguardare la salute umana. D-Link e l'ambiente D-Link cerca da sempre di ridurre l'impatto ambientale dei propri stabilimenti e dei propri prodotti. Allo scopo di ridurre al minimo tale impatto, D-Link progetta e realizza i propri prodotti in modo che rispettino il pi possibile l'ambiente, utilizzando materiali riciclabili a basso tasso di tossicit sia per i prodotti che per gli imballaggi. D-Link raccomanda di spegnere sempre i prodotti D-Link o di scollegarne la spina quando non vengono utilizzati. In questo modo si contribuir a risparmiare energia e a ridurre le emissioni di anidride carbonica. Per ulteriori informazioni sui prodotti e sugli imballaggi D-Link a ridotto impatto ambientale, visitate il sito all'indirizzo www.dlinkgreen.com. NEDERLANDS NL Dit symbool op het product of de verpakking betekent dat dit product volgens de plaatselijke wetgeving niet mag worden weggegooid met het huishoudelijk afval, maar voor recyclage moeten worden ingeleverd. Zodra het product het einde van de levensduur heeft bereikt, dient u het naar een inzamelpunt te brengen dat hiertoe werd aangeduid door uw plaatselijke autoriteiten, sommige autoriteiten accepteren producten zonder dat u hiervoor dient te betalen. Door het product en de verpakking op deze manier te recyclen helpt u het milieu en de gezondheid van de mens te beschermen. D-Link en het milieu Bij D-Link spannen we ons in om de impact van onze handelingen en producten op het milieu te beperken. Om deze impact te beperken, ontwerpt en bouwt D-Link zijn producten zo milieuvriendelijk mogelijk, door het gebruik van recycleerbare producten met lage toxiciteit in product en verpakking. D-Link raadt aan om steeds uw D-Link producten uit te schakelen of uit de stekker te halen wanneer u ze niet gebruikt. Door dit te doen bespaart u energie en beperkt u de CO2-emissies. Breng een bezoek aan www.dlinkgreen.com voor meer informatie over onze milieuverantwoorde producten en verpakkingen. D-Link COVR-2202 User Manual 99 Appendix C - Safety Statements POLSKI PL Ten symbol umieszczony na produkcie lub opakowaniu oznacza, e zgodnie z miejscowym prawem i lokalnymi przepisami niniejszego produktu nie wolno wyrzuca jak odpady czy mieci z gospodarstwa domowego, lecz naley go podda procesowi recyklingu. Po zakoczeniu uytkowania produktu, niektre odpowiednie do tego celu podmioty przyjm takie produkty nieodpatnie, dlatego prosimy dostarczy go do punktu zbirki wskazanego przez lokalne wadze. Poprzez proces recyklingu i dziki takiemu postpowaniu z produktem oraz jego opakowaniem, pomog Pastwo chroni rodowisko naturalne i dba o ludzkie zdrowie. D-Link i rodowisko D-Link podchodzimy w sposb wiadomy do ochrony otoczenia oraz jestemy zaangaowani w zmniejszanie wpywu naszych dziaa i produktw na rodowisko naturalne. W celu zminimalizowania takiego wpywu firma D-Link konstruuje i wytwarza swoje produkty w taki sposb, aby byy one jak najbardziej przyjazne rodowisku, stosujc do tych celw materiay nadajce si do powtrnego wykorzystania, charakteryzujce si ma toksycznoci zarwno w przypadku samych produktw jak i opakowa. Firma D-Link zaleca, aby Pastwo zawsze prawidowo wyczali z uytku swoje produkty D-Link, gdy nie s one wykorzystywane. Postpujc w ten sposb pozwalaj Pastwo oszczdza energi i zmniejsza emisje CO2. Aby dowiedzie si wicej na temat produktw i opakowa majcych wpyw na rodowisko prosimy zapozna si ze stron Internetow www. dlinkgreen.com. ESKY CZ Tento symbol na vrobku nebo jeho obalu znamen, e podle mstn platnch pedpis se vrobek nesm vyhazovat do komunlnho odpadu, ale odeslat k recyklaci. A vrobek doslou, odneste jej prosm na sbrn msto uren mstnmi ady k tomuto elu. Nkter sbrn msta pijmaj vrobky zdarma. Recyklac vrobku i obalu pomhte chrnit ivotn prosted i lidsk zdrav. D-Link a ivotn prosted Ve spolenosti D-Link jsme si vdomi vlivu naich provoz a vrobk na ivotn prosted a sname se o minimalizaci tchto vliv. Proto sv vrobky navrhujeme a vyrbme tak, aby byly co nejekologitj, a ve vrobcch i obalech pouvme recyklovateln a nzkotoxick materily. Spolenost D-Link doporuuje, abyste sv vrobky znaky D-Link vypnuli nebo vythli ze zsuvky vdy, kdy je nepouvte. Pomete tak etit energii a snit emise CO2. Vce informac o naich ekologickch vrobcch a obalech najdete na adrese www.dlinkgreen.com. D-Link COVR-2202 User Manual 100 Appendix C - Safety Statements MAgyAR hU Ez a szimblum a termken vagy a csomagolson azt jelenti, hogy a helyi trvnyeknek s szablyoknak megfelelen ez a termk nem semmisthet meg a hztartsi hulladkkal egytt, hanem jrahasznostsra kell kldeni. Krjk, hogy a termk lettartamnak elteltt kveten vigye azt a helyi hatsg ltal kijellt gyjthelyre. A termkek egyes helyeken ingyen elhelyezhetk. A termk s a csomagols jrahasznostsval segti vdeni a krnyezetet s az emberek egszsgt. A D-Link s a krnyezet A D-Linknl megrtjk s elktelezettek vagyunk a mveleteink s termkeink krnyezetre gyakorolt hatsainak cskkentsre. Az ezen hats cskkentse rdekben a D-Link a lehet leginkbb krnyezetbart termkeket tervez s gyrt azltal, hogy jrahasznosthat, alacsony krosanyag-

tartalm termkeket gyrt s csomagolsokat alkalmaz. A D-Link azt javasolja, hogy mindig kapcsolja ki vagy hzza ki a D-Link termkeket a tpforrsbl, ha nem hasznlja azokat. Ezzel segt az energia megtakartsban s a szndioxid kibocstsnak cskkentsben. Krnyezetbart termkeinkrl s csomagolsainkrl tovbbi informcikat a www.dlinkgreen.com weboldalon tudhat meg. NORSK NO Dette symbolet p produktet eller forpakningen betyr at dette produktet iflge lokale lover og forskrifter ikke skal kastes sammen med husholdningsavfall, men leveres inn til gjenvinning. Vennligst ta det til et innsamlingssted anvist av lokale myndigheter nr det er kommet til slutten av levetiden. Noen steder aksepteres produkter uten avgift. Ved p denne mten gjenvinne produktet og forpakningen hjelper du verne miljet og beskytte folks helse. D-Link og miljet Hos D-Link forstr vi oss p og er forpliktet til minske innvirkningen som vr drift og vre produkter kan ha p miljet. For minimalisere denne innvirkningen designer og lager D-Link produkter som er s miljvennlig som mulig, ved bruke resirkulerbare, lav-toksiske materialer bde i produktene og forpakningen. D-Link anbefaler at du alltid slr av eller frakobler D-Link-produkter nr de ikke er i bruk. Ved gjre dette hjelper du spare energi og redusere CO2-utslipp. For mer informasjon angende vre miljansvarlige produkter og forpakninger kan du g til www.dlinkgreen.com. D-Link COVR-2202 User Manual 101 Appendix C - Safety Statements DANSK DK Dette symbol p produktet eller emballagen betyder, at dette produkt i henhold til lokale love og regler ikke m bortskaffes som husholdningsaffald, mens skal sendes til genbrug. Indlever produktet til et indsamlingssted som angivet af de lokale myndigheder, nr det er net til slutningen af dets levetid. I nogle tilflde vil produktet blive modtaget gratis. Ved at indlevere produktet og dets emballage til genbrug p denne mde bidrager du til at beskytte miljet og den menneskelige sundhed. D-Link og miljet Hos D-Link forstr vi og bestrber os p at reducere enhver indvirkning, som vores aktiviteter og produkter kan have p miljet. For at minimere denne indvirkning designer og producerer D-Link sine produkter, s de er s miljvenlige som muligt, ved at bruge genanvendelige materialer med lavt giftighedsniveau i bde produkter og emballage. D-Link anbefaler, at du altid slukker eller frakobler dine D-Link-produkter, nr de ikke er i brug. Ved at gre det bidrager du til at spare energi og reducere CO2-udledningerne. Du kan finde flere oplysninger om vores miljmssigt ansvarlige produkter og emballage p www.dlinkgreen.com. SUOMI FI Tm symboli tuotteen pakkauksessa tarkoittaa, ett paikallisten lakien ja snnsten mukaisesti tt tuotetta ei pid hvitt yleisen kotitalousjtteen seassa vaan se tulee toimittaa kierrtettvksi. Kun tuote on elinkaarensa pss, toimita se lhimpn viranomaisten hyvksymn kierrtyspisteeseen. Kierrttmll kytetyn tuotteen ja sen pakkauksen autat tukemaan sek ympristn ett ihmisten terveytt ja hyvinvointia. D-Link ja ymprist D-Link ymmrt ympristnsuojelun trkeyden ja on sitoutunut vhentmn tuotteistaan ja niiden valmistuksesta ympristlle mahdollisesti aiheutuvia haittavaikutuksia. Nm negatiiviset vaikutukset minimoidakseen D-Link suunnittelee ja valmistaa tuotteensa mahdollisimman ympristystvllisiksi kyttmll kierrtettvi, alhaisia pitoisuuksia haitallisia aineita sisltvi materiaaleja sek tuotteissaan ett niiden pakkauksissa. Suosittelemme, ett irrotat D-Link-tuotteesi virtalhteest tai sammutat ne aina, kun ne eivt ole kytss. Toimimalla nin autat sstmn energiaa ja vhentmn hiilidioksiidipstj. Lue lis ympristystvllisist D-Link-tuotteista ja pakkauksistamme osoitteesta www.dlinkgreen.com. D-Link COVR-2202 User Manual 102 Appendix C - Safety Statements SVENSKA SE Den hr symbolen p produkten eller frpackningen betyder att produkten enligt lokala lagar och freskrifter inte skall kastas i hushllssoporna utan i stllet tervinnas. Ta den vid slutet av dess livslngd till en av din lokala myndighet utsedd uppsamlingsplats, vissa accepterar produkter utan kostnad. Genom att p detta stt tervinna produkten och frpackningen hjlper du till att bevara miljn och skydda mnniskors hlsa. D-Link och miljn P D-Link frstr vi och r fast beslutna att minska den pverkan vra verksamheter och produkter kan ha p miljn. Fr att minska denna pverkan utformar och bygger D-Link sina produkter fr att de ska vara s miljvnliga som mjligt, genom att anvnda tervinningsbara material med lg gifthalt i bde produkter och frpackningar. D-Link rekommenderar att du alltid stnger av eller kopplar ur dina D-Link produkter nr du inte anvnder dem. Genom att gra detta hjlper du till att spara energi och minska utslpp av koldioxid. Fr mer information om vra miljansvariga produkter och frpackningar www.dlinkgreen.com. PORTUGUS PT Este smbolo no produto ou embalagem significa que, de acordo com as leis e regulamentaes locais, este produto no dever ser eliminado juntamente com o lixo domstico mas enviado para a reciclagem. Transporte-o para um ponto de recolha designado pelas suas autoridades locais quando este tiver atingido o fim da sua vida til, alguns destes pontos aceitam produtos gratuitamente. Ao reciclar o produto e respectiva embalagem desta forma, ajuda a preservar o ambiente e protege a sade humana. A D-Link e o ambiente Na D-Link compreendemos e comprometemo-nos com a reduo do impacto que as nossas operaes e produtos possam ter no ambiente. Para minimizar este impacto a D-Link concebe e constri os seus produtos para que estes sejam o mais inofensivos para o ambiente possvel, utilizando meteriais reciclveis e no txicos tanto nos produtos como nas embalagens. A D-Link recomenda que desligue os seus produtos D-Link quando estes no se encontrarem em utilizao. Com esta aco ajudar a poupar energia e reduzir as emisses de CO2. Para saber mais sobre os nossos produtos e embalagens responsveis a nvel ambiental visite www.dlinkgreen.com. D-Link COVR-2202 User Manual 103 Appendix C - Safety Statements

Comments

This product uses the FCC Data API but is not endorsed or certified by the FCC